Tipa

Set for simple installation of water heating in boilers and other devices.

The set consists of 6 monocrystalline panels JAM54S30 415/GR black frame JA SOLAR with a power of 415W each, a GETI GWH02D 4000W controller and a complete 25 meter long cabling with attached MC4 connectors.

Note: The GETI GWH inverter is only suitable for resistive loads with a bimetal thermostat (not suitable for electronically controlled thermostats!)
The inverter output (L, N) must not be connected to the mains or earth! The output of the inverter must not be connected to the TN-C system.

The system is simple, it only requires the connection of the appropriate number of photovoltaic panels with a maximum power of 4000 W with an operating voltage of 160 ~ 350V DC, a mains voltage of 230C AC and a connection with a resistive load, e.g. a heating coil, an electric boiler, an electric radiator or underfloor heating and fuses elements.

The direct current generated in the panels, which cannot be fed directly to the heating devices, is converted into alternating current in the inverter, which can be used to power the heating devices.

The maximum power of the system is 4000 W. The inverter has a priority input from the photovoltaic panels, and in the event of a lack of power on these panels, the system is backed up by power from the mains voltage of 230V AC.


- These are oversized items that are not eligible for free shipping. The delivery time from the creation of the order can be extended by 3-4 working days.


Product parameters:

- solar inverter for heating water using resistive load (heating coil, water heater)
- temperature sensor
- automatic switching between networks (PV / grid 230V AC)
- operating modes: PV only as an island system or PV + grid
- quiet operation ensured by passive cooling
- effective maximum power tracking on panels using MPPT
- high efficiency > 99%

The GETI GWH02D inverter is equipped with a clear LED display that informs the user about current and set values:

- indication of water heating from PV panels
- indication of water heating from the 230V AC grid
- water temperature (PV, AC) current and set
- PV power
- PV voltage
- operation indication
- error status indication


Technical parameters:

- input voltage (VDC): 160 to 350 (VDC)
- input voltage (VAC): 230 V AC
- output voltage [VAC]: 0-260 V AC (VAC)
- maximum power: 4000 W
- PV input current: 20A max.
- AC output current: 20A max.
- load type: resistive with bimetal thermostat (not suitable for electronically controlled thermostats!)
- the value of the resistive load must not be lower than 13 Ohm
- MPPT function: YES
- connection of PV panels: Series or series-parallel
- priority input: PV panels
- backup input: mains 230V AC
- working temperature: -25 °C ~ + 55 °C
- efficiency: > 99%
- temperature sensor length: 3m
- cooling: passive
- protection against short circuit at the input
- protection against overheating
- cooling: passive
- input connection of PV panels: MC4 connectors
- input connection 230V AC: screw terminal
- 230V AC output connection: screw terminal
- material: Aluminum
- degree of protection: IP65
- dimensions L x W x H [mm]: 255 x 201 x 95 mm
- weight: 3 kg


Photovoltaic panel JAM54S30 415/GR black frame JA SOLAR

Technical parameters:

Nominal power: 415 W
Type: monocrystalline
Module efficiency: 21.3%
Maximum current (Imp): 13.13 A
Maximum power voltage (Vmp): 31.61 V
Open-circuit voltage (Voc): 37.45 V
Short-circuit current (ISC): 14.02 A
Maximum system voltage: 1500VDC (IEC)
Output tolerance: 0~+3%
Connector type: MC4 compatible
Protection class: IP68
Module dimensions: 1722 × 1134 ×30 mm
Number of cells: 108 (6x18)
Dimensions: 1754×1096×30 mm
Weight: 19.5 kg
Frame: anodized aluminum alloy type 6005-2T6
Frame color: black



WARNING! The system is intended only for resistive loads.

The set includes:
5 monocrystalline PV panels JAM54S30 415/GR black frame JA SOLAR
GETI GWH02D solar controller
Cable set 25 meters
MC4 connectors
installation instructions