Tipa

The Carspa MKS hybrid inverter is a combination of a solar MPPT controller, a battery charger and a full sine wave inverter with backup from the public power grid. It is an easy, compact and all-in-one solution for creating your own single-phase photovoltaic power plant for a household, cottage or caravan. Just connect the battery and appliances. At the same time, it can function as a backup UPS source in the event of a grid failure, and its output is purely off-grid, so no unwanted power export back into the grid can occur. Ultra-fast switching between battery and grid will not affect the running of appliances. It is equipped with a very comprehensive and backlit LCD display for monitoring and supervision. Several options for displayed data can be set. By default, the inverter operates in uninterruptible power supply mode, however, any grid/solar/battery priority can be set, as well as battery charging source priority.

- pure sine waveform, suitable for all appliances
- MPPT solar controller for maximum yield
- single-phase off-grid output without overflows (cannot be connected in parallel to grid)
- clear and adjustable LCD display
- optional work modes and priority of power sources
- adjustable operating parameters as needed
- integrated circuit breaker against short circuit / overload
- protection against overheating, overcharging and excessive discharge of the battery
- AGM and GEL batteries can be used, or LiFePO4 (only for experienced users)
- the battery can be automatically recharged from the grid if solar power is not available
- sound warning for faulty status and malfunction
- function of cold start and power-saving mode
- powerful active cooling


Technical parameters

Grid input voltage: 90-280 V AC
Frequency: 50 / 60 Hz (auto detection)
Output: 1 phase, 230 V AC +- 5%
Inverter power: 2400 W / 3000 VA
Peak power: 4800 W / 6000 VA for 5 sec.
Switching delay: 10-20 ms
Output wave: pure sine wave
Battery voltage: 24 V
Floating voltage: 27 V
Battery overvoltage: 31 V
Battery type: AGM, GEL, LiFePO4 (must be set correctly!)
Max. charging current from the grid: 30 A
Max. MPPT controller current: 40 A
Max. solar module power: 1000 W
Max. solar module voltage (Voc): 102 V DC
Operating voltage range of the MPPT controller: 30 – 80 V
Inverter power priority: solar / UPS / only battery with grid back-up
Charging priority: solar / grid / solar + grid / solar only
Self consumption: 2 W
Efficiency: 98%
Dimensions: 305 x 272 x 100 mm
Operating temperature: 0 to 55°C
Weight: 5.2 kg
Protection rating: IP20