Tipa

The Procraft SPI-320 welding inverter is designed for manual welding using MIG and MAG methods. IGBT power transistors guarantee long trouble-free operation. Welding current regulation in the range of 20-160 A allows you to set optimal parameters when working with different metals. Welding wire with a diameter of 0.6 to 1.0 mm can be used. It allows welding with inert or active gases. The current welding current is displayed using the LCD display. The delivery includes welding wire 0.8 mm (5 kg drum), MIG torch with cable, welding shield, cable with electrode holder, cable with grounding clamps and wire brush combined with slag hammer.

For welding methods:

MMA (coated electrode)

MIG/MAG (CO2 etc., gas welding)

FCAW-Flux (cored flux cored wire, no gas required)

TIG-Lift (non-consumable electrode – Requires purchase of TIG torch)

Functions:

HOT START - facilitates arc ignition by initially automatically increasing the ignition current compared to the originally set welding current

ARC FORCE - stabilization of the ignited welding arc during welding depending on the length of the welding arc. If the electrode sticks when the arc is shortened, the inverter increases the current. In the case of a long arc, the inverter reduces the current, which creates time for the electrode to approach the material without the arc going out

ANTI STICK - automatic reduction of the welding current to a minimum if the electrode sticks, which cools the electrode and can then be easily torn off

Technical parameters:

Voltage, V: 220-240
Frequency, Hz: 50
For welding wire Co2: 0.6, 0.8, 1.0 mm (5 kg spool), flux cored wire (reversal)

Weight, kg: 14
Current regulation range (A): 20-160
Duty cycle at maximum current (%): 40% at 40 °C
Power consumption (kW): 5.3
Welding wire diameter (mm): 0.6- 1.0
Welding electrode diameter (mm): 1.6- 4.0
Protection degree: IP21S
Efficiency (%): 85
Roller diameter, mm: 200
Welding torch cable length, m: 3
Electrode holder (max. current, cable length): 200 A, 2.8 m
Earth cable (max. current, cable length): 300 A, 2.2 m
Feed speed, m/min: 2.5-12
40% load: 160A
60% load: 113A / 19.65V
100% load: 88A / 13.4V