Tipa

Flexible monocrystalline panel with 12V and USB output for charging batteries, phones, powerbanks, etc. The ideal solution for your car battery in the event of a longer downtime of the vehicle, when permanently connected appliances such as the control unit, car radio or remote control can discharge the starter battery in just a week. Plug the included cable into a 12V socket (permanent connection to the battery required, not the ignition switch), place the panel behind the window with suction cups and your battery will be supplied with the necessary energy to compensate for the consumption of connected devices and self-discharge. The panel can also be used as a backup source for charging phones, powerbanks, etc.

Technical parameters:

Max. Power: 50W
Max. Current at full power (Imp): 2.78A
Max. Output voltage at full power (Vmp): 18V
Output for charging 12V battery: voltage Vmp-max.18V
USB output: max. 5.1V / 2.1A
LED: illuminates at maximum exposure, flashes at low exposure
Dimensions: 540 × 560 × 2mm


Package contents:
1 × flexible panel
4 × removable suction cup
1 × 12V cable with car connector
1 × 12V cable with terminals
1 × USB cable with 10 different terminals (USB mini, USB micro, iPhone, Nokia DC jack, etc.)

Notice:
The PV panel is equipped with a step-down converter for powering the USB output, the output does not have a 12V controller. However, depending on the performance of the panel, you can connect the battery above 60Ah directly and permanently without the risk of damaging it. Use any PWM controller for 60Ah batteries and only in case of long-term exposure. For a few hours, batteries can be connected without a regulator, which can withstand a charging current of max. 2.78A.