{"product_id":"multimetr-uni-t-ut622c","title":"Multimeter UNI-T UT622C","description":"The UT622C LRC device is a hand-held meter of components - coils (inductance), resistors (resistance) and capacitors (capacitance) and their secondary properties: D (loss factor), Q (quality factor), ? (phase angle in degrees), ? (phase angle in radians) and ESR (equivalent series or parallel resistance). The parameters of the components are measured by alternating voltage with a selectable frequency of 100, 120, 1000, 10000 Hz, 100kHz and a selectable amplitude of 0.1Vrms, 0.3Vrms, 1.0Vrms at the output impedance of the signal source 100?. The highest measurement accuracy is 0.1%.\u003cbr\/\u003eThe device has an intuitive TFT LCD display with a diagonal of 2.8 inches and adjustable backlight brightness in ten levels, a built-in large-capacity Li-Pol battery 1800mAh and a miniUSB connector for charging and data transfer to a PC. The maximum display value when measuring primary parameters is 99999 and the minimum value when measuring secondary parameters is 0.0001. Measurement mode - one measurement triggered by the TRI button or a command from the PC; or continuous measurement with adjustable test trigger speed 20x\/sec, 5x\/sec, 2x\/sec. Configuration of 2+1 or 4+1 terminals (with the UTR-L100k-H test cables included in the delivery of this device). \u003cbr\/\u003eDue to its technological sophistication, the device is also suitable for professional purposes - in connection with a computer (PC), it creates a station for sorting components according to the specified tolerance parameters and can be used in production lines, laboratories, etc.\u003cbr\/\u003e\u003cbr\/\u003e\u003cbr\/\u003eProduct parameters :\u003cbr\/\u003e\u003cbr\/\u003e- manual RLC meter of primary and secondary parameters of components\u003cbr\/\u003e- large backlit, intuitive TFT LCD display, 10 levels of brightness\u003cbr\/\u003e- the diple range is a maximum of 99999\u003cbr\/\u003e- highest accuracy 0.1%\u003cbr\/\u003e- the possibility of selecting components according to the specified tolerance\u003cbr\/\u003e- measurement with alternating voltage 100, 120, 1000, 10000 Hz or 100kHz\u003cbr\/\u003e- selectable amplitude meas. voltage 0.1Vrms, 0.3Vrms, 1.0Vrms\u003cbr\/\u003e- selection of equivalent mode (for Z \u003c100? serial, for Z \u003e10k? parallel)\u003cbr\/\u003e- automatic component identification\u003cbr\/\u003e- built-in large-capacity Li-Pol battery: \t\t\t3.7V\/1800 mAh\u003cbr\/\u003e- power supply + charging: \t\t\t\tadapter DC 5V ±0.25V, \u003e1A\u003cbr\/\u003e- operation on one battery charge: \t\t\ttypically 8 hours\u003cbr\/\u003e- functions in data recording and statistics mode: \t\tAVG, MAX, MIN\u003cbr\/\u003e- sound tone when pressing buttons: \t\t\tyes, can be turned off \/ on\u003cbr\/\u003e- option to lock buttons: \t\t\t\tyes\u003cbr\/\u003e- automatic shutdown: \t\t\t\tyes, after 5, 15, 30, 60 minutes, or off\u003cbr\/\u003e- data interface: \t\t\t\t\tmini USB\u003cbr\/\u003e- data transfer rate to PC: \t\t\t\t9600\/19200\/38400 Baud\u003cbr\/\u003e- acoustic and optical alarm comparing tolerance results: \toff, passes, does not pass\u003cbr\/\u003e- sound alarm selection: \t\t\t\tshort beep, long beep, two short beeps\u003cbr\/\u003e- resetting the tester in the event of an open or shorted circuit: \tyes\u003cbr\/\u003e- tolerance value setting from nominal: \t\t\t1% to 20%, default 5%\u003cbr\/\u003e- counting of components: \t\t\t\tall, compliant, non-compliant\u003cbr\/\u003e\u003cbr\/\u003e\u003cbr\/\u003eTechnical parameters :\u003cbr\/\u003e\u003cbr\/\u003e- Measurement range of primary impedance parameters:\u003cbr\/\u003etype \/\/ display range \/\/ minimum resolution on the range\u003cbr\/\u003einductance L \/\/ 0.001 µH to 9999.9 H \/\/ 1 \/ 0.1 \/ 0.01 \/ 0.001 µH\u003cbr\/\u003ecapacitance C \/\/ 0.001 pF to 99.999 mF \/\/ 1 \/ 0.1 \/ 0.01 \/ 0.001 pF\u003cbr\/\u003eresistance R \/\/ 0.0001 ? to 99.999 M? \/\/ 0.0001 ?\u003cbr\/\u003e      general impedance Z \/\/ 0.0001 ? to 99.999 M? \/\/ 0.0001 ?\u003cbr\/\u003e\u003cbr\/\u003e- Measurement range of secondary impedance parameters:\u003cbr\/\u003etype \/\/ display range \/\/ minimum resolution on the range\u003cbr\/\u003e                          loss factor D \/\/ 0.0001 to 9.9999 \/\/ 0.0001\u003cbr\/\u003e                            quality factor Q \/\/ 0.0001 to 99999 \/\/ 0.0001\u003cbr\/\u003ephase angle in degrees ? deg \/\/ -179.9° to 179.99° \/\/ 0.01°\u003cbr\/\u003ephase angle in radians ? rad \/\/ -3.142 rad to 3.1416 rad \/\/ 0.001 rad\u003cbr\/\u003e              equivalent resistance ESR \/\/ 0.01 m? to 999.99 ? \/\/ 0.01 m?\u003cbr\/\u003e\u003cbr\/\u003e\u003cbr\/\u003e- display: \t\t\t\t\t\tbacklit TFT LCD display with a diagonal of 2.8\" with a resolution of 320 x 240 pixels\u003cbr\/\u003e- display range: \t\t\t\t\tmaximum 99999\u003cbr\/\u003e- accuracy: \t\t\t\t\tbest 0.1%\u003cbr\/\u003e- selection of components according to the set tolerance: \tyes\u003cbr\/\u003e- voltage measurement: \t\t\t\tAC 100, 120, 1000, 10000 Hz or 100kHz\u003cbr\/\u003e- amplitude meas. voltage: \t\t\t\t0.1 Vrms, 0.3 Vrms, 1.0 Vrms\u003cbr\/\u003e- data transfer to PC: \t\t\t\tyes, after installing the software on the PC\u003cbr\/\u003e- power supply: \t\t\t\t\tLi-Pol battery 1800mAh and\/or adapter DC 5V ±0.25V, \u003e1A\u003cbr\/\u003e- automatic charging management: \t\t\teven when the device is switched off\u003cbr\/\u003e- charging and data interface: \t\t\t\tmini USB\u003cbr\/\u003e- working environment: \t\t\t\ttemperature 5 to 35°C, humidity ?80%°C\u003cbr\/\u003e- weight without batteries \/ with accumulator: \t\t305g \/ 420g\u003cbr\/\u003e- product dimensions (H x W x D): \t\t\t192 x 93 x 44 mm\u003cbr\/\u003e- package dimensions: \t\t\t\t225 x 220 x 63 mm\u003cbr\/\u003e- safety and EMC certification: \t\t\t\tIEC\/EN61010-1: 2010, EN61326-2: 2013, EN61326-2-2: 2013\u003cbr\/\u003e\u003cbr\/\u003e\u003cbr\/\u003eContents of individual packaging :\u003cbr\/\u003e\u003cbr\/\u003e- device UT622C: \t\t\t\t\t1 pc\u003cbr\/\u003e- USB interface cable: \t\t\t\t1 pc\u003cbr\/\u003e- power adapter 5V\/1A: \t\t\t\t1 pc\u003cbr\/\u003e- four-pole test cables UTR-L100k-H: \t \t\t1 pc\u003cbr\/\u003e- gold-plated short circuit board UTR-001: \t\t1pc\u003cbr\/\u003e- instructions for use: \t\t\t\t1 pc\u003cbr\/\u003e\u003cbr\/\u003e\u003cbr\/\u003ePackaging for bulk customers :\u003cbr\/\u003e\u003cbr\/\u003e- standard quantity per carton: \t\t\t\t10 pcs\u003cbr\/\u003e- standard carton dimensions: \t\t\t\t370 x 305 x 475 mm\u003cbr\/\u003e- gross weight of the carton: \t\t\t\tapprox. 13.2 kg\u003cbr\/\u003e\u003cbr\/\u003e\u003cbr\/\u003eMANUFACTURER: UNI-TREND\u003cbr\/\u003ewww.uni-t.cz\u003cbr\/\u003e\u003cbr\/\u003e\u003cbr\/\u003e","brand":"UNI-T","offers":[{"title":"Default Title","offer_id":52541920739666,"sku":"07720300","price":6850.0,"currency_code":"CZK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0954\/9624\/1490\/files\/07720300_5aa45e36-0622-4120-b2da-b7c39843e664.png?v=1787843897","url":"https:\/\/tipa.eu\/en\/products\/multimeter-unit-ut622c-1","provider":"TIPA","version":"1.0","type":"link"}