Due to the amendment of the VAT legislation under the EU Directive, all foreign sales to end/ retail customers are currently suspended. B2B transactions remain unchanged.
The UT60BT is a digital multimeter with a display range of 9999, which allows the measurement of true RMS values of voltages and currents with automatic and manual range selection. It has 1000V rms overload protection on all ranges, the current range is protected by a 10A / 1000V, 6.35 x 32mm tubular fuse. If you approach the limit values ≥990.0V / ≥9.900A when measuring voltages and currents, an alarm sounds and the "OL" character is displayed when the limit values are exceeded. It also allows the measurement of resistance, capacity, temperature, frequency, duty cycle, circuit continuity and semiconductor junctions. The circuit is optimized for non-contact electric field measurement in two subranges. The multimeter is equipped with a modern processor with a fast analog-to-digital converter (3 times / s conversion) and with the transmission of measured values via Bluetooth via low-energy wireless technology 802.15.4. , to a mobile phone or tablet with the Connect application installed.
The entire construction of the multimeter is equipped with a durable cover with double insulation and has European CE certification and meets the safety classification CAT II 1000V / CAT III 600V. The device is suitable for work in a laboratory or workshop, as well as for common electrical practice. It is powered by standard batteries 3 pcs x 1.5V, AAA, which thanks to low consumption lasts up to 500 hours.
Product parameters :
- backlit display range: 9999 - voltage measurement: up to ± 1000V / DC / AC rms - current measurement: up to ± 10A / DC / AC rms - resistance measurement: up to 99.99MΩ - capacity measurement: up to 9,999mF - temperature measurement: with supplied type K probe up to 250 ° C - frequency measurement: up to 9.999MHz - duty cycle measurement: up to 1kHz - measurement modes: auto / manual / REL / RMS / HOLD / NCV EFLo / NCV EFHi - circuit continuity measurement - measurement of semiconductor junctions - non-contact NCV measurement - optical and acoustic alarms - Bluetooth for transmission of measured data - protection of voltage inputs against overload above 1000V - protection of current input 10A by fast fuse - input impedance approx. 10MΩ for DCV, in the DCmV range then 3GΩ - power supply: 3 x 1.5V, AAA - consumption in low power consumption during measurement: about 2 mA - sleep consumption: <30 μA - operation on one set of batteries: 500 hours - low battery indication: yes - automatic shutdown (sleep on inactivity): yes, after 15 minutes
Technical parameters :
- DC voltage measurement (input impedance is about 3GΩ in the DCmV range, 10MΩ in other ranges): (range / resolution / accuracy) 9.999 mV / 0.001mV / ± (0.7 % + 8) 99.99 mV / 0.01 mV / ± (0.7 % + 8) 999.9 mV / 0.1 mV / ± (0.5 % + 3) 9.999 V / 0.001 V / ± (0.5 % + 3) 99.99 V / 0.1V / ± (0.5 % + 3) 999.9 V / 0.1V / ± (0.5 % + 3) - Maximum input voltage: ± 1000V, alarm sounds at 990.0V, "OL" is displayed at >1000V. - Overload protection 1000V RMS (DC / AC)
- AC voltage measurement (input impedance approx. 10MΩ,): (range / resolution / accuracy in the range 40Hz to 400Hz, sine RMS) 9.999 mV / 0,001mV / ± (1 % + 3) 99.99 mV / 0,01 mV / ± (1 % + 3) 999.9 mV / 0,1 mV / ± (0,8 % + 3) 9.999 V / 0,001 V / ± (0,8 % + 3) 999.9 V / 0,1V / ± (0,8 % + 3) - Maximum input voltage: AC1000V, alarm sounds at 990.0V, "OL" is displayed at >1000V. - Overload protection 1000V RMS (DC / AC)
- DC current measurement: ( range / resolution / accuracy) 999.9 μA / 0.1 μA / ± (0.8% + 3) 999.9 mA / 0.1 mA / ± (1.0% + 3) 9.999 A / 0.001 A / ± (1.0% + 3) - Alarm sounds at ≥9,900A, "OL" is displayed at >10.00 A. - Overload protection: 1000V RMS, fast fuse 10A
- AC current measurement: ( range / resolution / accuracy in the range of 40Hz to 400Hz) 999.9 μA / 0.1 μA / ± (1.0% + 3) 999.9 mA / 0.1 mA / ± (1.2% + 3) 9.999 A / 0.001 A / ± (1.2% + 3) - Alarm sounds at ≥9,900A, "OL" is displayed at >10.00 A. - Overload protection: 1000V RMS, fast fuse 10A
- Diode test: voltage at terminals without load about 3.3 V the voltage drop at a good silicon junction is 0.5 to 0.8 V measurement resolution 0.001 V
- Circuit continuity test: the buzzer tone will not sound if the resistance is greater than 30 Ω the tone sounds if the resistance is less than 30 Ω Overload protection 1000V RMS (DC / AC)
- Temperature measurement: ( range / resolution / accuracy ) -40 ° C to 0 ° C / 1 ° C / ± 4 ° C 0 ° C to 100 ° C / 1 ° C / ± (1.0% + 5) 100 ° C to 1000 ° C / 1 ° C / ± (2.0% + 5)
-40 ° F to 32 ° F / 1 ° F / ± 5 ° F > 32 ° F - 212 ° F / 1 ° F / ± (1.5% + 5) > 212 ° F - 1832 ° F / 1 ° F / ± (2.5% + 5) The K-type thermocouple in the accessory is only usable for measuring temperatures below 250 ° C / 482 ° F. 1000 V RMS overload protection (DC / AC)
General characteristics :
- ambient operating temperature: 0 ° C to 40 ° C - storage temperature: -10 ° C - 50 ° C (14 ° F - 122 ° F) - working relative humidity: ≤75% (0 ° C to 30 ° C), ≤50% (30 ° C to 40 ° C) - working altitude: 0 to 2000m - environment of use: indoor use - EMC resistance: for radio frequency field 1V / m - power supply: 3 x 1.5V, AAA - product color: red and gray - net product weight: 290 g - product weight: about 400g (including batteries) - product size: 169 x 81 x 46 mm
Contents of individual packaging :
- UT60BT multimeter with storage case: 1pc - battery 1.5V, AAA: 3pcs - fuse F1: F 10A / 250V (6.35 x 32mm) - in the device: 1pc - test cables with spikes in category CAT II 1000V / CAT III 600V: 1pair - temperature probe: 1pc - instructions for use: 1pc
Wholesale packaging :
- standard quantity in a carton: 20pcs - standard carton size: 420 x 320 x 300 mm
Cash on delivery 
cash 
Online 
bank transfer 
Nobody has entered comment on this product yet. Be first!