Tipa

A liquid product used to prevent the growth of algae and eliminate them. Works on most algae found in swimming pools.

Use biocides in a safe manner. Always read the label and product information before use.

Instructions
Dispense the product into the pool with the filter device switched on. After filling the pool, apply the initial dose. If there is still visible algae growth, repeat the initial dose in 48 hours after the algae remains have been removed from the pool. During the season, add a maintenance dose once a week, in hot weather or during intensive use of the pool, dose in shorter time intervals. At the end of the swimming season, add a maintenance dose of the product to the water remaining in the pool. This dose is a measure against algae growth during the winter period and will facilitate the preparation of the pool for the following season.

Dosage
Initial dose of 30 ml per 1 m3 (1000 l) of water. Maintenance dose – 10 ml per 1 m3 of water.

Hazard identification
Signal word: WARNING

H410 Highly toxic to aquatic life, with long-term effects.

P101 If medical attention is needed, have product container or label at hand.
P102 Keep out of reach of children.
P501 Dispose of contents/container to hazardous waste!
P273 Avoid release to the environment.
P280 Wear protective gloves.
P314 Get medical advice/treatment if you feel unwell.
P301+P330+P331 IF SWALLOWED: Rinse mouth. DO NOT induce vomiting.
P305+P351+P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if worn and if they can be removed easily. Continue rinsing.
P302+P352 IF ON SKIN: Wash with plenty of water.
P391 Collect spilled product.