{"title":"Solar inverters","description":"Voltage inverters, often referred to as inverters, are the \u003ca href=\"http:\/\/www.tipa.eu\/cz\/solarni-sestavy\/c-2897\/\"\u003eheart of any photovoltaic system\u003c\/a\u003e They convert the DC voltage from solar panels into AC voltage that can be used in a typical household or fed into the utility grid. Explore our range and find the ideal solution for your photovoltaic system.","products":[{"product_id":"menic-napeti-victron-energy-1200va-12v-ve-direct","title":"Voltage converter Victron Energy 1200VA 12V VE.Direct","description":"The drive features a rugged toroidal transformer that has proven its reliability in Victron Energy drives for many years.\u003cbr\/\u003eThe inverters are short - circuit proof and protected against overheating, whether due to overload or overload\u003cbr\/\u003ehigh ambient temperatures.\u003cbr\/\u003e \u003cbr\/\u003eThis inverter is fully configurable - it is a completely unique function, where you can set the following parameters using a PC:\u003cbr\/\u003e• Low and high battery alarm and reset level\u003cbr\/\u003e• Inverter shutdown level at low and high battery voltage and reset level\u003cbr\/\u003e• Output voltage 220\/230 \/ 240V\u003cbr\/\u003e• Frequency 50 Hz or 60 Hz\u003cbr\/\u003e• ECO mode enable \/ disable sensitivity setting (setting the level when the drive \"sleeps\" and when it \"wakes up\" again)\u003cbr\/\u003e \u003cbr\/\u003eMonitoring is also available:\u003cbr\/\u003e• input and output voltage and current, temperature, alarms\u003cbr\/\u003e \u003cbr\/\u003eHigh starting power\u003cbr\/\u003eNeeded to start loads such as power converters for LED lamps, halogen lamps or power tools.\u003cbr\/\u003e \u003cbr\/\u003eECO mode\u003cbr\/\u003eIn ECO mode - when the load power drops below the preset value, the inverter switches to standby mode (it sleeps and the inverter's own consumption is then only about 1W). In standby mode with very low self-consumption, the inverter will then switch on regularly for a short time (adjustable parameter, default: every 2.5 seconds). If the load power exceeds the preset value, the inverter switches on again. Thanks to this function, you save a large amount of energy that the inverter would otherwise consume for its operation.\u003cbr\/\u003e \u003cbr\/\u003eVE.Direct communication port that can be connected to:\u003cbr\/\u003e \u003cbr\/\u003e• Computers (VE.Direct to USB cable required)\u003cbr\/\u003e• Apple and Android smartphones, MacBooks and other devices (VE.Direct Bluetooth dongle required)\u003cbr\/\u003e \u003cbr\/\u003eFree software\u003cbr\/\u003eCurrent SW versions are available here https:\/\/www.victronenergy.com\/support-and-downloads\/software#victronconnect-app\u003cbr\/\u003e \u003cbr\/\u003eRemote on \/ off, LED diagnostics - see manual.\u003cbr\/\u003e \u003cbr\/\u003eCables for connection to the battery are not included, we will be happy to make the necessary lengths for you. So do not hesitate to contact us.\u003cbr\/\u003e\u003cbr\/\u003eTechnical parameters:\u003cbr\/\u003eContinuous output power at 25 ° C (VA): 1200\u003cbr\/\u003eContinuous active power at 25 ° C \/ 40 ° C (W): 1000\/850\u003cbr\/\u003ePeak active power (W): 2200\u003cbr\/\u003eWeight (kg): 7.4\u003cbr\/\u003eDimensions h x w x d (mm): 117x232x327\u003cbr\/\u003e\u003cbr\/\u003eTechnical specifications can be found in the downloadable documents below","brand":"VICTRON ENERGY","offers":[{"title":"Default Title","offer_id":52541842915666,"sku":"04230482","price":6850.0,"currency_code":"CZK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0954\/9624\/1490\/files\/04230482_8890191f-4836-4f3a-ab0b-b723fba0fd89.png?v=1776146107"},{"product_id":"stridac-hybridni-10kw-geti-gf-i10h3","title":"Hybrid inverter 10kW Geti GF-I10H3","description":"The modern inverter with low self-consumption offers four modes of operation: hybrid, islanded, UPS and dual-tariff (without certification). It combines the functions of a conventional inverter with the possibility of efficient use of battery storage. With a fully asymmetrical three-phase output, it allows flexible power management and storage of excess solar energy in batteries for later use. This increases the energy independence of the building and ensures a reliable supply of electricity even in the event of a utility grid failure.\u003cbr\/\u003e\u003cbr\/\u003eThe main advantages include the possibility of hybrid connection with the grid or island operation without the grid and a fully asymmetrical three-phase output that ensures optimal power distribution according to current needs. It allows energy storage in batteries for efficient use of surpluses and greater savings. It has a back-up output (Back-Up) that provides power to selected appliances during grid failure and in Off-Grid mode. The inverter features minimal self-consumption and allows for quick and easy installation with simple connection of PV panels, batteries and distribution grid.\u003cbr\/\u003e\u003cbr\/\u003eThe device is equipped with a clear display providing operation statistics. The mode of operation can be configured in detail, including the choice of power and battery charging priority (solar or grid). Monitoring of the system is easy with a mobile app or web interface. The inverter also provides sound and light alerts for error conditions. The DRED port allows it to respond to signals requested by another device, such as an HDO switch.\u003cbr\/\u003e\u003cbr\/\u003eSpecifications:\u003cbr\/\u003e\u003cbr\/\u003ePhotovoltaic input\u003cbr\/\u003e- max. panel power: 15000 W\u003cbr\/\u003e- max. panel voltage: 1000V DC\u003cbr\/\u003e- MPPT voltage range: 200 - 850V DC\u003cbr\/\u003e- max. current per string: 13 A\u003cbr\/\u003e- number of input strings: 2\u003cbr\/\u003e- Number of MPPT trackers: 2\u003cbr\/\u003e\u003cbr\/\u003eBattery input\u003cbr\/\u003e- Battery type: Li-Ion\u003cbr\/\u003e- Battery voltage range: 180 - 650V\u003cbr\/\u003e- Max. charging\/discharging current: 25\/25A\u003cbr\/\u003e- Li-Ion battery charge control: automatic adaptation to BMS\u003cbr\/\u003e\u003cbr\/\u003eAC output\u003cbr\/\u003e- rated power: 10000 VA\u003cbr\/\u003e- Peak power: 11000 VA\u003cbr\/\u003e- max. output current: 17 A\u003cbr\/\u003e- output characteristic: 400V AC 50 Hz \/ 350V AC 60 Hz\u003cbr\/\u003e- Output frequency range: 45 - 55 Hz (280 - 490V AC)\u003cbr\/\u003e- Power factor: 0.8\u003cbr\/\u003e- harmonic factor: \u003c 3%\u003cbr\/\u003e- mains type: 3W\/N\/PE\u003cbr\/\u003e- Asymmetrical output: 0 - 100%\u003cbr\/\u003e\u003cbr\/\u003eAC backup output\u003cbr\/\u003e- max. peak power: 10000 VA\u003cbr\/\u003e- rated output voltage: 400\/380 V AC\u003cbr\/\u003e- rated output frequency: 50\/60 Hz\u003cbr\/\u003e- voltage deviation at linear load: \u003c 3%\u003cbr\/\u003e\u003cbr\/\u003eEfficiency\u003cbr\/\u003e- Max. inverter efficiency: 98.2%\u003cbr\/\u003e- European efficiency: 97.5%\u003cbr\/\u003e- MPPT controller efficiency: 99.9%\u003cbr\/\u003e\u003cbr\/\u003eProtection and security\u003cbr\/\u003e- DC reverse polarity: yes\u003cbr\/\u003e- DC circuit breaker: yes\u003cbr\/\u003e- DC\/AC surge protector (SPD): yes\u003cbr\/\u003e- Leakage current detection: yes\u003cbr\/\u003e- Insulation resistance detection: yes\u003cbr\/\u003e- current protector: yes\u003cbr\/\u003e- Output short-circuit protection: yes\u003cbr\/\u003e- battery reverse polarity protection: yes\u003cbr\/\u003e\u003cbr\/\u003eOther parameters\u003cbr\/\u003e- dimensions: 548 x 444 x 184 mm\u003cbr\/\u003e- weight: 27 kg\u003cbr\/\u003e- operating temperature range: -25 to +60°C\u003cbr\/\u003e- degree of protection: IP65\u003cbr\/\u003e- cooling type: passive air flow\u003cbr\/\u003e- design: transformerless\u003cbr\/\u003e- display: LDC\u003cbr\/\u003e- humidity: 0 - 95%\u003cbr\/\u003e- communication: GPRS \/ Wi-Fi\u003cbr\/\u003e- Communication with BMS: CAN \/ RS485\u003cbr\/\u003e- communication with meter: RS485\u003cbr\/\u003e- DRED communication: RS485\u003cbr\/\u003e- Certification: CQC, VDE-AR-N4105, VDE0126-1-1, AS4777, IEC61727, IEC62116","brand":"GETI","offers":[{"title":"Default Title","offer_id":52541919494482,"sku":"04230523","price":16999.0,"currency_code":"CZK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0954\/9624\/1490\/files\/04230523_57836a32-0869-4d41-b335-837c366d84b2.png?v=1776334938"},{"product_id":"stridac-hybridni-10kw-solax-x3-hybrid-10-0-d","title":"SolaX X3-HYBRID-10.0-D 10 kW hybrid inverter","description":"Az új háromfázisú X-Hybrid inverter SolaX X3-HYBRID G4 aszimmetrikus kimenettel az egyik vezető globális gyártó egyik legnépszerűbb inverterének negyedik generációja a piacon. A nagyfokú alkalmazási rugalmasság és az egyszerű skálázhatóság nagyon kedvező árú PV telepítési megoldást kínál otthoni és üzleti felhasználásra, standard 10 éves garanciával. Az inverter az akkumulátortárolóval együtt teljes és automatizált PV-rendszert alkot hálózati és szigetcsatlakozáshoz, és a teljes teljesítmény növelése érdekében akár tíz egység egyidejű párhuzamos üzemeltetése is lehetséges. A beépített EPS (vészhelyzeti áramellátás) és a távoli kommunikáció lehetősége, beleértve a Wi-Fi modulon keresztül történő felügyeletet is, szintén előnyök.\u003cbr\/\u003e\u003cbr\/\u003eAz X3-HYBRID-10.0-D G4 inverter teljes mértékben megfelel az SVT30597 kódú Új Zöld Megtakarítás támogatási programnak.\u003cbr\/\u003e\u003cbr\/\u003eFigyelem! A teljes rendszer telepítéséhez a következő elemeket kell megvásárolni!\u003cbr\/\u003e\u003cbr\/\u003e04250541 - SolaX Triple Power Master akkumulátor T-BAT H 5,8 kWH\u003cbr\/\u003e04250542 - SolaX Triple Power Slave akkumulátor 5.8 kWh\u003cbr\/\u003e04290108 - SolaX DTSU666 háromfázisú teljesítménymérő\u003cbr\/\u003e04290172 - SolaX Pocket Wifi 3.0\u003cbr\/\u003e\u003cbr\/\u003e\u003cbr\/\u003eTermék paraméterek\u003cbr\/\u003e\u003cbr\/\u003e- Háromfázisú aszimmetrikus kimenet\u003cbr\/\u003e- akár 10 egység párhuzamos üzemeltetése egyidejűleg lehetséges\u003cbr\/\u003e- sziget és hálózati csatlakozás\u003cbr\/\u003e- A PV-kimenet 150%-os túlméretezésének ellenállása\u003cbr\/\u003e- gyors töltés és a tárolt energia rendkívül hatékony felhasználása\u003cbr\/\u003e- nagyon egyszerű üzembe helyezés és beállítás (30 percen belül)\u003cbr\/\u003e- a hálózatba történő túlfolyások korlátozása vagy teljes leállítása\u003cbr\/\u003e- maximális töltési és kisütési áram 30 A\u003cbr\/\u003e- távvezérlés és távfelügyelet Wi-Fi-n keresztül\u003cbr\/\u003e- maximális teljesítmény leadása akár -35 °C-os hőmérsékleten is\u003cbr\/\u003e\u003cbr\/\u003e\u003cbr\/\u003eMűszaki paraméterek\u003cbr\/\u003e\u003cbr\/\u003eBemenet (DC)\u003cbr\/\u003e- max. ajánlott PV teljesítmény (W): 15000\u003cbr\/\u003e- max. DC feszültség (V): 1000\u003cbr\/\u003e- Névleges egyenáramú üzemi feszültség: 630\u003cbr\/\u003e- max. bemeneti áram (A bemenet \/ B bemenet): 26 \/ 14 A\u003cbr\/\u003e- max. rövidzárlati áram (A bemenet \/ B bemenet): 30 \/ 16 A\u003cbr\/\u003e- MPPT feszültségtartomány (V): 180 - 950\u003cbr\/\u003e- Kezdeti üzemi feszültség (V): 200\u003cbr\/\u003e- MPP-követők száma: 2(2\/1)\u003cbr\/\u003e\u003cbr\/\u003eBemenet (AC)\u003cbr\/\u003e- Névleges AC teljesítmény (VA): 10000\u003cbr\/\u003e- Maximális váltakozó áram (A): 32\u003cbr\/\u003e- Névleges hálózati feszültség (V): 415\/240; 400\/230; 380\/220\u003cbr\/\u003e- Névleges frekvencia (Hz): 50\/60\u003cbr\/\u003e\u003cbr\/\u003eKimenet (AC)\u003cbr\/\u003e- Névleges AC kimenet (VA): 10000\u003cbr\/\u003e- Maximális látszólagos AC teljesítmény (VA): 11000\u003cbr\/\u003e- Névleges hálózati feszültség (V): 415\/240; 400\/230; 380\/220\u003cbr\/\u003e- Névleges frekvencia (Hz): 50\/60\u003cbr\/\u003e- Névleges váltakozó áram (A): 14,5\u003cbr\/\u003e- Maximális váltakozó áram (A): 16,1\u003cbr\/\u003e- Teljesítménytényező: 0,8 és 0,8 között\u003cbr\/\u003e- Névleges teljesítmény (%): \u003c3\u003cbr\/\u003e\u003cbr\/\u003eEgyenáramú bemenet (akkumulátor)\u003cbr\/\u003e- Akkumulátor típusa: ólom \/ lítium\u003cbr\/\u003e- Akkumulátor feszültségtartomány (V): 180 - 650\u003cbr\/\u003e- ajánlott akkumulátorfeszültség (V): 400\u003cbr\/\u003e- max. folyamatos kisütési áram (A): 30\u003cbr\/\u003e- Kommunikációs interfész: CAN\/RS485\u003cbr\/\u003e- Fordított polaritásvédelem: igen\u003cbr\/\u003e\u003cbr\/\u003eKIKAPCSOLÁSI kimenet (akkumulátorral)\u003cbr\/\u003e- Névleges AC teljesítmény (VA): 10000\u003cbr\/\u003e- Névleges feszültség (V), frekvencia (Hz): 400 \/ 230 VAC; 50 \/ 60\u003cbr\/\u003e- Max. folyamatos áram (A): 14,5\u003cbr\/\u003e- Látszólagos teljesítmény (VA), időtartam (s): 15000 \/ 60\u003cbr\/\u003e- Átmeneti idő (ms): \u003c10\u003cbr\/\u003e- TH Dv, lineáris terhelés (%): \u003c3\u003cbr\/\u003e\u003cbr\/\u003eHatékonyság:\u003cbr\/\u003e- MPPT hatásfok (%): 99,9\u003cbr\/\u003e- Euro hatásfok (%): 97,7\u003cbr\/\u003e- Maximális hatásfok (%): 98,0\u003cbr\/\u003e- Az akkumulátor töltési\/kisülési hatékonysága (%): 98,5 \/ 97,0\u003cbr\/\u003e\u003cbr\/\u003eEgyéb\u003cbr\/\u003e- Készenléti energiafogyasztás (W): \u003c20\u003cbr\/\u003e- Biztonság: IEC62109-1 \/ IEC62109-2\u003cbr\/\u003e- EMC: EN61000-6-1 \/ EN61000-6-2 \/ EN61000-6-3\u003cbr\/\u003e- Tanúsítás: VDE 0126-1-1 AL:2012 \/ VDE-AR-N 4105 \/ G98 \/ G99 \/ AS4777 \/ EN50549 \/CEi 0-21\u003cbr\/\u003e- max. üzemi magasság (m): 3000\u003cbr\/\u003e- Tipikus zajkibocsátás (dB): 40\u003cbr\/\u003e- hűtés: passzív\u003cbr\/\u003e- kijelző háttérvilágítás: igen\u003cbr\/\u003e- üzemi hőmérséklet (°C): -35 és +60 között\u003cbr\/\u003e- Az EPD méretei (mm): 482 x 417 x 181\u003cbr\/\u003e- súly (kg): 30\u003cbr\/\u003e- védettségi fok: IP65\u003cbr\/\u003e\u003cbr\/\u003e","brand":"SOLAX","offers":[{"title":"Default Title","offer_id":52541936927058,"sku":"04230526","price":66999.0,"currency_code":"CZK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0954\/9624\/1490\/files\/04230526_5e86b1bc-8a4c-4c8a-b849-3371dd2ee86d.png?v=1776147138"},{"product_id":"stridac-hybridni-deye-sun-30k-sg01hp3-eu-bm3-30kw-3f-hv-eg-d","title":"Hybrid invertor DEYE SUN-30K-SG01HP3-EU-BM3, 30kW, 3F, HV","description":"SUN-30K-SG01HP3-EU-BM3 is a brand new series of three-phase hybrid inverters supporting 160-700V HV battery, ensuring higher system efficiency and lower waste heat production. Thanks to the compact, sophisticated design and first-class technologies, this series manages to increase the power of the PV system by up to 30% compared to the rated power of the inverter (DC\/AC ratio = 1.3). This eliminates the need to always choose a model with the same performance for the PV system, which brings savings in the cost of installation. It supports three-phase asymmetric output up to 150% for the widest possible application in various conditions. The color LCD display provides a user-friendly interface for both system overview and configuration (battery management, AC\/solar charging depending on different applications, etc.). The biggest advantage of this converter is the adjustable \"smart load\" input\/output where you can connect a generator, string converter, or heating cartridge for heating water. The options of this port offer you to use similar functions as the wattrouter.\u003cbr\/\u003e\u003cbr\/\u003e\u003cbr\/\u003eMain parameters\u003cbr\/\u003e\u003cbr\/\u003eHigh voltage design for higher efficiency\u003cbr\/\u003e3-phase asymmetrical output\u003cbr\/\u003eThree MPPT trackers\u003cbr\/\u003eSix string inputs (12 connectors)\u003cbr\/\u003eWorking voltage MPPT 150 - 850V\u003cbr\/\u003eIntelligent monitoring platform\u003cbr\/\u003eUnique functions Smart Load, Grid peak shaving, phase balancing\u003cbr\/\u003ePossibility to connect up to 10 parallel units\u003cbr\/\u003e6 time windows for charging and discharging\u003cbr\/\u003e\u003cbr\/\u003eThis device is in the list of products of the New Green Savings program (SVT34120)\u003cbr\/\u003e\u003cbr\/\u003eTechnical parameters\u003cbr\/\u003e\u003cbr\/\u003eBattery\u003cbr\/\u003eBattery type: lithium-ion\u003cbr\/\u003eBattery voltage: 160 - 800 VDC\u003cbr\/\u003eMax. charging current: 50 + 50 A\u003cbr\/\u003eMax. discharge current: 50 + 50 A\u003cbr\/\u003eNumber of battery inputs: 2\u003cbr\/\u003e\u003cbr\/\u003ePV input\u003cbr\/\u003eMax. PV power: 39000 W\u003cbr\/\u003eMax. DC Voltage: 1000V\u003cbr\/\u003eStarting voltage: 180V\u003cbr\/\u003eMax. input short-circuit current: 55 + 55 + 55 A\u003cbr\/\u003eMax. input operating current: 36 + 36 + 36 A\u003cbr\/\u003e\u003cbr\/\u003eAC input \/ output\u003cbr\/\u003eRated active power: 30000 W\u003cbr\/\u003eRated reactive power: 33000 VA\u003cbr\/\u003eMax. overload: 1.5x rated power after 10s\u003cbr\/\u003eRated voltage: 220 \/ 380 V, 230 \/ 400 V\u003cbr\/\u003eConnection type: 3L + N + PE\u003cbr\/\u003eMains frequency: 45 to 65 Hz\u003cbr\/\u003e\u003cbr\/\u003eEfficiency\u003cbr\/\u003eMax. efficiency: 97.6%\u003cbr\/\u003eEURO efficiency: 97%\u003cbr\/\u003eMPPT efficiency: \u003e99%\u003cbr\/\u003e\u003cbr\/\u003eProtection function\u003cbr\/\u003eDC polarity reversal\u003cbr\/\u003eAC current overload\u003cbr\/\u003eAC overvoltage\u003cbr\/\u003eAC output short circuit\u003cbr\/\u003eDetection of the DC component on the AC output\u003cbr\/\u003eOvervoltage during a sharp drop in load\u003cbr\/\u003eLeakage current detection in PE\u003cbr\/\u003eArc interrupter\u003cbr\/\u003eMonitoring of the electrical network\u003cbr\/\u003eIsland isolation function\u003cbr\/\u003eEarth fault detection\u003cbr\/\u003eDC input switch\u003cbr\/\u003eDC terminal block resistance detection\u003cbr\/\u003eResidual Current Device (RCD)\u003cbr\/\u003eOverheating\u003cbr\/\u003ePower surges\u003cbr\/\u003eSurge Protection Class: Type II (AC), Type II (DC)\u003cbr\/\u003e\u003cbr\/\u003eOther parameters\u003cbr\/\u003eWorking temperature: -40°C to +60°C\u003cbr\/\u003eAir humidity: 0 - 100%\u003cbr\/\u003eMax. altitude: 2000 m\u003cbr\/\u003eNoise level: ? 55 dB\u003cbr\/\u003eCooling: active intelligently controlled\u003cbr\/\u003eTopology: non-isolated\u003cbr\/\u003eNetwork standards: IEC 61727,IEC 62116,CEI 0-21,EN 50549,NRS 097,RD 140,UNE 217002,OVE-Richtlinie R25,G99,VDE-AR-N 4105\u003cbr\/\u003eSafety standards: IEC\/EN 61000-6-1\/2\/3\/4, IEC\/EN 62109-1, IEC\/EN 62109-2\u003cbr\/\u003eOvervoltage protection class: OVC II (DC), OVC III (AC)\u003cbr\/\u003eDimensions: 527 x 894 x 294 mm (without connectors and brackets)\u003cbr\/\u003eWeight: 80 kg\u003cbr\/\u003eDegree of protection: IP65","brand":"DEYE","offers":[{"title":"Default Title","offer_id":52541948592466,"sku":"04230654","price":93500.0,"currency_code":"CZK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0954\/9624\/1490\/files\/04230654_13149c7c-45d5-4de8-9a75-6d7ca10f5116.png?v=1776148661"},{"product_id":"menic-napeti-victron-energy-1600va-12v-smart","title":"Voltage converter Victron Energy 1600VA 12V Smart","description":"New in the Victron Energy offer. Fully programmable sine wave inverter 12V\/1600VA with built-in Bluetooth, wireless settings and ECO mode.\u003cbr\/\u003e\u003cbr\/\u003eProven reliability of professional Victron Energy inverters \u003cbr\/\u003e \u003cbr\/\u003eHigh starting power\u003cbr\/\u003eThe power required to start loads such as power converters for LED lamps, halogen lamps or power tools.\u003cbr\/\u003e \u003cbr\/\u003eThe drive incorporates a robust toroidal transformer which has proven its reliability in Victron Energy drives for many years.\u003cbr\/\u003e \u003cbr\/\u003eThe inverters are short-circuit proof and protected against overheating, either due to overload or\u003cbr\/\u003ehigh ambient temperatures.\u003cbr\/\u003e\u003cbr\/\u003eBuilt-in Bluetooth technology and Victron Connect App\u003cbr\/\u003e \u003cbr\/\u003eThis inverter has built-in Bluetooth technology and is fully configurable via tablet or smartphone. This is a completely unique function and you can therefore set the parameters of the converter and monitor the operation simply wirelessly.\u003cbr\/\u003e \u003cbr\/\u003eSetting options:\u003cbr\/\u003e• Low battery voltage alarm\u003cbr\/\u003e• Setting the voltage level for switching off and restarting the inverter when the battery is discharged\u003cbr\/\u003e• Dynamic disconnection from the battery during discharge: the voltage level for disconnection is dependent on the size of the load\u003cbr\/\u003e• Output voltage: 210 - 245V\u003cbr\/\u003e• Frequency: 50 Hz or 60 Hz\u003cbr\/\u003e• ECO mode on \/ off and ECO shooting level\u003cbr\/\u003e• Alarm relay\u003cbr\/\u003e\u003cbr\/\u003eMonitoring:\u003cbr\/\u003e• Input and output voltage, load level and alarms\u003cbr\/\u003e \u003cbr\/\u003eDownload the application for free under the name VictronConnect app in the App Store or Google Play.\u003cbr\/\u003eThe application can be downloaded from this software page of the manufacturer Victron Energy:\u003cbr\/\u003e \u003cbr\/\u003eIf you prefer to set up and monitor via cable and PC, the inverter is equipped with a VE.Direct communication port that you can connect to using a VE.Direct to USB cable\u003cbr\/\u003e \u003cbr\/\u003eECO mode\u003cbr\/\u003eIn ECO mode - when the load power drops below the preset value, the inverter switches to standby mode (it goes to sleep and the inverter's own consumption is then only approx. 0.6W). In standby mode with very low self-consumption, the inverter will then switch on periodically for a short time (adjustable parameter, default: every 2.5 seconds). If the load power exceeds the preset value, the inverter will turn on again. Thanks to this function, you save a large amount of energy that the inverter would otherwise consume for its operation.\u003cbr\/\u003e \u003cbr\/\u003eRemote on\/off\u003cbr\/\u003eA remote on\/off switch or relay contact can be connected to the two-pole connector.\u003cbr\/\u003e\u003cbr\/\u003eTechnical parameters:\u003cbr\/\u003eContinuous output power at 25°C (VA): 1600\u003cbr\/\u003eContinuous active power at 25°C \/ 40°C (W): 1300\/1200\u003cbr\/\u003ePeak active power (W): 3000\u003cbr\/\u003eWeight (kg): 12\u003cbr\/\u003eDimensions hxwxd (mm): 485x219x125\u003cbr\/\u003e\u003cbr\/\u003eTechnical specifications can be found in the downloadable documents below","brand":"VICTRON ENERGY","offers":[{"title":"Default Title","offer_id":52541958521170,"sku":"04230537","price":14390.0,"currency_code":"CZK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0954\/9624\/1490\/files\/04230537_d0bebb98-4d9d-4b94-ae36-f543ac8413c9.png?v=1776147304"},{"product_id":"menic-napeti-victron-energy-2000va-12v-smart","title":"Voltage converter Victron Energy 2000VA 12V Smart","description":"Fully programmable sine wave inverter 12V\/2000VA with built-in Bluetooth, wireless settings and ECO mode.\u003cbr\/\u003e\u003cbr\/\u003e\u003cbr\/\u003eProduct parameters:\u003cbr\/\u003e\u003cbr\/\u003eHigh starting power\u003cbr\/\u003eThe power required to start loads such as power converters for LED lamps, halogen lamps or power tools.\u003cbr\/\u003eThe drive incorporates a robust toroidal transformer which has proven its reliability in Victron Energy drives for many years.\u003cbr\/\u003eThe inverters are short-circuit proof and protected against overheating, whether due to overload or high ambient temperature.\u003cbr\/\u003e\u003cbr\/\u003eBuilt-in Bluetooth technology and Victron Connect App\u003cbr\/\u003eThis inverter has built-in Bluetooth technology and is fully configurable via tablet or smartphone. This is a completely unique function and you can therefore set the parameters of the converter and monitor the operation simply wirelessly.\u003cbr\/\u003e \u003cbr\/\u003eSetting options:\u003cbr\/\u003e• Low battery voltage alarm\u003cbr\/\u003e• Setting the voltage level for switching off and restarting the inverter when the battery is discharged\u003cbr\/\u003e• Dynamic disconnection from the battery during discharge: the voltage level for disconnection is dependent on the size of the load\u003cbr\/\u003e• Output voltage: 210 - 245V\u003cbr\/\u003e• Frequency: 50 Hz or 60 Hz\u003cbr\/\u003e• ECO mode on \/ off and ECO shooting level\u003cbr\/\u003e• Alarm relay\u003cbr\/\u003e \u003cbr\/\u003eMonitoring:\u003cbr\/\u003e• Input and output voltage, load level and alarms\u003cbr\/\u003e \u003cbr\/\u003eDownload the application for free under the name VictronConnect app in the App Store or Google Play.\u003cbr\/\u003eThe application can be downloaded from this software page of the manufacturer Victron Energy:\u003cbr\/\u003e \u003cbr\/\u003eIf you prefer to set up and monitor via cable and PC, the inverter is equipped with a VE.Direct communication port that you can connect to using a VE.Direct to USB cable\u003cbr\/\u003e \u003cbr\/\u003eECO mode\u003cbr\/\u003eIn ECO mode - when the load power drops below the preset value, the inverter switches to standby mode (it goes to sleep and the inverter's own consumption is then only approx. 0.6W). In standby mode with very low self-consumption, the inverter will then switch on periodically for a short time (adjustable parameter, default: every 2.5 seconds). If the load power exceeds the preset value, the inverter will turn on again. Thanks to this function, you save a large amount of energy that the inverter would otherwise consume for its operation.\u003cbr\/\u003e \u003cbr\/\u003eRemote on\/off\u003cbr\/\u003eA remote on\/off switch or relay contact can be connected to the two-pole connector.\u003cbr\/\u003e \u003cbr\/\u003eCables for connecting to the battery are not included.\u003cbr\/\u003e\u003cbr\/\u003e\u003cbr\/\u003eTechnical parameters:\u003cbr\/\u003e\u003cbr\/\u003e- continuous output power at 25°C (VA): 2000\u003cbr\/\u003e- continuous active power at 25 °C \/ 40 °C (W): 1600 \/ 1450\u003cbr\/\u003e- peak active power (W): 4000\u003cbr\/\u003e- weight (kg): 13\u003cbr\/\u003e- dimensions h x w x d (mm): 485 x 219 x 125\u003cbr\/\u003e\u003cbr\/\u003eTechnical specifications can be found in the downloadable documents below.","brand":"VICTRON ENERGY","offers":[{"title":"Default Title","offer_id":52541958717778,"sku":"04230538","price":16490.0,"currency_code":"CZK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0954\/9624\/1490\/files\/04230538_57dc6d63-3604-4e8d-8129-137d13225234.png?v=1776147305"},{"product_id":"menic-napeti-smart-victron-energy-3000va-48v","title":"Voltage converter Smart Victron Energy 3000VA 48V","description":"New in the Victron Energy offer. Fully programmable sine 48V\/3000VA inverter with built-in Bluetooth, wireless settings and ECO mode.\u003cbr\/\u003e\u003cbr\/\u003eHigh starting power\u003cbr\/\u003eThe power required to start loads such as power converters for LED lamps, halogen lamps or power tools.\u003cbr\/\u003e \u003cbr\/\u003eThe drive incorporates a robust toroidal transformer which has proven its reliability in Victron Energy drives for many years.\u003cbr\/\u003e \u003cbr\/\u003eThe inverters are short-circuit proof and protected against overheating, either due to overload or\u003cbr\/\u003ehigh ambient temperatures.\u003cbr\/\u003e\u003cbr\/\u003eBuilt-in Bluetooth technology and Victron Connect App\u003cbr\/\u003e \u003cbr\/\u003eThis inverter has built-in Bluetooth technology and is fully configurable via tablet or smartphone. This is a completely unique function and you can therefore set the parameters of the converter and monitor the operation simply wirelessly.\u003cbr\/\u003e \u003cbr\/\u003eSetting options:\u003cbr\/\u003e• Low battery voltage alarm\u003cbr\/\u003e• Setting the voltage level for switching off and restarting the inverter when the battery is discharged\u003cbr\/\u003e• Dynamic disconnection from the battery during discharge: the voltage level for disconnection is dependent on the size of the load\u003cbr\/\u003e• Output voltage: 210 - 245V\u003cbr\/\u003e• Frequency: 50 Hz or 60 Hz\u003cbr\/\u003e• ECO mode on \/ off and ECO shooting level\u003cbr\/\u003e• Alarm relay\u003cbr\/\u003e\u003cbr\/\u003eMonitoring:\u003cbr\/\u003e• Input and output voltage, load level and alarms\u003cbr\/\u003e \u003cbr\/\u003eDownload the application for free under the name VictronConnect app in the App Store or Google Play.\u003cbr\/\u003eThe application can be downloaded from this software page of the manufacturer Victron Energy:\u003cbr\/\u003e \u003cbr\/\u003eIf you prefer to set up and monitor via cable and PC, the inverter is equipped with a VE.Direct communication port that you can connect to using a VE.Direct to USB cable\u003cbr\/\u003e \u003cbr\/\u003eECO mode\u003cbr\/\u003eIn ECO mode - when the load power drops below the preset value, the inverter switches to standby mode (it goes to sleep and the inverter's own consumption is then only approx. 0.6W). In standby mode with very low self-consumption, the inverter will then switch on periodically for a short time (adjustable parameter, default: every 2.5 seconds). If the load power exceeds the preset value, the inverter will turn on again. Thanks to this function, you save a large amount of energy that the inverter would otherwise consume for its operation.\u003cbr\/\u003e \u003cbr\/\u003eRemote on\/off\u003cbr\/\u003eA remote on\/off switch or relay contact can be connected to the two-pole connector.\u003cbr\/\u003e \u003cbr\/\u003eCables for connection to the battery are not included, we will be happy to make the necessary lengths for you. So don't hesitate to contact us.\u003cbr\/\u003e\u003cbr\/\u003eTechnical parameters:\u003cbr\/\u003eContinuous output power at 25°C (VA): 3000\u003cbr\/\u003eContinuous active power at 25°C \/ 40°C (W): 2400\/2200\u003cbr\/\u003ePeak active power (W): 6000\u003cbr\/\u003eWeight (kg): 19\u003cbr\/\u003eDimensions hxwxd (mm): 485x285x150\u003cbr\/\u003e\u003cbr\/\u003eTechnical specifications can be found in the downloadable documents below","brand":"VICTRON ENERGY","offers":[{"title":"Default Title","offer_id":52541958947154,"sku":"04230547","price":18219.0,"currency_code":"CZK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0954\/9624\/1490\/files\/04230547_131d1dcb-c074-4419-9450-225881da7ebf.png?v=1775540527"},{"product_id":"menic-napeti-kemot-urz3416-prosolar-800-500w-12v-black","title":"Voltage converter KEMOT URZ3416 PROsolar-800 500W 12V Black","description":"It converts the direct voltage produced by photovoltaic panels into alternating voltage (230V\/50Hz) for photovoltaic power plants.\u003cbr\/\u003e\u003cbr\/\u003eThe device is also suitable for powering electrical devices requiring 230V alternating voltage and as an emergency power source it will ensure trouble-free operation of devices requiring continuous power supply, e.g. central heating pumps or alarm and monitoring systems.\u003cbr\/\u003e\u003cbr\/\u003eKEMOT solar converters are an additional source of electrical energy obtained from solar energy, which in the event of a power failure will support all devices requiring constant power from the grid in your home. Importantly, the device needs a maximum of 6 milliseconds to switch between individual modes.\u003cbr\/\u003e\u003cbr\/\u003ePV priority mode\u003cbr\/\u003e1. During the day (sunlight is enough) and the devices are also connected to the network: the photovoltaic cells will power the external device and charge the battery at the same time (the network will be in standby mode during this time).\u003cbr\/\u003e2. In the evening, the system will power the device from the battery until the low voltage protection is activated; then the system automatically switches to AC and charges the battery to a certain level to provide power in an emergency. The battery will be fully charged by the PV cell when the PV power is restored.\u003cbr\/\u003e\u003cbr\/\u003eAC priority mode\u003cbr\/\u003e1. Mains power is available: devices will be mains powered. The solar cells will charge the battery.\u003cbr\/\u003e2. In case of out-of-range voltage or mains power failure: Connected devices will be powered by battery and photovoltaic cells to maintain power continuity. If the power from the photovoltaic cells is unavailable or insufficient, the connected devices will be powered only by the battery.\u003cbr\/\u003e\u003cbr\/\u003ePure sine wave\u003cbr\/\u003eSolar converters from the PROsolar series are suitable for all devices that are extremely sensitive to the slightest changes in the shape of the voltage. Their advantage is a clean sine wave of the output voltage (supplying the load), thanks to which the devices ensure stable operation and prevent the effect of overheating of inductive loads. Together with the battery, it forms a complete 230 VAC guaranteed power supply device.\u003cbr\/\u003e\u003cbr\/\u003eThe KEMOT PROsolar-500 solar inverter has a solid cover, equipped with a holder that allows it to be hung on a wall, for example in a boiler room or electrical switchboard.\u003cbr\/\u003e\u003cbr\/\u003e• Pure sinusoidal waveform\u003cbr\/\u003e• Wide compatibility (possibility of connecting different devices)\u003cbr\/\u003e• Toroidal transformer C.R.G.O\u003cbr\/\u003e• Control by two processors\u003cbr\/\u003e• High efficiency\u003cbr\/\u003e• Efficient MPPT solar charge controller\u003cbr\/\u003e• Two modes: network priority and photovoltaic\u003cbr\/\u003e• Automatic protection and signaling: against short circuit, too high \/ low voltage, overheating\u003cbr\/\u003e\u003cbr\/\u003eTechnical parameters:\u003cbr\/\u003e\u003cbr\/\u003e- Model: URZ3416 - 800 VA\u003cbr\/\u003e- Power: 500 W\u003cbr\/\u003e- Battery voltage: 12 V DC\u003cbr\/\u003e- Operating mode: PV (PV \/ PV priority) \/ AC (AC \/ grid priority)\u003cbr\/\u003e- PV mode:\u003cbr\/\u003e- Input voltage range: 12 V DC - 50 V DC\u003cbr\/\u003e- Max. charging current: 20 A (depending on the PV cell used)\u003cbr\/\u003e- Max. conversion efficiency: 98%\u003cbr\/\u003e- AC mode:\u003cbr\/\u003e- Input voltage range: 190V AC ~ 260V AC\u003cbr\/\u003e- Input frequency range: 45-65Hz Range\u003cbr\/\u003e- Output voltage: 218V AC ~ 241V AC\u003cbr\/\u003e- Input power factor (AC \/ DC): 98%\u003cbr\/\u003e- Efficiency: network operation \u003e = 96%\u003cbr\/\u003e- Charging current: 10 A\u003cbr\/\u003e- Converter output:\u003cbr\/\u003e- Inverter output voltage: 230 V ± 3%\u003cbr\/\u003e- Output frequency: 50 Hz \/ 60 Hz ± 0.3 Hz\u003cbr\/\u003e- Output power factor: \u003e = 0.8\u003cbr\/\u003e- Waveform distortion: Resistive load = \u003c3%\u003cbr\/\u003e- Switching time from PV to AC mode: standard 4 ms; max. 6 ms\u003cbr\/\u003e- Efficiency: Inverter Mode \u003e = 80%\u003cbr\/\u003e- Inverter overload: 110%-130% shutdown after 30s, 130%-150% shutdown after 3s\u003cbr\/\u003e- Short circuit: Automatic shutdown\u003cbr\/\u003e- Ambient temperature 0 ~ 40 °C\u003cbr\/\u003e- Air humidity 10% ~ 90%\u003cbr\/\u003e- Noise level = \u003c50 dB\u003cbr\/\u003e- Dimensions: 25.5x26x16 cm\u003cbr\/\u003e- Weight: 5.95 kg","brand":"KEMOT","offers":[{"title":"Default Title","offer_id":52541962813778,"sku":"08840316","price":3312.0,"currency_code":"CZK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0954\/9624\/1490\/files\/08840316_c7bec507-f304-4bec-bdef-8501823e3e74.png?v=1772442612"},{"product_id":"menic-napeti-victron-energy-375va-24v-ve-direct","title":"Voltage converter SINUS Victron Energy 375VA 24V VE.Direct","description":"The drive features a rugged toroidal transformer that has proven its reliability in Victron Energy drives for many years.\u003cbr\/\u003eThe inverters are short - circuit proof and protected against overheating, whether due to overload or overload\u003cbr\/\u003ehigh ambient temperatures.\u003cbr\/\u003e \u003cbr\/\u003eThis inverter is fully configurable - it is a completely unique function, where you can set the following parameters using a PC:\u003cbr\/\u003e• Low and high battery alarm and reset level\u003cbr\/\u003e• Inverter shutdown level at low and high battery voltage and reset level\u003cbr\/\u003e• Output voltage 220\/230 \/ 240V\u003cbr\/\u003e• Frequency 50 Hz or 60 Hz\u003cbr\/\u003e• ECO mode enable \/ disable sensitivity setting (setting the level when the drive \"sleeps\" and when it \"wakes up\" again)\u003cbr\/\u003e \u003cbr\/\u003eMonitoring is also available:\u003cbr\/\u003e• input and output voltage and current, temperature, alarms\u003cbr\/\u003e \u003cbr\/\u003eHigh starting power\u003cbr\/\u003eNeeded to start loads such as power converters for LED lamps, halogen lamps or power tools.\u003cbr\/\u003e \u003cbr\/\u003eECO mode\u003cbr\/\u003eIn ECO mode - when the load power drops below the preset value, the inverter switches to standby mode (it sleeps and the inverter's own consumption is then only about 1W). In standby mode with very low self-consumption, the inverter will then switch on regularly for a short time (adjustable parameter, default: every 2.5 seconds). If the load power exceeds the preset value, the inverter switches on again. Thanks to this function, you save a large amount of energy that the inverter would otherwise consume for its operation.\u003cbr\/\u003e \u003cbr\/\u003eVE.Direct communication port that can be connected to:\u003cbr\/\u003e \u003cbr\/\u003e• Computers (VE.Direct to USB cable required)\u003cbr\/\u003e• Apple and Android smartphones, MacBooks and other devices (VE.Direct Bluetooth dongle required)\u003cbr\/\u003e \u003cbr\/\u003eFree software\u003cbr\/\u003eCurrent SW versions are available here https:\/\/www.victronenergy.com\/support-and-downloads\/software#victronconnect-app\u003cbr\/\u003e \u003cbr\/\u003eRemote on \/ off, LED diagnostics - see manual.\u003cbr\/\u003e \u003cbr\/\u003eCables for connection to the battery are not included, we will be happy to make the necessary lengths for you. So do not hesitate to contact us.\u003cbr\/\u003e\u003cbr\/\u003eTechnical parameters:\u003cbr\/\u003eContinuous output power at 25 ° C (VA): 375\u003cbr\/\u003eContinuous active power at 25 ° C \/ 40 ° C (W): 300\/250\u003cbr\/\u003ePeak active power (W): 700\u003cbr\/\u003eWeight (kg): 3.0\u003cbr\/\u003eDimensions h x w x d (mm): 86x165x260\u003cbr\/\u003e\u003cbr\/\u003eTechnical specifications can be found in the downloadable documents below","brand":"VICTRON ENERGY","offers":[{"title":"Default Title","offer_id":52553895182674,"sku":"04230477","price":3090.0,"currency_code":"CZK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0954\/9624\/1490\/files\/04230477_8e262785-cc1c-4964-8712-39358113e18d.png?v=1776146103"},{"product_id":"menic-napeti-victron-energy-250va-12v-ve-direct","title":"Voltage converter Victron Energy 250VA 12V VE.Direct","description":"The drive features a rugged toroidal transformer that has proven its reliability in Victron Energy drives for many years.\u003cbr\/\u003eThe inverters are short - circuit proof and protected against overheating, whether due to overload or overload\u003cbr\/\u003ehigh ambient temperatures.\u003cbr\/\u003e \u003cbr\/\u003eThis inverter is fully configurable - it is a completely unique function, where you can set the following parameters using a PC:\u003cbr\/\u003e• Low and high battery alarm and reset level\u003cbr\/\u003e• Inverter shutdown level at low and high battery voltage and reset level\u003cbr\/\u003e• Output voltage 220\/230 \/ 240V\u003cbr\/\u003e• Frequency 50 Hz or 60 Hz\u003cbr\/\u003e• ECO mode enable \/ disable sensitivity setting (setting the level when the drive \"sleeps\" and when it \"wakes up\" again)\u003cbr\/\u003e \u003cbr\/\u003eMonitoring is also available:\u003cbr\/\u003e• input and output voltage and current, temperature, alarms\u003cbr\/\u003e \u003cbr\/\u003eHigh starting power\u003cbr\/\u003eNeeded to start loads such as power converters for LED lamps, halogen lamps or power tools.\u003cbr\/\u003e \u003cbr\/\u003eECO mode\u003cbr\/\u003eIn ECO mode - when the load power drops below the preset value, the inverter switches to standby mode (it sleeps and the inverter's own consumption is then only about 1W). In standby mode with very low self-consumption, the inverter will then switch on regularly for a short time (adjustable parameter, default: every 2.5 seconds). If the load power exceeds the preset value, the inverter switches on again. Thanks to this function, you save a large amount of energy that the inverter would otherwise consume for its operation.\u003cbr\/\u003e \u003cbr\/\u003eVE.Direct communication port that can be connected to:\u003cbr\/\u003e \u003cbr\/\u003e• Computers (VE.Direct to USB cable required)\u003cbr\/\u003e• Apple and Android smartphones, MacBooks and other devices (VE.Direct Bluetooth dongle required)\u003cbr\/\u003e \u003cbr\/\u003eFree software\u003cbr\/\u003eCurrent SW versions are available on our software page\u003cbr\/\u003e \u003cbr\/\u003eRemote on \/ off, LED diagnostics - see manual.\u003cbr\/\u003e \u003cbr\/\u003eCables for connection to the battery are not included, we will be happy to make the necessary lengths for you. So do not hesitate to contact us.\u003cbr\/\u003e\u003cbr\/\u003eTechnical parameters:\u003cbr\/\u003eContinuous output power at 25 ° C (VA): 250\u003cbr\/\u003eContinuous active power at 25 ° C \/ 40 ° C (W): 200\/150\u003cbr\/\u003ePeak active power (W): 350\u003cbr\/\u003eWeight (kg): 2.4\u003cbr\/\u003eDimensions h x w x d (mm): 86x165x260\u003cbr\/\u003e\u003cbr\/\u003eTechnical specifications can be found in the downloadable documents below","brand":"VICTRON ENERGY","offers":[{"title":"Default Title","offer_id":52553957343570,"sku":"04230474","price":2290.0,"currency_code":"CZK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0954\/9624\/1490\/files\/04230474_3d84db5e-9a2c-4aa5-b1fa-25c1982badb0.png?v=1776146100"},{"product_id":"menic-napeti-victron-energy-800va-12v-ve-direct","title":"Voltage converter Victron Energy 800VA 12V VE.Direct","description":"The drive features a rugged toroidal transformer that has proven its reliability in Victron Energy drives for many years.\u003cbr\/\u003eThe inverters are short - circuit proof and protected against overheating, whether due to overload or overload\u003cbr\/\u003ehigh ambient temperatures.\u003cbr\/\u003e \u003cbr\/\u003eThis inverter is fully configurable - it is a completely unique function, where you can set the following parameters using a PC:\u003cbr\/\u003e• Low and high battery alarm and reset level\u003cbr\/\u003e• Inverter shutdown level at low and high battery voltage and reset level\u003cbr\/\u003e• Output voltage 220\/230 \/ 240V\u003cbr\/\u003e• Frequency 50 Hz or 60 Hz\u003cbr\/\u003e• ECO mode enable \/ disable sensitivity setting (setting the level when the drive \"sleeps\" and when it \"wakes up\" again)\u003cbr\/\u003e \u003cbr\/\u003eMonitoring is also available:\u003cbr\/\u003e• input and output voltage and current, temperature, alarms\u003cbr\/\u003e \u003cbr\/\u003eHigh starting power\u003cbr\/\u003eNeeded to start loads such as power converters for LED lamps, halogen lamps or power tools.\u003cbr\/\u003e \u003cbr\/\u003eECO mode\u003cbr\/\u003eIn ECO mode - when the load power drops below the preset value, the inverter switches to standby mode (it sleeps and the inverter's own consumption is then only about 1W). In standby mode with very low self-consumption, the inverter will then switch on regularly for a short time (adjustable parameter, default: every 2.5 seconds). If the load power exceeds the preset value, the inverter switches on again. Thanks to this function, you save a large amount of energy that the inverter would otherwise consume for its operation.\u003cbr\/\u003e \u003cbr\/\u003eVE.Direct communication port that can be connected to:\u003cbr\/\u003e \u003cbr\/\u003e• Computers (VE.Direct to USB cable required)\u003cbr\/\u003e• Apple and Android smartphones, MacBooks and other devices (VE.Direct Bluetooth dongle required)\u003cbr\/\u003e \u003cbr\/\u003eFree software\u003cbr\/\u003eCurrent SW versions are available here https:\/\/www.victronenergy.com\/support-and-downloads\/software#victronconnect-app\u003cbr\/\u003e \u003cbr\/\u003eRemote on \/ off, LED diagnostics - see manual.\u003cbr\/\u003e \u003cbr\/\u003eCables for connection to the battery are not included, we will be happy to make the necessary lengths for you. So do not hesitate to contact us.\u003cbr\/\u003e\u003cbr\/\u003eTechnical parameters:\u003cbr\/\u003eContinuous output power at 25 ° C (VA): 800\u003cbr\/\u003eContinuous active power at 25 ° C \/ 40 ° C (W): 650\/560\u003cbr\/\u003ePeak active power (W): 1500\u003cbr\/\u003eWeight (kg): 5.5\u003cbr\/\u003eDimensions h x w x d (mm): 105x230x325\u003cbr\/\u003e\u003cbr\/\u003eTechnical specifications can be found in the downloadable documents below","brand":"VICTRON ENERGY","offers":[{"title":"Default Title","offer_id":52553957441874,"sku":"04230480","price":5880.0,"currency_code":"CZK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0954\/9624\/1490\/files\/04230480_488f2e92-9fe5-478f-86b7-c6aa4bcfcaa1.png?v=1776146105"},{"product_id":"menic-napeti-victron-energy-500va-24v-ve-direct","title":"Voltage converter Victron Energy 500VA 24V VE.Direct","description":"The drive features a rugged toroidal transformer that has proven its reliability in Victron Energy drives for many years.\u003cbr\/\u003eThe inverters are short - circuit proof and protected against overheating, whether due to overload or overload\u003cbr\/\u003ehigh ambient temperatures.\u003cbr\/\u003e \u003cbr\/\u003eThis inverter is fully configurable - it is a completely unique function, where you can set the following parameters using a PC:\u003cbr\/\u003e• Low and high battery alarm and reset level\u003cbr\/\u003e• Inverter shutdown level at low and high battery voltage and reset level\u003cbr\/\u003e• Output voltage 220\/230 \/ 240V\u003cbr\/\u003e• Frequency 50 Hz or 60 Hz\u003cbr\/\u003e• ECO mode enable \/ disable sensitivity setting (setting the level when the drive \"sleeps\" and when it \"wakes up\" again)\u003cbr\/\u003e \u003cbr\/\u003eMonitoring is also available:\u003cbr\/\u003e• input and output voltage and current, temperature, alarms\u003cbr\/\u003e \u003cbr\/\u003eHigh starting power\u003cbr\/\u003eNeeded to start loads such as power converters for LED lamps, halogen lamps or power tools.\u003cbr\/\u003e \u003cbr\/\u003eECO mode\u003cbr\/\u003eIn ECO mode - when the load power drops below the preset value, the inverter switches to standby mode (it sleeps and the inverter's own consumption is then only about 1W). In standby mode with very low self-consumption, the inverter will then switch on regularly for a short time (adjustable parameter, default: every 2.5 seconds). If the load power exceeds the preset value, the inverter switches on again. Thanks to this function, you save a large amount of energy that the inverter would otherwise consume for its operation.\u003cbr\/\u003e \u003cbr\/\u003eVE.Direct communication port that can be connected to:\u003cbr\/\u003e \u003cbr\/\u003e• Computers (VE.Direct to USB cable required)\u003cbr\/\u003e• Apple and Android smartphones, MacBooks and other devices (VE.Direct Bluetooth dongle required)\u003cbr\/\u003e \u003cbr\/\u003eFree software\u003cbr\/\u003eCurrent SW versions are available here https:\/\/www.victronenergy.com\/support-and-downloads\/software#victronconnect-app\u003cbr\/\u003e \u003cbr\/\u003eRemote on \/ off, LED diagnostics - see manual.\u003cbr\/\u003e \u003cbr\/\u003eCables for connection to the battery are not included, we will be happy to make the necessary lengths for you. So do not hesitate to contact us.\u003cbr\/\u003e\u003cbr\/\u003eTechnical parameters:\u003cbr\/\u003eContinuous output power at 25 ° C (VA): 500\u003cbr\/\u003eContinuous active power at 25 ° C \/ 40 ° C (W): 400\/350\u003cbr\/\u003ePeak active power (W): 900\u003cbr\/\u003eWeight (kg): 3.9\u003cbr\/\u003eDimensions h x w x d (mm): 86x172x275\u003cbr\/\u003e\u003cbr\/\u003eTechnical specifications can be found in the downloadable documents below","brand":"VICTRON ENERGY","offers":[{"title":"Default Title","offer_id":52554035298642,"sku":"04230479","price":3880.0,"currency_code":"CZK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0954\/9624\/1490\/files\/04230479_f71d8078-2a21-4c52-8b5e-6035631708e5.png?v=1776146105"},{"product_id":"pc-rozhrani-ve-direct-usb","title":"PC interface VE.Direct-USB","description":"The VE.Direct-USB interface is used to connect a computer with Victron devices with the VE.Direct communication protocol. These are mainly Blue MPolar 75\/15, 100\/15 and 75\/50 solar MPPT controllers and the BMV700, BMV702 and BMV700H battery status monitor.\u003cbr\/\u003e \u003cbr\/\u003eThe VE Power Setup program and its driver are required to update the firmware. Everything is free to download at www.victronenergy.com in the Support \u0026 Downloads \/ Software section.\u003cbr\/\u003e \u003cbr\/\u003eTechnical parameters\u003cbr\/\u003e \u003cbr\/\u003eLength: 1 m\u003cbr\/\u003eBlack colour","brand":"VICTRON ENERGY","offers":[{"title":"Default Title","offer_id":52554108567890,"sku":"04290048","price":772.0,"currency_code":"CZK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0954\/9624\/1490\/files\/04290048.png?v=1776146417"},{"product_id":"menic-napeti-victron-energy-375va-12v-ve-direct","title":"Voltage converter Victron Energy 375VA 12V VE.Direct","description":"The drive features a rugged toroidal transformer that has proven its reliability in Victron Energy drives for many years.\u003cbr\/\u003eThe inverters are short - circuit proof and protected against overheating, whether due to overload or overload\u003cbr\/\u003ehigh ambient temperatures.\u003cbr\/\u003e \u003cbr\/\u003eThis inverter is fully configurable - it is a completely unique function, where you can set the following parameters using a PC:\u003cbr\/\u003e• Low and high battery alarm and reset level\u003cbr\/\u003e• Inverter shutdown level at low and high battery voltage and reset level\u003cbr\/\u003e• Output voltage 220\/230 \/ 240V\u003cbr\/\u003e• Frequency 50 Hz or 60 Hz\u003cbr\/\u003e• ECO mode enable \/ disable sensitivity setting (setting the level when the drive \"sleeps\" and when it \"wakes up\" again)\u003cbr\/\u003e \u003cbr\/\u003eMonitoring is also available:\u003cbr\/\u003e• input and output voltage and current, temperature, alarms\u003cbr\/\u003e \u003cbr\/\u003eHigh starting power\u003cbr\/\u003eNeeded to start loads such as power converters for LED lamps, halogen lamps or power tools.\u003cbr\/\u003e \u003cbr\/\u003eECO mode\u003cbr\/\u003eIn ECO mode - when the load power drops below the preset value, the inverter switches to standby mode (it sleeps and the inverter's own consumption is then only about 1W). In standby mode with very low self-consumption, the inverter will then switch on regularly for a short time (adjustable parameter, default: every 2.5 seconds). If the load power exceeds the preset value, the inverter switches on again. Thanks to this function, you save a large amount of energy that the inverter would otherwise consume for its operation.\u003cbr\/\u003e \u003cbr\/\u003eVE.Direct communication port that can be connected to:\u003cbr\/\u003e \u003cbr\/\u003e• Computers (VE.Direct to USB cable required)\u003cbr\/\u003e• Apple and Android smartphones, MacBooks and other devices (VE.Direct Bluetooth dongle required)\u003cbr\/\u003e \u003cbr\/\u003eFree software\u003cbr\/\u003eCurrent SW versions are available on our software page\u003cbr\/\u003e \u003cbr\/\u003eRemote on \/ off, LED diagnostics - see manual.\u003cbr\/\u003e \u003cbr\/\u003eCables for connection to the battery are not included, we will be happy to make the necessary lengths for you. So do not hesitate to contact us.\u003cbr\/\u003e\u003cbr\/\u003eTechnical parameters:\u003cbr\/\u003eContinuous output power at 25 ° C (VA): 375\u003cbr\/\u003eContinuous active power at 25 ° C \/ 40 ° C (W): 300\/250\u003cbr\/\u003ePeak active power (W): 700\u003cbr\/\u003eWeight (kg): 3.0\u003cbr\/\u003eDimensions h x w x d (mm): 86x165x260\u003cbr\/\u003e\u003cbr\/\u003eTechnical specifications can be found in the downloadable documents below","brand":"VICTRON ENERGY","offers":[{"title":"Default Title","offer_id":52554434249042,"sku":"04230475","price":2790.0,"currency_code":"CZK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0954\/9624\/1490\/files\/04230475_926f9754-4f85-49b8-860d-63b69b1f7139.png?v=1776146101"},{"product_id":"stridac-hybridni-10kw-sofar-hyd10ktl-3ph","title":"SOFARSOLAR HYD10KTL-3PH 10kW hybrid inverter","description":"A SOFARSOLAR HYD 10KTL-3PH egy kompakt, 3 fázisú hibrid inverter integrált MPPT vezérlővel és aszimmetrikus kimenettel. Alkalmas szigetüzemű, hálózati csatlakozás nélküli telepítésekhez is, vagy tipikus hálózaton lévő inverterként is használható. A névleges teljesítményének akár 200%-át elérő rövid távú túlterhelést is kibírja, és ezeket a csúcsokat a csatlakoztatott akkumulátorrendszerből származó energiával egészíti ki. Ugyanakkor képes csökkenteni vagy teljesen kiküszöbölni az elosztóhálózatba történő visszavezetéseket. Hálózati áramkimaradás esetén az inverter kevesebb mint 10 milliszekundum alatt automatikusan szünetmentes áramellátási (UPS) üzemmódba kapcsol, így a normál készülékeket nem érinti a kapcsolási késleltetés.\u003cbr\/\u003e\u003cbr\/\u003eAz inverter teljes mértékben megfelel az Új Zöld Takarékossági Támogatási Program (2021-2030) követelményeinek.\u003cbr\/\u003eSVT-kód SVT30833\u003cbr\/\u003e\u003cbr\/\u003eAz akkumulátoros rendszert külön kell megvásárolni!\u003cbr\/\u003eSofar GTX vagy BTS sorozatú akkumulátorok használata ajánlott, lásd a termék tartozékait.\u003cbr\/\u003e\u003cbr\/\u003e\u003cbr\/\u003eTermékparaméterek:\u003cbr\/\u003e\u003cbr\/\u003e- SVT tanúsítás\u003cbr\/\u003e- 3 fázisú, 10kW-os kimenet aszimmetrikus kimenettel\u003cbr\/\u003e- akár 10 párhuzamos egység csatlakoztatását teszi lehetővé a teljesítmény növelése érdekében\u003cbr\/\u003e- MPPT-vezérlő két bemenettel a rugalmasabb kábelezéshez\u003cbr\/\u003e- aktív APF-szűrő a kimeneten a jobb teljesítményminőség érdekében\u003cbr\/\u003e- állítható üzemmódok magas napenergia-hozam mellett\u003cbr\/\u003e- Teljesen digitális és pontos vezérlés beépített kijelzővel\u003cbr\/\u003e- A hálózaton kívüli kimenet nem kiegyensúlyozott terheléshez csatlakoztatható, háromfázisú önálló kimenet támogatott\u003cbr\/\u003e- WiFi és okosmérő mellékelve\u003cbr\/\u003e\u003cbr\/\u003e\u003cbr\/\u003eSpecifikációk:\u003cbr\/\u003e\u003cbr\/\u003e- Li-Ion akkumulátor támogatott.\u003cbr\/\u003e- Akkumulátor feszültség: 180-800 V\u003cbr\/\u003e- max. töltési\/kisütési áram: 50A\u003cbr\/\u003e- Csúcstöltési\/kisütési áram: 70A@60mp.\u003cbr\/\u003e- CAN kommunikációs interfész (RS 485)\u003cbr\/\u003e\u003cbr\/\u003eVédelmi rendszerek:\u003cbr\/\u003e- DC leválasztó: igen\u003cbr\/\u003e- AC áramvédő: igen\u003cbr\/\u003e- PV fordított polaritás elleni védelem: igen\u003cbr\/\u003e- akkumulátor fordított polaritás elleni védelem: igen\u003cbr\/\u003e- túláramvédelem: igen\u003cbr\/\u003e- túlfeszültség elleni védelem: igen, II. osztályú\u003cbr\/\u003e- hálózati túláram elleni védelem: igen\u003cbr\/\u003e- szigetelésgátló funkció: igen\u003cbr\/\u003e\u003cbr\/\u003eMPPT-vezérlő paraméterei:\u003cbr\/\u003e- A PV-bemenetek száma (trackerek): 2\u003cbr\/\u003e- ajánlott maximális PV-teljesítmény: 2×7500Wp\u003cbr\/\u003e- max. Egyenfeszültség (Voc): 1000V\u003cbr\/\u003e- MPPT szabályozási tartomány: 180 és 960V között\u003cbr\/\u003e- MPPT teljes terhelési tartomány: 220 és 850V között\u003cbr\/\u003e- Indítási (min.) feszültség: 200V\u003cbr\/\u003e- max. bemeneti áram: 25A (minden bemenetre)\u003cbr\/\u003e\u003cbr\/\u003eAC paraméterek (hálózati csatlakozás):\u003cbr\/\u003e- Névleges teljesítmény: 10kW\u003cbr\/\u003e- 3L\/N\/PE névleges feszültség: 220\/380VAC és 230\/400VAC között\u003cbr\/\u003e- max. AC kimeneti teljesítmény a hálózatra: 11kW\u003cbr\/\u003e- max. 20kW\u003cbr\/\u003e- max. AC kimeneti áram a hálózatra: 16A\u003cbr\/\u003e- max. bemeneti váltakozó áram az elosztóhálózatból: 29A\u003cbr\/\u003e\u003cbr\/\u003eAC kimeneti tartalék paraméterek:\u003cbr\/\u003e- Névleges teljesítmény: 10kW\u003cbr\/\u003e- maximális teljesítmény: 11 kW\u003cbr\/\u003e- csúcsteljesítmény: 20kVA (60 sec.)\u003cbr\/\u003e- max. kimeneti áram: 16A\u003cbr\/\u003e- Kimeneti csúcsáram: 30A (60 sec.)\u003cbr\/\u003e- 3L\/N\/PE névleges feszültség: 220\/380VAC és 230\/400VAC között\u003cbr\/\u003e- kapcsolási idő: \u003c 15 ms\u003cbr\/\u003e\u003cbr\/\u003eÁltalános paraméterek:\u003cbr\/\u003e- Méretek: 571×515×264 mm\u003cbr\/\u003e- súly: 37 kg\u003cbr\/\u003e- kialakítás: transzformátor nélkül\u003cbr\/\u003e- készenléti energiafogyasztás: \u003c15W\u003cbr\/\u003e- zajszint: \u003c45dB\u003cbr\/\u003e- Hűtés: aktív\u003cbr\/\u003e- Védelem: IP65\u003cbr\/\u003e- Interfész: LCD kijelző + WiFi\u003cbr\/\u003e- Garancia: 5 év\u003cbr\/\u003e\u003cbr\/\u003eTermékvideó:\u003cbr\/\u003ehttps:\/\/www.youtube.com\/watch?v=0UrV-QgDynI\u0026t=591s\u0026ab_channel=SofarSolarEU\u003cbr\/\u003e\u003cbr\/\u003eKód SS10kW\u003cbr\/\u003e","brand":"SOFARSOLAR","offers":[{"title":"Default Title","offer_id":52554535371090,"sku":"04230527","price":44900.0,"currency_code":"CZK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0954\/9624\/1490\/files\/04230527.png?v=1769259374"},{"product_id":"menic-napeti-victron-energy-500va-12v-ve-direct","title":"Voltage converter Victron Energy 500VA 12V VE.Direct","description":"The drive features a rugged toroidal transformer that has proven its reliability in Victron Energy drives for many years.\u003cbr\/\u003eThe inverters are short - circuit proof and protected against overheating, whether due to overload or overload\u003cbr\/\u003ehigh ambient temperatures.\u003cbr\/\u003e \u003cbr\/\u003eThis inverter is fully configurable - it is a completely unique function, where you can set the following parameters using a PC:\u003cbr\/\u003e• Low and high battery alarm and reset level\u003cbr\/\u003e• Inverter shutdown level at low and high battery voltage and reset level\u003cbr\/\u003e• Output voltage 220\/230 \/ 240V\u003cbr\/\u003e• Frequency 50 Hz or 60 Hz\u003cbr\/\u003e• ECO mode enable \/ disable sensitivity setting (setting the level when the drive \"sleeps\" and when it \"wakes up\" again)\u003cbr\/\u003e \u003cbr\/\u003eMonitoring is also available:\u003cbr\/\u003e• input and output voltage and current, temperature, alarms\u003cbr\/\u003e \u003cbr\/\u003eHigh starting power\u003cbr\/\u003eNeeded to start loads such as power converters for LED lamps, halogen lamps or power tools.\u003cbr\/\u003e \u003cbr\/\u003eECO mode\u003cbr\/\u003eIn ECO mode - when the load power drops below the preset value, the inverter switches to standby mode (it sleeps and the inverter's own consumption is then only about 1W). In standby mode with very low self-consumption, the inverter will then switch on regularly for a short time (adjustable parameter, default: every 2.5 seconds). If the load power exceeds the preset value, the inverter switches on again. Thanks to this function, you save a large amount of energy that the inverter would otherwise consume for its operation.\u003cbr\/\u003e \u003cbr\/\u003eVE.Direct communication port that can be connected to:\u003cbr\/\u003e \u003cbr\/\u003e• Computers (VE.Direct to USB cable required)\u003cbr\/\u003e• Apple and Android smartphones, MacBooks and other devices (VE.Direct Bluetooth dongle required)\u003cbr\/\u003e \u003cbr\/\u003eFree software\u003cbr\/\u003eCurrent SW versions are available here https:\/\/www.victronenergy.com\/support-and-downloads\/software#victronconnect-app\u003cbr\/\u003e \u003cbr\/\u003eRemote on \/ off, LED diagnostics - see manual.\u003cbr\/\u003e \u003cbr\/\u003eCables for connection to the battery are not included, we will be happy to make the necessary lengths for you. So do not hesitate to contact us.\u003cbr\/\u003e\u003cbr\/\u003eTechnical parameters:\u003cbr\/\u003eContinuous output power at 25 ° C (VA): 500\u003cbr\/\u003eContinuous active power at 25 ° C \/ 40 ° C (W): 400\/350\u003cbr\/\u003ePeak active power (W): 900\u003cbr\/\u003eWeight (kg): 3.9\u003cbr\/\u003eDimensions h x w x d (mm): 86x172x275\u003cbr\/\u003e\u003cbr\/\u003eTechnical specifications can be found in the downloadable documents below","brand":"VICTRON ENERGY","offers":[{"title":"Default Title","offer_id":52554842243410,"sku":"04230478","price":3490.0,"currency_code":"CZK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0954\/9624\/1490\/files\/04230478_29b078c7-810a-4e43-a29d-472b5013ed09.png?v=1776146104"},{"product_id":"menic-napeti-victron-energy-250va-24v-ve-direct","title":"Voltage converter Victron Energy 250VA 24V VE.Direct","description":"The drive features a rugged toroidal transformer that has proven its reliability in Victron Energy drives for many years.\u003cbr\/\u003eThe inverters are short - circuit proof and protected against overheating, whether due to overload or overload\u003cbr\/\u003ehigh ambient temperatures.\u003cbr\/\u003e \u003cbr\/\u003eThis inverter is fully configurable - it is a completely unique function, where you can set the following parameters using a PC:\u003cbr\/\u003e• Low and high battery alarm and reset level\u003cbr\/\u003e• Inverter shutdown level at low and high battery voltage and reset level\u003cbr\/\u003e• Output voltage 220\/230 \/ 240V\u003cbr\/\u003e• Frequency 50 Hz or 60 Hz\u003cbr\/\u003e• ECO mode enable \/ disable sensitivity setting (setting the level when the drive \"sleeps\" and when it \"wakes up\" again)\u003cbr\/\u003e \u003cbr\/\u003eMonitoring is also available:\u003cbr\/\u003e• input and output voltage and current, temperature, alarms\u003cbr\/\u003e \u003cbr\/\u003eHigh starting power\u003cbr\/\u003eNeeded to start loads such as power converters for LED lamps, halogen lamps or power tools.\u003cbr\/\u003e \u003cbr\/\u003eECO mode\u003cbr\/\u003eIn ECO mode - when the load power drops below the preset value, the inverter switches to standby mode (it sleeps and the inverter's own consumption is then only about 1W). In standby mode with very low self-consumption, the inverter will then switch on regularly for a short time (adjustable parameter, default: every 2.5 seconds). If the load power exceeds the preset value, the inverter switches on again. Thanks to this function, you save a large amount of energy that the inverter would otherwise consume for its operation.\u003cbr\/\u003e \u003cbr\/\u003eVE.Direct communication port that can be connected to:\u003cbr\/\u003e \u003cbr\/\u003e• Computers (VE.Direct to USB cable required)\u003cbr\/\u003e• Apple and Android smartphones, MacBooks and other devices (VE.Direct Bluetooth dongle required)\u003cbr\/\u003e \u003cbr\/\u003eFree software\u003cbr\/\u003eCurrent SW versions are available here https:\/\/www.victronenergy.com\/support-and-downloads\/software#victronconnect-app\u003cbr\/\u003e \u003cbr\/\u003eRemote on \/ off, LED diagnostics - see manual.\u003cbr\/\u003e \u003cbr\/\u003eCables for connection to the battery are not included, we will be happy to make the necessary lengths for you. So do not hesitate to contact us.\u003cbr\/\u003e\u003cbr\/\u003eTechnical parameters:\u003cbr\/\u003eContinuous output power at 25 ° C (VA): 250\u003cbr\/\u003eContinuous active power at 25 ° C \/ 40 ° C (W): 200\/150\u003cbr\/\u003ePeak active power (W): 350\u003cbr\/\u003eWeight (kg): 2.4\u003cbr\/\u003eDimensions h x w x d (mm): 86x165x260\u003cbr\/\u003e\u003cbr\/\u003eTechnical specifications can be found in the downloadable documents below","brand":"VICTRON ENERGY","offers":[{"title":"Default Title","offer_id":52555111596370,"sku":"04230476","price":2150.0,"currency_code":"CZK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0954\/9624\/1490\/files\/04230476_c031b23a-5099-4922-9db0-8bc3b71f9994.png?v=1776146102"},{"product_id":"menic-napeti-sinus-victron-energy-ve-direct-500va-48v","title":"Voltage converter SINUS Victron Energy VE.Direct 500VA 48V","description":"Professional programmable voltage converter 48V\/500VA with toroidal transformer, with ECO mode and VE.Direct interface. \u003cbr\/\u003e\u003cbr\/\u003eThe drive incorporates a robust toroidal transformer which has proven its reliability in Victron Energy drives for many years.\u003cbr\/\u003eInverters are short-circuit proof and protected against overheating, either due to overload or\u003cbr\/\u003ehigh ambient temperatures.\u003cbr\/\u003e \u003cbr\/\u003eThis converter is fully configurable - this is a completely unique function, where you can set the following parameters using a PC:\u003cbr\/\u003e• low and high battery voltage alarm and reset level\u003cbr\/\u003e• inverter shutdown level at low and high battery voltage and reset level\u003cbr\/\u003e• Output voltage 220\/230\/240V\u003cbr\/\u003e• Frequency 50 Hz or 60 Hz\u003cbr\/\u003e• ECO mode on \/ off sensitivity settings (setting the level when the inverter \"sleeps\" and when it \"wakes up\" again)\u003cbr\/\u003e \u003cbr\/\u003eMonitoring is also available:\u003cbr\/\u003e• input and output voltage and current, temperature, alarms\u003cbr\/\u003e \u003cbr\/\u003eHigh starting power\u003cbr\/\u003eNeeded to start loads such as power converters for LED lamps, halogen lamps or power tools.\u003cbr\/\u003e\u003cbr\/\u003eECO mode\u003cbr\/\u003eIn ECO mode - when the load input drops below the preset value, the inverter switches to standby mode (it goes to sleep and the inverter's own consumption is then only approx. 1W). In standby mode with very low self-consumption, the inverter will then switch on periodically for a short time (adjustable parameter, default: every 2.5 seconds). If the load power exceeds the preset value, the inverter will turn on again. Thanks to this function, you will save a large amount of energy that the inverter would otherwise have used for its operation.\u003cbr\/\u003e \u003cbr\/\u003eVE.Direct communication port that can be connected to:\u003cbr\/\u003e \u003cbr\/\u003e• Computers (VE.Direct to USB cable required)\u003cbr\/\u003e• Apple and Android smartphones, MacBook tablets and other devices (necessary VE.Direct Bluetooth dongle)\u003cbr\/\u003e \u003cbr\/\u003eFree software\u003cbr\/\u003eCurrent SW versions are available on our software page\u003cbr\/\u003e \u003cbr\/\u003eRemote on\/off, LED diagnostics - see manual.\u003cbr\/\u003e \u003cbr\/\u003eCables for connecting to the battery are not included, we will be happy to advise you on the design of a suitable cable cross-section. So don't hesitate to contact us.\u003cbr\/\u003e\u003cbr\/\u003eTechnical parameters:\u003cbr\/\u003eContinuous output power at 25°C (VA): 500\u003cbr\/\u003eContinuous active power at 25°C \/ 40°C (W): 400\/350\u003cbr\/\u003ePeak active power (W): 900\u003cbr\/\u003eWeight (kg): 3.9\u003cbr\/\u003eDimensions h x w x d (mm): 86x172x275\u003cbr\/\u003e\u003cbr\/\u003eTechnical specifications can be found in the downloadable documents below","brand":"VICTRON ENERGY","offers":[{"title":"Default Title","offer_id":52556545163602,"sku":"04230543","price":3499.0,"currency_code":"CZK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0954\/9624\/1490\/files\/04230543_73e48501-45f8-4dff-8b10-00cf23257c30.png?v=1776147311"},{"product_id":"menic-napeti-smart-victron-energy-2000va-48v","title":"Voltage converter Smart Victron Energy 2000VA 48V","description":"The converter contains a robust toroidal transformer that has demonstrated its reliability in Victron Energy's transducers for many years. The transducers are short-resistant and protected against overheating, whether due to overload or high ambient temperatures. This changer has built-in Bluetooth technology and is fully configurable with a tablet or smartphone. This is a completely unique function and therefore you have the ability to set the parameters of the changer and monitor the operation simply wirelessly. It provides the performance needed to run loads such as power changers for LED lamps, halide lamps or power tools.\u003cbr\/\u003e\u003cbr\/\u003eSettings options: \u003cbr\/\u003e- low voltage battery alarm \u003cbr\/\u003e- voltage level setting for switching off and restarting the inverter when the battery is low \u003cbr\/\u003e- dynamic disconnection from the battery when discharged: voltage level for disconnection is dependent on the load size \u003cbr\/\u003e- output voltage: 210 - 245V \u003cbr\/\u003e- frequency: 50 Hz or 60 Hz \u003cbr\/\u003e- ECO on\/off mode and ECO sensing level \u003cbr\/\u003e- alarm relays \u003cbr\/\u003e\u003cbr\/\u003eTechnical parameters: \u003cbr\/\u003e- sustained output power at 25°C (VA): 2000 \u003cbr\/\u003e- continuous active power at 25 °C \/ 40 °C (W):1600\/1450 \u003cbr\/\u003e- peak active power (W): 4000 \u003cbr\/\u003e- weight (kg): 13 \u003cbr\/\u003e- dimensions in x w x h (mm): 485 x 219 x 125\u003cbr\/\u003e\u003cbr\/\u003eTechnical specifications can be found in the downloadable documents below","brand":"VICTRON ENERGY","offers":[{"title":"Default Title","offer_id":52556545327442,"sku":"04230546","price":11999.0,"currency_code":"CZK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0954\/9624\/1490\/files\/04230546_f19d6747-2689-4b7a-92da-52580cfb34a2.png?v=1776147311"},{"product_id":"hybridni-menic-napeti-mps-5500h-5-5kw-48v","title":"MPS-5500HP hybrid voltage converter, 5.5 kW\/48 V","description":"The device combines a pure sine wave inverter, a UPS and an MPPT controller for solar panels. It is therefore a backup power supply with backup from the mains or a generator, a battery charger and an MPPT solar controller; the backup priority can also be set in reverse, i.e. with priority given to the mains supply and backup from batteries or PV panels.\n\n\nProduct specifications:\u003cbr\/\u003e\u003cbr\/\u003e- system voltage 48V\n- pure sine wave inverter\n- battery charging current when operating from the mains: max. 40A, preset to 30A\n- charging current when operating from solar panels: max. 110A\u003cbr\/\u003e- adjustable priority: AC or BAT\n- compatible with generator or mains voltage; the inverter synchronises with the AC input\n- protection against overload, short circuit and battery discharge\n- automatic restart after overload\u003cbr\/\u003e- intelligent battery charger\n- compatible batteries: primarily any lead-acid batteries (AGM, AGM GEL)\n- for LiFePO4, the required parameters must be set in USE mode – for experienced users only\u003cbr\/\u003e- soft start for gradual load ramp-up\n- standby power consumption: 10W\n- solar panels with open-circuit voltage of 120–450V and maximum current of 20A (max. 6000W)\u003cbr\/\u003e\u003cbr\/\u003e\u003cbr\/\u003eNote:\n\n- Parallel or three-phase connections are not possible.\n- Minimum voltage from PV panels for trouble-free operation: 160 V.\u003cbr\/\u003e- Optimal voltage from PV panels for safe operation: 250–300 V\n- Maximum voltage from PV panels: 500 V – not recommended, particularly given the need to connect more than 10 panels in series. In such cases, strings are prone to outages due to shading of one of the panels connected in this way.\n\n- The values shown on the display are for guidance only and are relevant only when a load is connected.\u003cbr\/\u003e- The inverter is intended for use only in TN-S or TN-C-S networks, in accordance with currently applicable standards. Use in TN-C networks (two-wire, phase + working earth) may result in damage to or malfunction of the device.\u003cbr\/\u003e\u003cbr\/\u003eThis device may only be installed by an authorised person (certificate under Decree No. 50\/1978 Coll. and a photovoltaic systems electrician (26–014-H))\u003cbr\/\u003eIncorrect settings of the inverter’s parameters may result in damage to the inverter. Claims arising from incorrect settings cannot be accepted.","brand":"SOLARFAM","offers":[{"title":"Default Title","offer_id":52556761104722,"sku":"04230588","price":12900.0,"currency_code":"CZK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0954\/9624\/1490\/files\/04230588_3ee95c73-ee3f-492b-ad42-5baa0bbcc108.png?v=1776147343"},{"product_id":"menic-napeti-victron-energy-3000va-12v-smart","title":"Voltage converter Smart Victron Energy 3000VA 12V Smart","description":"Sinus plne programovateľný 12V\/3000VA prevodník so zabudovaným Bluetooth, bezdrôtové nastavenia a ekologický režim.\u003cbr\/\u003e\u003cbr\/\u003e- Vysoký počiatočný výkon:\u003cbr\/\u003eSila potrebná na spustenie záťaže, ako sú LED žiarovky, halogénové žiarovky alebo elektrické náradie. Invertor obsahuje robustný toroidný transformátor, ktorý už mnoho rokov preukázal svoju spoľahlivosť vo Victron Energy. Invertory sú odolné voči krátkym obvodom a chránené prehrievaním, buď v dôsledku preťaženia alebo vysokých okolitých teplôt.\u003cbr\/\u003e\u003cbr\/\u003e- Vstavaná technológia Bluetooth a Victron Connect:\u003cbr\/\u003eTento prevodník má postavenú technológiu Bluetooth a je plne konfigurovateľná pomocou tabletu alebo smartfónu. Toto je jedinečná funkcia a máte možnosť nastaviť parametre meniča a monitorovať operáciu jednoducho bezdrôtovo.\u003cbr\/\u003e \u003cbr\/\u003eMožnosti nastavenia:\u003cbr\/\u003eAlarm s nízkym napätím batérie\u003cbr\/\u003eNastavenie úrovne napätia na vypnutie a reštartovanie meniča pri vypustení batérie\u003cbr\/\u003eDynamické odpojenie od batérie pri výbore: úroveň napätia pre odpojenie závisí od veľkosti záťaže\u003cbr\/\u003eVýstupné napätie: 210 - 245V\u003cbr\/\u003eFrekvencia: 50 Hz alebo 60 Hz\u003cbr\/\u003eECO režim zapnuté \/ vypnuté a úroveň snímania ECO\u003cbr\/\u003eRelé alarmu\u003cbr\/\u003e \u003cbr\/\u003e- Monitorovanie:\u003cbr\/\u003eVstupné a výstupné napätie, úroveň zaťaženia a alarmy\u003cbr\/\u003e \u003cbr\/\u003eStiahnite si aplikáciu zadarmo pod názvom VictronConnect App v App Store alebo Google Play.\u003cbr\/\u003eAplikáciu je možné stiahnuť na tejto softvérovej stránke Victron Energy.\u003cbr\/\u003eAk uprednostňujete nastavenia a monitorovanie pomocou kábla a PC, menič je vybavený komunikačným portom V.Direct, ku ktorému sa môžete pripojiť pomocou kábla v.direct k USB\u003cbr\/\u003e \u003cbr\/\u003e- Eco režim:\u003cbr\/\u003eV režime ECO - Keď spotreba energie klesne pod predvolenú hodnotu, menič prepne do pohotovostného režimu (je spánkom a spotreba konvertora je potom iba asi 0,6 W). V pohotovostnom režime s veľmi nízkou spotrebou bude menič pravidelne prepínaný na krátky čas (nastaviteľný parameter, štandard: každých 2,5 sekundy). Ak napájanie zaťaženia prekročí vopred určenú hodnotu, menič sa znova zapne. Vďaka tejto funkcii ušetríte veľké množstvo energie, ktorú by menič inak spotreboval na svoju prevádzku.\u003cbr\/\u003e \u003cbr\/\u003e- diaľkové zapnutie \/ vypnutie:\u003cbr\/\u003eDiaľkový spínač zapnutí \/ vypnutia alebo relé je možné pripojiť k konektoru dvojpolu.\u003cbr\/\u003e\u003cbr\/\u003e\u003cbr\/\u003e\u003cbr\/\u003eTechnické parametre :\u003cbr\/\u003e- trvalý výstupný výkon pri 25 ° C (VA): 3000\u003cbr\/\u003e- trvalý aktívny výkon pri 25 ° C \/ 40 ° C (W): 2400\/2200\u003cbr\/\u003e- Najvyšší aktívny výkon (W): 6000\u003cbr\/\u003e- Hmotnosť (kg): 19\u003cbr\/\u003e- Rozmery v x w x h (mm): 533 x 285 x 150","brand":"VICTRON ENERGY","offers":[{"title":"Default Title","offer_id":52557099073874,"sku":"04230600","price":22390.0,"currency_code":"CZK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0954\/9624\/1490\/files\/04230600_fa1124a4-c51d-49be-b26d-d58e8be3b5e7.png?v=1776147546"},{"product_id":"stridac-hybridni-15kw-solax-x3-hybrid-15-0-d","title":"Hybrid inverter 15kW SolaX X3-HYBRID-15.0-D","description":"The new X-Hybrid three-phase inverter from SolaX is the latest realization of the leading range of hybrid inverters, offering a flexible and scalable solution for both domestic and commercial use with a standard 10-year warranty\u003cbr\/\u003e\u003cbr\/\u003eThree-phase inverter with 15,000 W battery backup.\u003cbr\/\u003e\u003cbr\/\u003e\u003cbr\/\u003eTechnical parameters:\u003cbr\/\u003e- manufacturer: SOLAX\u003cbr\/\u003e- model: X3-HYBRID-15.0-D\u003cbr\/\u003e- input PV power max.: 18,000 W\u003cbr\/\u003e- input PV voltage max: 1000 V\u003cbr\/\u003e- output power max.: 15,000 W\u003cbr\/\u003e- input current max.: 26 A\u003cbr\/\u003e- MPP voltage range: 180-950 V\u003cbr\/\u003e- MPP trackers: 2\u003cbr\/\u003e- DC disconnector: integrated\u003cbr\/\u003e- type of inverter: without transformer\u003cbr\/\u003e- connection 3f\u003cbr\/\u003e- inverter efficiency max.: 98%\u003cbr\/\u003e- dimensions: 503 x 503 x 199 mm\u003cbr\/\u003e- weight: 30 kg\u003cbr\/\u003e\u003cbr\/\u003epackaging: 1 pc","brand":"SOLAX","offers":[{"title":"Default Title","offer_id":52557117063506,"sku":"04230601","price":47069.0,"currency_code":"CZK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0954\/9624\/1490\/files\/04230601_631d1c75-3510-46fb-8a64-588dc38c1303.png?v=1776147638"},{"product_id":"hybridni-menic-napeti-volt-sinus-pro-ultra-2000-12-230v-1000-2000w-mppt-60a","title":"Hybrid voltage converter VOLT Sinus Pro Ultra 2000 12\/230V 1000\/2000W MPPT 60A","description":"The solar inverter SINUS PRO ULTRA 2000 is a device that combines several functions: inverter, solar charger and battery charger. The clear LCD display allows simple and intuitive control with buttons for settings such as: battery charging current, AC\/solar charger priority, acceptable input voltage depending on different applications.\u003cbr\/\u003e\u003cbr\/\u003ePure SINE\u003cbr\/\u003eConfigurable input voltage range for home appliances and computers using LCD settings\u003cbr\/\u003eConfigurable battery charging current depending on the application, thanks to the LCD display settings\u003cbr\/\u003eConfigurable AC\/Solar charging priority via LCD display settings\u003cbr\/\u003eCompatibility with mains voltage or generator power\u003cbr\/\u003eAutomatic restart after AC power is restored\u003cbr\/\u003eProtection against short circuit, overload and thermal protection\u003cbr\/\u003eThe modern design of the charger ensures optimal battery charging\u003cbr\/\u003eCold start function\u003cbr\/\u003eWhat devices power the SINUS PRO ULTRA 2000?\u003cbr\/\u003e\u003cbr\/\u003eRTV equipment, e.g. TVs, tuners, hi-fi, DVD\u003cbr\/\u003eHousehold appliances, e.g. refrigerators, microwave ovens, blenders, toasters\u003cbr\/\u003eOffice equipment such as printers, fax machines, computers, monitors\u003cbr\/\u003ePower tools, such as drills, grinders, angle grinders\u003cbr\/\u003ePumps, compressors\u003cbr\/\u003eWhat makes the SINUS PRO ULTRA 2000 power supply different from other devices?\u003cbr\/\u003eThe built-in SINUS converter generates a \"sine\" voltage at the output, the same as in the mains. As a result, it can power induction equipment (e.g. power tools, air compressors, air conditioners, refrigerators, freezers, etc.).\u003cbr\/\u003e\u003cbr\/\u003eTechnical parameters:\u003cbr\/\u003e\u003cbr\/\u003e- Total power (instantaneous): 2000 VA\u003cbr\/\u003e- Constant power: 1000W\u003cbr\/\u003e- Battery voltage: 12V DC\u003cbr\/\u003e- Vmp range from panels: 15VDC-105VDC\u003cbr\/\u003e- Maximum charging current from panel layout: Imp up to 60A\u003cbr\/\u003e- Input voltage range (mains supply): 170VAC-280VAC\u003cbr\/\u003e- Output voltage range (mains supply): 220VAC-240VAC\u003cbr\/\u003e- Maximum charging current from the mains: 10\/20A\u003cbr\/\u003e- Maximum charging current: 60A\u003cbr\/\u003e- Output voltage range (converter): 230 V ± 3%\u003cbr\/\u003e- Working temperature: 0-40 °C\u003cbr\/\u003e- Dimensions: 224 x 337 x 97 mm\u003cbr\/\u003e- Weight: 5 kg\u003cbr\/\u003e\u003cbr\/\u003eThis device may only be installed by an authorized person (certificate from Decree No. 50\/1978Coll. and electrician of photovoltaic systems (26–014-H)) Improper settings of the inverter can lead to its damage. Complaints due to incorrect settings cannot be accepted.","brand":"VOLT","offers":[{"title":"Default Title","offer_id":52557377012050,"sku":"04290287","price":6199.0,"currency_code":"CZK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0954\/9624\/1490\/files\/04290287_2bdb4fbf-cf9a-46bd-82c3-dc0e1ee7d9a7.png?v=1772698868"},{"product_id":"stridac-hybridni-10kw-geti-gf-i10h3-rozbaleno-poskozeny-obal","title":"Geti GF-I10H3 10kW hybrid inverter – unboxed – damaged packaging","description":"Az alacsony saját energiafogyasztással rendelkező modern inverter négyféle üzemmódot kínál: hibrid, szigetüzemű, UPS és kettős tarifa (tanúsítás nélkül). Egyesíti a hagyományos inverter funkcióit az akkumulátortárolók hatékony felhasználásának lehetőségével. Teljesen aszimmetrikus háromfázisú kimenetével lehetővé teszi a rugalmas energiagazdálkodást és a felesleges napenergia akkumulátorokban történő tárolását későbbi felhasználásra. Ez növeli az épület energiafüggetlenségét, és megbízható áramellátást biztosít még a közüzemi hálózat meghibásodása esetén is.\u003cbr\/\u003e\u003cbr\/\u003eA fő előnyök közé tartozik a hálózathoz való hibrid csatlakozás vagy a hálózat nélküli szigetüzem lehetősége, valamint a teljesen aszimmetrikus háromfázisú kimenet, amely az aktuális igényeknek megfelelő optimális energiaelosztást biztosít. Lehetővé teszi az energiatárolást akkumulátorokban a feleslegek hatékony felhasználása és a nagyobb megtakarítások érdekében. Rendelkezik tartalék kimenettel (Back-Up), amely hálózati hiba esetén és hálózaton kívüli üzemmódban biztosítja a kiválasztott készülékek áramellátását. Az inverter minimális önfogyasztással rendelkezik, és gyors és egyszerű telepítést tesz lehetővé a PV-panelek, az akkumulátorok és az elosztóhálózat egyszerű csatlakoztatásával.\u003cbr\/\u003e\u003cbr\/\u003eA készülék egyértelmű, működési statisztikát nyújtó kijelzővel van felszerelve. A működési mód részletesen konfigurálható, beleértve a teljesítmény és az akkumulátortöltés prioritásának (napenergia vagy hálózat) kiválasztását. A rendszer felügyelete egyszerű mobilalkalmazással vagy webes felülettel. Az inverter hang- és fényjelzéseket is ad a hibaállapotokra. A DRED port lehetővé teszi, hogy reagáljon egy másik eszköz, például egy HDO-kapcsoló által kért jelekre.\u003cbr\/\u003e\u003cbr\/\u003eMűszaki adatok:\u003cbr\/\u003e\u003cbr\/\u003eFotovoltaikus bemenet\u003cbr\/\u003e- maximális panelteljesítmény: 15000 W\u003cbr\/\u003e- max. panelfeszültség: 1000V DC\u003cbr\/\u003e- MPPT feszültségtartomány: 200 - 850V DC\u003cbr\/\u003e- max. áram szálanként: 13 A\u003cbr\/\u003e- bemeneti stringek száma: 2\u003cbr\/\u003e- MPPT-követők száma: 2\u003cbr\/\u003e\u003cbr\/\u003eAkkumulátor bemenet\u003cbr\/\u003e- Akkumulátor típusa: Li-Ion\u003cbr\/\u003e- Akkumulátor feszültségtartomány: 180 - 650V\u003cbr\/\u003e- Max. töltési\/kisütési áram: 25\/25A\u003cbr\/\u003e- Li-Ion akkumulátor töltésvezérlés: automatikus alkalmazkodás a BMS-hez\u003cbr\/\u003e\u003cbr\/\u003eAC kimenet\u003cbr\/\u003e- névleges teljesítmény: 10000 VA\u003cbr\/\u003e- Csúcsteljesítmény: 11000 VA\u003cbr\/\u003e- max. kimeneti áram: 17 A\u003cbr\/\u003e- kimeneti jellemző: 400V AC 50 Hz \/ 350V AC 60 Hz\u003cbr\/\u003e- Kimeneti frekvenciatartomány: 45 - 55 Hz (280 - 490V AC)\u003cbr\/\u003e- Teljesítménytényező: 0,8\u003cbr\/\u003e- felharmonikus tényező: \u003c 3%\u003cbr\/\u003e- hálózati típus: 3W\/N\/PE\u003cbr\/\u003e- Aszimmetrikus kimenet: 0 - 100%\u003cbr\/\u003e\u003cbr\/\u003eAC tartalék kimenet\u003cbr\/\u003e- max. csúcsteljesítmény: 10000 VA\u003cbr\/\u003e- névleges kimeneti feszültség: 400\/380 V AC\u003cbr\/\u003e- névleges kimeneti frekvencia: 50\/60 Hz\u003cbr\/\u003e- feszültségeltérés lineáris terhelésnél: \u003c 3%\u003cbr\/\u003e\u003cbr\/\u003eHatékonyság\u003cbr\/\u003e- Az inverter maximális hatásfoka: 98,2%\u003cbr\/\u003e- Európai hatásfok: 97,5%\u003cbr\/\u003e- MPPT vezérlő hatékonysága: 99,9%\u003cbr\/\u003e\u003cbr\/\u003eVédelem és biztonság\u003cbr\/\u003e- DC fordított polaritás: igen\u003cbr\/\u003e- DC megszakító: igen\u003cbr\/\u003e- DC\/AC túlfeszültségvédő (SPD): igen\u003cbr\/\u003e- Szivárgási áram érzékelése: igen\u003cbr\/\u003e- Szigetelési ellenállás érzékelése: igen\u003cbr\/\u003e- áramvédő: igen\u003cbr\/\u003e- Kimeneti rövidzárlatvédelem: igen\u003cbr\/\u003e- akkumulátor fordított polaritás elleni védelem: igen\u003cbr\/\u003e\u003cbr\/\u003eEgyéb paraméterek\u003cbr\/\u003e- méretek: 548 x 444 x 184 mm\u003cbr\/\u003e- súly: 27 kg\u003cbr\/\u003e- üzemi hőmérséklet-tartomány: -25 és +60°C között\u003cbr\/\u003e- védettségi fok: IP65\u003cbr\/\u003e- hűtés típusa: passzív légáramlás\u003cbr\/\u003e- kialakítás: transzformátor nélküli\u003cbr\/\u003e- kijelző: LDC\u003cbr\/\u003e- páratartalom: 0-95%\u003cbr\/\u003e- kommunikáció: GPRS \/ Wi-Fi\u003cbr\/\u003e- Kommunikáció a BMS-szel: CAN \/ RS485\u003cbr\/\u003e- kommunikáció a mérővel: RS485\u003cbr\/\u003e- DRED kommunikáció: RS485\u003cbr\/\u003e- Tanúsítás: CQC, VDE-AR-N4105, VDE0126-1-1-1, AS4777, IEC61727, IEC62116.","brand":"GETI","offers":[{"title":"Default Title","offer_id":52664436457810,"sku":"90329658","price":11990.0,"currency_code":"CZK","in_stock":true}]},{"product_id":"stridac-hybridni-deye-sun-20k-sg01hp3-eu-am2-20kw-3f-hv","title":"Hybrid inverter DEYE SUN-20K-SG01HP3-EU-AM2, 20kW, 3F, HV","description":"SUN 5\/6\/8\/10\/12\/15\/20\/25K-SG01HP3-EU-AM2 is a brand new series of three-phase hybrid inverters supporting 160-700V HV battery, ensuring higher system efficiency and lower waste heat production. Thanks to the compact, sophisticated design and first-class technologies, this series manages to increase the power of the PV system by up to 30% compared to the rated power of the inverter (DC\/AC ratio = 1.3). This eliminates the need to always choose a model with the same performance for the PV system, which brings savings in the cost of installation. It supports three-phase asymmetric output up to 150% for the widest possible application in various conditions. The color LCD display provides a user-friendly interface for both system overview and configuration (battery management, AC\/solar charging depending on different applications, etc.). The biggest advantage of this converter is the adjustable \"smart load\" input\/output where you can connect a generator, string converter, or heating cartridge for heating water. The options of this port offer you to use similar functions as the wattrouter.\u003cbr\/\u003e\u003cbr\/\u003e\u003cbr\/\u003eMain parameters\u003cbr\/\u003e\u003cbr\/\u003eHigh voltage design for higher efficiency\u003cbr\/\u003e3-phase asymmetrical output\u003cbr\/\u003eTwo MPPT trackers\u003cbr\/\u003eFour string inputs (8 connectors)\u003cbr\/\u003eWorking voltage MPPT 150 - 850V\u003cbr\/\u003eIntelligent monitoring platform\u003cbr\/\u003eUnique functions Smart Load, Grid peak shaving, phase balancing\u003cbr\/\u003ePossibility to connect up to 10 parallel units\u003cbr\/\u003e6 time windows for charging and discharging\u003cbr\/\u003e\u003cbr\/\u003eThis device is in the list of products of the New Green Savings program (SVT34925)\u003cbr\/\u003e\u003cbr\/\u003e\u003cbr\/\u003eTechnical parameters\u003cbr\/\u003e\u003cbr\/\u003eBattery\u003cbr\/\u003eBattery type: lithium-ion\u003cbr\/\u003eBattery voltage: 160 - 700 VDC\u003cbr\/\u003eMax. charging current: 37 A\u003cbr\/\u003eMax. discharge current: 37 A\u003cbr\/\u003eNumber of battery inputs: 1\u003cbr\/\u003e\u003cbr\/\u003ePV input\u003cbr\/\u003eMax. PV power: 26000 W\u003cbr\/\u003eMax. DC Voltage: 1000V\u003cbr\/\u003eStarting voltage: 180V\u003cbr\/\u003eMax. input short-circuit current: 39 + 39 A\u003cbr\/\u003eMax. input operating current: 26 + 26 A\u003cbr\/\u003e\u003cbr\/\u003eAC input \/ output\u003cbr\/\u003eRated active power: 20000 W\u003cbr\/\u003eRated reactive power: 22000 VA\u003cbr\/\u003eMax. overload: 1.5x rated power after 10s\u003cbr\/\u003eRated input \/ output current: 30.4 \/ 29 A\u003cbr\/\u003eMax. input \/ output current: 33.4 \/ 31.9 A\u003cbr\/\u003eMax. continuous through current (from mains to load): 80 A\u003cbr\/\u003eRated voltage: 220 \/ 380 V, 230 \/ 400 V\u003cbr\/\u003eConnection type: 3L + N + PE\u003cbr\/\u003eMains frequency: 45 to 65 Hz\u003cbr\/\u003e\u003cbr\/\u003eEfficiency\u003cbr\/\u003eMax. efficiency: 97.6%\u003cbr\/\u003eEURO efficiency: 97%\u003cbr\/\u003eMPPT efficiency: \u003e99%\u003cbr\/\u003e\u003cbr\/\u003eProtection function\u003cbr\/\u003eDC polarity reversal\u003cbr\/\u003eAC current overload\u003cbr\/\u003eAC overvoltage\u003cbr\/\u003eAC output short circuit\u003cbr\/\u003eDetection of the DC component on the AC output\u003cbr\/\u003eOvervoltage during a sharp drop in load\u003cbr\/\u003eLeakage current detection in PE\u003cbr\/\u003eArc interrupter\u003cbr\/\u003eMonitoring of the electrical network\u003cbr\/\u003eIsland isolation function\u003cbr\/\u003eEarth fault detection\u003cbr\/\u003eDC input switch\u003cbr\/\u003eDC terminal block resistance detection\u003cbr\/\u003eResidual Current Device (RCD)\u003cbr\/\u003eOverheating\u003cbr\/\u003ePower surges\u003cbr\/\u003eSurge Protection Class: Type II (AC), Type II (DC)\u003cbr\/\u003e\u003cbr\/\u003eOther parameters\u003cbr\/\u003eWorking temperature: -40°C to +60°C\u003cbr\/\u003eAir humidity: 0 - 100%\u003cbr\/\u003eMax. altitude: 2000 m\u003cbr\/\u003eNoise level: ? 55 dB\u003cbr\/\u003eCooling: active intelligently controlled\u003cbr\/\u003eTopology: non-isolated\u003cbr\/\u003eNetwork standards: IEC 61727,IEC 62116,CEI 0-21,EN 50549,NRS 097,RD 140,UNE 217002,OVE-Richtlinie R25,G99,VDE-AR-N 4105\u003cbr\/\u003eSafety standards: IEC\/EN 61000-6-1\/2\/3\/4, IEC\/EN 62109-1, IEC\/EN 62109-2\u003cbr\/\u003eOvervoltage protection class: OVC II (DC), OVC III (AC)\u003cbr\/\u003eDimensions: 408 x 638 x 237 mm (without connectors and holders)\u003cbr\/\u003eWeight: 30.5 kg\u003cbr\/\u003eDegree of protection: IP65\u003cbr\/\u003e\u003cbr\/\u003e","brand":"DEYE","offers":[{"title":"Default Title","offer_id":53044533166418,"sku":"04230649","price":59804.0,"currency_code":"CZK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0954\/9624\/1490\/files\/04230649_01fd4269-ce34-461f-981a-33b02383fd91.png?v=1776148530"},{"product_id":"stridac-hybridni-deye-sun-10k-sg01hp3-eu-am2-10kw-3f-hv","title":"Hybrid inverter DEYE SUN-10K-SG01HP3-EU-AM2, 10kW, 3F, HV","description":"SUN 5\/6\/8\/10\/12\/15\/20\/25K-SG01HP3-EU-AM2 is a brand new series of three-phase hybrid inverters supporting 160-700V HV battery, ensuring higher system efficiency and lower waste heat production. Thanks to the compact, sophisticated design and first-class technologies, this series manages to increase the power of the PV system by up to 30% compared to the rated power of the inverter (DC\/AC ratio = 1.3). This eliminates the need to always choose a model with the same performance for the PV system, which brings savings in the cost of installation. It supports three-phase asymmetric output up to 150% for the widest possible application in various conditions. The color LCD display provides a user-friendly interface for both system overview and configuration (battery management, AC\/solar charging depending on different applications, etc.). The biggest advantage of this converter is the adjustable \"smart load\" input\/output where you can connect a generator, string converter, or heating cartridge for heating water. The options of this port offer you to use similar functions as the wattrouter.\u003cbr\/\u003e\u003cbr\/\u003eMain parameters\u003cbr\/\u003e\u003cbr\/\u003eHigh voltage design for higher efficiency\u003cbr\/\u003e3-phase asymmetrical output\u003cbr\/\u003eTwo MPPT trackers\u003cbr\/\u003eTwo string inputs (4 connectors)\u003cbr\/\u003eWorking voltage MPPT 150 - 850V\u003cbr\/\u003eIntelligent monitoring platform\u003cbr\/\u003eUnique functions Smart Load, Grid peak shaving, phase balancing\u003cbr\/\u003ePossibility to connect up to 10 parallel units\u003cbr\/\u003e6 time windows for charging and discharging\u003cbr\/\u003e\u003cbr\/\u003eThis device is in the list of products of the New green savings program (SVT35009)\u003cbr\/\u003e\u003cbr\/\u003e\u003cbr\/\u003eTechnical parameters\u003cbr\/\u003e\u003cbr\/\u003eBattery\u003cbr\/\u003eBattery type: lithium-ion\u003cbr\/\u003eBattery voltage: 160 - 700 VDC\u003cbr\/\u003eMax. charging current: 37 A\u003cbr\/\u003eMax. discharge current: 37 A\u003cbr\/\u003eNumber of battery inputs: 1\u003cbr\/\u003e\u003cbr\/\u003ePV input\u003cbr\/\u003eMax. PV power: 13000 W\u003cbr\/\u003eMax. DC Voltage: 1000V\u003cbr\/\u003eStarting voltage: 180V\u003cbr\/\u003eMax. input short-circuit current: 30 + 30 A\u003cbr\/\u003eMax. input operating current: 20 + 20 A\u003cbr\/\u003e\u003cbr\/\u003eAC input \/ output\u003cbr\/\u003eRated active power: 10000 W\u003cbr\/\u003eRated reactive power: 11000 VA\u003cbr\/\u003eMax. overload: 1.5x rated power after 10s\u003cbr\/\u003eRated voltage: 220 \/ 380 V, 230 \/ 400 V\u003cbr\/\u003eConnection type: 3L + N + PE\u003cbr\/\u003eMains frequency: 45 to 65 Hz\u003cbr\/\u003e\u003cbr\/\u003eEfficiency\u003cbr\/\u003eMax. efficiency: 97.6%\u003cbr\/\u003eEURO efficiency: 97%\u003cbr\/\u003eMPPT efficiency: \u003e99%\u003cbr\/\u003e\u003cbr\/\u003eProtection function\u003cbr\/\u003eDC polarity reversal\u003cbr\/\u003eAC current overload\u003cbr\/\u003eAC overvoltage\u003cbr\/\u003eAC output short circuit\u003cbr\/\u003eDetection of the DC component on the AC output\u003cbr\/\u003eOvervoltage during a sharp drop in load\u003cbr\/\u003eLeakage current detection in PE\u003cbr\/\u003eArc interrupter\u003cbr\/\u003eMonitoring of the electrical network\u003cbr\/\u003eIsland isolation function\u003cbr\/\u003eEarth fault detection\u003cbr\/\u003eDC input switch\u003cbr\/\u003eDC terminal block resistance detection\u003cbr\/\u003eResidual Current Device (RCD)\u003cbr\/\u003eOverheating\u003cbr\/\u003ePower surges\u003cbr\/\u003eSurge Protection Class: Type II (AC), Type II (DC)\u003cbr\/\u003e\u003cbr\/\u003eOther parameters\u003cbr\/\u003eWorking temperature: -40°C to +60°C\u003cbr\/\u003eAir humidity: 0 - 100%\u003cbr\/\u003eMax. altitude: 2000 m\u003cbr\/\u003eNoise level: ? 55 dB\u003cbr\/\u003eCooling: active intelligently controlled\u003cbr\/\u003eTopology: non-isolated\u003cbr\/\u003eNetwork standards: IEC 61727,IEC 62116,CEI 0-21,EN 50549,NRS 097,RD 140,UNE 217002,OVE-Richtlinie R25,G99,VDE-AR-N 4105\u003cbr\/\u003eSafety standards: IEC\/EN 61000-6-1\/2\/3\/4, IEC\/EN 62109-1, IEC\/EN 62109-2\u003cbr\/\u003eOvervoltage protection class: OVC II (DC), OVC III (AC)\u003cbr\/\u003eDimensions: 408 x 638 x 237 mm (without connectors and brackets)\u003cbr\/\u003eWeight: 30.5 kg\u003cbr\/\u003eDegree of protection: IP65\u003cbr\/\u003e\u003cbr\/\u003e","brand":"DEYE","offers":[{"title":"Default Title","offer_id":53044533231954,"sku":"04230650","price":35999.0,"currency_code":"CZK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0954\/9624\/1490\/files\/04230650_0c7a234b-0866-46d8-a005-1473a933aa76.png?v=1776233287"},{"product_id":"stridac-hybridni-deye-sun-10k-sg04lp3-eu-10kw-3f-lv-eg-d","title":"Hybrid inverter DEYE SUN-10K-SG04LP3-EU (10kw)","description":"The versatile Deye SUN-10K-SG04LP3-EU, low-voltage 3-phase hybrid inverter with wall mount combines a solar inverter and a battery charger. It supports asymmetric 3-phase output with a range of 0 to 5 kW per phase, 100% overload capability for 10 s, extending usability to the absolute maximum. The inverter is compatible with low voltage 40V to 60V batteries. Communication with BMS takes place via CAN or RS485 interface and is fully compatible with lead and lithium batteries of many brands. The color LCD display provides a user-friendly interface for both system overview and configuration (battery management, AC\/solar charging depending on different applications, etc.). The biggest advantage of this converter is the adjustable \"smart load\" input \/ output, where you can connect a generator, mains converter, or heating element for heating water. The options of this port offer you to use similar functions as the wattrouter.\u003cbr\/\u003e\u003cbr\/\u003e\u003cbr\/\u003eMain parameters\u003cbr\/\u003e\u003cbr\/\u003eLow voltage versatile design\u003cbr\/\u003e3-phase asymmetrical output\u003cbr\/\u003eTwo MPPT trackers\u003cbr\/\u003eThree string inputs (6 connectors)\u003cbr\/\u003eMPPT working voltage 200 to 650 V\u003cbr\/\u003eIntelligent monitoring platform\u003cbr\/\u003eUnique functions Smart Load, Grid peak shaving, phase balancing\u003cbr\/\u003ePossibility to connect up to 10 parallel units\u003cbr\/\u003e6 time windows for charging and discharging\u003cbr\/\u003e\u003cbr\/\u003eThis device complies with the New Green Savings subsidy program (SVT30772, SVT32118)\u003cbr\/\u003e\u003cbr\/\u003e\u003cbr\/\u003eTechnical parameters\u003cbr\/\u003e\u003cbr\/\u003eBattery\u003cbr\/\u003eBattery type: lithium-ion \/ lead-acid\u003cbr\/\u003eBattery voltage: 40 to 60 VDC\u003cbr\/\u003eMax. charging current: 210 A\u003cbr\/\u003eMax. discharge current: 210 A\u003cbr\/\u003eNumber of battery inputs: 1\u003cbr\/\u003e\u003cbr\/\u003ePV input\u003cbr\/\u003eMax. PV power: 13000 W\u003cbr\/\u003eMax. DC Voltage: 800V\u003cbr\/\u003eStarting voltage: 160 V\u003cbr\/\u003eMax. input short-circuit current: 34 + 17 A\u003cbr\/\u003eMax. input operating current: 26 + 13 A\u003cbr\/\u003e\u003cbr\/\u003eAC input \/ output\u003cbr\/\u003eRated active power: 10000 W\u003cbr\/\u003eRated reactive power: 11000 VA\u003cbr\/\u003eMax. overload: 1.5x rated power after 10s\u003cbr\/\u003eRated voltage: 220 \/ 380 V, 230 \/ 400 V\u003cbr\/\u003eConnection type: 3L + N + PE\u003cbr\/\u003eMains frequency: 45 to 65 Hz\u003cbr\/\u003e\u003cbr\/\u003eEfficiency\u003cbr\/\u003eMax. efficiency: 97.6%\u003cbr\/\u003eEURO efficiency: 97%\u003cbr\/\u003eMPPT efficiency: \u003e99%\u003cbr\/\u003e\u003cbr\/\u003eProtection function\u003cbr\/\u003eDC polarity reversal\u003cbr\/\u003eAC current overload\u003cbr\/\u003eAC overvoltage\u003cbr\/\u003eAC output short circuit\u003cbr\/\u003eDetection of the DC component on the AC output\u003cbr\/\u003eOvervoltage during a sharp drop in load\u003cbr\/\u003eLeakage current detection in PE\u003cbr\/\u003eArc interrupter\u003cbr\/\u003eMonitoring of the electrical network\u003cbr\/\u003eIsland isolation function\u003cbr\/\u003eEarth fault detection\u003cbr\/\u003eDC input switch\u003cbr\/\u003eDC terminal block resistance detection\u003cbr\/\u003eResidual Current Device (RCD)\u003cbr\/\u003eOverheating\u003cbr\/\u003ePower surges\u003cbr\/\u003eSurge Protection Class: Type II (AC), Type II (DC)\u003cbr\/\u003e\u003cbr\/\u003eOther parameters\u003cbr\/\u003eWorking temperature: -40°C to +60°C\u003cbr\/\u003eAir humidity: 0 - 100%\u003cbr\/\u003eMax. altitude: 2000 m\u003cbr\/\u003eNoise level: ? 45 dB\u003cbr\/\u003eCooling: active intelligently controlled\u003cbr\/\u003eTopology: non-isolated\u003cbr\/\u003eNetwork standards: IEC 61727,IEC 62116,CEI 0-21,EN 50549,NRS 097,RD 140,UNE 217002,OVE-Richtlinie R25,G99,VDE-AR-N 4105\u003cbr\/\u003eSafety standards: IEC\/EN 61000-6-1\/2\/3\/4, IEC\/EN 62109-1, IEC\/EN 62109-2\u003cbr\/\u003eOvervoltage protection class: OVC II (DC), OVC III (AC)\u003cbr\/\u003eDimensions: 281 x 422 x 702 mm (without connectors and brackets)\u003cbr\/\u003eWeight: 33,6 kg\u003cbr\/\u003eDegree of protection: IP65","brand":"DEYE","offers":[{"title":"Default Title","offer_id":53044534903122,"sku":"04230653","price":59195.0,"currency_code":"CZK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0954\/9624\/1490\/files\/04230653_6f5dadd0-1489-4177-91c2-a6aa0539f00a.png?v=1776148637"},{"product_id":"menic-napeti-hybridni-carspa-mks2k-12v-1800w","title":"Hybrid voltage converter CARSPA MKS2K 12V\/1800W","description":"New and improved line of MKS hybrid inverters, now with support for lithium batteries and BMS communication, higher input photovoltaic voltage, higher power, and also the possibility of remote monitoring.\u003cbr\/\u003e\u003cbr\/\u003eMKS is a combination of a solar MPPT controller, a battery charger and a full sine wave inverter with backup from the public electricity grid. It is an easy, comprehensive and compact solution for creating your own single-phase photovoltaic power plant for a home, cottage or caravan. Just connect the battery and appliances. At the same time, it can function as a backup UPS source in the event of a power outage, and its output is purely island, so there can be no unwanted overflows back into the grid. Ultra-fast switching between battery and grid will not affect the operation of appliances. It is equipped with a very clear and backlit LCD display for monitoring operating information. Several options for the displayed data can be set. By default, the inverter operates in uninterruptible power supply mode, but you can set any priority for power supply from the grid \/ solar energy \/ battery, as well as the priority of the source for charging the battery.\u003cbr\/\u003e\u003cbr\/\u003e- pure sine wave, suitable for all types of appliances\u003cbr\/\u003e- integrated MPPT solar controller with voltage range 55 - 450 V DC\u003cbr\/\u003e- single-phase island output without overflows (cannot be connected in parallel to the DS)\u003cbr\/\u003e- clear and adjustable LCD display\u003cbr\/\u003e- selectable working modes and priority of power supplies\u003cbr\/\u003e- adjustable operating parameters as needed\u003cbr\/\u003e- integrated short circuit \/ overload circuit breaker\u003cbr\/\u003e- protection against overheating, overcharging and excessive battery discharge\u003cbr\/\u003e- AGM and GEL batteries, or LiFePO4 can be used (only for experienced users)\u003cbr\/\u003e- BMS communication support (Pylon, Pace protocol, no protocol)\u003cbr\/\u003e- the battery can be automatically recharged from the network if solar energy is not available\u003cbr\/\u003e- sound notification of incorrect status and malfunction\u003cbr\/\u003e- cold start and energy saving mode function\u003cbr\/\u003e- active cooling with intelligent control (noiseless at low load)\u003cbr\/\u003e- RS485 \/ RS232 communication port\u003cbr\/\u003e\u003cbr\/\u003e\u003cbr\/\u003eTechnické parametry\u003cbr\/\u003e\u003cbr\/\u003eVstupní napětí sítě: 90-280 V AC\u003cbr\/\u003eFrekvence: 50 \/ 60 Hz (auto detekce)\u003cbr\/\u003eVýstup: 1 fáze, 230 V AC +- 5%\u003cbr\/\u003eVýkon měniče: 1800 W \/ 2200 VA\u003cbr\/\u003eŠpičkový výkon: 3600 W \/ 4400 VA po dobu 5 sec.\u003cbr\/\u003eSpínací prodleva: 10-20 ms\u003cbr\/\u003eVýstupní vlna: čistý sinusový průběh\u003cbr\/\u003eNapětí baterie: 12 V\u003cbr\/\u003eUdržovací napětí: 13.5 V\u003cbr\/\u003ePřepětí baterie: 15.5 V\u003cbr\/\u003eTyp baterie: AGM, GEL, LiFePO4 (nutno správně nastavit!)\u003cbr\/\u003eMax. nabíjecí proud ze sítě: 60 A\u003cbr\/\u003eMax. proud MPPT regulátoru: 80 A\u003cbr\/\u003eMax. výkon panelů: 2000 W\u003cbr\/\u003eMax. napětí solárních panelů (Voc): 450 V DC\u003cbr\/\u003eProvozní rozsah napětí MPPT regulátoru: 55 – 450 V\u003cbr\/\u003ePriorita napájení měniče: pouze solar \/ UPS \/ baterie zálohovaná sítí\u003cbr\/\u003ePriorita nabíjení: solar \/ síť \/ solar + síť \/ pouze solar\u003cbr\/\u003eVlastní spotřeba: 2 W\u003cbr\/\u003eÚčinnost: 98 %\u003cbr\/\u003eRozměry: 405 x 286 x 98 mm\u003cbr\/\u003eProvozní teplota: -10 až 55°C\u003cbr\/\u003eHmotnost: 4.5kg\u003cbr\/\u003eStupeň krytí: IP20","brand":"CARSPA","offers":[{"title":"Default Title","offer_id":53047425859922,"sku":"04230680","price":5590.0,"currency_code":"CZK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0954\/9624\/1490\/files\/04230680_4391cd73-fa5b-43a8-ac5c-ef56aa065c1e.png?v=1776148760"},{"product_id":"menic-napeti-hybridni-carspa-mks4k-24-24v-3800w","title":"Hybrid voltage converter CARSPA MKS4K-24 24V\/3800W","description":"New and improved line of MKS hybrid inverters, now with support for lithium batteries and BMS communication, higher input photovoltaic voltage, higher power, and also the possibility of remote monitoring.\u003cbr\/\u003e\u003cbr\/\u003eMKS is a combination of a solar MPPT controller, a battery charger and a full sine wave inverter with backup from the public electricity grid. It is an easy, comprehensive and compact solution for creating your own single-phase photovoltaic power plant for a home, cottage or caravan. Just connect the battery and appliances. At the same time, it can function as a backup UPS source in the event of a power outage, and its output is purely island, so there can be no unwanted overflows back into the grid. Ultra-fast switching between battery and grid will not affect the operation of appliances. It is equipped with a very clear and backlit LCD display for monitoring operating information. Several options for the displayed data can be set. By default, the inverter operates in uninterruptible power supply mode, but you can set any priority for power supply from the grid \/ solar energy \/ battery, as well as the priority of the source for charging the battery.\u003cbr\/\u003e\u003cbr\/\u003e- pure sine wave, suitable for all types of appliances\u003cbr\/\u003e- integrated MPPT solar controller with voltage range 55 - 450 V DC\u003cbr\/\u003e- single-phase island output without overflows (cannot be connected in parallel to the DS)\u003cbr\/\u003e- clear and adjustable LCD display\u003cbr\/\u003e- selectable working modes and priority of power supplies\u003cbr\/\u003e- adjustable operating parameters as needed\u003cbr\/\u003e- integrated short circuit \/ overload circuit breaker\u003cbr\/\u003e- protection against overheating, overcharging and excessive battery discharge\u003cbr\/\u003e- AGM and GEL batteries, or LiFePO4 can be used (only for experienced users)\u003cbr\/\u003e- BMS communication support (Pylon, Pace protocol, no protocol)\u003cbr\/\u003e- the battery can be automatically recharged from the network if solar energy is not available\u003cbr\/\u003e- sound notification of incorrect status and malfunction\u003cbr\/\u003e- cold start and energy saving mode function\u003cbr\/\u003e- active cooling with intelligent control (noiseless at low load)\u003cbr\/\u003e- RS485 \/ RS232 communication port\u003cbr\/\u003e\u003cbr\/\u003e\u003cbr\/\u003eTechnical parameters\u003cbr\/\u003e\u003cbr\/\u003eInput voltage: 90-280 V AC\u003cbr\/\u003eFrequency: 50 \/ 60 Hz (auto detection)\u003cbr\/\u003eOutput: 1 phase, 230 V AC +- 5%\u003cbr\/\u003eInverter power: 3800 W \/ 4200 VA\u003cbr\/\u003ePeak power: 7600 W \/ 8400 VA for 5 sec.\u003cbr\/\u003eSwitching delay: 10-20 ms\u003cbr\/\u003eOutput wave: pure sine wave\u003cbr\/\u003eBattery voltage: 24 V\u003cbr\/\u003eSuspension voltage: 27 V\u003cbr\/\u003eBattery surge voltage: 31 V\u003cbr\/\u003eBattery type: AGM, GEL, LiFePO4 (must be set correctly!)\u003cbr\/\u003eMax. charging current from the mains: 80 A\u003cbr\/\u003eMax. MPPT controller current: 110 A\u003cbr\/\u003eMax. panel power: 6000 W\u003cbr\/\u003eMax. solar panel voltage (Voc): 450 V DC\u003cbr\/\u003eMPPT controller operating voltage range: 55 – 450 V\u003cbr\/\u003eInverter power supply priority: solar only \/ UPS \/ battery backed up by the grid\u003cbr\/\u003eCharging priority: solar \/ grid \/ solar + grid \/ solar only\u003cbr\/\u003eOwn consumption: 2 W\u003cbr\/\u003eEfficiency: 98%\u003cbr\/\u003eDimensions: 423 x 290 x 100 mm\u003cbr\/\u003eOperating temperature: -10 to 55°C\u003cbr\/\u003eWeight: 6.8 kg\u003cbr\/\u003eProtection degree: IP20\u003cbr\/\u003e","brand":"CARSPA","offers":[{"title":"Default Title","offer_id":53047425990994,"sku":"04230681","price":7390.0,"currency_code":"CZK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0954\/9624\/1490\/files\/04230681_5ba7d86b-35fa-4dc1-863a-93729f1eb257.png?v=1776148760"},{"product_id":"menic-napeti-hybridni-carspa-mks4k-24-24v-3800w-bluetooth","title":"Hybrid voltage converter CARSPA MKS4K-24 24V\/3800W,bluetooth","description":"New and improved line of MKS hybrid inverters, now with support for lithium batteries and BMS communication, higher input photovoltaic voltage, higher power, and also the possibility of remote monitoring.\u003cbr\/\u003e\u003cbr\/\u003eMKS is a combination of a solar MPPT controller, a battery charger and a full sine wave inverter with backup from the public electricity grid. It is an easy, comprehensive and compact solution for creating your own single-phase photovoltaic power plant for a home, cottage or caravan. Just connect the battery and appliances. At the same time, it can function as a backup UPS source in the event of a power outage, and its output is purely island, so there can be no unwanted overflows back into the grid. Ultra-fast switching between battery and grid will not affect the operation of appliances. It is equipped with a very clear and backlit LCD display for monitoring operating information. Several options for the displayed data can be set. By default, the inverter operates in uninterruptible power supply mode, but you can set any priority for power supply from the grid \/ solar energy \/ battery, as well as the priority of the source for charging the battery.\u003cbr\/\u003e\u003cbr\/\u003e- pure sine wave, suitable for all types of appliances\u003cbr\/\u003e- integrated MPPT solar controller with voltage range 55 - 450 V DC\u003cbr\/\u003e- single-phase island output without overflows (cannot be connected in parallel to the DS)\u003cbr\/\u003e- clear and adjustable LCD display\u003cbr\/\u003e- selectable working modes and priority of power supplies\u003cbr\/\u003e- adjustable operating parameters as needed\u003cbr\/\u003e- integrated short circuit \/ overload circuit breaker\u003cbr\/\u003e- protection against overheating, overcharging and excessive battery discharge\u003cbr\/\u003e- AGM and GEL batteries, or LiFePO4 can be used (only for experienced users)\u003cbr\/\u003e- BMS communication support (Pylon, Pace protocol, no protocol)\u003cbr\/\u003e- the battery can be automatically recharged from the network if solar energy is not available\u003cbr\/\u003e- sound notification of incorrect status and malfunction\u003cbr\/\u003e- cold start and energy saving mode function\u003cbr\/\u003e- active cooling with intelligent control (noiseless at low load)\u003cbr\/\u003e- RS485 \/ RS232 communication port\u003cbr\/\u003e- remote management and monitoring option (Bluetooth)\u003cbr\/\u003e\u003cbr\/\u003eTechnical parameters\u003cbr\/\u003e\u003cbr\/\u003eInput voltage: 90-280 V AC\u003cbr\/\u003eFrequency: 50 \/ 60 Hz (auto detection)\u003cbr\/\u003eOutput: 1 phase, 230 V AC +- 5%\u003cbr\/\u003eInverter power: 3800 W \/ 4200 VA\u003cbr\/\u003ePeak power: 7600 W \/ 8400 VA for 5 sec.\u003cbr\/\u003eSwitching delay: 10-20 ms\u003cbr\/\u003eOutput wave: pure sine wave\u003cbr\/\u003eBattery voltage: 24 V\u003cbr\/\u003eSuspension voltage: 27 V\u003cbr\/\u003eBattery surge voltage: 31 V\u003cbr\/\u003eBattery type: AGM, GEL, LiFePO4 (must be set correctly!)\u003cbr\/\u003eMax. charging current from the mains: 80 A\u003cbr\/\u003eMax. MPPT controller current: 110 A\u003cbr\/\u003eMax. panel power: 6000 W\u003cbr\/\u003eMax. solar panel voltage (Voc): 450 V DC\u003cbr\/\u003eMPPT controller operating voltage range: 55 – 450 V\u003cbr\/\u003eInverter power supply priority: solar only \/ UPS \/ battery backed up by the grid\u003cbr\/\u003eCharging priority: solar \/ grid \/ solar + grid \/ solar only\u003cbr\/\u003eOwn consumption: 2 W\u003cbr\/\u003eEfficiency: 98%\u003cbr\/\u003eDimensions: 423 x 290 x 100 mm\u003cbr\/\u003eOperating temperature: -10 to 55°C\u003cbr\/\u003eWeight: 6.8 kg\u003cbr\/\u003eProtection degree: IP20\u003cbr\/\u003e","brand":"CARSPA","offers":[{"title":"Default Title","offer_id":53047426122066,"sku":"04230682","price":8290.0,"currency_code":"CZK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0954\/9624\/1490\/files\/04230682_f0cc8733-3441-40e1-a308-bd1beff8aae9.png?v=1776148761"},{"product_id":"hybridni-menic-napeti-cm3500-24n-24v-3500w","title":"Hybrid voltage converter CM3500-24N, 24V\/3500W","description":"The device is a combination of a pure sine wave inverter, UPS and MPPT solar panel controller. It is therefore a backup source with backup from the public grid or generator, battery charger and MPPT solar controller, while the backup priority can also be set inversely, i.e. priority from the public grid and backup from batteries or PV panels.\u003cbr\/\u003e\u003cbr\/\u003eProduct parameters:\u003cbr\/\u003e\u003cbr\/\u003e- pure sine wave, suitable for all appliances\u003cbr\/\u003e- MPPT solar controller for maximum energy yield from solar panels\u003cbr\/\u003e- single-phase island system without overflows (does not work in parallel connection mode to the public grid, connection to the grid serves only as a backup if the device is set up this way)\u003cbr\/\u003e- clear and adjustable LCD display\u003cbr\/\u003e- selectable operating modes and priority of power supplies\u003cbr\/\u003e- adjustable operating parameters as needed\u003cbr\/\u003e- integrated short circuit \/ overload circuit breaker\u003cbr\/\u003e- protection against overheating, overcharging and excessive battery discharge\u003cbr\/\u003e- AGM and GEL batteries, or LiFePO4 can be used (only for experienced users)\u003cbr\/\u003e- the battery can be automatically recharged from the grid if solar energy is not available\u003cbr\/\u003e- audible warning of incorrect status and malfunction\u003cbr\/\u003e- cold start and economy mode function\u003cbr\/\u003e- powerful active cooling\u003cbr\/\u003e\u003cbr\/\u003eTechnical parameters:\u003cbr\/\u003eMains input voltage: 90–270VAC (170–270VAC for the UPS)\u003cbr\/\u003eFrequency: 50 \/ 60 Hz (auto detection)\u003cbr\/\u003eOutput: 1 phase, 230 V AC ±5%\u003cbr\/\u003eInverter power: 3500 W \/ 3500 VA\u003cbr\/\u003ePeak power: 5000W for 5 sec.\u003cbr\/\u003eSwitching delay: \u003c10ms\u003cbr\/\u003eOutput wave: pure sine wave\u003cbr\/\u003eNominal battery voltage: 24V\u003cbr\/\u003eBattery charging method: CC \/ CV \/ Fload\u003cbr\/\u003eSuspension voltage: 27 V\u003cbr\/\u003eMax. battery charging voltage (Pb Liqid): 29.2V\u003cbr\/\u003eBattery type: AGM, GEL, LiFePO4 (for experienced users only)\u003cbr\/\u003eMax. charging current from the grid: 60A (default 30A)\u003cbr\/\u003eMax. charging current from the MPPT controller: 100A\u003cbr\/\u003eMax. total charging current MPPT + grid): 100A\u003cbr\/\u003eMax. panel power: 4000W\u003cbr\/\u003eMax. solar panel voltage (Voc): 500VDC\u003cbr\/\u003eMax. solar panel current: 15A\u003cbr\/\u003eMPPT controller operating voltage range: 30 – 450VDC\u003cbr\/\u003eInverter power supply priority: solar only \/ UPS \/ battery backed up by the grid\u003cbr\/\u003eCharging priority: solar \/ grid \/ solar + grid \/ solar only\u003cbr\/\u003eOwn consumption: 2W\u003cbr\/\u003eEfficiency: 98%\u003cbr\/\u003eDimensions: 330×298×98 mm\u003cbr\/\u003eOperating temperature: 0 to 55°C\u003cbr\/\u003eNet weight: 4.5 kg\u003cbr\/\u003eProtection degree: IP20","brand":"HADEX","offers":[{"title":"Default Title","offer_id":53047997038930,"sku":"04230685","price":6350.0,"currency_code":"CZK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0954\/9624\/1490\/files\/04230685_24a4cced-48e0-4042-bb62-41ee1af93e3c.png?v=1776149201"},{"product_id":"stridac-hybridni-deye-sun-12k-sg04lp3-eu-12kw-3f-lv","title":"Hybrid inverter DEYE SUN-12K-SG04LP3-EU (12kw)","description":"The versatile low-voltage 3-phase hybrid inverter Deye SUN-12K-SG04LP3-EU with wall bracket combines a solar inverter and battery charger. It supports asymmetrical 3-phase output with a range of 0 to 5 kW on each phase, 100% overload capacity for 10 seconds, extending its usability to the absolute maximum. The converter is compatible with low-voltage 40V to 60V batteries. Communication with the BMS is via CAN or RS485 interface and is fully compatible with lead-acid and lithium batteries from many brands. The colour LCD display provides a user-friendly interface for system overview and configuration (battery management, AC\/solar charging depending on different applications, etc.). The biggest advantage of this converter is the adjustable ‘smart load’ input\/output, to which a generator, mains converter or heating element for water heating can be connected. The possibilities of this port allow you to use similar functions to a wattrouter.\u003cbr\/\u003e \u003cbr\/\u003e\u003cbr\/\u003eThis inverter has been successfully certified by the EG.D a.s. laboratory and can be permanently connected to the distribution network in the Czech Republic in accordance with the rules valid from 1 January 2025.\u003cbr\/\u003e\u003cbr\/\u003eMain parameters:\u003cbr\/\u003eSupports 3-phase asymmetrical output\u003cbr\/\u003eNumber of MPP Trackers: 2 inputs (2+1)\u003cbr\/\u003eMPPT voltage range: 200 to 650 V\u003cbr\/\u003eCommunication interface: CAN\/RS-485 (for BMS), Modbus (RTU 485, e.g. for Loxone or external control system), RS-232 (for cloud dongle)\u003cbr\/\u003eSolarman intelligent monitoring platform for photovoltaic power plant management. Can be equipped with a communication interface via Wi-Fi (included), Ethernet or LTE.\u003cbr\/\u003eUnique features: Smart Load, Grid peak shaving, phase balancing\u003cbr\/\u003eThis device is included in the New Green Savings programme product list (code: SVT30773)\u003cbr\/\u003e\u003cbr\/\u003e\u003cbr\/\u003eTechnical parameters\u003cbr\/\u003e\u003cbr\/\u003eCommunication with BMS    CAN\/RS-485\u003cbr\/\u003eCommunication interface: RS-232, CAN\/RS-485, Modbus\u003cbr\/\u003eBattery inputs: 1\u003cbr\/\u003eConnector type: MC4\u003cbr\/\u003eNumber of phases: 3\u003cbr\/\u003eMax. DC input power: 15.6 kW\u003cbr\/\u003eMax. output power: 12 kW\u003cbr\/\u003eMaximum output current: 18.2 A\u003cbr\/\u003eNumber of MPP trackers: 2\u003cbr\/\u003eTotal number of strings: 2+1\u003cbr\/\u003ePV input current: 26+13 A\u003cbr\/\u003eMPPT operating range: 200 to 650 V\u003cbr\/\u003eBattery system: Low voltage\u003cbr\/\u003eBattery voltage range: 40 to 60 V DC\u003cbr\/\u003eMax. charging and discharging current: 240 A\u003cbr\/\u003eEfficiency: 97.6%\u003cbr\/\u003e\u003cbr\/\u003eProtection rating: IP65\u003cbr\/\u003eDesign: Wall-mounted\u003cbr\/\u003eOperating temperature: -40 to 60\u003cbr\/\u003eWeight: 33.6 kg\u003cbr\/\u003eDepth: 279 mm\u003cbr\/\u003eWidth: 422 mm\u003cbr\/\u003eHeight: 699 mm","brand":"DEYE","offers":[{"title":"Default Title","offer_id":53047998611794,"sku":"04230684","price":52299.0,"currency_code":"CZK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0954\/9624\/1490\/files\/04230684_f05b7cc8-af6b-4aa7-8328-5b040f561c3f.png?v=1776149101"},{"product_id":"stridac-hybridni-deye-sun-10k-sg05lp3-eu-sm2-10kw-3f-5-generace-lv","title":"Hybrid inverter DEYE SUN-10K-SG05LP3-EU-SM2, 10kW, 3P, 5th generation, LV","description":"Všestranný nízkonapäťový 3fázový hybridný menič Deye SUN-10K 5. generácie s nástenným držiakom kombinuje solárny invertor a nabíjačku batérií. Podporuje asymetrický 3-fázový výstup s rozsahom 0 až 5 kW na každej fáze, možnosť preťaženia o 100 % počas 10 s, čím rozširuje aplikačné scenáre na absolútne maximum. Menič je kompatibilný s nízkonapäťovými 40 až 60V batériami. Komunikácia s BMS je cez CAN alebo RS485 rozhranie a je plne kompatibilná aj s najnovšími modelmi batérií iných značiek. Farebný LCD displej zaisťuje užívateľsky prívetivé rozhranie pre prehľad aj konfiguráciu systému (riadenie batérie, AC\/solárne nabíjanie v závislosti na rôznych aplikáciách atď.). Najväčšou výhodou tohto meniča je nastaviteľný vstup\/výstup „smart load“ kam je možné pripojiť generátor, stringový menič, alebo vykurovaciu patrónu pre ohrev vody. Možnosti tohto portu vám ponúka využiť podobné funkcie ako wattrouter.\u003cbr\/\u003e\u003cbr\/\u003eTento menič úspešne prešiel certifikáciou PPDS v kategóriách A1 aj A2 dňa 24. 09. 2025 v laboratóriu čistej energetiky, EG.D v Českých Budějoviciach. Na základe týchto certifikátov môže byť trvalo pripojený do distribučnej siete na území Slovenskej republiky podľa pravidiel platných od 1. 1. 2025.\u003cbr\/\u003e\u003cbr\/\u003e\u003cbr\/\u003eParametre produktu:\u003cbr\/\u003e\u003cbr\/\u003e- podporuje 3-fázový nesymetrický výstup\u003cbr\/\u003e- počet MPP Trackerov: 2 vstupy (2+2)\u003cbr\/\u003e- rozsah napätia MPPT: 200 až 650 V\u003cbr\/\u003e- vysoký nabíjací a vybíjací prúd: 210 A\u003cbr\/\u003e- rozhranie na komunikáciu: CAN\/RS-485 (pre BMS), Modbus (RTU 485 napríklad pre Loxone, alebo externý riadiaci systém), RS-232 (pre cloud dongle)\u003cbr\/\u003e- inteligentná monitorovacia platforma Solarman pre správu fotovoltaických elektrární. Možno osadiť komunikačným rozhraním cez Wi-Fi (v balení), Ethernet, alebo LTE.\u003cbr\/\u003e- unikátna funkcia Smart Load, Grid peak shaving, phase balancing\u003cbr\/\u003e- stupeň krytia IP65\u003cbr\/\u003e\u003cbr\/\u003e\u003cbr\/\u003eTechnické parametre:\u003cbr\/\u003e\u003cbr\/\u003eKonektory a rozhrania:\u003cbr\/\u003e- komunikácia s BMS: CAN\/RS-485\u003cbr\/\u003e- komunikačné rozhranie: RS-232, CAN\/RS-485, Modbus\u003cbr\/\u003e- batériové vstupy: 1\u003cbr\/\u003e- typ konektora: MC4\u003cbr\/\u003e- LCD displej\u003cbr\/\u003e\u003cbr\/\u003eNapájanie:\u003cbr\/\u003e- počet fáz: 3\u003cbr\/\u003e- max. DC vstupný výkon [kW]: 16\u003cbr\/\u003e- max. výstupný výkon [kW]: 10\u003cbr\/\u003e- maximálny výstupný prúd [A]: 14,5\u003cbr\/\u003e- maximálny trvalý AC priechodný prúd [A]: 45\u003cbr\/\u003e- počet MPP Trackerov: 2\u003cbr\/\u003e- počet stringov celkom: 2+2\u003cbr\/\u003e- PV maximálne napätie [V]: 800\u003cbr\/\u003e- PV vstupný prúd [A]: 26+26\u003cbr\/\u003e- PV vstupný skratový prúd [A]: 39+39\u003cbr\/\u003e- MPPT operačný rozsah [V]: 200 až 650\u003cbr\/\u003e- batériový systém: nízkonapäťový\u003cbr\/\u003e- rozsah napätia batérie [V]: 40 .. 60V DC\u003cbr\/\u003e- max. nabíjací a vybíjací prúd [A]: 210\u003cbr\/\u003e- účinnosť [%]: 97,6\u003cbr\/\u003e\u003cbr\/\u003eFyzické charakteristiky:\u003cbr\/\u003e- stupeň krytia: IP65\u003cbr\/\u003e- prevedenie: Na stenu\u003cbr\/\u003e- použitie: vonkajšie\u003cbr\/\u003e- prevádzková teplota [°C]: -40 až 60\u003cbr\/\u003e- hmotnosť [kg]: 35,2\u003cbr\/\u003e- hĺbka [mm]: 253\u003cbr\/\u003e- šírka [mm]: 386\u003cbr\/\u003e- výška [mm]: 660\u003cbr\/\u003e\u003cbr\/\u003e\u003cbr\/\u003eObsah balenia:\u003cbr\/\u003e- hybridný menič\u003cbr\/\u003e- nástenný držiak\u003cbr\/\u003e- 4x kotva do betónu\u003cbr\/\u003e- 3x meracia cievka 100 A \/ 50 mA\u003cbr\/\u003e- teplotný snímač pre Pb batérie\u003cbr\/\u003e- Wi-Fi dongle","brand":"DEYE","offers":[{"title":"Default Title","offer_id":53048437145938,"sku":"04230702","price":45990.0,"currency_code":"CZK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0954\/9624\/1490\/files\/04230702.png?v=1791196099"},{"product_id":"stridac-hybridni-deye-sun-12k-sg05lp3-eu-sm2-12kw-3f-5-generace-lv","title":"Hybrid inverter DEYE SUN-12K-SG05LP3-EU-SM2, 12kW, 3P, 5th generation, LV","description":"Všestranný nízkonapäťový 3fázový hybridný menič Deye SUN-12K 5. generácie s nástenným držiakom kombinuje solárny invertor a nabíjačku batérií. Podporuje asymetrický 3-fázový výstup s rozsahom 0 až 6 kW na každej fáze, možnosť preťaženia o 100 % počas 10 s, čím rozširuje aplikačné scenáre na absolútne maximum. Menič je kompatibilný s nízkonapäťovými 40 až 60V batériami. Komunikácia s BMS je cez CAN alebo RS485 rozhranie a je plne kompatibilná aj s najnovšími modelmi batérií iných značiek. Farebný LCD displej zaisťuje užívateľsky prívetivé rozhranie pre prehľad aj konfiguráciu systému (riadenie batérie, AC\/solárne nabíjanie v závislosti na rôznych aplikáciách atď.). Najväčšou výhodou tohto meniča je nastaviteľný vstup\/výstup „smart load“ kam je možné pripojiť generátor, stringový menič, alebo vykurovaciu patrónu pre ohrev vody. Možnosti tohto portu vám ponúka využiť podobné funkcie ako wattrouter.\u003cbr\/\u003e\u003cbr\/\u003eTento menič úspešne prešiel certifikáciou PPDS v kategóriách A1 aj A2 dňa 24. 09. 2025 v laboratóriu čistej energetiky, EG.D v Českých Budějoviciach. Na základe týchto certifikátov môže byť trvalo pripojený do distribučnej siete na území Slovenskej republiky podľa pravidiel platných od 1. 1. 2025.\u003cbr\/\u003e\u003cbr\/\u003e\u003cbr\/\u003eParametre produktu:\u003cbr\/\u003e\u003cbr\/\u003e- podporuje 3-fázový nesymetrický výstup\u003cbr\/\u003e- počet MPP Trackerov: 2 vstupy (2+2)\u003cbr\/\u003e- rozsah napätia MPPT: 200 až 650 V\u003cbr\/\u003e- vysoký nabíjací a vybíjací prúd: 240 A\u003cbr\/\u003e- rozhranie na komunikáciu: CAN\/RS-485 (pre BMS), Modbus (RTU 485 napríklad pre Loxone, alebo externý riadiaci systém), RS-232 (pre cloud dongle)\u003cbr\/\u003e- inteligentná monitorovacia platforma Solarman pre správu fotovoltaických elektrární. Možno osadiť komunikačným rozhraním cez Wi-Fi (v balení), Ethernet, alebo LTE.\u003cbr\/\u003e- unikátna funkcia Smart Load, Grid peak shaving, phase balancing\u003cbr\/\u003e- stupeň krytia IP65\u003cbr\/\u003e\u003cbr\/\u003e\u003cbr\/\u003eTechnické parametre:\u003cbr\/\u003e\u003cbr\/\u003eKonektory a rozhrania:\u003cbr\/\u003e- komunikácia s BMS: CAN\/RS-485\u003cbr\/\u003e- komunikačné rozhranie: RS-232, CAN\/RS-485, Modbus\u003cbr\/\u003e- batériové vstupy: 1\u003cbr\/\u003e- typ konektora: MC4\u003cbr\/\u003e- LCD displej\u003cbr\/\u003e\u003cbr\/\u003eNapájanie:\u003cbr\/\u003e- počet fáz: 3\u003cbr\/\u003e- max. DC vstupný výkon [kW]: 19,2\u003cbr\/\u003e- max. výstupný výkon [kW]: 12\u003cbr\/\u003e- maximálny výstupný prúd [A]: 17,4\u003cbr\/\u003e- maximálny trvalý AC priechodný prúd [A]: 45\u003cbr\/\u003e- počet MPP Trackerov: 2\u003cbr\/\u003e- počet stringov celkom: 2+2\u003cbr\/\u003e- PV maximálne napätie [V]: 800\u003cbr\/\u003e- PV vstupný prúd [A]: 26+26\u003cbr\/\u003e- PV vstupný skratový prúd [A]: 39+39\u003cbr\/\u003e- MPPT operačný rozsah [V]: 200 až 650\u003cbr\/\u003e- Batériový systém: nízkonapäťový\u003cbr\/\u003e- Rozsah napätia batérie [V]: 40 .. 60V DC\u003cbr\/\u003e- Max. nabíjací a vybíjací prúd [A]: 240\u003cbr\/\u003e- účinnosť [%]: 97,6\u003cbr\/\u003e\u003cbr\/\u003eFyzické charakteristiky:\u003cbr\/\u003e- stupeň krytia: IP65\u003cbr\/\u003e- prevedenie: Na stenu\u003cbr\/\u003e- použitie: vonkajšie\u003cbr\/\u003e- prevádzková teplota [°C]: -40 až 60\u003cbr\/\u003e- hmotnosť [kg]: 35,2\u003cbr\/\u003e- hĺbka [mm]: 253\u003cbr\/\u003e- šírka [mm]: 386\u003cbr\/\u003e- výška [mm]: 660\u003cbr\/\u003e\u003cbr\/\u003e\u003cbr\/\u003eObsah balenia:\u003cbr\/\u003e- hybridný menič\u003cbr\/\u003e- nástenný držiak\u003cbr\/\u003e- 4x kotva do betónu\u003cbr\/\u003e- 3x meracia cievka 100 A \/ 50 mA\u003cbr\/\u003e- teplotný snímač pre Pb batérie\u003cbr\/\u003e- Wi-Fi dongle","brand":"DEYE","offers":[{"title":"Default Title","offer_id":53048437178706,"sku":"04230703","price":48500.0,"currency_code":"CZK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0954\/9624\/1490\/files\/04230703_b872acdd-0139-4cdb-93fc-712ca06d38ed.png?v=1776149816"},{"product_id":"menic-napeti-sinus-victron-energy-ve-direct-800va-48v-zanovni","title":"Victron Energy VE.Direct 800VA 48V SINUS voltage converter – as good as new","description":"Profesionální programovatelný měnič napětí 48V\/800VA s toroidním transformátorem, s ECO módem a rozhraním VE.Direct. \u003cbr\u003e\u003cbr\u003eOsvědčená spolehlivost profesionálních měničů Victron Energy s plnou zárukou na 5 let.\u003cbr\u003e \u003cbr\u003eMěnič obsahuje robustní toroidní transformátor, který prokazuje svou spolehlivost v měničích Victron Energy již po mnoho let.\u003cbr\u003eMěniče jsou odolné proti zkratu a chráněný proti přehřátí, ať už v důsledku přetížení nebo\u003cbr\u003evysoké teploty okolí.\u003cbr\u003e \u003cbr\u003eTento měnič je plně konfigurovatelný – jedná se zcela unikátní funkci, kdy máte možnost nastavit si pomocí PC následující parametry:\u003cbr\u003e• alarm nízkého a vysokého napětí baterie a resetovací úroveň\u003cbr\u003e• úroveň vypnutí měniče při nízkém a vysokém napětí baterie a resetovací úroveň\u003cbr\u003e• Výstupní napětí 220\/230\/240V\u003cbr\u003e• Frekvence 50 Hz nebo 60 Hz\u003cbr\u003e• Režim ECO zapnutí \/ vypnutí nastavení citlivosti ( nastavení úrovně kdy se měnič „uspí“ a kdy se opět „probudí“)\u003cbr\u003e \u003cbr\u003eK dispozici je také monitoring:\u003cbr\u003e• vstupní a výstupní napětí a proud, teplota, alarmy\u003cbr\u003e \u003cbr\u003eVysoký startovací výkon\u003cbr\u003ePotřebný ke spuštění zátěží, jako jsou výkonové měniče pro LED lampy, halogenové lampy nebo elektrické nářadí.\u003cbr\u003e \u003cbr\u003eRežim ECO\u003cbr\u003eV režimu ECO - když příkon zátěže klesne pod přednastavenou hodnotu měnič se přepne do pohotovostního režimu (uspí se a vlastní spotřeba měniče je pak pouze cca 1W). V pohotovostním režimu s velmi nízkou vlastní spotřebou se pak bude měnič pravidelně na krátkou dobu zapínat (nastavitelný parametr, standardně: každý 2,5 sekundy). Pokud příkon zátěže překročí předem nastavenou hodnotu, měnič se opět zapne. Díky této funkci ušetříte velké množství energie, kterou jinak měnič spotřeboval pro svůj provoz.\u003cbr\u003e \u003cbr\u003eVE.Direct komunikační port, který může být připojen k:\u003cbr\u003e \u003cbr\u003e• Počítači (nutný kabel VE.Direct to USB)\u003cbr\u003e• Smartphony Apple a Android, tablety MacBooky a jiná zařízení ( nutný VE.Direct Bluetooth dongle)\u003cbr\u003e \u003cbr\u003eSoftware zdarma\u003cbr\u003eAktuální verze SW jsou k dispozici na naší softwarové stránce\u003cbr\u003e \u003cbr\u003eVzdálené zapnutí \/ vypnutí, LED diagnostika – viz manuál.\u003cbr\u003e \u003cbr\u003eKabely pro připojení k baterii nejsou součástí, rádi Vám poradíme s návrhem vhodného průřezu kabelů. Neváhejte nás proto kontaktovat.\u003cbr\u003e\u003cbr\u003eTechnické parametry:  \u003cbr\u003eTrvalý výst. výkon při 25°C (VA): 800\u003cbr\u003eTrvalý činný výkon při 25°C \/ 40°C (W):650\/560\u003cbr\u003eŠpičkový činný výkon (W): 1500\u003cbr\u003eHmotnost (kg): 5,5\u003cbr\u003eRozměry v x š x h (mm):105x216x305\u003cbr\u003e\u003cbr\u003eTechnické specifikace naleznete níže v dokumentech ke stažení","brand":"VICTRON ENERGY","offers":[{"title":"Default Title","offer_id":53159140458834,"sku":"90329645","price":3969.0,"currency_code":"CZK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0954\/9624\/1490\/files\/90329645.png?v=1776149783"},{"product_id":"menic-napeti-sinus-victron-energy-ve-direct-800va-24v","title":"Voltage converter SINUS Victron Energy VE.Direct 800VA 24V","description":"The drive features a rugged toroidal transformer that has proven its reliability in Victron Energy drives for many years.\u003cbr\/\u003eThe inverters are short - circuit proof and protected against overheating, whether due to overload or overload\u003cbr\/\u003ehigh ambient temperatures.\u003cbr\/\u003e \u003cbr\/\u003eThis inverter is fully configurable - it is a completely unique function, where you can set the following parameters using a PC:\u003cbr\/\u003e• Low and high battery alarm and reset level\u003cbr\/\u003e• Inverter shutdown level at low and high battery voltage and reset level\u003cbr\/\u003e• Output voltage 220\/230 \/ 240V\u003cbr\/\u003e• Frequency 50 Hz or 60 Hz\u003cbr\/\u003e• ECO mode enable \/ disable sensitivity setting (setting the level when the drive \"sleeps\" and when it \"wakes up\" again)\u003cbr\/\u003e \u003cbr\/\u003eMonitoring is also available:\u003cbr\/\u003e• input and output voltage and current, temperature, alarms\u003cbr\/\u003e \u003cbr\/\u003eHigh starting power\u003cbr\/\u003eNeeded to start loads such as power converters for LED lamps, halogen lamps or power tools.\u003cbr\/\u003e \u003cbr\/\u003eECO mode\u003cbr\/\u003eIn ECO mode - when the load power drops below the preset value, the inverter switches to standby mode (it sleeps and the inverter's own consumption is then only about 1W). In standby mode with very low self-consumption, the inverter will then switch on regularly for a short time (adjustable parameter, default: every 2.5 seconds). If the load power exceeds the preset value, the inverter switches on again. Thanks to this function, you save a large amount of energy that the inverter would otherwise consume for its operation.\u003cbr\/\u003e \u003cbr\/\u003eVE.Direct communication port that can be connected to:\u003cbr\/\u003e \u003cbr\/\u003e• Computers (VE.Direct to USB cable required)\u003cbr\/\u003e• Apple and Android smartphones, MacBooks and other devices (VE.Direct Bluetooth dongle required)\u003cbr\/\u003e \u003cbr\/\u003eFree software\u003cbr\/\u003eCurrent SW versions are available on our software page\u003cbr\/\u003e \u003cbr\/\u003eRemote on \/ off, LED diagnostics - see manual.\u003cbr\/\u003e \u003cbr\/\u003eCables for connection to the battery are not included, we will be happy to make the necessary lengths for you. So do not hesitate to contact us.\u003cbr\/\u003e\u003cbr\/\u003eTechnical parameters:\u003cbr\/\u003eContinuous output power at 25 ° C (VA): 800\u003cbr\/\u003eContinuous active power at 25 ° C \/ 40 ° C (W): 650\/560\u003cbr\/\u003ePeak active power (W): 1500\u003cbr\/\u003eWeight (kg): 5.5\u003cbr\/\u003eDimensions h x w x d (mm): 105x216x305\u003cbr\/\u003e\u003cbr\/\u003eTechnical specifications can be found in the downloadable documents below","brand":"VICTRON ENERGY","offers":[{"title":"Default Title","offer_id":53159180730706,"sku":"04230481","price":5659.0,"currency_code":"CZK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0954\/9624\/1490\/files\/04230481.png?v=1776146106"},{"product_id":"menic-napeti-victron-energy-1200va-24v-ve-direct","title":"Voltage converter Victron Energy 1200VA 24V VE.Direct","description":"Victron Energy 24V\/1200VA VE.Direct. Fully programmable 24V\/1200VA pure sine wave inverter with toroidal transformer, built-in VE.Direct interface and ECO mode.\u003cbr\/\u003eThe Victron Energy voltage converter is an efficient and reliable voltage converter built on a proven and field-tested platform. The inverter incorporates a robust toroidal transformer that has proven its reliability in Victron Energy inverters for many years.\u003cbr\/\u003e\u003cbr\/\u003eProduct parameters:\u003cbr\/\u003e\u003cbr\/\u003e- Easily accessible terminals: installation is easier than ever because terminals are now more accessible to the installer.\u003cbr\/\u003e\u003cbr\/\u003eVE.Direct:\u003cbr\/\u003e\u003cbr\/\u003eThe VE.Direct port can be connected to:\u003cbr\/\u003e- computer (VE.Direct to USB interface cable required)\u003cbr\/\u003e- Smartphones, tablets, MacBooks and other Apple and Android devices (VE.Direct Bluetooth Smart dongle required)\u003cbr\/\u003e\u003cbr\/\u003eFully configurable:\u003cbr\/\u003e- Low battery alarm triggering and level reset\u003cbr\/\u003e- Low battery shutdown and restart levels\u003cbr\/\u003e- Dynamic shutdown: load-dependent shutdown level\u003cbr\/\u003e- output voltage 210 - 245 V\u003cbr\/\u003e- frequency 50 Hz or 60 Hz\u003cbr\/\u003e- ECO mode on\/off and ECO mode sensing level\u003cbr\/\u003e\u003cbr\/\u003eTracking:\u003cbr\/\u003e- Input and output voltages, % load and alarms\u003cbr\/\u003e\u003cbr\/\u003eProven reliability:\u003cbr\/\u003e- Full bridge and toroidal transformer topology has proven its reliability over many years. The inverters are short-circuit proof and protected against overheating, whether due to overload or high ambient temperature.\u003cbr\/\u003e\u003cbr\/\u003eHigh starting performance:\u003cbr\/\u003e- Required to start loads such as inverters for LED bulbs, halogen bulbs, refrigerators or power tools.\u003cbr\/\u003e\u003cbr\/\u003eECO mode:\u003cbr\/\u003eIn ECO mode, the inverter switches to standby mode when the load drops below a preset value. In standby mode, the inverter turns on for a short period of time every 2.5 seconds (adjustable). If the load exceeds the preset level, the inverter will remain on.\u003cbr\/\u003e\u003cbr\/\u003eRemote on\/off:\u003cbr\/\u003eThe remote switch can be connected to the two-pole connector or between the battery plus and left contact of the two-pole connector.\u003cbr\/\u003e\u003cbr\/\u003eLED diagnostics:\u003cbr\/\u003eThe status LEDs can be used to diagnose the device, see instructions for use.\u003cbr\/\u003e\u003cbr\/\u003eVictron Connect:\u003cbr\/\u003eThe VictronConnect application is used to monitor, control and configure the inverter. The app can be installed on a phone, tablet or computer. The app is available for Android, iOS, Windows and macOS. The app communicates either via Bluetooth or via a USB interface with the VE.Direct port.\u003cbr\/\u003e\u003cbr\/\u003e\u003cbr\/\u003eTechnical parameters:\u003cbr\/\u003e\u003cbr\/\u003e- 230 V AC +\/- 3% 50 Hz or 60 Hz +\/- 0.1%.\u003cbr\/\u003e- continuous power at 25 oC: 1200 VA \/ 1000 W\u003cbr\/\u003e- Peak power: 2200 W\u003cbr\/\u003e- max. efficiency: 91%\u003cbr\/\u003e- self-consumption at zero load: max 8 W\u003cbr\/\u003e- self-consumption in ECO mode: max 1.5 W\u003cbr\/\u003e- 230 V AC connection: Schuko (CEE 7\/4)\u003cbr\/\u003e- Operating temperature range: -40 to +65oC (fan-assisted cooling)\u003cbr\/\u003e- Humidity (non-condensing): max. 95%\u003cbr\/\u003e- Protection class: IP21\u003cbr\/\u003e- weight: 7.4 kg\u003cbr\/\u003e- Dimension: 117 x 232 x 327 mm\u003cbr\/\u003e\u003cbr\/\u003e","brand":"VICTRON ENERGY","offers":[{"title":"Default Title","offer_id":53159180763474,"sku":"04230483","price":7490.0,"currency_code":"CZK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0954\/9624\/1490\/files\/04230483_6a44892b-6282-4cbd-91a9-cf77480cdc98.png?v=1776933984"},{"product_id":"menic-napeti-victron-energy-1600va-24v-smart","title":"Victron Energy 1600VA 24V Smart Voltage Converter","description":"The converter contains a robust toroidal transformer that has demonstrated its reliability in Victron Energy's transducers for many years. The transducers are short-resistant and protected against overheating, whether due to overload or high ambient temperatures. This changer has built-in Bluetooth technology and is fully configurable with a tablet or smartphone. This is a completely unique function and therefore you have the ability to set the parameters of the changer and monitor the operation simply wirelessly. It provides the performance needed to run loads such as power changers for LED lamps, halide lamps or power tools.\u003cbr\/\u003e\u003cbr\/\u003eSettings options: \u003cbr\/\u003e- low voltage battery alarm \u003cbr\/\u003e- voltage level setting for switching off and restarting the inverter when the battery is low \u003cbr\/\u003e- dynamic disconnection from the battery when discharged: voltage level for disconnection is dependent on the load size \u003cbr\/\u003e- output voltage: 210 - 245V \u003cbr\/\u003e- frequency: 50 Hz or 60 Hz \u003cbr\/\u003e- ECO on\/off mode and ECO sensing level \u003cbr\/\u003e- alarm relays \u003cbr\/\u003e\u003cbr\/\u003eTechnical parameters: \u003cbr\/\u003e- sustained output power at 25°C (VA): 1600 \u003cbr\/\u003e- continuous active power at 25 °C \/ 40 °C (W):1300\/1200\u003cbr\/\u003e- peak active power (W): 3000 \u003cbr\/\u003e- weight (kg): 12 \u003cbr\/\u003e- dimensions in x w x h (mm): 485 x 219 x 125\u003cbr\/\u003e\u003cbr\/\u003e","brand":"VICTRON ENERGY","offers":[{"title":"Default Title","offer_id":53159211630930,"sku":"04230539","price":14590.0,"currency_code":"CZK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0954\/9624\/1490\/files\/04230539_fe8a9ac8-52da-4876-85fc-9f09fe652301.png?v=1776147306"},{"product_id":"menic-napeti-victron-energy-2000va-24v-smart","title":"Victron Energy 2000VA 24V Smart Voltage Converter","description":"Victron Energy 24V\/2000VA Smart inverter\u003cbr\/\u003eTeljesen programozható 24V\/2000VA inverter tiszta szinuszhullámmal, beépített Bluetooth Smart, vezeték nélküli beállítás és ECO üzemmód.\u003cbr\/\u003eA Victron Energy Smart feszültségátalakító egy hatékony és megbízható feszültségátalakító, amely egy bevált és terepen tesztelt inverter platformra épül, de új kialakítású, teljesen fém házzal. Elég nagy teljesítményű ahhoz, hogy a legtöbb gyakori készüléket táplálja autóban, hajón, lakóautóban vagy otthon. A toroid transzformátor nagy csúcsteljesítményű túlfeszültséget, stabil feszültséget, frekvenciát és kiváló minőségű szinuszhullámot biztosít.\u003cbr\/\u003e\u003cbr\/\u003e\u003cbr\/\u003eTermékparaméterek:\u003cbr\/\u003e\u003cbr\/\u003eKönnyen hozzáférhető csatlakozók:\u003cbr\/\u003eA telepítés könnyebb, mint valaha, mivel a terminálok most jobban hozzáférhetők a telepítő számára.\u003cbr\/\u003e\u003cbr\/\u003eBeépített Bluetooth:\u003cbr\/\u003eTeljesen konfigurálható tableten vagy okostelefonon keresztül, konfigurálja a riasztásokat, riasztási reléket, feszültségmegszakításokat, kimeneti feszültséget, frekvenciát, eco-módot és még sok mást közvetlenül a VictronConnect alkalmazásból.\u003cbr\/\u003e- Alacsony akkumulátor-feszültség riasztás\u003cbr\/\u003e- Alacsony akkumulátor leállási és újraindítási szintek\u003cbr\/\u003e- Dinamikus kikapcsolás: terhelésfüggő kikapcsolási szint\u003cbr\/\u003e- Kimeneti feszültség: 230 VAC ±2%\u003cbr\/\u003e- Frekvencia: 50 Hz vagy 60 Hz\u003cbr\/\u003e- ECO üzemmód be\/ki és ECO üzemmód érzékelési szintje\u003cbr\/\u003e- riasztási relé\u003cbr\/\u003e- felügyelet: bemeneti és kimeneti feszültség, terhelés és riasztások\u003cbr\/\u003e\u003cbr\/\u003eVE.Direct:\u003cbr\/\u003eDirect port segítségével csatlakoztathatja számítógéphez (VE.Direct-USB-csatlakozókábel szükséges), és ugyanazokat a paramétereket konfigurálhatja és felügyelheti.\u003cbr\/\u003e\u003cbr\/\u003eBizonyított megbízhatóság:\u003cbr\/\u003eA teljes híd és a toroid transzformátor topológia hosszú évek óta bizonyította megbízhatóságát. Az inverterek rövidzárlatbiztosak és túlmelegedés ellen védettek, akár túlterhelés, akár magas környezeti hőmérséklet miatt.\u003cbr\/\u003e\u003cbr\/\u003eMagas indítási teljesítmény:\u003cbr\/\u003eOlyan terhelések indításához szükséges, mint a LED-izzók, halogén izzók, hűtőszekrények vagy elektromos szerszámok inverterei.\u003cbr\/\u003e\u003cbr\/\u003eECO üzemmód:\u003cbr\/\u003eECO üzemmódban az inverter készenléti üzemmódba kapcsol, amikor a terhelés egy előre beállított érték alá csökken. Készenléti üzemmódban az inverter 2,5 másodpercenként rövid időre bekapcsol (állítható). Ha a terhelés meghaladja az előre beállított értéket, az inverter bekapcsolva marad.\u003cbr\/\u003e\u003cbr\/\u003eTávoli be\/ki kapcsolás:\u003cbr\/\u003eA kétpólusú csatlakozóhoz távkapcsoló vagy reléérintkező csatlakoztatható. Alternatívaként a kétpólusú csatlakozó H csatlakozója (balra) az akkumulátor pluszra, vagy a kétpólusú csatlakozó L csatlakozója (jobbra) az akkumulátor mínuszra kapcsolható.\u003cbr\/\u003e\u003cbr\/\u003eLED diagnosztika:\u003cbr\/\u003eAz állapotjelző LED-ek segítségével diagnosztizálható a készülék, lásd a használati útmutatót.\u003cbr\/\u003e\u003cbr\/\u003eVictron Connect:\u003cbr\/\u003eA VictronConnect alkalmazás az inverter felügyeletére, vezérlésére és konfigurálására szolgál. Az alkalmazás telepíthető telefonra, táblagépre vagy számítógépre. Az alkalmazás elérhető Android, iOS, Windows és macOS rendszerekre. Az alkalmazás Bluetooth-on keresztül vagy a VE.Direct porton keresztül USB interfészen keresztül kommunikál.\u003cbr\/\u003e\u003cbr\/\u003e\u003cbr\/\u003eMűszaki paraméterek:\u003cbr\/\u003e\u003cbr\/\u003e- Kimeneti feszültség: 230 V AC ± 2% 50 Hz vagy 60 Hz ± 0,1%.\u003cbr\/\u003e- folyamatos teljesítmény 25 oC-on: 2000 VA \/ 1600 W\u003cbr\/\u003e- Csúcsteljesítmény: 4000 W\u003cbr\/\u003e- max. hatásfok: 94 %\u003cbr\/\u003e- önfogyasztás nulla terhelésnél: max. 9 W\u003cbr\/\u003e- önfogyasztás nulla terhelésnél ECO üzemmódban: max. 1,3 W\u003cbr\/\u003e- 230 V AC csatlakozás: csavaros csatlakozók\u003cbr\/\u003e- Működési hőmérséklet-tartomány: -40 és +65 oC között (ventilátoros hűtés)\u003cbr\/\u003e- Páratartalom (nem kondenzálódó): max. 95 %\u003cbr\/\u003e- védelmi osztály: IP21\u003cbr\/\u003e- súly: 13 kg\u003cbr\/\u003e- Méret: 485 x 219 x 125 mm","brand":"VICTRON ENERGY","offers":[{"title":"Default Title","offer_id":53159211729234,"sku":"04230540","price":16900.0,"currency_code":"CZK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0954\/9624\/1490\/files\/04230540_07ad9d84-9522-4130-b72a-cfaafbfa0965.png?v=1776147307"},{"product_id":"menic-napeti-victron-energy-3000va-24v-smart","title":"Victron Energy 3000VA 24V Smart voltage converter","description":"Victron Energy 24V\/2000VA Smart inverter\u003cbr\/\u003eFully programmable 24V\/2000VA inverter with pure sine wave, built-in Bluetooth Smart, wireless setup and ECO mode.\u003cbr\/\u003eThe Victron Energy Smart voltage converter is an efficient and reliable voltage converter built on a proven and field-tested inverter platform, but in a new design with an all-metal housing. It is powerful enough to power most common appliances in a car, boat, RV or home. The toroidal transformer provides high peak power surge capacity, stable voltage, frequency and high quality sine wave.\u003cbr\/\u003e\u003cbr\/\u003e\u003cbr\/\u003eProduct Parameters:\u003cbr\/\u003e\u003cbr\/\u003eEasily accessible terminals:\u003cbr\/\u003eInstallation is easier than ever because the terminals are now more accessible to the installer.\u003cbr\/\u003e\u003cbr\/\u003eBuilt-in Bluetooth:\u003cbr\/\u003eFully configurable via tablet or smartphone, configure alarms, alarm relays, voltage interrupts, output voltage, frequency, eco-mode and more directly from the app from VictronConnect.\u003cbr\/\u003e- Low battery voltage alarm\u003cbr\/\u003e- Low battery shutdown and restart levels\u003cbr\/\u003e- Dynamic shutdown: load-dependent shutdown level\u003cbr\/\u003e- output voltage: 230 VAC ±2%\u003cbr\/\u003e- Frequency: 50 Hz or 60 Hz\u003cbr\/\u003e- ECO mode on\/off and ECO mode sensing level\u003cbr\/\u003e- alarm relay\u003cbr\/\u003e- monitoring: input and output voltage, load and alarms\u003cbr\/\u003e\u003cbr\/\u003eVE.Direct:\u003cbr\/\u003eUsing the VE.Direct port, you can connect to a computer (VE.Direct to USB interface cable required) and configure and monitor the same parameters.\u003cbr\/\u003e\u003cbr\/\u003eProven reliability:\u003cbr\/\u003eThe full bridge and toroidal transformer topology has proven its reliability over many years. The inverters are short-circuit proof and protected against overheating, whether due to overload or high ambient temperature.\u003cbr\/\u003e\u003cbr\/\u003eHigh starting performance:\u003cbr\/\u003eRequired to start loads such as inverters for LED bulbs, halogen bulbs, refrigerators or power tools.\u003cbr\/\u003e\u003cbr\/\u003eECO mode:\u003cbr\/\u003eIn ECO mode, the inverter switches to standby mode when the load drops below a preset value. In standby mode, the inverter turns on for a short period of time every 2.5 seconds (adjustable). If the load exceeds the preset level, the inverter will remain on.\u003cbr\/\u003e\u003cbr\/\u003eRemote on\/off:\u003cbr\/\u003eA remote switch or relay contact can be connected to the two-pole connector. Alternatively, the H terminal (left) of the two-pole connector can be switched to battery plus or the L terminal (right) of the two-pole connector can be switched to battery minus.\u003cbr\/\u003e\u003cbr\/\u003eLED diagnostics:\u003cbr\/\u003eThe status LEDs can be used to diagnose the device, see the instruction manual.\u003cbr\/\u003e\u003cbr\/\u003eVictron Connect:\u003cbr\/\u003eThe VictronConnect application is used to monitor, control and configure the inverter. The app can be installed on a phone, tablet or computer. The app is available for Android, iOS, Windows and macOS. The app communicates either via Bluetooth or via a USB interface with the VE.Direct port.\u003cbr\/\u003e\u003cbr\/\u003e\u003cbr\/\u003eTechnical parameters:\u003cbr\/\u003e- Output voltage: 230 V AC ± 2% 50 Hz or 60 Hz ± 0.1%.\u003cbr\/\u003e- continuous power at 25 oC: 2000 VA \/ 1600 W\u003cbr\/\u003e- Peak power: 4000 W\u003cbr\/\u003e- max. efficiency: 94 %\u003cbr\/\u003e- self-consumption at zero load: max. 9 W\u003cbr\/\u003e- self-consumption at zero load in ECO mode: max. 1.3 W\u003cbr\/\u003e- 230 V AC connection: screw terminals\u003cbr\/\u003e- Operating temperature range: -40 to +65oC (fan-assisted cooling)\u003cbr\/\u003e- Humidity (non-condensing): max. 95%\u003cbr\/\u003e- protection class: IP21\u003cbr\/\u003e- weight: 13 kg\u003cbr\/\u003e- Dimension: 485 x 219 x 125 mm","brand":"VICTRON ENERGY","offers":[{"title":"Default Title","offer_id":53159335559506,"sku":"04230541","price":23590.0,"currency_code":"CZK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0954\/9624\/1490\/files\/04230541_e64dddde-a76d-4205-8d10-091057086d34.png?v=1776147308"},{"product_id":"menic-napeti-victron-energy-sun-inverter-12v-250a-15-iec","title":"Victron Energy Sun Inverter 12V\/250A-15 IEC","description":"The Victron Energy voltage converter is an efficient and reliable voltage converter built on a proven and field-tested platform. The inverter incorporates a robust toroidal transformer that has proven its reliability in Victron Energy inverters for many years.\u003cbr\/\u003e\u003cbr\/\u003eKey Features:\u003cbr\/\u003e\u003cbr\/\u003eHigh starting power:\u003cbr\/\u003eRequired to start loads such as inverters for LED bulbs, halogen lamps or power tools.\u003cbr\/\u003e\u003cbr\/\u003eECO mode:\u003cbr\/\u003eIn ECO mode, the inverter switches to standby mode when the load falls below a preset value (min. load: 15 W). Once in standby mode, the inverter will switch on for a short period of time (adjustable, default: every 2.5 seconds). If the load exceeds the preset level, the inverter will remain on.\u003cbr\/\u003e\u003cbr\/\u003ePWM solar charger:\u003cbr\/\u003eThe solar charger provides battery charging with energy obtained from your solar panels. The charging algorithm is programmable.\u003cbr\/\u003e\u003cbr\/\u003eRemote on\/off:\u003cbr\/\u003eThe Phoenix Inverter Control VE.Direct Remote panel (not included) can be used to turn the inverter on or off remotely. Alternatively, the remote switch can be plugged into the two-pole connector or between the battery plus and the left contact of the two-pole connector.\u003cbr\/\u003e\u003cbr\/\u003eLED diagnostics:\u003cbr\/\u003ePlease refer to the manual for a description of each condition.\u003cbr\/\u003e\u003cbr\/\u003eBluetooth:\u003cbr\/\u003eInverter and solar charger parameters can be read, monitored and configured via Bluetooth\u003cbr\/\u003eVictronConnect app.\u003cbr\/\u003e\u003cbr\/\u003eVE.Direct communication port:\u003cbr\/\u003eThe VE.Direct port can be used to connect to a GX device, GlobalLink 520 for monitoring through the VRM portal or to connect to a computer for monitoring or configuration using the VictronConnect app.\u003cbr\/\u003e\u003cbr\/\u003eMonitoring via the VictronConnect app or GX device:\u003cbr\/\u003e\u003cbr\/\u003eInverter input and output voltages and % load\u003cbr\/\u003eSolar energy, voltage and current\u003cbr\/\u003eOperating status and alarms\u003cbr\/\u003eFully configurable via the VictronConnect app:\u003cbr\/\u003e\u003cbr\/\u003eLow battery voltage alarm triggering and level reset\u003cbr\/\u003eLow battery shutdown and restart levels\u003cbr\/\u003eDynamic shutdown: load-dependent shutdown levels\u003cbr\/\u003eOutput voltage 210 - 245 V and frequency 50 Hz or 60 Hz\u003cbr\/\u003eECO mode on\/off and ECO mode sensing level\u003cbr\/\u003eBattery charging current, algorithm and voltage\u003cbr\/\u003eTemperature compensation for battery charging or low temperature level reduction\u003cbr\/\u003eLoad transfer to another AC power source: automatic transfer switch:\u003cbr\/\u003eFor our low power inverters, we recommend our Filax automatic transfer switch. Filax features a very short switching time (less than 20 milliseconds), so computers and other electronic devices yes\u003cbr\/\u003econtinue to operate without interruption.\u003cbr\/\u003e\u003cbr\/\u003eDC and PV connections with screw terminals:\u003cbr\/\u003eNo special cable terminals or tools are required for installation\u003cbr\/\u003e\u003cbr\/\u003eAvailable with IEC-320 socket:\u003cbr\/\u003eIEC-320 plug included.\u003cbr\/\u003e\u003cbr\/\u003eSpecifications:\u003cbr\/\u003e\u003cbr\/\u003e230 V AC +\/- 3% 50 Hz or 60 Hz +\/- 0.1%.\u003cbr\/\u003econtinuous power at 25 oC: 250 VA \/ 200 W\u003cbr\/\u003ePeak power: 400 W\u003cbr\/\u003emax. efficiency: 87%\u003cbr\/\u003eself-consumption at zero load: max 4.2 W\u003cbr\/\u003eself-consumption in ECO mode: max 0.8 W\u003cbr\/\u003e230 V AC connection: IEC-320 plug\u003cbr\/\u003eOperating temperature range: -40 to +60 oC (fan-assisted cooling)\u003cbr\/\u003eHumidity (non-condensing): max. 95%\u003cbr\/\u003eProtection class: IP21\u003cbr\/\u003eweight: 2.4 kg\u003cbr\/\u003eDimension: 86 x 165 x 260 mm","brand":"VICTRON ENERGY","offers":[{"title":"Default Title","offer_id":53196843549010,"sku":"04230709","price":2590.0,"currency_code":"CZK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0954\/9624\/1490\/files\/04230709_093fe250-efa8-4a23-9f94-aa1d67c4a6a9.png?v=1776934020"},{"product_id":"menic-napeti-victron-energy-sun-inverter-24v-250va-10-iec","title":"Victron Energy Sun Inverter 24V\/250 VA-10 IEC power inverter","description":"Měnič napětí Victron Energy je účinný a spolehlivý měnič napětí postaven na osvědčené a v praxi otestované platformě. Měnič obsahuje robustní toroidní transformátor, který prokazuje svou spolehlivost v měničích Victron Energy po mnoho let. \u003cbr\u003e\u003cbr\u003eHlavní vlastnosti:\u003cbr\u003e\u003cbr\u003eVysoký startovací výkon:\u003cbr\u003ePotřebné ke spuštění zátěží, jako jsou měniče pro LED žárovky, halogenové žárovky nebo elektrické nářadí.\u003cbr\u003e\u003cbr\u003eECO režim:\u003cbr\u003eV režimu ECO se střídač přepne do pohotovostního režimu, když zatížení klesne pod předem nastavenou hodnotu (min. zátěž: 15 W). Jakmile je střídač v pohotovostním režimu, na krátkou dobu se zapne (nastavitelné, výchozí: každých 2,5 sekundy). Pokud zátěž překročí přednastavenou úroveň, střídač zůstane zapnutý.\u003cbr\u003e\u003cbr\u003ePWM solární nabíječka:\u003cbr\u003eSolární nabíječka zajišťuje nabíjení baterií energií získanou z vašich solárních panelů. Nabíjecí algoritmus je programovatelný.\u003cbr\u003e\u003cbr\u003eDálkové zapnutí\/vypnutí:\u003cbr\u003ePanel Phoenix Inverter Control VE.Direct Remote (není součástí dodávky) lze použít k zapnutí měniče popř. vzdáleně vypnout. Alternativně lze dálkový vypínač zapojit do dvoupólového konektoru nebo mezi něj baterie plus a levý kontakt dvoupólového konektoru.\u003cbr\u003e\u003cbr\u003eLED diagnostika:\u003cbr\u003ePopis jednotlivých stavů naleznete v příručce.\u003cbr\u003e\u003cbr\u003eBluetooth:\u003cbr\u003eParametry střídače a solární nabíječky lze číst, monitorovat a konfigurovat pomocí Bluetooth v aplikaci VictronConnect.\u003cbr\u003e\u003cbr\u003eVE.Přímý komunikační port:\u003cbr\u003ePort VE.Direct lze použít pro připojení k zařízení GX, GlobalLink 520 pro monitorování prostřednictvím VRM portálu nebo pro připojení k počítači pro monitorování nebo konfiguraci pomocí aplikace VictronConnect.\u003cbr\u003e\u003cbr\u003eMonitorování prostřednictvím aplikace VictronConnect nebo zařízení GX:\u003cbr\u003eVstupní a výstupní napětí invertoru a % zatížení\u003cbr\u003eSolární energie, napětí a proud\u003cbr\u003eProvozní stav a alarmy\u003cbr\u003ePlně konfigurovatelné prostřednictvím aplikace VictronConnect:\u003cbr\u003e\u003cbr\u003eSpuštění alarmu nízkého napětí baterie a resetování úrovní\u003cbr\u003eÚrovně vypnutí a restartu při nízkém napětí baterie\u003cbr\u003eDynamické vypínání: úroveň vypínání závislá na zatížení\u003cbr\u003eVýstupní napětí 210 – 245 V a frekvence 50 Hz nebo 60 Hz\u003cbr\u003eZapnutí\/vypnutí režimu ECO a úroveň snímání režimu ECO\u003cbr\u003eNabíjecí proud baterie, algoritmus a napětí\u003cbr\u003eTeplotní kompenzace nabíjení baterie nebo snížení úrovně nízké teploty\u003cbr\u003ePřevedení zátěže na jiný zdroj střídavého proudu: \u003cbr\u003epřepínač automatického přenosu\u003cbr\u003ePro naše střídače s nízkým výkonem doporučujeme náš automatický převodový spínač Filax. Filax se vyznačuje velmi krátká doba přepnutí (méně než 20 milisekund), takže počítače a další elektronická zařízení pokračovat v provozu bez přerušení.\u003cbr\u003e\u003cbr\u003eDC a PV připojení se šroubovými svorkami:\u003cbr\u003eK instalaci nejsou potřeba žádné speciální kabelové koncovky ani nástroje\u003cbr\u003e\u003cbr\u003eK dispozici se zásuvkou IEC-320:\u003cbr\u003eSoučástí dodávky je zástrčka IEC-320.\u003cbr\u003e\u003cbr\u003eTechnické parametry:\u003cbr\u003e\u003cbr\u003evýstupní napětí: 230 V AC +\/- 3% 50 Hz nebo 60 Hz +\/- 0,1%\u003cbr\u003etrvalý výkon při 25 oC: 250 VA \/ 200 W\u003cbr\u003ešpičkový výkon: 400 W\u003cbr\u003emax. účinnost: 88 %\u003cbr\u003evlastní spotřeba při nulovém zatížení: max 5,2 W\u003cbr\u003evlastní spotřeba v režimu ECO: max 1,3 W\u003cbr\u003epřipojení 230 V AC: zástrčka IEC-320\u003cbr\u003erozpětí provozních teplot: -40 až +60 oC (ventilátorem podporované chlazení)\u003cbr\u003evlhkost (nekondenzující): max. 95%\u003cbr\u003etřída ochrany: IP21\u003cbr\u003ehmotnost: 2,4 kg\u003cbr\u003erozměr: 86 x 165 x 260 mm","brand":"VICTRON ENERGY","offers":[{"title":"Default Title","offer_id":53196844138834,"sku":"04230711","price":2590.0,"currency_code":"CZK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0954\/9624\/1490\/files\/04230711_ef2174f1-c5c2-4905-a4a5-0470b1295537.png?v=1776934046"},{"product_id":"menic-napeti-victron-energy-12v-1600va-ve-direct","title":"Voltage converter Victron Energy 12V\/1600VA VE.Direct","description":"The Victron Energy voltage converter is an efficient and reliable voltage converter built on a proven and field-tested platform. The inverter incorporates a robust toroidal transformer that has proven its reliability in Victron Energy inverters for many years.\u003cbr\/\u003e\u003cbr\/\u003eKey Features:\u003cbr\/\u003e\u003cbr\/\u003eEasily accessible terminals:\u003cbr\/\u003eInstallation is easier than ever because the terminals are now more accessible to the installer.\u003cbr\/\u003e\u003cbr\/\u003eVE.Direct:\u003cbr\/\u003e\u003cbr\/\u003eThe VE.Direct port can be connected to:\u003cbr\/\u003e\u003cbr\/\u003eComputer (VE.Direct to USB interface cable required)\u003cbr\/\u003eSmartphones, tablets, MacBooks and other Apple and Android devices (VE.Direct Bluetooth Smart dongle required)\u003cbr\/\u003eFully configurable:\u003cbr\/\u003e\u003cbr\/\u003eLow battery alarm triggering and level reset\u003cbr\/\u003eLow battery shutdown and restart levels\u003cbr\/\u003eDynamic shutdown: load-dependent shutdown levels\u003cbr\/\u003eOutput voltage 210 - 245 V\u003cbr\/\u003eFrequency 50 Hz or 60 Hz\u003cbr\/\u003eECO mode on\/off and ECO mode sensing level\u003cbr\/\u003eMonitoring:\u003cbr\/\u003e\u003cbr\/\u003eInput and output voltages, % load and alarms\u003cbr\/\u003eProven reliability:\u003cbr\/\u003eThe full bridge and toroidal transformer topology has proven its reliability over many years. The inverters are short-circuit proof and protected against overheating, whether due to overload or high ambient temperature.\u003cbr\/\u003e\u003cbr\/\u003eHigh starting performance:\u003cbr\/\u003eRequired to start loads such as inverters for LED bulbs, halogen bulbs, refrigerators or power tools.\u003cbr\/\u003e\u003cbr\/\u003eECO mode:\u003cbr\/\u003eIn ECO mode, the inverter switches to standby mode when the load drops below a preset value. In standby mode, the inverter turns on for a short period of time every 2.5 seconds (adjustable). If the load exceeds the preset level, the inverter will remain on.\u003cbr\/\u003e\u003cbr\/\u003eRemote on\/off:\u003cbr\/\u003eThe remote switch can be connected to the two-pole connector or between the battery plus and left contact of the two-pole connector.\u003cbr\/\u003e\u003cbr\/\u003eLED diagnostics:\u003cbr\/\u003eThe status LEDs can be used to diagnose the device, see instructions for use.\u003cbr\/\u003e\u003cbr\/\u003eVictron Connect:\u003cbr\/\u003eThe VictronConnect application is used to monitor, control and configure the inverter. The app can be installed on a phone, tablet or computer. The app is available for Android, iOS, Windows and macOS. The app communicates either via Bluetooth or via a USB interface with the VE.Direct port.\u003cbr\/\u003e\u003cbr\/\u003eTechnical parameters:\u003cbr\/\u003e\u003cbr\/\u003eOutput voltage: 230 V AC ± 2% 50 Hz or 60 Hz ± 0.1%.\u003cbr\/\u003econtinuous power at 25 oC: 1600 VA \/ 1300 W\u003cbr\/\u003ePeak power: 2200 W\u003cbr\/\u003emax. efficiency: 92 %\u003cbr\/\u003eself-consumption at zero load: max. 8 W\u003cbr\/\u003eself-consumption at zero load in ECO mode: max. 0.6 W\u003cbr\/\u003e230 V AC connection: screw terminals\u003cbr\/\u003eOperating temperature range: -40 to +65oC (fan-assisted cooling)\u003cbr\/\u003eHumidity (non-condensing): max. 95%\u003cbr\/\u003eprotection class: IP21\u003cbr\/\u003eweight: 8.86 kg\u003cbr\/\u003eDimension: 190 x 425 x 285 mm","brand":"VICTRON ENERGY","offers":[{"title":"Default Title","offer_id":53244045623634,"sku":"04230710","price":7680.0,"currency_code":"CZK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0954\/9624\/1490\/files\/04230710_c230d003-dc05-4139-ad7a-ef20c56d7c2e.png?v=1776934032"},{"product_id":"stridac-hybridni-deye-sun-10k-sg01hp3-eu-am2-10kw-3f-hv-eg-d-certifikovano-rozbaleno","title":"DEYE SUN-10K-SG01HP3-EU-AM2 10 kW 3-phase hybrid inverter – unboxed","description":"A SUN 5\/6\/8\/10\/10\/12\/15\/20\/25K-SG01HP3-EU-AM2 egy vadonatúj sorozat háromfázisú hibrid inverter, amely támogatja a 160-700V HV akkumulátort, és biztosítja a rendszer nagyobb hatékonyságát és alacsonyabb hulladékhő-termelést. Kompakt, kifinomult kialakításának és első osztályú technológiájának köszönhetően ez a sorozat az inverter névleges teljesítményéhez képest (DC\/AC arány = 1,3) akár 30%-kal is képes meghaladni a PV-rendszer teljesítményét. Így nem kell mindig a PV-rendszerhez illeszkedő modellt választani, ami megtakarítást jelent a telepítési költségekben. A háromfázisú aszimmetrikus kimenetet 150%-ig támogatja, így a lehető legszélesebb körben alkalmazható a különböző körülmények között. A színes LCD-kijelző felhasználóbarát felületet biztosít az áttekintéshez és a rendszer konfigurálásához (akkumulátor-kezelés, AC\/szolár töltés a különböző alkalmazásoktól függően stb.). Ennek az inverternek a legnagyobb előnye az állítható \"intelligens terhelés\" bemenet\/kimenet, amelyre generátor, string inverter vagy vízmelegítéshez fűtőbetét csatlakoztatható. Ennek a portnak a képességei hasonló funkciókat kínálnak, mint egy wattrouter.\u003cbr\/\u003e\u003cbr\/\u003eEzt az invertert az EG.D a.s. laboratóriuma sikeresen tanúsította, és a 2025. január 1-jétől érvényes szabályok szerint a Cseh Köztársaságban állandó jelleggel csatlakoztatható az elosztóhálózathoz.\u003cbr\/\u003e\u003cbr\/\u003eFőbb paraméterek\u003cbr\/\u003e\u003cbr\/\u003eNagyfeszültségű kialakítás a nagyobb hatékonyság érdekében\u003cbr\/\u003e3 fázisú aszimmetrikus kimenet\u003cbr\/\u003eKét MPPT követő\u003cbr\/\u003eKét string bemenet (4 csatlakozó)\u003cbr\/\u003eMPPT működési feszültség 150 - 850V\u003cbr\/\u003eIntelligens felügyeleti platform\u003cbr\/\u003eEgyedülálló funkciók Intelligens terhelés, hálózati csúcsterhelés, fáziskiegyenlítés\u003cbr\/\u003eAkár 10 párhuzamos egység is csatlakoztatható\u003cbr\/\u003e6 időablak a töltéshez és a kisütéshez\u003cbr\/\u003e\u003cbr\/\u003eEz a készülék szerepel az Új Zöld Megtakarítási Program terméklistáján (SVT35009)\u003cbr\/\u003e\u003cbr\/\u003e\u003cbr\/\u003eMűszaki paraméterek\u003cbr\/\u003e\u003cbr\/\u003eAkkumulátor\u003cbr\/\u003eAkkumulátor típusa: lítium-ion\u003cbr\/\u003eAz akkumulátor feszültsége: 160 - 700 VDC\u003cbr\/\u003eMax. töltési áram: 37 A\u003cbr\/\u003eMax. kisütési áram: 37 A\u003cbr\/\u003eAz akkumulátor bemenetek száma: 1\u003cbr\/\u003e\u003cbr\/\u003ePV bemenet\u003cbr\/\u003eMax. 13000 W\u003cbr\/\u003eMax. Egyenfeszültség: 1000 V\u003cbr\/\u003eIndítási feszültség: 180 V\u003cbr\/\u003eMax. bemeneti rövidzárlati áram: 30 + 30 A\u003cbr\/\u003eMax. bemeneti üzemi áram: 20 + 20 A\u003cbr\/\u003e\u003cbr\/\u003eAC bemenet\/kimenet\u003cbr\/\u003eNévleges aktív teljesítmény: 10000 W\u003cbr\/\u003eNévleges meddő teljesítmény: 11000 VA\u003cbr\/\u003eMax. túlterhelés: a névleges teljesítmény 1,5x-szerese 10s után\u003cbr\/\u003eNévleges feszültség: 220\/380V, 230\/400V\u003cbr\/\u003e3L + N + PE\u003cbr\/\u003eHálózati frekvencia: 45-65 Hz\u003cbr\/\u003e\u003cbr\/\u003eHatékonyság\u003cbr\/\u003eMax. hatásfok: 97,6%\u003cbr\/\u003eEURO hatásfok: 97 %\u003cbr\/\u003eMPPT hatásfok: \u003e99 %\u003cbr\/\u003e\u003cbr\/\u003eVédelmi funkció\u003cbr\/\u003eDC fordított polaritás\u003cbr\/\u003eAC túlterhelési áram\u003cbr\/\u003eAC túlfeszültség\u003cbr\/\u003eAC kimeneti rövidzárlat\u003cbr\/\u003eDC komponens érzékelése AC kimeneten\u003cbr\/\u003eTúlfeszültség gyors terheléscsökkenéskor\u003cbr\/\u003eSzivárgási áram érzékelése a PE-ben\u003cbr\/\u003eÍvvédelmi megszakító\u003cbr\/\u003eÁramhálózati felügyelet\u003cbr\/\u003eSzigetelkülönítési funkció\u003cbr\/\u003eFöldzárlat-érzékelés\u003cbr\/\u003eDC bemeneti kapcsoló\u003cbr\/\u003eDC terminál ellenállás érzékelés\u003cbr\/\u003eFennmaradó áramú eszköz (RCD)\u003cbr\/\u003eTúlmelegedés\u003cbr\/\u003eTúlfeszültség-csúcsok\u003cbr\/\u003eTúlfeszültségvédelmi osztály: II. típus (AC), II. típus (DC)\u003cbr\/\u003e\u003cbr\/\u003eEgyéb paraméterek\u003cbr\/\u003eÜzemi hőmérséklet: -40°C és +60°C között\u003cbr\/\u003ePáratartalom: 0-100%\u003cbr\/\u003eMaximális tengerszint feletti magasság: 2000 m\u003cbr\/\u003eZajszint: ? 55 dB\u003cbr\/\u003eHűtés: aktív, intelligens vezérlésű\u003cbr\/\u003eTopológia: nem szigetelt\u003cbr\/\u003eHálózati szabványok: IEC 61727,IEC 62116,CEI 0-21,EN 50549,NRS 097,RD 140,UNE 217002,OVE-Richtlinie R25,G99,VDE-AR-N 4105\u003cbr\/\u003eBiztonsági szabványok: IEC\/EN 61000-6-6-1\/2\/3\/4, IEC\/EN 62109-1, IEC\/EN 62109-2.\u003cbr\/\u003eTúlfeszültség-védelmi osztály: OVC II (DC), OVC III (AC)\u003cbr\/\u003eMéretek: 408 x 638 x 237 mm (csatlakozók és konzolok nélkül)\u003cbr\/\u003eSúly: 30,5 kg\u003cbr\/\u003eVédettségi fok: IP65\u003cbr\/\u003e\u003cbr\/\u003e","brand":"DEYE","offers":[{"title":"Default Title","offer_id":53337677594962,"sku":"90330021","price":33399.0,"currency_code":"CZK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0954\/9624\/1490\/files\/90330021.jpg?v=1786426865"},{"product_id":"stridac-hybridni-deye-sun-15k-sg05lp3-eu-sm2-15kw-3f-lv-5-generace","title":"Hybrid inverter DEYE SUN-15K-SG05LP3-EU-SM2, 15kW, 3F, LV 5th generation","description":"The versatile Deye SUN-15K 5th generation low voltage 3-phase hybrid inverter with wall mount combines a solar inverter and battery charger. It supports asymmetrical 3-phase output with a range of 0 to 7.5 kW on each phase, with the ability to overload by 100% for 10 seconds, expanding application scenarios to the absolute maximum. The inverter is compatible with low voltage 40 to 60V batteries. Communication with the BMS is via CAN or RS485 interface and is fully compatible with the latest models of other brands of batteries. The color LCD display provides a user-friendly interface for overview and system configuration (battery management, AC\/solar charging depending on different applications, etc.). The biggest advantage of this inverter is the adjustable \"smart load\" input\/output where you can connect a generator, string inverter, or heating cartridge for water heating. The capabilities of this port offer you to use similar functions as a wattrouter.\u003cbr\/\u003e\u003cbr\/\u003eKey Features\u003cbr\/\u003eSupports 3-phase unbalanced output\u003cbr\/\u003eNumber of MPP Trackers: 2 inputs (2+2)\u003cbr\/\u003eMPPT voltage range: 160 to 650 V\u003cbr\/\u003eHigh charging and discharging current: 280 A\u003cbr\/\u003eCommunication interfaces: CAN\/RS-485 (for BMS), Modbus (RTU 485 for Loxone, for example, or external control system), RS-232 (for cloud dongle)\u003cbr\/\u003eSolarman intelligent monitoring platform for the management of photovoltaic power plants. Can be equipped with a communication interface via Wi-Fi (included), Ethernet, or LTE.\u003cbr\/\u003eUnique features Smart Load, Grid peak shaving, phase balancing\u003cbr\/\u003eIP65 degree of protection\u003cbr\/\u003eAnti-PID function","brand":"DEYE","offers":[{"title":"Default Title","offer_id":53341352165714,"sku":"04230713","price":54599.0,"currency_code":"CZK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0954\/9624\/1490\/files\/04230713.jpg?v=1777972129"},{"product_id":"stridac-hybridni-deye-sun-20k-sg05lp3-eu-sm2-20kw-3f-lv-5-generace","title":"Hybrid inverter DEYE SUN-20K-SG05LP3-EU-SM2, 20kW, 3F, LV 5th generation","description":"The versatile Deye SUN-20K 5th generation low voltage 3-phase hybrid inverter with wall mount combines a solar inverter and battery charger. It supports asymmetrical 3-phase output with a range of 0 to 10 kW on each phase, with the ability to overload by 100% for 10 seconds, expanding application scenarios to the absolute maximum. The inverter is compatible with low voltage 40 to 60V batteries. Communication with the BMS is via CAN or RS485 interface and is fully compatible with the latest models of other brands of batteries. The color LCD display provides a user-friendly interface for overview and system configuration (battery management, AC\/solar charging depending on different applications, etc.). The biggest advantage of this inverter is the adjustable \"smart load\" input\/output where you can connect a generator, string inverter, or heating cartridge for water heating. The capabilities of this port offer you to use similar functions as a wattrouter.\u003cbr\/\u003e\u003cbr\/\u003eSupports 3-phase unbalanced output\u003cbr\/\u003eNumber of MPP Trackers: 2 inputs (2+2)\u003cbr\/\u003eMPPT voltage range: 160 to 650 V\u003cbr\/\u003eHigh charging and discharging current: 350 A\u003cbr\/\u003eCommunication interfaces: CAN\/RS-485 (for BMS), Modbus (RTU 485 for Loxone, for example, or external control system), RS-232 (for cloud dongle)\u003cbr\/\u003eSolarman intelligent monitoring platform for the management of photovoltaic power plants. Can be equipped with a communication interface via Wi-Fi (included), Ethernet, or LTE.\u003cbr\/\u003eUnique features Smart Load, Grid peak shaving, phase balancing\u003cbr\/\u003eIP65 degree of protection\u003cbr\/\u003eAnti-PID function","brand":"DEYE","offers":[{"title":"Default Title","offer_id":53341352264018,"sku":"04230712","price":72099.0,"currency_code":"CZK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0954\/9624\/1490\/files\/04230712.jpg?v=1777972113"},{"product_id":"mikroinvertor-800w-s-elektromerem","title":"800W micro-inverter with electricity meter","description":"The SPD series micro-inverter is a modern solution for the efficient use of energy from photovoltaic panels, featuring a function to limit power overflow into the distribution network. The system consists of a micro-inverter and a smart electricity meter, which monitors household consumption in real time and optimises energy production to prevent unwanted power feed-in. The micro-inverter converts direct current (DC) from the photovoltaic panels into alternating current (AC), which is compatible with the standard electricity grid. As it is equipped with an anti-islanding function, it immediately stops generating energy and isolates the voltage on the output cable in the event of its sudden disconnection from the socket or a power cut in the grid. This makes it completely safe for domestic use. Thanks to MPPT (Maximum Power Point Tracking) technology, the maximum output of each panel is ensured.  The system allows for detailed performance monitoring via the Smart Life (Tuya) mobile app, where you can track current generation, consumption and the status of the device, carry out firmware updates or limit the output power. With an IP67 rating, the micro-inverter is also suitable for outdoor installation and can withstand harsh weather conditions. Another advantage is its low-DC-voltage design, which enhances safety compared to conventional high-voltage string systems.\u003cbr\/\u003e\u003cbr\/\u003eImportant notice!\nThe installation of photovoltaic panels and any work on the electrical installation (including the installation of a smart meter) should only be carried out by a person with the appropriate electrical qualifications. The information in this description is provided for general technical guidance only and does not replace a professional inspection and assessment of the electrical installation. \u003cbr\/\u003e\u003cbr\/\u003eTo connect to the distribution network, you must notify the distribution network operator (ČEZ, PRE, EG.D) and comply with their requirements. Incorrect installation or failure to comply with applicable regulations may result in the risk of injury, damage to equipment or penalties. The seller accepts no liability for any damage or faults arising from incorrect installation, unauthorised tampering with the electrical installation, or failure to comply with applicable legal regulations.\n\nTechnical specifications\n- Rated power: 800 W\u003cbr\/\u003e- Input power (PV): up to 500 W per input \n- Number of MPPT inputs: 2 \n- MPPT voltage range: 16–60 V DC\n- Max. Voc voltage of panels: 60 V DC\u003cbr\/\u003e- Start-up voltage: 22 V DC \n- Max. input current: up to 2×18 A \n- Output voltage: 230 V AC (180–275 V) \u003cbr\/\u003e- Frequency: 50 Hz (60 Hz option available) \n- Efficiency: up to 96% (CEC up to 96.5%, MPPT 99.8%) \n- Power factor: \u003e 0.99 \u003cbr\/\u003e- THD: \u003c 3 % \n- Standby power consumption at night: \u003c 0.3 W\n- Protection rating: IP67 \n- Dimensions: 250 × 253 × 29 mm \n- Weight: 3.6 kg \u003cbr\/\u003e- Communication: Wi-Fi (2.4 GHz) \n- Cooling: passive (fanless) \n- Operating temperature: -40 °C to +60 °C \u003cbr\/\u003e\u003cbr\/\u003eSmart electricity meter (Wi-Fi\/RS485 Meter EM50S)\n- Voltage: 176–264 V AC \n- Current: 0–50 A \u003cbr\/\u003e- Measurement accuracy: ±1 per cent \n- Measured parameters: voltage, current, power, power factor, energy \n- Communication: Wi-Fi (range up to 50 m in open space) \u003cbr\/\u003e- Dimensions: 89 × 60 × 32 mm \n- Weight: approx. 100 g \n- Operating temperature: -30 °C to +75 °C \u003cbr\/\u003e\u003cbr\/\u003eProduct specifications\n- Device type: micro-inverter with over-feed protection\n- Application: photovoltaic systems (residential, balcony installations) \n- Installation: outdoor \/ indoor (IP67) \u003cbr\/\u003e- Monitoring: Smart Life (Tuya) mobile app for both the micro-inverter and the electricity meter\n\n- Functions: \n- grid over-feed protection \n-  monitoring of generation and consumption \n-  overheating protection (derating) \u003cbr\/\u003e- Protection against overvoltage, undervoltage and islanding \n- The electricity meter can be connected to the micro-inverter via the supplied cable for the RS485 interface or via Wi-Fi\n\n- Compatibility: standard PV panels with MC4 connectors \u003cbr\/\u003e- Connection: to the standard mains supply (socket \/ fixed connection) \u003cbr\/\u003e- Safety: low-voltage DC system, galvanic isolation \n- Certifications: CE, RoHS, EN standards for safety and EMC\n(EN62109-1\/-2, UL1741, IEC62477, IEEE 1547, EMC EN 61000-3-2\/-3, EN 61000-6-1\/-2\/-3\/-4, EN 301489-3\/-17)","brand":"TIPA","offers":[{"title":"Default Title","offer_id":53422608712018,"sku":"04230694","price":4699.0,"currency_code":"CZK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0954\/9624\/1490\/files\/04230694.jpg?v=1789562268"},{"product_id":"stridac-hybridni-20kw-sofar-hyd20ktl-3ph","title":"SOFARSOLAR HYD20KTL-3PH 20kW hybrid inverter","description":"A SOFARSOLAR HYD 20KTL-3PH egy kompakt, 3 fázisú hibrid inverter integrált MPPT vezérlővel és aszimmetrikus kimenettel. Alkalmas szigetüzemű, hálózati csatlakozás nélküli telepítésekhez is, vagy tipikus hálózaton lévő inverterként is használható. A névleges teljesítményének akár 200%-át elérő rövid távú túlterhelést is kibírja, és ezeket a csúcsokat a csatlakoztatott akkumulátorrendszerből származó energiával egészíti ki. Ugyanakkor képes csökkenteni vagy teljesen kiküszöbölni az elosztóhálózatba történő visszavezetéseket. Hálózati áramkimaradás esetén az inverter kevesebb mint 10 milliszekundum alatt automatikusan szünetmentes áramellátási (UPS) üzemmódba kapcsol, így a normál készülékeket nem érinti a kapcsolási késleltetés.\u003cbr\/\u003e\u003cbr\/\u003eAz inverter teljes mértékben megfelel az Új Zöld Takarékossági Támogatási Program (2021-2030) követelményeinek.\u003cbr\/\u003eSVT-kód SVT30841\u003cbr\/\u003e\u003cbr\/\u003eAz akkumulátoros rendszert külön kell megvásárolni!\u003cbr\/\u003eSofar GTX vagy BTS sorozatú akkumulátorok használata ajánlott, lásd a termék tartozékait.\u003cbr\/\u003e\u003cbr\/\u003e\u003cbr\/\u003eTermékparaméterek:\u003cbr\/\u003e\u003cbr\/\u003e- SVT tanúsítás\u003cbr\/\u003e- 3 fázisú, 20kW-os kimenet aszimmetrikus kimenettel\u003cbr\/\u003e- akár 10 párhuzamos egység csatlakoztatását teszi lehetővé a teljesítmény növelése érdekében\u003cbr\/\u003e- MPPT-vezérlő két bemenettel a rugalmasabb kábelezéshez\u003cbr\/\u003e- aktív APF-szűrő a kimeneten a jobb teljesítményminőség érdekében\u003cbr\/\u003e- állítható üzemmódok magas napenergia-hozam mellett\u003cbr\/\u003e- Teljesen digitális és pontos vezérlés beépített kijelzővel\u003cbr\/\u003e- A hálózaton kívüli kimenet nem kiegyensúlyozott terheléshez csatlakoztatható, háromfázisú önálló kimenet támogatott\u003cbr\/\u003e- WiFi és okosmérő mellékelve\u003cbr\/\u003e\u003cbr\/\u003e\u003cbr\/\u003eSpecifikációk:\u003cbr\/\u003e\u003cbr\/\u003e- Li-Ion akkumulátor támogatott.\u003cbr\/\u003e- Akkumulátor feszültség: 400-800 V\u003cbr\/\u003e- max. töltési\/kisütési áram: 50A\u003cbr\/\u003e- Csúcstöltési\/kisütési áram: 70A@60mp.\u003cbr\/\u003e- CAN kommunikációs interfész (RS 485)\u003cbr\/\u003e\u003cbr\/\u003eVédelmi rendszerek:\u003cbr\/\u003e- DC leválasztó: igen\u003cbr\/\u003e- AC áramvédő: igen\u003cbr\/\u003e- PV fordított polaritás elleni védelem: igen\u003cbr\/\u003e- akkumulátor fordított polaritás elleni védelem: igen\u003cbr\/\u003e- túláramvédelem: igen\u003cbr\/\u003e- túlfeszültség elleni védelem: igen, II. osztályú\u003cbr\/\u003e- hálózati túláram elleni védelem: igen\u003cbr\/\u003e- szigetelésgátló funkció: igen\u003cbr\/\u003e\u003cbr\/\u003eMPPT-vezérlő paraméterei:\u003cbr\/\u003e- A PV-bemenetek száma (trackerek): 2\u003cbr\/\u003e- ajánlott maximális PV-teljesítmény: 2×15000Wp\u003cbr\/\u003e- max. Egyenfeszültség (Voc): 1000V\u003cbr\/\u003e- MPPT szabályozási tartomány: 180 és 960V között\u003cbr\/\u003e- MPPT teljes terhelési tartomány: 450 és 850V között\u003cbr\/\u003e- Indítási (min.) feszültség: 200V\u003cbr\/\u003e- max. bemeneti áram: 25A (minden bemenetre)\u003cbr\/\u003e\u003cbr\/\u003eAC paraméterek (hálózati csatlakozás):\u003cbr\/\u003e- Névleges teljesítmény: 20 kW\u003cbr\/\u003e- 3L\/N\/PE névleges feszültség: 220\/380VAC és 230\/400VAC között\u003cbr\/\u003e- max. AC kimeneti teljesítmény a hálózatra: 22kW\u003cbr\/\u003e- max. 40kW\u003cbr\/\u003e- max. AC kimeneti áram a hálózatra: 32A\u003cbr\/\u003e- max. bemenő váltakozó áram az elosztóhálózatból: 58A\u003cbr\/\u003e\u003cbr\/\u003eAC kimeneti tartalék paraméterek:\u003cbr\/\u003e- Névleges teljesítmény: 20 kW\u003cbr\/\u003e- maximális teljesítmény: 22 kW\u003cbr\/\u003e- csúcsteljesítmény: 22kVA (60 sec.)\u003cbr\/\u003e- max. kimeneti áram: 32A\u003cbr\/\u003e- Kimeneti csúcsáram: 32A (60 sec.)\u003cbr\/\u003e- 3L\/N\/PE névleges feszültség: 220\/380VAC és 230\/400VAC között\u003cbr\/\u003e- kapcsolási idő: \u003c 20 ms\u003cbr\/\u003e\u003cbr\/\u003eÁltalános paraméterek:\u003cbr\/\u003e- Méretek: 571×515×264 mm\u003cbr\/\u003e- súly: 37 kg\u003cbr\/\u003e- kialakítás: transzformátor nélkül\u003cbr\/\u003e- készenléti energiafogyasztás: \u003c15W\u003cbr\/\u003e- zajszint: \u003c45dB\u003cbr\/\u003e- Hűtés: aktív\u003cbr\/\u003e- Védelem: IP65\u003cbr\/\u003e- Interfész: LCD kijelző + WiFi\u003cbr\/\u003e- Garancia: 5 év\u003cbr\/\u003e\u003cbr\/\u003eTermékvideó:\u003cbr\/\u003ehttps:\/\/www.youtube.com\/watch?v=0UrV-QgDynI\u0026t=591s\u0026ab_channel=SofarSolarEU\u003cbr\/\u003e\u003cbr\/\u003eKód SS15kW\u003cbr\/\u003e","brand":"SOFARSOLAR","offers":[{"title":"Default Title","offer_id":53554048368978,"sku":"04230571","price":58900.0,"currency_code":"CZK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0954\/9624\/1490\/files\/04230571.jpg?v=1779682142"},{"product_id":"stridac-hybridni-15kw-sofar-hyd15ktl-3ph","title":"Hybrid inverter 15kW SOFAR HYD15KTL-3PH","description":"A SOFARSOLAR HYD 15KTL-3PH egy kompakt, 3 fázisú hibrid inverter integrált MPPT vezérlővel és aszimmetrikus kimenettel. Alkalmas szigetüzemű, hálózati csatlakozás nélküli telepítésekhez is, vagy tipikus hálózaton lévő inverterként is használható. A névleges teljesítményének akár 200%-át elérő rövid távú túlterhelést is képes elviselni, és ezeket a csúcsokat a csatlakoztatott akkumulátorrendszerből származó energiával egészíti ki. Ugyanakkor képes csökkenteni vagy teljesen kiküszöbölni az elosztóhálózatba történő visszaáramlást. Hálózati áramkimaradás esetén az inverter kevesebb mint 10 milliszekundum alatt automatikusan szünetmentes áramellátási (UPS) üzemmódba kapcsol, így a normál készülékeket nem érinti a kapcsolási késleltetés.\u003cbr\/\u003e\u003cbr\/\u003eAz inverter teljes mértékben megfelel az Új Zöld Takarékossági Támogatási Program (2021-2030) követelményeinek.\u003cbr\/\u003eSVT-kód SVT30840\u003cbr\/\u003e\u003cbr\/\u003eAz akkumulátoros rendszert külön kell megvásárolni!\u003cbr\/\u003eSofar GTX vagy BTS sorozatú akkumulátorok használata ajánlott, lásd a termék tartozékait.\u003cbr\/\u003e\u003cbr\/\u003e\u003cbr\/\u003eTermékparaméterek:\u003cbr\/\u003e\u003cbr\/\u003e- SVT tanúsítás\u003cbr\/\u003e- 3 fázisú, 15kW teljesítmény aszimmetrikus kimenettel\u003cbr\/\u003e- akár 10 párhuzamos egység csatlakoztatását teszi lehetővé a teljesítmény növelése érdekében\u003cbr\/\u003e- MPPT-vezérlő két bemenettel a rugalmasabb kábelezéshez\u003cbr\/\u003e- aktív APF-szűrő a kimeneten a jobb teljesítményminőség érdekében\u003cbr\/\u003e- állítható üzemmódok magas napenergia-hozam mellett\u003cbr\/\u003e- Teljesen digitális és pontos vezérlés beépített kijelzővel\u003cbr\/\u003e- A hálózaton kívüli kimenet nem kiegyensúlyozott terheléshez csatlakoztatható, háromfázisú önálló kimenet támogatott\u003cbr\/\u003e- WiFi és okosmérő mellékelve\u003cbr\/\u003e\u003cbr\/\u003e\u003cbr\/\u003eSpecifikációk:\u003cbr\/\u003e\u003cbr\/\u003e- Li-Ion akkumulátor támogatott.\u003cbr\/\u003e- Akkumulátor feszültség: 300-800 V\u003cbr\/\u003e- max. töltési\/kisütési áram: 50A\u003cbr\/\u003e- Csúcstöltési\/kisütési áram: 70A@60mp.\u003cbr\/\u003e- CAN kommunikációs interfész (RS 485)\u003cbr\/\u003e\u003cbr\/\u003eVédelmi rendszerek:\u003cbr\/\u003e- DC leválasztó: igen\u003cbr\/\u003e- AC áramvédő: igen\u003cbr\/\u003e- PV fordított polaritás elleni védelem: igen\u003cbr\/\u003e- akkumulátor fordított polaritás elleni védelem: igen\u003cbr\/\u003e- túláramvédelem: igen\u003cbr\/\u003e- túlfeszültség elleni védelem: igen, II. osztályú\u003cbr\/\u003e- hálózati túláram elleni védelem: igen\u003cbr\/\u003e- szigetelésgátló funkció: igen\u003cbr\/\u003e\u003cbr\/\u003eMPPT-vezérlő paraméterei:\u003cbr\/\u003e- A PV-bemenetek száma (trackerek): 2\u003cbr\/\u003e- ajánlott maximális PV-teljesítmény: 2×11250Wp\u003cbr\/\u003e- max. Egyenfeszültség (Voc): 1000V\u003cbr\/\u003e- MPPT szabályozási tartomány: 180 és 960V között\u003cbr\/\u003e- MPPT teljes terhelési tartomány: 350 és 850V között\u003cbr\/\u003e- Indítási (min.) feszültség: 200V\u003cbr\/\u003e- max. bemeneti áram: 25A (minden bemenetre)\u003cbr\/\u003e\u003cbr\/\u003eAC paraméterek (hálózati csatlakozás):\u003cbr\/\u003e- Névleges teljesítmény: 15 kW\u003cbr\/\u003e- 3L\/N\/PE névleges feszültség: 220\/380VAC és 230\/400VAC között\u003cbr\/\u003e- max. AC kimeneti teljesítmény a hálózatra: 16,5kW\u003cbr\/\u003e- max. 30kW\u003cbr\/\u003e- max. AC kimeneti áram a hálózatra: 24A\u003cbr\/\u003e- max. bemeneti váltakozó áram az elosztóhálózatból: 44A\u003cbr\/\u003e\u003cbr\/\u003eAC kimeneti tartalék paraméterek:\u003cbr\/\u003e- Névleges teljesítmény: 15 kW\u003cbr\/\u003e- maximális teljesítmény: 16,5kW\u003cbr\/\u003e- csúcsteljesítmény: 22kVA (60 sec.)\u003cbr\/\u003e- max. kimeneti áram: 24A\u003cbr\/\u003e- Kimeneti csúcsáram: 32A (60 sec.)\u003cbr\/\u003e- 3L\/N\/PE névleges feszültség: 220\/380VAC és 230\/400VAC között\u003cbr\/\u003e- kapcsolási idő: \u003c 20 ms\u003cbr\/\u003e\u003cbr\/\u003eÁltalános paraméterek:\u003cbr\/\u003e- Méretek: 571×515×264 mm\u003cbr\/\u003e- súly: 37 kg\u003cbr\/\u003e- kialakítás: transzformátor nélkül\u003cbr\/\u003e- készenléti energiafogyasztás: \u003c15W\u003cbr\/\u003e- zajszint: \u003c45dB\u003cbr\/\u003e- Hűtés: aktív\u003cbr\/\u003e- Védelem: IP65\u003cbr\/\u003e- Interfész: LCD kijelző + WiFi\u003cbr\/\u003e- Garancia: 5 év\u003cbr\/\u003e\u003cbr\/\u003eTermékvideó:\u003cbr\/\u003ehttps:\/\/www.youtube.com\/watch?v=0UrV-QgDynI\u0026t=591s\u0026ab_channel=SofarSolarEU\u003cbr\/\u003e\u003cbr\/\u003eKód SS15kW\u003cbr\/\u003e","brand":"SOFARSOLAR","offers":[{"title":"Default Title","offer_id":53565120840018,"sku":"04230572","price":54900.0,"currency_code":"CZK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0954\/9624\/1490\/files\/04230572.jpg?v=1779712140"},{"product_id":"menic-napeti-nabijec-victron-energy-multiplus-ii-48v-5000va-70a-50a","title":"Voltage converter\/charger Victron Energy MultiPlus-II 48V\/5000VA\/70A-50A","description":"Victron Energy MultiPlus-II 48V\/5000VA\/70A-50A inverter\/charger\u003cbr\/\u003eThe MultiPlus is a powerful DC-AC inverter\/charger with pure sine wave output, an integrated adaptive battery charger and an ultra-fast power source transfer switch (battery\/external AC source).\u003cbr\/\u003e\u003cbr\/\u003eThe MultiPlus-II is a multi-function inverter\/charger with the ability to connect an external current sensor, extending the PowerControl and PowerAssist features, ideal for use in islanded and ESS systems. It also has all the features of the MultiGrid unit with built-in anti-islanding protection on its AC input - enhanced protection to prevent unwanted supply to the distribution grid in the event of a grid failure.\u003cbr\/\u003e\u003cbr\/\u003eMain features:\u003cbr\/\u003e\u003cbr\/\u003ePowerControl and PowerAssist:\u003cbr\/\u003eMultiPlus-II prevents overloading of a power-limited AC source, e.g. a current-limited power connection or generator. Should a large load overload the input AC source, the charging current to the battery will be automatically reduced in the first step (PowerControl). The energy for charging is shifted to power the AC appliances. In the second step, the input AC source is boosted by the current drawn from the battery (PowerAssist). The AC output receives energy from the AC source and the battery (inverter) together.\u003cbr\/\u003e\u003cbr\/\u003eSolar power:\u003cbr\/\u003eAC power can be available even in the event of a grid failure. MuliPlus-II can be used in off-grid (islanded) systems as well as in PV systems permanently connected to the distribution grid. The MultiPlus-II is not equipped with a PV array input, but is designed to work with MPPT controllers (DC coupling systems) or grid-tied inverters (AC coupling systems) located at the AC input and\/or AC output.\u003cbr\/\u003e\u003cbr\/\u003eOne AC input:\u003cbr\/\u003eThe MultiPlus-II is equipped with one AC input for connection to the distribution grid or to a generator, for example. If two AC inputs are required, then select the Quattro unit.\u003cbr\/\u003e\u003cbr\/\u003eTwo AC outputs:\u003cbr\/\u003eMultiPlus-II is equipped with two AC outputs. The main AC1 output ensures power supply without power interruption. For example, in UPS mode, the MultiPlus-II will take over power to connected appliances (in less than 20 milliseconds) in the event of a mains or generator failure. The second AC output is only functional when the AC input (distribution network\/generator) is available. Therefore, a load that would quickly drain the batteries, such as a water heater, can be connected to this output and it will only be powered from the AC source.\u003cbr\/\u003e\u003cbr\/\u003eVirtually unlimited power due to parallel and three-phase operation:\u003cbr\/\u003eUp to 6 MultiPlus-II units can operate in parallel to achieve higher performance. For example, six 48\/5000\/70 units provide 25kW\/30kVA output power and 420A charging power. Three units of the same type can be configured for three-phase operation with phase shifting. But that's not all, up to 6 units in parallel can form a single phase. Thus, a three-phase system can consist of up to 18 units with a total continuous output power of 75kW\/90kVA and a charging power of 1200A.\u003cbr\/\u003eThe MultiPlus-II 8k, 10k and 15k models can only be connected in parallel if an external AC transfer switch is used. For more information, refer to the MultiPlus-II External Transfer Switch Application Guide.\u003cbr\/\u003e\u003cbr\/\u003eESS: Energy Storage Systems\u003cbr\/\u003eThe MultiPlus-II is a key element in Victron Energy's ESS system, providing the flexibility to combine with solar MPPT controllers or grid-tied PV inverters.\u003cbr\/\u003e\u003cbr\/\u003eConfigure, monitor and control the system locally:\u003cbr\/\u003eSettings can be changed using the VEConfigure software (PC or laptop and MK3-USB interface required).\u003cbr\/\u003e\u003cbr\/\u003eRemote configuration and monitoring:\u003cbr\/\u003eInstall a Cerbo GX or other GX device to connect to the Internet. Operational data can be stored and displayed on the VRM (Victron Remote Management) website free of charge. Once connected to the Internet, systems can be accessed remotely and settings changed. Several monitoring and control options are available: Cerbo GX, Ekrano GX, Color Control GX, Venus GX, laptop, PC, Bluetooth (with optional VE.Bus Smart dongle), Battery Monitor, Digital Multi Control Panel.\u003cbr\/\u003e\u003cbr\/\u003eFour stage adaptive charger with two outputs for battery charging:\u003cbr\/\u003eThe main DC output provides powerful full battery charging via an \"adaptive charging\" system. The software controls the three-stage automatic charging process to suit the condition of the battery and adds a fourth charging stage - maintenance charging. MultiPlus-II is designed to charge all types of lead acid, alkaline and lithium batteries.\u003cbr\/\u003e\u003cbr\/\u003eSystem configuration:\u003cbr\/\u003eIn the case of a simple e.g. UPS installation, the setup can be easily done in a few minutes using the DIP switches on the MultiPlus-II or the VE.Configure 3 software and a PC. Parallel and three-phase applications can be configured using VE.Bus Quick Configure software (up to three units) or more complex systems using VE.Bus System Configurator software (above three units) and a PC.\u003cbr\/\u003eOff-grid and hybrid PV installations to support self-consumption and greater energy independence, which include grid-tied inverters and\/or solar MPPT chargers, can be configured using VE.Configure 3 software with the appropriate assistants (dedicated functions for specific applications).\u003cbr\/\u003e\u003cbr\/\u003eMultiPlus-II has several programmable relays and auxiliary contacts for a variety of additional functions. You can download the basic VE.Configure 3 software as well as other software for configuration options free of charge at the following link: https:\/\/www.victronenergy.com\/support-and-downloads\/software\u003cbr\/\u003eFor the above software you will need the PC communication interface MK3-USB.\u003cbr\/\u003e\u003cbr\/\u003e\u003cbr\/\u003eTechnical parameters:\u003cbr\/\u003e\u003cbr\/\u003e- Manufacturer.\u003cbr\/\u003e- Technology: low frequency\u003cbr\/\u003e- continuous power: 4000 W\u003cbr\/\u003e- Battery voltage: 48 V\u003cbr\/\u003e- Bluetooth: no\u003cbr\/\u003e\u003cbr\/\u003e- Output voltage: 230 VAC ± 2% Frequency: 50 Hz ± 0.1%\u003cbr\/\u003e- Input voltage: 187-265 VAC, frequency: 45-65 Hz\u003cbr\/\u003e- continuous power at 25oC: 5000 VA \/ 4000W\u003cbr\/\u003e- Peak power: 9000 W\u003cbr\/\u003e- Transfer current: 50A\u003cbr\/\u003e- Max. efficiency: 96%\u003cbr\/\u003e- self-consumption: max. 18 W\u003cbr\/\u003e- self-consumption in \"Search\" mode: 2 W\u003cbr\/\u003e- Operating temperature range: -40 to +65 °C (fan cooling)\u003cbr\/\u003e- Humidity (non-condensing): max. 95%\u003cbr\/\u003e- weight: 30 kg\u003cbr\/\u003e- Dimensions: 565 x 320 x 149 mm\u003cbr\/\u003e\u003cbr\/\u003eThis product requires professional installation.","brand":"Victron Energy","offers":[{"title":"Default Title","offer_id":53588951138642,"sku":"04230699","price":20990.0,"currency_code":"CZK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0954\/9624\/1490\/files\/04230699.webp?v=1779954542"}],"url":"https:\/\/tipa.eu\/en-hu\/collections\/solar-inverters.oembed","provider":"TIPA","version":"1.0","type":"link"}