Tipa

This LED neon flexible tube provides a very simple and extremely flexible LED neon lighting system for 230V. Thanks to the high IP67 protection against moisture and temporary immersion in water, it is suitable for all indoor and outdoor installations without the need for a power supply connection. This LED neon flexible tube is equipped with high-quality LED chips in a full plastic rounded tube with a lifetime of up to 100,000 hours. It creates the effect of conventional neon light with other benefits, including: easy installation, no danger of electric shock, low maintenance cost and low power consumption.

One roll contains 50 strips, each 100 cm long. Separate the required length at the marked points, connect the main lead and the end cap and your neon light effect is ready for use. The tube can only be connected in whole meters. You can connect up to 50m of tube to one flexi cord.
To install, use a flexo cord with a rectifier:
08740072 - Flexo cord for PVC neon hose 230V, 0.5m
08740073 - Flexo cord for PVC neon hose 230V, 3m

Close the end of the tube with a cap. To maintain the IP67, silicone sealant must be applied to joints and ends.

Instalation should only be carried out by an authorized electrician. Do not make any adjustments unless you are qualified or authorized to do so.


Technical parameters:

- voltage: AC 230V
- consumption: max. 7W / m
- number of LED: 92 / m
- colour: green
- luminous flux: 20-22 lm / LED
- IP protection: IP67 (temporary immersion in water)
- temperature range: -25 ° to 85 ° C
- length of the whole reel: 50m
- module length: 1m
- dimensions: 16.4 mm x 8 mm x 50 m (maximum length)