APS3600-24 hybrid voltage converter, DC/AC 24V/3600W

APS3600-24 Hybrid Voltage Converter, DC/AC 24V/3600W, MPPT Controller The unit combines a pure sine wave inverter, a UPS and an MPPT controller for solar panels. It is therefore a backup power supply with backup from the mains or a generator, a battery charger and an MPPT solar controller; the backup priority can also be set in reverse, i.e. prioritising the mains supply with backup from batteries or PV panels. It is therefore a multifunctional all-in-one device designed for smaller solar systems in holiday cottages, garages, etc.


Product specifications: - pure sine wave output, suitable for all appliances - MPPT solar controller for maximum energy yield from solar panels
- single-phase off-grid system without power overflow (does not operate in parallel connection mode to the mains; the mains connection serves only as a backup if the device is set up accordingly)
- clear and customisable LCD display - selectable operating modes and power source priority - adjustable operating parameters as required - integrated short-circuit and overload protection
- protection against overheating, overcharging and excessive battery discharge - compatible with AGM and GEL batteries, or LiFePO4 (for experienced users only)
- the battery can be automatically recharged from the mains if solar power is not available - audible alerts for fault conditions and malfunctions - cold start and energy-saving mode functions - powerful active cooling Technical specifications:

- Mains input voltage: 90–280 V AC (170–280 V AC for UPS function) - Frequency: 50 / 60 Hz (auto-detection) - Output: 1-phase, 230 V AC ±5%
- inverter power: 3600 W / 3600 VA - peak power: 5000 W for 5 seconds - switching delay: <10 ms - output waveform: pure sine wave
- Nominal battery voltage: 24 V - Battery charging mode: CC / CV / Fload - Float voltage: 27 V - Maximum battery charging voltage (lead-acid): 29.2 V
- battery type: AGM, GEL, LiFePO4 (for experienced users only) - maximum charging current from the mains: 100 A (preset to 30 A)
- Maximum charging current from MPPT controller: 100 A - Maximum total charging current (MPPT + mains): 100 A - Maximum panel power: 5,000 W
- Max. solar panel voltage (Voc): 500 V DC - Max. solar panel current: 18 A
- MPPT controller operating voltage range: 40 – 450 VDC - Inverter power supply priority: solar only / UPS / mains-backed battery - Charging priority: solar / mains / solar + mains / solar only
- Power consumption: 30–50 W in active mode - Standby: 2 W (in this mode, the battery is charged by the MPPT controller) - Efficiency: 98%
- Dimensions: 420 x 284 x 94 mm - Operating temperature: -10 to 60°C - Net weight: 6 kg - Protection rating: IP43 This product requires professional installation.