Tipa

The Domino Antenna Profiler 82201 from Emme Esse is a programmable terrestrial amplifier with adjustable filters. The amplifier has five inputs: FM + 4x VHF-UHF. The amplifier itself detects the highest TV channel connected to the input and accordingly includes an input filter of the upper hold type to reduce interference in the 5G, 4G (LTE) band or the filter is switched off when receiving TV channels above 790 MHz. The amplifier automatically reads and displays the signal level of the selected TV channel, which means that you do not need a meter to adjust. The amplifier allows the frequency conversion of any input TV channel in the VHF and UHF bands to any other TV channel in the VHF and UHF bands, which is advantageous for various hotels and boarding houses where large high frequency distributions have a large attenuation. In individual TV channels (or clusters), the signal level is automatically regulated in real time (up to 20 seconds) using AGC, so that the levels at the amplifier output are constant. The amplifier allows you to process more than 50TV channels. If we require frequency conversion, there can be only one TV channel in the cluster. At the output of the amplifier, it is possible to include a tilt of 9 dB (compared to the reference frequency of 174MHz) to compensate for the attenuation of a large television distribution at high frequencies. It is possible to connect preamplifiers to the amplifier inputs, then it is necessary to turn on the +12 or + 24V preamplifier power supply in the Menu. The settings of the entire amplifier module can be locked with a password against unauthorized changes, and it is also possible to save the settings on the SD card and reload these parameters from the SD card when setting another module.


Product parameters :

- simple, intuitive configuration
- 5 inputs: 1 x FM + 4 x VHF / UHF
- 1 main output, 1 test output -30dB
- can process and transmit more than 50 TV channels (multiplexes)
- possibility of remote power supply of external preamplifiers
- built-in internal preamplifiers
- 32 programmable filters with adjustable width for 1 to 6 multiplexes
- frequency conversion of VHF and UHF channel to any other in VHF and UHF bands
- real-time AGC control (up to 20 sec) in individual TV channels or clusters
- the sharpest filters on the market (50 dB on adjacent channels)
- shows the level of individual TV channels - no measuring device is needed
- automatically shiftable filters 5G, LTE on all inputs
- possibility to include inclination 0 to 9dB on the output
- possible replacement of the power supply without dismantling the module
- lock module settings with a password
- possibility to save and later load the configuration to the SD memory card


Technical parameters :

- inputs : 4 VHF / UHF + 1FM
- outputs : 1 main (FM + VHF + UHF) + 1 test -30dB
- frequency range : FM 88 to 108 MHz, VHF 174 to 240 MHz, UHF 470 to 862 MHz
- protection against mobile internet interference : off, LTE, 5G
- FM input level range : 37 to 77dBμV
- VHF input level range : 40 to 109dBμV
- UHF input level range : 40 to 109dBμV
- max. FM signal output level (60dB/IM3) : 113dBμV
- max. VHF/UHF signal output level (60dB/IM3) : 120dBμV
- max. output level of VHF/UHF signal for one multiplex : 113dBμV
- max. output level of VHF/UHF signal for 6 multiplexes : 110dBμV
- max. FM gain : 35dB
- max. VHF gain : > 45dB
- max. UHF gain : > 55dB
- FM gain control : 20dB
- VHF/UHF gain control : automatic channel AGC
- regulation common at the output : 20dB
- tilt setting : off, on 9dB compared to 174MHz
- selectivity : 35dB/1MHz
- MER output quality in the VHF/UHF band : 35dB/35dB
- ESD protection : yes, all inputs
- voltage setting for preamplifiers : off, + 12V, + 24V (total 100mA for all inputs)
- SD card input : yes, possibility to format, write and load module settings
- working temperature : -5°C to +50°C
- supply voltage : 100 to 240V/AC
- power consumption : 16VA
- dimensions : 217 x 165 x 59mm
- weight : 0.8kg


Manufacturer : Emme Esse
www.emmeesse.it