1
of
4
Loading...
FNIRSI LCR-ST2 Component Measuring Tweezers and Tester
New
Not in stock
Regular price
€44,60
Unit price
/
Unavailable
FNIRSI | SKU:
07750304
Product description
The FNIRSI LCR-ST2 Plus is a compact 2-in-1 digital measuring tweezers and LCR/ESR tester designed for the accurate and rapid testing of both SMD and traditional through-hole components. The Plus version differs from the standard version in that the pack includes a specialised 4-wire Kelvin clip (terminals), which eliminates the resistance of the lead wires when measuring larger components.
Product specifications:
- Dual design: The interchangeable gold-plated tweezers for small SMD components can be easily detached and replaced with an adapter featuring Kelvin clips.
- Intelligent automatic recognition: The instrument automatically identifies the component type (resistor, capacitor, inductor) and selects the optimal range.
- Measurement of secondary parameters: In addition to the main value, it also displays ESR (equivalent series resistance), quality factor (Q), loss factor (D) and impedance (Z).Sweep mode (frequency scan): Allows the component to be automatically tested across the entire frequency spectrum for detailed analysis.
- Component sorting: The tolerance function (OK/NG) enables rapid testing and selection of compliant components in batches.
- Rotatable HD display: The 1.47" colour display has a built-in gyroscope and automatically rotates depending on whether you are left- or right-handed.
Technical specifications:
- Test frequencies: 100 Hz, 120 Hz, 1 kHz, 10 kHz, 100 kHz
- Test voltage (RMS): Selectable levels: 0.1 V / 0.3 V / 0.6 V / 1.0 V
- resistance (R) measurement range: 10 mohm – 10 Mohm, accuracy 0.5%±3 to 1.0%±3
- Capacitance (C) measurement range: 1 pF – 22 mF, accuracy 0.5%±3 to 2.0%±3
- Inductance (L) measurement range: 1 µH – 10 H, accuracy 0.5%±3 to 2.0%±3
- Voltage measurement: up to ±30 V DC (safe testing of voltage branches directly in the circuit)
- Diode test: up to 0.7 V
- Power supply: built-in 300 mAh lithium battery with a runtime of approx. 3 hours, charged via USB-C
Package contents:
- FNIRSI LCR-ST2 measuring tweezers
- adapter with Kelvin clamps
- set of replacement probes (straight and bent)
- shorting plate (for calibration)
- USB-C charging cable
- protective carrying case
Product specifications:
- Dual design: The interchangeable gold-plated tweezers for small SMD components can be easily detached and replaced with an adapter featuring Kelvin clips.
- Intelligent automatic recognition: The instrument automatically identifies the component type (resistor, capacitor, inductor) and selects the optimal range.
- Measurement of secondary parameters: In addition to the main value, it also displays ESR (equivalent series resistance), quality factor (Q), loss factor (D) and impedance (Z).Sweep mode (frequency scan): Allows the component to be automatically tested across the entire frequency spectrum for detailed analysis.
- Component sorting: The tolerance function (OK/NG) enables rapid testing and selection of compliant components in batches.
- Rotatable HD display: The 1.47" colour display has a built-in gyroscope and automatically rotates depending on whether you are left- or right-handed.
Technical specifications:
- Test frequencies: 100 Hz, 120 Hz, 1 kHz, 10 kHz, 100 kHz
- Test voltage (RMS): Selectable levels: 0.1 V / 0.3 V / 0.6 V / 1.0 V
- resistance (R) measurement range: 10 mohm – 10 Mohm, accuracy 0.5%±3 to 1.0%±3
- Capacitance (C) measurement range: 1 pF – 22 mF, accuracy 0.5%±3 to 2.0%±3
- Inductance (L) measurement range: 1 µH – 10 H, accuracy 0.5%±3 to 2.0%±3
- Voltage measurement: up to ±30 V DC (safe testing of voltage branches directly in the circuit)
- Diode test: up to 0.7 V
- Power supply: built-in 300 mAh lithium battery with a runtime of approx. 3 hours, charged via USB-C
Package contents:
- FNIRSI LCR-ST2 measuring tweezers
- adapter with Kelvin clamps
- set of replacement probes (straight and bent)
- shorting plate (for calibration)
- USB-C charging cable
- protective carrying case
