Tipa

Digital thermostat W3230, -50 to 120°C, 24VDC power supply. A simple thermostat that displays the set and current temperature. The compact case for the panel contains buttons near the display. 1m cable with probe.


Technical parameters:

- temperature measurement range: –55°C to 120°C
- measurement step: 0.2°C
- accuracy: 0.2°C
- adjustable hysteresis: 0.1%~30%
- temperature calibration: –10° to +10°
- refresh rate: 0.5s
- supply voltage: DC12V/60mA
- relay contact: 15VDC/15A – resistive load, 3A – inductive load
- measuring element: NTC (10K 0.5%), length 100cm, waterproof thermistor case
- the thermostat can be operated in both cooling and heating mode.
- dimensions: 78×42×25mm, required hole in the panel: 40×72mm

Instructions for use:
A short press of the RESTART button turns the thermostat on, a long press turns it off. By briefly pressing the SET button after the display flashes, you can set the desired temperature with the up and down arrows. By long pressing the SET button and then using the arrows, other functions of the thermostat can be set:

P0: heating mode (H) or cooling mode ©
P1: hysteresis setting 0.1 to 30°C
P2: setting the upper maximum temperature limit
P3: setting the lower maximum temperature limit
P4: temperature correction compared to the temperature sensor -10 to 10°C
P5: time delay 0 to 10 minutes
P6: Signaling when the maximum temperature has been reached -50 to 120°C (factory disabled)
P7: Keypad lock
P8: Factory reset

- the product is not an independently functional unit, it requires professional assembly.