{"product_id":"multimetr-uni-t-ut622e","title":"UNI-T UT622E LRC multimeter","description":"We provide a 3-year warranty on this product.\u003cbr\/\u003e\u003cbr\/\u003eThe UT622E LRC is a handheld component tester for measuring inductors (inductance), resistors (resistance) and capacitors (capacitance), as well as the overall impedance Z and DC resistance DCR, and their secondary characteristics: D (dissipation factor), Q (quality factor), ? (phase angle in degrees), ? (phase angle in radians) and ESR (equivalent series or parallel resistance). Component parameters are measured using an alternating voltage with a selectable frequency of 100 Hz, 120 Hz, 1 kHz, 10 kHz, 100 kHz and a selectable amplitude of 0.1 Vrms, 0.3 Vrms, 1.0 Vrms at a signal source output impedance of 100 ?. Unlike the UT622A, the UT622E also offers the option of measuring with a DC voltage of 1.0 V.  The highest measurement accuracy is 0.1 per cent. \u003cbr\/\u003eThe instrument features an intuitive 2.8-inch TFT LCD display with ten-step adjustable backlight brightness, a built-in high-capacity 1800 mAh Li-Pol battery and a mini-USB connector for charging and data transfer to a PC. The maximum display value when measuring primary parameters is 99,999 and the minimum value when measuring secondary parameters is 0.0001. Measurement mode – single measurement triggered by the TRI button or a command from a PC; or continuous measurement with an adjustable test rate of 20x\/sec, 5x\/sec or 2x\/sec. Terminal configuration: 4+1n (UTR-L100k-H) or 2+1 (upon purchase of UTR-002 test leads with alligator clips).\u003cbr\/\u003eThanks to its technological sophistication, the device is also suitable for professional use – when connected to a computer (PC), it creates a workstation for sorting components according to specified parameter tolerances and can be used on production lines, in laboratories, etc.\u003cbr\/\u003e\u003cbr\/\u003e\u003cbr\/\u003eProduct specifications:\n\n- Handheld RLC metre for measuring primary and secondary component parameters\n- Large, backlit, intuitive TFT LCD display with 10 brightness levels\n- Display range up to 99,999\u003cbr\/\u003e- maximum accuracy of 0.1 per cent\n- option to select components according to specified tolerances\n- AC voltage measurement at 100 Hz, 120 Hz, 1 kHz, 10 kHz, 100 kHz\u003cbr\/\u003e- Selectable AC voltage amplitude: 0.1 Vrms, 0.3 Vrms, 1.0 V rms\n- DCR measurement using 1.0 V DC\u003cbr\/\u003e- selection of equivalent mode (series mode for Z \u003c 100 ?, parallel mode for Z \u003e 10 k?)\n- automatic component identification \n- built-in high-capacity Li-Pol battery:     1800 mAh\u003cbr\/\u003e- Power supply and charging: DC 5 V ±0.25 V, \u003e1 A adapter\n- Operating time on a single battery charge: typically 8 hours\n- Functions in data logging and statistics mode: \t\tAVG, MAX, MIN   \n- Audible beep when buttons are pressed: yes, can be switched on\/off\n- Button lock function: yes\u003cbr\/\u003e- Auto-off: yes, after 5, 15, 30 or 60 minutes, or disabled\n- Data interface: mini USB\n- Data transfer rate to PC: \t\t\t9,600\/19,200\/38,400 baud\n- Audible and visual alarm for tolerance comparison:   off, pass, fail \n- Audible alarm selection: \t\t\t\tshort beep, long beep, two short beeps\n- Tester reset on open or short-circuited circuit:   yes\n- Tolerance setting relative to nominal value:     1% to 20%, default 5%\u003cbr\/\u003e- Component count: all, pass, fail\n\n\nTechnical specifications:\n\n- Measurement range for primary impedance parameters: \u003cbr\/\u003e\t\ttype \/\/     display range \/\/ minimum resolution within range\n   inductance L \/\/ 0.001 µH to 9999.9 H    \/\/ 1 \/ 0.1 \/ 0.01 \/ 0.001 µH\u003cbr\/\u003e\t     capacitance C \/\/ 0.001 pF to 99.999 mF   \/\/ 1 \/ 0.1 \/ 0.01 \/ 0.001 pF\u003cbr\/\u003e\t         Resistance R \/\/ 0.0001 ? to 99.999 M? \/\/ 0.0001 ?\n Total impedance Z \/\/ 0.0001 ? to 99.999 M? \/\/ 0.0001 ?\u003cbr\/\u003eDC resistance DCR \/\/ 0.1 m? to 999.99 k? \/\/ 0.1 m?\n\n- Measurement range for secondary impedance parameters: \u003cbr\/\u003e\t\t           type \/\/ display range \/\/ minimum resolution within range\ndissipation factor D \/\/  0.0001 to 9.9999 \/\/ 0.0001\u003cbr\/\u003e                           Quality factor Q \/\/  0.0001 to 99,999  \/\/ 0.0001\nPhase angle in degrees ? deg \/\/ -179.9° to 179.99° \/\/ 0.01°\u003cbr\/\u003ephase angle in radians ? rad  \/\/ -3.142 rad to 3.1416 rad \/\/ 0.001 rad\u003cbr\/\u003e             Equivalent resistance (ESR) \/\/   0.01 m? to 999.99 ?    \/\/ 0.01 m?\u003cbr\/\u003e\u003cbr\/\u003e\u003cbr\/\u003e- display: backlit 2.8\" TFT LCD display\n- display range: up to 99999 \u003cbr\/\u003e- Accuracy: best 0.1%\n- Component selection according to set tolerance:   yes\n- Measurement in DCR mode: DC voltage 1.0 V\n- AC voltage measurement: \t\t\tAC  100 Hz, 120 Hz, 1 kHz, 10 kHz, 100 kHz\n- Measurement voltage amplitude: \t\t\t0.1 Vrms, 0.3 Vrms, 1.0 Vrms\n- Data transfer to PC: yes, after installing the software on the PC\n- Power supply: \t\t\t\t1800 mAh Li-Pol rechargeable battery and\/or DC 5 V ±0.25 V, \u003e1 A adapter\n- automatic charging management: \t\t\teven when the device is switched off\n- Charging and data interface: mini USB\n- Operating environment: temperature 5 to 35°C, humidity ?80%\n- Weight without batteries: \t\t\t305g\n- Product dimensions (H x W x D): 190 x 90 x 44 mm\n- Packaging dimensions: 225 x 220 x 63 mm \t\t\t\t\u003cbr\/\u003e- Safety and EMC certifications:     IEC\/EN61010-1: 2010, EN61326-2: 2013, EN61326-2-2: 2013\u003cbr\/\u003e\u003cbr\/\u003e\u003cbr\/\u003eContents of individual package:\n\n- UT622E unit: 1 pc\n- USB interface cable: 1 pc\n- UTR-L100k-H four-pole test leads:     1 pc\u003cbr\/\u003e- UTR-001 gold-plated short-circuit board: 1 pc\n- User manual: 1 pc\n\n\nMANUFACTURER: UNI-TREND\nwww.uni-t.cz","brand":"UNI-T","offers":[{"title":"Default Title","offer_id":52555613602130,"sku":"07720291","price":129930.19,"currency_code":"HUF","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0954\/9624\/1490\/files\/07720291_e2340d77-5d87-4a79-9c01-e161e9740ce7.png?v=1793976009","url":"https:\/\/tipa.eu\/en-hu\/products\/multimeter-unit-ut622e-1","provider":"TIPA","version":"1.0","type":"link"}