Tipa

Fully programmable sine wave inverter 12V/2000VA with built-in Bluetooth, wireless settings and ECO mode.


Product parameters:

High starting power
The power required to start loads such as power converters for LED lamps, halogen lamps or power tools.
The drive incorporates a robust toroidal transformer which has proven its reliability in Victron Energy drives for many years.
The inverters are short-circuit proof and protected against overheating, whether due to overload or high ambient temperature.

Built-in Bluetooth technology and Victron Connect App
This inverter has built-in Bluetooth technology and is fully configurable via tablet or smartphone. This is a completely unique function and you can therefore set the parameters of the converter and monitor the operation simply wirelessly.

Setting options:
• Low battery voltage alarm
• Setting the voltage level for switching off and restarting the inverter when the battery is discharged
• Dynamic disconnection from the battery during discharge: the voltage level for disconnection is dependent on the size of the load
• Output voltage: 210 - 245V
• Frequency: 50 Hz or 60 Hz
• ECO mode on / off and ECO shooting level
• Alarm relay

Monitoring:
• Input and output voltage, load level and alarms

Download the application for free under the name VictronConnect app in the App Store or Google Play.
The application can be downloaded from this software page of the manufacturer Victron Energy:

If you prefer to set up and monitor via cable and PC, the inverter is equipped with a VE.Direct communication port that you can connect to using a VE.Direct to USB cable

ECO mode
In ECO mode - when the load power drops below the preset value, the inverter switches to standby mode (it goes to sleep and the inverter's own consumption is then only approx. 0.6W). In standby mode with very low self-consumption, the inverter will then switch on periodically for a short time (adjustable parameter, default: every 2.5 seconds). If the load power exceeds the preset value, the inverter will turn on again. Thanks to this function, you save a large amount of energy that the inverter would otherwise consume for its operation.

Remote on/off
A remote on/off switch or relay contact can be connected to the two-pole connector.

Cables for connecting to the battery are not included.


Technical parameters:

- continuous output power at 25°C (VA): 2000
- continuous active power at 25 °C / 40 °C (W): 1600 / 1450
- peak active power (W): 4000
- weight (kg): 13
- dimensions h x w x d (mm): 485 x 219 x 125

Technical specifications can be found in the downloadable documents below.