Thermostat for circulation pump STC-1000

Temperature controller with sensor

The universal controller is used in the operation of central heating pumps, circulating pumps, fans and many similar devices.

- Switching between cooling and heating modes
- Temperature regulation
- Temperature calibration
- External thermostat

- Heating - in this mode the relay is closed until the temperature rises to the set value
- Cooling - in this mode the relay is closed until the temperature drops to the setpoint
- Temperature control by setting the setpoint and hysteresis value.
- Temperature calibration.
- Compressor delay.
- Large and clear LCD display.
- Wiring diagram on the cover.
- Minimalist and lightweight construction made of the highest quality components.
- Wide temperature control range (-50 to 90 degrees C).
- Automatic alarm in case of overheating or sensor error.

Technical parameters:

- Temperature measuring range: -50 ° C - 99 ° C
- Measurement accuracy: ± 1 ° C for range (-50 ° C - 70 ° C)
- Power supply: 220VAC ± 10%, 50 / 60Hz
- Sensor: NTC sensor (1 pc)
- Load capacity of relay contacts: Cooling (10A / 250VAC), Heating (10A / 250VAC)
- Maximum contact connection power: Cooling 2.5kW, Heating 2.5kW Working
- Temperature: 0 ° C - 60 ° C
- Operating humidity: 20% - 85%
- Measurement resolution: 0.1 ° C
- Sensor error delay: 1 minute
- Power consumption: <3W
- Storage temperature: -30 ° C - 75 ° C
- Product dimensions: 75 (L) x 34 (W) x 85 (H) [mm]
- Sensor cable length: 1 meter (including sensor)