Tipa

The GETI emergency power supply system (EPS - Emergency Power Supply) is a device that provides a source of alternating voltage in the event of a power failure. You can use the Power Supply System (EPS) as a backup source for various pumps, automatic boilers, feeders, emergency lighting, camera systems and more. In normal mode, the connected device is powered directly from the network, and in the event of a failure, the emergency power system automatically switches to inverter mode. The connected device is then powered by the connected battery. If the power supply is not restored, the system (EPS) may switch off when the voltage of the connected battery drops to a value of around 10.2V ± 0.3V. This is to protect the battery from deep discharge and subsequent damage. The EPS is equipped with a clear colour display, a pure sine voltage converter based on a toroidal transformer and a fast 32-bit processor.

Warning: The contacts of the connected battery must be properly protected against accidental contact by persons, foreign objects, contact with other parts of the system, or short circuits.


Product description:

- inverter, UPS, AVR and charger in one device
- clear LED colour display
- high efficiency due to construction with toroidal transformer
- high charging current
- protection against overload, short circuit, overcharging and reverse polarity.



Technical parameters:

- type of backup batteries: AGM, GEL
- backup battery voltage: 12V DC
- rated capacity: 1000VA
- rated power: 700W
- transformer: toroid
- input voltage: 230 V AC - 50Hz
- output voltage: 220V AC ± 3% - 50Hz / pure sine wave
- charging current: 10A/ 20A optional
- charging voltage: 13.8V ± 0.3V
- low battery voltage limit: 10.9V ± 0.3V
- battery low voltage protection point: 10.2V ± 0.3V
- transfer time: < 4 ms
- cooling system: Yes
- operating temperature: 0 ~ 40°C
- relative humidity: 10% ~ 90%
- storage temperature: -15°~ 45°C
- dimension: 311 x 232 x 140 mm
- weight: 6,5kg


Packaging: box 1pc / carton 2pc
Carton weight: 8 kg


The gel type Geti lead-acid battery is especially suitable for solar and wind energy systems and caravans, but also as a replacement for batteries for UPS backup systems, backup power supplies, burglar alarm applications, EPS, telecommunications, mobile warning and signaling devices, etc. It is a maintenance-free, hermetically sealed battery, which allows any working position.


Technical parameters:

- production technology: VRLA - valve regulated lead acid
- type: GEL
- voltage: 12 V
- capacity: 120 Ah
- dimensions: 407 x 177 x 222 mm
- overall height (with terminals): 225 mm
- weight: approx. 35 kg
- internal resistance (fully charged battery): 4 mΩ
- self-discharge process <3%, 25 ° C

Packaging: 1 pc of backup source GETI GEP501 + lead battery 100AH
weight: 42kg