Tipa

Construction foam with high quality structure and innovative patented applicator ensuring high quality.

The unique patented applicator makes it possible to achieve the quality of gun foam even without using a gun.
Uniform structure and low post-expansion.
Adjusting the dosing speed using the applicator is easy and convenient.

Use
It is used to install doors and windows, to insulate and fix pipes, to fill holes and gaps, and to provide sound and thermal insulation.

Application procedure
Temperature during use -5°C and +30°C, best results at +20°C.
Can temperature during application: +10°C to +25°C, best results at +20°C.
The surfaces must be clean of dust, loose particles and bridging. The hardened foam can be painted with water-based paints.

Method of use
APPLICATION USING THE EASYGUN APPLICATOR
Hold the can of foam in an upright position.
Place the EasyGun applicator on the valve of the can, press gently until the applicator locks into place, then shake the can well at least 20 times.
To apply, turn the can adapter upside down and press the EasyGun applicator with your fingers.
APPLICATION WITH FOAM GUN
Holding the foam can upright, rotate the gun by holding the gun handle with one hand and rotating the can with the other hand. Make sure you are not aiming at other people when rotating the pistols.
The can must not be screwed to the gun by turning the valve upside down or turning the gun on the can.
After attaching the gun, shake the can at least 20 times. Foam output can be adjusted using the gun trigger.

Cleaning
Uncured foam can be cleaned from tools and surfaces using PENOSIL Premium cleaner.
Once the hardened foam has softened, it can be mechanically removed using PENOSIL Premium foam remover.
Hands, clothing and the foam gun can be cleaned of uncured foam with moistened PENOSIL Premium cleaning wipes.

Technical parameters:

- Free time: 12-16 min.
- Cutting time: 30-40 min.
- Density: 25-30 kg/m3
- Temperature resistance of hardened foam: -50 to + 90 °C

Security requirements
The product is flammable. Protect from overheating and protect from sources of ignition. Avoid direct sunlight and do not smoke while working. May cause sensitization by inhalation and skin contact. Ensure adequate ventilation during application. Use safety glasses and gloves. Keep out of reach of children. The cured foam can be handled without risk to health. Detailed safety information is available in the safety data sheet.