Tipa

Injection cream AQUA BARIÉRA is a horizontal barrier in the form of a cream against the rising moisture of walls and hydrophobic impregnation of concrete, reinforced concrete and masonry. Thanks to the creamy consistency, the application of the barrier is easy and ready for immediate use.

injection cream
compensation for undercutting walls
excellent horizontal barrier
prevents the penetration of rising water

Use
brickwork, gas silicate elements, concrete, aerated concrete or reinforced concrete

Method
The cream is injected into the joints of masonry or mortar into drilled holes d=12 mm. These holes should be no more than 12 cm apart and end about 2-5 cm in front of the outside of the wall. The maximum wall width is 450 cm. Drilled holes are usually drilled above ground level or at floor level. The drilled hole is filled with cream. Depending on the porosity, the cream penetrates the surface after 30 minutes to several hours. It then creates an impenetrable barrier against rising moisture and water.

Hazard identification
Signal word: WARNING
H319 - Causes serious eye irritation.
H315 - Irritating to skin.
H412 - Harmful to aquatic organisms, with long-term effects.
P273 - Avoid release to the environment.
P280 - Wear protective gloves/protective clothing/safety glasses/face shield/hearing protection/...
P305/351/338 - IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if worn and if they can be removed easily. Continue rinsing.
P332/313 - In case of skin irritation: Get medical attention/treatment.
P337/313 - If eye irritation persists: Get medical attention/treatment.
P501 - Dispose of contents/container by taking to yard to hazardous waste section.
Composition: 1,2-benzisothiazol-3(2H)-one, Silane, triethoxyoctyl-, branched, Isotridecanol, ethoxylated, Siloxanes and silicones, 3-[(2-aminoethyl)amino]propyl Me, di-Me, terminated with a methoxy group

Technical parameters:

Packaging: 250g
Color: cream