FNIRSI WMT-10 Moisture Meter for Wood and Other Materials

FNIRSI WMT-10 moisture meter for wood and other materials.
The FNIRSI WMT-10 is an advanced digital induction moisture meter designed for non-invasive moisture measurement in materials such as timber, plasterboard, bricks and concrete. Unlike traditional probe-type moisture meters, it does not drill holes into the material, but utilises electromagnetic induction via a built-in sensor. Technical specifications:

Key technical specifications: - measurement technology: non-contact / inductive (high-frequency sensor measuring 40.5 × 40.5 mm)
- detection depth: up to 17 mm below the surface of the material - display resolution: 0.1% with an average measurement error of ±1.5%
- Display: 2.4-inch colour TFT LCD with backlighting and excellent readability - Power supply: built-in lithium battery with a capacity of 1000 mAh, charged via USB-C

Measurement modes and ranges: - The device offers 4 basic preset modes for optimal calibration according to the material being measured: - Softwood: Range 0% to 75%
- Hardwood: Range 0% to 75% - Plasterboard / plaster walls (Plaster wall): Range 0% to 25%
- Brick walls: Range 0% to 43% Additional features: - Smart alarms: visual (colour change on the display) and audible alerts when the safe moisture level is exceeded
- Internal memory: ability to store and review up to 30 sets of measured data - Integrated torch: an LED on the rear facilitates work in dark corners, attics or on building sites
- Additional sensors: ambient air temperature gauge and battery status indicator - Automatic switch-off: saves energy by allowing you to set the device to switch off after 5, 10 or 15 minutes of inactivity Note:
For maximum measurement accuracy, a completely flat and smooth surface must be used. If the material is rough, uneven or full of air pockets, this may cause slight distortion of the results