Due to the amendment of the VAT legislation under the EU Directive, all foreign sales to end/ retail customers are currently suspended. B2B transactions remain unchanged.
First-class cement waterproofing under tiles and paving. The ideal waterproofing coating for balconies, terraces, loggias, basements, but also for bathrooms, showers and other areas.
Liquid cardboard 2K waterproofing is supplied in a ratio of 3:1 (weight ratio of dry B and liquid A). The preparation takes place by gradually mixing the dry component B into the liquid component A with the addition of water up to a maximum of 5%. We mix by hand or by machine with a small number of revolutions, approx. 250 revolutions/minute, until the mixture is well homogenized. When mixing by machine, let stand briefly and then stir from below with a trowel or other tool to release air bubbles. Apply to the prepared base with a brush or roller, in at least two layers. We apply the layers using the so-called cross method. 1st layer from left to right and 2nd layer from top to bottom (or vice versa). The corners and corners are reinforced with expansion tape, which is inserted into the first layer. The base layer must be sufficiently hardened after approx. 12 hours for masonry, 24 hours for tiles and paving.
Where does it fit? for interior and exterior waterproofing of balconies, terraces, loggias, bathrooms and others insulation against radon on masonry, concrete, plasterboard and other surfaces
How to proceed? clean the substrate and properly penetrate it thoroughly mix both components in the right proportion apply to the prepared substrate in at least two layers using a roller or brush sealing strips or corners are inserted into the live first layer
What does it excel at? first-class waterproofing resistant to lime and chlorinated water highly and permanently flexible insulation against radon low consumption of 1.5 kg/m2 in two coats resists even pressurized water on horizontal and vertical structures
Watch out for what? properly prepared background it is not intended as a final surface finish must be protected from rapid drying it must not come into direct contact with metal, the metal must be covered with e.g. Fleeceband
Hazard identification EUH208 Contains a reaction mixture of: 5-chloro-2-methylisothiazol-3(2H)-one [EC number 247-500-7] and 2-methylisothiazol-3(2H)-one [EC number 220-239-6] (3 :1). May cause an allergic reaction. EUH210 Safety data sheet available on request. The treated article contains CMIT/MIT (3:1), 2,2-dibromo-2-cyanoacetamide, bronopol and 1,2-benzoisothiazol-3(2H)-one.
Cash on delivery 
cash 
Online 
bank transfer 
Nobody has entered comment on this product yet. Be first!