Tipa

The UT-C506A is an AC current meter with high reliability and safety, which serves as a supporting device for measuring current with a multimeter. It fits most UNI-T multimeters and features a small and convenient design that is an ideal tool for extending the current ranges of multimeters. Clamps are used in conjunction with a mutimeter, it measures the current with a sensor and converts the measured current into a voltage, then transmits the voltage to the multimeter with a cable, which displays the corresponding values on the multimeter. The UT-CS06A has the ability to measure alternating current up to 400 A. The reliable measurement accuracy and unique exterior design make it a practical tool.


Product parameters:


- compact design, easy to use
- low weight enabling one-handed work in the air
- can be used to measure multiple types of cables, it can measure cables with a maximum diameter of 28 mm
- use together with a multimeter allows you to get accurate readings without breaking the circuit
- ability to measure alternating current up to 400 A, frequency response 50Hz-400Hz
- achieving fast reading at 1mV/A output
- measurement category: CAT II 600V, CAT II 300V


Technical parameters:

- current measurement: 1- 400 A AC
- resolution: 0.1A
- frequency AC A: 50 Hz to 400 Hz
- output ratio: 1mV/A
- accuracy ± (2.5% +0.5A), 50 - 60Hz ±(2.8% +0.5A), 60-400Hz
- resistance to falling: 1 m
- suitable for most UNI-T multimeters
- maximum jaw opening: 28 mm
- cable length: 1.1m
- operating temperature: 0-40 °C (32-104 °F)
- storage temperature: -10-50 °C (14-122 °F)
- dimension: 158 x 65 x 33 mm
- accuracy depends on the multimeter
- the actual RMS value depends on the multimeter
- response time Depends on the multimeter
- power supply: no battery required
- weight: 215.3 g