Tipa

Adhesive for gray polystyrene THERMO GRAFIT is a one-component low-expansion polyurethane foam, specially developed for the requirement of gluing light insulation materials and decorative elements made of polystyrene. The resulting foam has an excellent structure even at +5 °C. Excellent adhesion to concrete, plaster, masonry, wood, polystyrene, non-softened PVC, including modified asphalt strips, etc.

low expansion
excellent sound 58 – 60 dB
good thermal insulation
application temperature +5 °C to +35 °C
quality structure
yield of up to 14 graphite plates
part of ETICS insulation systems
excellent adhesion to various building substrates – concrete, plaster, masonry, wood, polystyrene, non-softened PVC, including modified asphalt strips, etc.

Use
specially developed for gluing gray polystyrene (graphite boards)
for highly efficient gluing and mounting of insulation systems on vertical structures

Hazard identification

Signal word: DANGER

H222/229 - Extremely flammable aerosol. The container is under pressure: it may burst when heated.
H317 - May cause an allergic skin reaction.
H319 - Causes serious eye irritation.
H334 - May cause allergy or asthma symptoms or breathing difficulties if inhaled.
H315 - Irritating to skin.
H332 - Harmful by inhalation.
H335 - May cause respiratory irritation.
H351 - Suspected of causing cancer .
H362 - May harm an infant through breast milk.
H413 - May cause long-term harmful effects to aquatic life.
H373 - May cause damage to organs through prolonged or repeated exposure.

P102 - Keep out of the reach of children.
P201 - Obtain special instructions before use.
P210 - Keep away from heat, hot surfaces, sparks, open flames and other sources of ignition. No smoking.
P211 - Do not spray on open flames or other sources of ignition.
P251 - Do not puncture or burn even after use.
P261 - Avoid breathing dust/fume/gas/mist/vapours/aerosols.
P280 - Wear protective gloves/protective clothing/safety glasses/face shield/hearing protection/...
P410/412 - Protect from sunlight. Do not expose to temperatures exceeding 50°C.
P501 - Dispose of contents/container by taking to yard to hazardous waste section.

Composition: chloroalkanes, C14-17, dimethyl ether, reaction products of phosphoryl trichloride and 2-methyloxirane, diphenylmethane diisocyanate, isomers and homologues

Technical parameters:

Volume: 750ml
Packaging type: pistol can
Yellow color