Tipa

The TIPA ZD-20E hand soldering pen is excellent for small soldering out of the reach of the 230 V mains. It can be powered by three AA pencil batteries, either primary batteries or accumulators, or via a micro USB connector from a computer or power bank. The heating element has a power input of 8W at a voltage of 4.5 V and will allow the soldering tip to heat up in 15 seconds. The heating is switched on by a sliding safety switch and a button. If we use 1.2V / AA rechargeable batteries for operation, it is possible to charge them directly in the soldering iron via the USB connector and a full charge takes about 2 hours. The solder cannot be used during charging.
The delivery includes a plastic box with a tubular soldering tin, a cover for a soldering tip and a micro USB / USB cable.


Product parameters:

- soldering pen with a fine tip allows soldering without the need for 230 V AC
- tip heating time 15 seconds, cooling time 30 seconds
- power supply of primary battery 3pcs 1.5V / AA or rechargeable NiCd / NiMH accumulators 1.2V / AA, or USB from Power bank
- the possibility of charging the batteries directly in the handle with a USB cable from a PC or Power bank
- sliding safety switch prevents unintentional activation after soldering
- the package includes a removable USB cable, solder wire and safety cover
- soldering tip and heating element 8W / 4.5V form one unit with


Technical parameters :

- power supply 3x1.5V / AA or 3x 1.2V / AA or USB
- charging of batteries via USB input in 2 hours
- power consumption of the heating element 8W / 4.5V
- safety slide switch and button
- heating time less than 15 seconds, cooling time in 30 seconds
- indication of ongoing tip heating by LED
- indication of battery charging by LED at the USB connector
- dimensions: 180 x 35 x 20 mm

Package contents :

- soldering pen ZD-20E in a double blister
- fine soldering tip with heating element
- tubular tin in a box
- soldering tip cover
- removable micro USB / USB cable length approx. 17cm


Packaging for wholesale customers:

- carton content: 100 pcs
- carton dimensions: 480 x 280 x 530 mm
- gross weight: 9 kg






- It can powered either by 3 x1,5V/AA non chargeable batteries (not included) or by 3 x 1,2V/AA chargeable bateries (not included)
- A detachable USB cord, a soldering wirw and a safety cap are included.
- Fine soldering tip heats up in less than 15 seconds a cool down in 30 seconds.
- Slider safety switch prevents accidental activation when charging is finishid.
- The internal chageable batteries can be charged via the USB interface on the handle.
- You can connect it with the computer or power bank to recharge the batteries.
- The rechareeable batteries power can befully charged in 2 hours.
Do not use in when charging.
Model ZD-20E
Code 88-2093
Power 8W
Package : Double blister
Code 79-0001 2 in 1 non- detachable heater with tip. With the USB cord, this item can be convenienly power recharged by computer or power bank. Power indicator.
Slider safety switch.