Tipa

EasyPlus C is similar to MultiPlus C 12V/1600VA/70A-16A converter/charger. In addition, it has fuse protection on the AC input and four separate AC outputs with current protection and separate circuit breakers.

Technical parameters:
- working DC voltage: 12 V
- continuous AC power at 25 °C: 1600 VA (non-linear load, swing factor 3:1)
- continuous AC power at 25 °C: 1300 W
- maximum charging DC current: 70 A
- maximum AC current draw (from mains, generator): 16 A

Multifunctional
EasyPlus is a powerful DC-AC inverter with a pure sinusoidal output voltage, with a sophisticated adaptive battery charger and an ultra-fast power loop switch. The inverter is housed in an aluminum compact housing.

Fuse on AC input
EasyPlus is equipped with a circuit breaker at the AC input, which distinguishes it from MultiPlus.
Four AC outlets
EasyPlus is equipped with four AC outputs. One output ensures the supply of energy to the appliances only in case of connection to the network (connection of a boiler, for example). Appliances connected to this output are not powered by batteries. The other three outputs are equipped with a function that ensures uninterrupted power supply. MultiPlus takes over the power supply of the connected appliances in the event of a mains or generator failure. This happens so quickly (less than 20 milliseconds) that computers and other electronic devices will continue to function without interruption. All outputs are equipped with a current protector and circuit breakers on the front of the device, which is the main difference from the similar MultiPlus device.
Virtually unlimited performance thanks to parallel operation
Up to 6 EasyPluss can work in parallel connection with a total power of up to 7.8 kW / 9.6 kVA and a charging capacity of up to 420 A.

Three-phase operation
Three units can be configured for three-phase output.

Unique features of the PowerAssist function
EasyPlus prevents overloading of a power-limited alternating current (AC) source. If the current source should be overloaded, the charging current of the battery will be automatically reduced in the first place. In the second row, the output power of the connected generator or local power supply is strengthened /e.g. current limited el. connections/ by the power taken from the battery.

Four stages of charging with an adaptive charger and two outputs for charging the battery
The main output provides powerful battery charging through the "adaptive charging" system. The software manages the three-stage automatic charging process to suit the battery condition and adds a fourth stage of trickle charging. In addition to this, EasyPlus can charge a second battery using an independent charging output intended for eg generator starter batteries.

The PC communication interface MK2-USB is used to set the parameters and to display the current status of the unit.

Technical specifications can be found in the downloadable documents below