Tipa

Sanitary silicone 313c PENOSIL is an acetoxide multipurpose sanitary silicone sealant for waterproof sealing in wet and humid areas.
Resistant to mould, UV radiation and aging
Resistant to household chemicals
Waterproof up to 30 minutes
Permanent color
Non-falling
Great workability
Permanently elastic
Easy to clean

USE
Sealing joints in wet and damp rooms.
Sealing joints between tiles and walls, sinks, WC, bath and shower taps and shower cubicles.

APPLICATION PROCEDURE
Application temperature between +5°C and +40°C.

SURFACE PREPARATION
The surfaces must be dry, clean and free of dust, loose particles and oil.
Non-porous surfaces should be cleaned with solvent and a clean, lint-free cotton cloth.

USE
Cut off the tip of the cartridge.
Screw on the nozzle and cut a hole at a 45° angle slightly larger than the joint to be sealed.
Place the cartridge in the caulking gun.
Apply the sealant by maintaining even pressure on the trigger of the gun and smoothly pulling the nozzle along the joint.
Remove excess sealant and smooth the surface with a suitable tool.

CLEANING
Unhardened sealant can be cleaned with solvents such as white spirit, acetone, or special cleaning wipes.
Hardened sealant can be removed mechanically. A silicone remover should be used if necessary.

Technical parameters:

Density: 1.06 g/ml
Application temperature: +5 to +40°C
Color: White

Storage conditions
Guaranteed shelf life of 18 months from the date of manufacture when stored in closed original packaging in a
in a dry place protected from direct sunlight at temperatures of +5°C to +30°C.

Safety conditions
Ensure adequate ventilation and use necessary personal protective equipment during application.