Tipa

This motion sensor, with which you can easily automate outdoor and indoor lighting, ensures comfortable and safe movement in the dark. Thanks to automation, the lamp will only turn on when you really need it, so you can save a significant amount of energy. The lamp turns on automatically when moving and turns off after the set time. There is no need to reach for the switch in the dark, the sensor detects movement from a distance. The device can be adjusted according to your needs, so it is possible to adjust the length of the switching time and the measurement of the ambient lighting. Individual functions can be controlled and adjusted remotely using the included remote control.

Attention: The wiring and installation of the product should be done by an expert, always follow the electrical safety regulations and rules of the country. The connection to the electrical network must always be done by an expert! Before connecting, disconnect the circuit from the voltage! When installing the device, pay attention to the markings on the back of the device. The inscription "UP" indicates the upper part of the device. Pay attention to the installation in accordance with the IP protection! Use a cable with a suitable cross-section! Do not exceed the maximum possible load! The manufacturer and distributor do not accept any responsibility for damages and injuries caused by incorrect installation!

- Discreet appearance
- Can be installed on the ceiling and on the side wall
- With remote control
- Adjustable sensitivity, lighting duration and ambient light measurement
- Protection class IP65

Technical parameters:

- Detection angle: 360°
- Detection distance: Max. 10 meters
- Lighting time: 10 seconds - 30 minutes
- Power source: Motion detector: 220 - 240 V AC, 50/60 Hz
- Remote control: CR2032 3V battery (included)
- Max. load: 2000 W
- Ambient light detection: 5 - 2000 Lux
- Protection class: IP65 (exterior)
- Dimensions: 102 x 102 x 60 mm
- Material: Plastic
- Color: White
- Weight: 150 g