Due to the amendment of the VAT legislation under the EU Directive, all foreign sales to end/ retail customers are currently suspended. B2B transactions remain unchanged.
The GETI emergency power supply system (EPS - Emergency Power Supply) is a device that provides a source of alternating voltage in the event of a power failure. You can use the Power Supply System (EPS) as a backup source for various pumps, automatic boilers, feeders, emergency lighting, camera systems and more. In normal mode, the connected device is powered directly from the network, and in the event of a failure, the emergency power system automatically switches to inverter mode. The connected device is then powered by the connected battery. If the power supply is not restored, the system (EPS) may switch off when the voltage of the connected battery drops to a value of around 10.2V ± 0.3V. This is to protect the battery from deep discharge and subsequent damage. The EPS is equipped with a clear colour display, a pure sine voltage converter based on a toroidal transformer and a fast 32-bit processor.
Warning: the contacts of the connected battery must be properly protected against: contact with persons, foreign bodies, contact with other parts of the system or short circuits.
Product description:
- inverter, UPS, AVR and charger in one device - clear LED colour display - high efficiency due to construction with toroidal transformer - high charging current - protection against overload, short circuit, overcharging and reverse polarity.
Technical parameters:
- type of backup batteries: AGM, GEL - backup battery voltage: 12V DC - rated capacity: 800VA - rated power: 500W - transformer: toroid - input voltage: 230 V AC - 50Hz - output voltage: 220V AC ± 3% - 50Hz / pure sine wave - charging current: 10A/ 15A/ 20A optional - charging voltage: 13.6V ± 0.3V - low battery voltage limit: 10.9V ± 0.3V - battery low voltage protection point: 10.2V ± 0.3V - transfer time: < 4 ms - cooling system: Yes - operating temperature: 0 ~ 40°C - relative humidity: 10% ~ 90% - storage temperature: -15°~ 45°C - cable length to battery: 2 x 75 cm, M8 - dimension: 253 x 241 x 102 mm - weight: 4,5 kg
The GETI AGM lead-acid traction battery offers high performance for driving wheelchairs, electric bicycles, electric scooters, electric scooters and other mobile machines. It is also suitable for solar and wind energy systems, for UPS, EPS systems, security technology, etc. It is a maintenance-free, hermetically sealed accumulator, which enables any working position.
Technical parameters:
- production technology: VRLA (valve regulated lead acid) - valve-controlled lead acid batteries - type: GEL - voltage: 12 V - capacity: 55 Ah (25°C) - number of cycles: ≥600 Cycles @25℃ ( DoD 80% ) - number of cycles: ≥850 Cycles @25℃ ( DoD 50% ) - discharge current recommended: 12A - charging current for standby mode: 13,75A max. (0.25C) - charging current for cyclic mode: 13,75A max. (0.25C) - charging voltage for standby mode: 2.25 - 2.30 V / cell at 25°C - charging voltage for cyclic mode: 2.40 - 2.45 V / cell at 25°C - charging method: CV - self-discharge level: less than 3% / month at 25°C - internal resistance (fully charged battery): mΩ - connection terminals: M6 - charging temperature: -20℃~50℃ - discharge temperature: -40℃~60℃ - storage temperature: -20℃~60℃ - dimensions: 223 x 136 x 172 mm - total height (with end caps): 177 mm - weight: approx. 15.0 kg
Cash on delivery 
cash 
Online 
bank transfer 
Nobody has entered comment on this product yet. Be first!