1 4

Multitester - wattmeter V-A-P-F-COSfi meter PZEM022

Multitester wattmeter - voltage measurement, current, active power, energy, frequency and power factor (COS?), operating voltage 80–260VAC, non-contact current measurement 0–100A, power up to 22000W, operating frequency 45–65Hz, accuracy class 1.0, LCD display with backlight, adjustable overload alarm, energy reset by button, data retention after switching off, dimensions 90 × 50 × 20 mm

Show full description
Will be restocked
Expected shipping: 28.09.2026 at our place
€17,89
TIPA  |  SKU: 07720311  |  Barcode: 8595563731215
Log in for VAT-free pricing

Product description

Multitester - wattmeter V-A-P-F-COSfi meter PZEM022


Product parameters:

- measurement of electrical parameters (voltage, current, active power, energy, frequency, power factor)
- overload alarm above adjustable threshold value - flashing alarm and backlight
- the measured energy can be reset using the button
- storable data after shutdown
- all data on the backlit LCD display - the backlight can be turned off


Technical parameters:

- working and measured voltage: 80 ~ 260VAC
- measured current: AC 0–100A / 22000W contactless
- operating frequency: 45–65Hz
- measurement accuracy: grade 1.0
- dimensions: 90×50×20mm


Display:

Power
range: 0.2~22000W
<10W display format: 0.00 ~ 9.99W
<100W display format: 10.0~99.9W
<1000W: 100~999W
<10000W display format: 1.00 ~ 9.90 kW
>10000W display format: 10.0 ~ 22.0kW

Energy
range: 0 ~ 999 kWh
<1kWh display format: 0 ~ 999Wh
<10kWh display format: 1.00 ~ 9.99kWh
>10kWh display format: 10 ~ 999kWh

Tension
range: 80~260VAC
display format: 80 ~ 260V

Current
range: 0.001~100AAC
<10A display format: 0.000 ~ 9.999A
>10A display format: 10.00 ~ 99.99A

Frequency
range: 45~65Hz
display format: 45~65Hz

Power factor
range: 0~1PF
display format: 0.00~1.00PF


Settings:

Power reset
- hold the button until the energy value flashes, then release. Briefly press the button to reset the value on the display.

Setting the alarm threshold
- hold the button until "SET CLr" appears on the LCD display. Then release.
- the display shows the current alarm value. The last digit starts flashing. By repeatedly pressing the button briefly, the alarm value can be changed.
- after completing the setting, press the button for 5 seconds to save. The active energy threshold range is 0.0~2.5kW.


Notice:
- this module is only suitable for indoor use.
- the applied load must not exceed the rated power
- observe the wiring according to the diagram on the back of the product

Product parameters