Tipa

Function / Arbitrary Waveform Generator The UTG4082A is an advanced two-channel generator using direct digital synthesis technology to produce an accurate and stable output of arbitrary waveforms with a resolution of 1μHz, a maximum output frequency of 80MHz, a sampling rate of 500MS/s. Output signals are sine, square, sawtooth, harmonic, pulse, Gaussian, DC, arbitrary.
Multiple AM, FM, ASK, FSK, PSK modulation and signal modulation with modulations such as PWM, BPSK, QPSK, OSK, DSB-AM, SUM, QAM, Frequency sweep etc. from internal or external source, linear and logarithmic sweep are available.
Use of the generator is envisaged in the design, development, testing, troubleshooting and repair of electronic and electroacoustic equipment, such as testing circuits and equipment in cellular and wireless systems, radio and television systems; testing semiconductor components, etc. Thanks to DDS technology, it is able to generate signals that are accurate and clean, with minimal distortion.
A user-friendly panel with simple controls and a clear display allows you to work much more efficiently and quickly. It has a USB interface and powerful software for transferring data to a computer.
More than 160 waveforms of e.g. mathematical, bioelectrical, medical, trigonometric, antitrigonometric, transient phenomena in automobiles, etc. are stored in the 7GB internal non-volatile memory. In this memory, you can store up to 32Mpts long wave of any waveform. A frequency meter (counter) of external TTL signals up to 800MHz is also built-in.
It has an excellent price/performance ratio and a number of functions. It can be used in university laboratories, research institutes, etc. This device meets the safety requirements of IEC61010-1, up to the CATⅡ 300V insulation and overvoltage standard.


Product parameters :

- two-channel generator - 2 equivalent, independent channels
- the possibility of connecting both channels
- DDS digital signal synthesis
- generation of sine signals with a frequency of 1μHz to 80MHz
- generation of rectangular signals with a frequency of 1μHz to 30MHz
- generation of various other waveforms (sine, square, ramp, triangle, pulse, noise, DC, any)
- generation of up to 16 harmonic signals with a choice of even, odd, amplitude, phase compared to the basic signal
- modulation types AM, FM, PM, ASK, FSK, PSK, PWM, BPSK, QPSK, OSK, DSB-AM, SUM, QAM, Sweep
- use of a modulation signal from an internal or external source
- support for the output of sweep and burst signals
- supports internal / external / manual trigger triggering
- 7-bit high-precision frequency measurement of external TTL compatible signals up to 800MHz
- output signal amplitude up to 10Vpp at 50Ω impedance or up to 20Vpp in high impedance mode
- protection of terminals against overvoltage
- sampling frequency 500MS/s and 16-bit vertical resolution, including symbols
- possibility to store up to 16 groups of variable digital waves
- USB interface on the front panel for entering waveforms
- USB Host interface on the back panel, powerful PC software
- LAN connector on the back panel for firmware update and remote control
- multifunction knob and numeric keypad for easy operation
- system help
- TFT LCD color display with 8" diagonal and WVGA resolution (800 x 480 pixels)


Technical parameters :

- output channels: 2
- sampling frequency: 500 MS/s (DDS mode)
- output frequency: up to 80MHz
- frequency resolution: 1μHz
- vertical resolution: 16 bits (including symbols, inscriptions)
- wavelength of any shape: 8pts to 32Mpts
- non-volatile memory: up to 160 groups of arbitrary curves can be stored
- types and frequencies of generated signals:
sinusoidal: from 1μHz to 80MHz
rectangular: from 1μHz to 30MHz
ramp (saw): from 1μHz to 2MHz
pulse: from 1μHz to 30MHz
any: from 1μHz to 20MHz
Gaussian noise: up to 80MHz (-3dB)
- DC signal offset (peak AC+DC): ± 5V (50 Ω), ± 10V (high resistance)
- minimum rise/fall time of any signal: typically < 7ns
- amplitude range: 1mVpp to 10Vpp(50Ω), 2mVpp to 20Vpp(High Z)
- modulation types: AM, FM, PM, ASK, FSK, PSK, PWM, BPSK, QPSK, OSK, DSB-AM, SUM, QAM, Sweep
- working modes: output on / off, continuous, modulation, sweeping, series
- frequency measurement of signals compatible with TTL: yes, in the range of 100mHz - 800MHz with an accuracy of ±51 ppm, resolution 7 digits/s
- output impedance: adjustable from 1Ω to 1kΩ, or High Z, factory setting 50Ω
- output short circuit protection: yes
- protection of terminals against overvoltage: at input voltage >±12.0V, frequency <10kHz, amplitude >100mVpp
- protection of terminals against overvoltage: at input voltage >±2.0V, frequency <10kHz, amplitude ≤100mVpp
- total harmony. distortion DC to 20kHz, 1Vpp (typical value): <0.2%
- accuracy: up to 90 days ± 50ppm; up to 1 year 100ppm (at a temperature of 18°C to 28°C)
- temperature coefficient: < 2 ppm /℃
- display: TFT LCD 64K, with a diagonal of 8", WVGA (800 x 480 pixels)
- ports (interfaces): USB Device, USB Host, LAN, 10 MHz Input, 10 MHz Output, frequency counter, FSK Trig, Modulation in
- power supply: AC from 100 V to 240 V, 45 Hz to 440 Hz, CAT II 300 V
- consumption: <50W
- protection: fuse 250 V, T2 A
- cooling method: forced fan cooling
- degree of protection against the external environment: IP2X
- ambient operating temperature: +10°C to +40°C
- ambient operating humidity: below +35℃ ：≤90％RH; +35℃ to +40℃：≤60％RH
- non-operational (storage) ambient temperature: -20℃～ +60℃
- operating altitude: up to 3,000 m above sea level
- non-operational (storage) altitude: up to 15,000 m above sea level
- weight without packaging (Net): 3.5 kg
- total weight: approx. 4.5 kg
- dimensions (width x height x depth): 336 x 164 x 108mm
- product color: white and gray


Contents of individual packaging :

- function generator UTG4082A: 1 pc
- power cable: 1 pc
- USB interface cable (UT-D14): 1 pc
- BNC-BNC cable (1m): 2 pcs
- user manual: 1 pc


Packaging for bulk customers :

- standard quantity per carton: 1 pc
- standard carton dimensions: 405 x 225 x 265 mm
- gross weight of the carton: approx. 4.8 kg


MANUFACTURER: UNI-TREND
www.uni-t.cz

You can download software (firmware) for connecting generators of the UTG4000 series with a PC from the manufacturer's website:
https://instruments.uni-trend.com/EU-EN/waveformgenerators/utg4000a.html