Tipa

NANOPROTECH Electric sprays protect all electrical systems from oxidation, humidity, short circuit and leakage current. Thanks to the advances in nanotechnology, they can significantly extend the life of the equipment to save the costs of maintenance, service and repairs. Additionally, moisture can displace water-damaged appliances, re-establish their function, and protect them from further corrosion.

How Nanoprotech Electric sprays work?

Our sprays contain nanoparticles, which after application are captured on the metal surface and create an impenetrable insulating barrier. It displaces moisture and prevents oxidation. In addition, it insulates the conductors and thus prevents the electrical current from flowing into the surrounding humid environment to prevent a short circuit. Nanoparticles can penetrate an already existing layer of corrosion, capturing them directly on the metallic surface and making it easier to remove. It is suitable for all metal surfaces and for low and high voltage contacts. In addition, the bulk version of 300 ml with the official name GNP Electric Professional brings not only a double volume but also a professional applicator with a short and long application tube for a more practical application.

- Protects against shorting

Electrical components treated with NANOPROTECH Electric will be insulated with a thin layer of nanoparticles, which will perfectly protect them from moisture. If water gets treated, there is no short circuit and destruction. In addition, it will be protected from further oxidation and will greatly increase work safety, especially in a damp environment. This will prevent serious electric shocks.

- Protects against oxidation

Moisturization occurs in electrical apparatus for oxidation, which gradually degrades the device. However, NANOPROTECH Electric will prevent this. It can even be applied to an already corroding surface and thus effectively eliminated oxidation. It is therefore ideal for the treatment and restoration of the function of electrical devices that have reached the limit of life due to humidity and corrosion.

- First aid for drowned electronics

When water gets into the electrical device it leads to its rapid destruction. If the untreated plant is fatally damaged by water, NANOPROTECH Electric can restore its function. If you encounter a similar situation, dismantle and treat NANOPROTECH Electric as soon as possible. Nanoparticles dispense moisture within 15 minutes and preserve the surface. Thanks to this, your electronics will continue to work as before, and will remain protected from oxidation.

- Restores contacts_mObjects contacts

Older electronics often break contacts, most often due to their oxidation or the presence of moisture. If you encounter a similar problem, treat broken contacts with NANOPROTECH Electric spray. Nanoparticles help to clean and break oxidized contacts, thus extending the life of the instruments.

- Protects even in aggressive environments

All electrical devices are particularly at risk in a chemically aggressive environment. This is especially true when you come in contact with salt moisture, such as in seaside areas or in the winter months. Chlorine water or acid rain also cause problems. If your devices are exposed to corrosion, disassemble them and treat them from the inside. By doing so, you can preserve them and even under tough conditions the electrical connections will not lose their function.

Properties:

- It acts as anticorrosive and insulating protection
- Resistant to temperatures from -80 ° C to +160 ° C
- It works for up to 1 year
- Consumption: approx. 50 ml per 1 m2
- Content: 150 ml

Where to use spray?

- RC models (controllers, regulators, servos, connectors)
- Outdoor and indoor sockets
- Outdoor and indoor lighting
- Security systems, sensors and sensors
- Garden, workshop and construction technology
- Low and high voltage wiring
- Alternators, generators, timing and fuse boxes
- Batteries and their contacts
- Connectors and contacts of all kinds

How to use spray?

- Apply spray in well-ventilated areas and preferably with protective gloves.
- Carefully shake before spraying
- Spray a continuous layer (20-30 cm apart) on the designated surface or use the spray directly on the treated site
- Wait 10-15 minutes after application and then wipe the excess solution