Tipa

High-quality fixing adhesive based on butyl. Can be applied even at lower temperatures down to -5 °C. The adhesive has a high initial adhesion and a long open time (45 minutes).

Technical parameters:

- Volume: 400ml
- Color: yellowish

Characteristics
- based on butyl
- attaching vapor barriers and foils to SDK profiles and to each other
- long open time
- possibility of dispersion regulation
- thin-film bonding

Use
- thin layer bonding
- fixation and gluing of vapor barrier foils on metal profiles
- bonding to mineral wool
- the possibility of fixing foils between each other
- Hazard identification

DEBBEX Fixation of vapor barriers (EU)
- Signal word: DANGER
- H317 - May cause an allergic skin reaction.
- H229 - Container is under pressure: may burst when heated.
- H222 - Extremely flammable aerosol.
- H315 - Irritating to skin.
- H411 - Toxic to aquatic organisms, with long-term effects.
- H336 - May cause drowsiness or dizziness.
- P210 - Keep away from heat, hot surfaces, sparks, open flames and other sources of ignition. No smoking.
- P102 - Keep out of reach of children.
- P211 - Do not spray on open flames or other sources of ignition.
- P280 - Wear protective gloves/protective clothing/safety glasses/face shield/hearing protection/...
- P101 - If medical attention is needed, have the product's container or label at hand.
- P101 - If medical attention is needed, have the product's container or label at hand.
- P410/412 - Protect from sunlight. Do not expose to temperature exceeding 50°C/ 122°F.
- P501 - Remove contents/container ...
- P273 - Avoid release to the environment.
- P302/352 - IF ON SKIN: Wash with plenty of water.
- P251 - Do not puncture or burn even after use.
- P391 - Collect spilled product.
- Composition: acetone, dimethyl ether, rosin, n-hexane, zinc oxide, Hydrocarbons, C6-C7, n-alkanes, isoalkanes, cyclic, <5% hexane.