Tipa

The GETI Emergency Power Supply (EPS) system with pure sine wave output is a device that provides an AC voltage source in the event of a power outage. The emergency power supply can be used as a backup power source for various pumps, automatic boilers, feeders, emergency lighting, camera systems, and more. In normal mode, the connected device is powered directly from the grid, and in case of a power failure, the emergency power supply automatically switches to inverter mode. The connected device is then powered by the attached battery. If the power supply is not restored, the emergency power system may shut down when the voltage of the connected battery drops to around 10.2V ± 0.3V. This is to protect the battery from deep discharge and subsequent damage. The EPS is equipped with a clear color display, a pure sine wave inverter based on a toroidal transformer, and a fast 32-bit processor.

Warning: The contacts of the connected battery must be properly protected against accidental contact by persons, foreign objects, contact with other parts of the system, or short circuits.


Product description:

- inverter, UPS, AVR and charger in one device
- clear LED colour display
- high efficiency due to construction with toroidal transformer
- high charging current
- protection against overload, short circuit, overcharging and reverse polarity.



Technical parameters:

- type of backup batteries: AGM, GEL
- backup battery voltage: 12V DC
- rated capacity: 1000VA
- rated power: 700W
- transformer: toroid
- input voltage: 230 V AC - 50Hz
- output voltage: 220V AC ± 3% - 50Hz / pure sine wave
- charging current: 10A/ 20A optional
- charging voltage: 13.8V ± 0.3V
- low battery voltage limit: 10.9V ± 0.3V
- battery low voltage protection point: 10.2V ± 0.3V
- transfer time: < 4 ms
- cooling system: Yes
- operating temperature: 0 ~ 40°C
- relative humidity: 10% ~ 90%
- storage temperature: -15°~ 45°C
- dimension: 311 x 232 x 140 mm
- weight: 6,5kg


Packaging: box 1pc / carton 1pc
Carton weight: 7,5kg