{"title":"Backup power supplies","description":"Refrigerators, computers, pumps, compressors, air conditioners and dozens of other devices greatly facilitate the daily functioning of households and beyond. But they need energy, mostly electricity, to work. Some of them are intermittent, others even constant for a large part of the day. And that can sometimes be a problem, even with a good transmission network. TIPA.EU's backup power supplies solve the risk associated with outages and occasional anomalies such as short circuits, overloads, over- or under-voltage. The power supplies provide a constant current to the electronics and in case of outages they keep the equipment running for several tens of minutes. You just need to choose the right one: those with \u003ca href=\"https:\/\/www.tipa.eu\/cz\/zalozni-zdroje\/c-2798\/?par=444:583,592\"\u003e300-500 W\u003c\/a\u003e can handle most electronics, \u003ca href=\"https:\/\/www.tipa.eu\/cz\/zalozni-zdroje\/c-2798\/?par=444:696,696\"\u003e700 W\u003c\/a\u003e pieces can handle more demanding boilers and pumps.","products":[{"product_id":"zdroj-zalozni-geti-gep500lf-sinus-500w-800va","title":"Backup power GETI GEP500LF sinus 500W (800VA)","description":"This product comes with a 3-year warranty.\u003cbr\/\u003e\u003cbr\/\u003eThe GETI emergency power supply system, which can also be combined with LiFePO4 batteries, is a device that provides an AC power source in case of a power grid failure. The emergency power supply system can be used as a backup power source for various pumps, automatic boilers, feeders, emergency lighting, camera systems, and more. In normal mode, the connected device is powered directly from the grid, and in the event of a power outage, the emergency power system automatically switches to inverter mode. The connected device is then powered by the attached battery. If the power supply is not restored, the emergency power system may shut down once the voltage of the connected battery drops below the set value. This is to protect the battery from deep discharge and subsequent damage. The EPS is equipped with a clear color display, a pure sine wave inverter based on a toroidal transformer, and a fast 32-bit processor.\u003cbr\/\u003e\u003cbr\/\u003eWarning: The contacts of the connected battery must be properly protected against contact with people, foreign objects, contact with other parts of the system, or short circuits.\u003cbr\/\u003e\u003cbr\/\u003eProduct description:\u003cbr\/\u003e\u003cbr\/\u003e- inverter, UPS, AVR and charger in one device\u003cbr\/\u003e- clear color display\u003cbr\/\u003e- high efficiency due to construction with toroidal transformer\u003cbr\/\u003e- high charging current\u003cbr\/\u003e- protection against overload, short circuit, overcharging and reverse polarity.\u003cbr\/\u003e\u003cbr\/\u003e\u003cbr\/\u003eTechnical parameters:\u003cbr\/\u003e\u003cbr\/\u003e- type of backup batteries: LiFePO4, AGM, GEL (not included in the product)\u003cbr\/\u003e- backup battery voltage: 12V DC\u003cbr\/\u003e- rated capacity: 800VA\u003cbr\/\u003e- rated power: 500W\u003cbr\/\u003e- transformer: toroid\u003cbr\/\u003e- input voltage: 230 V AC - 50Hz\u003cbr\/\u003e- output voltage: 230V AC ± 3% - 50Hz \/ pure sine wave\u003cbr\/\u003e- charging current: 5 A \/ 10 A optional\u003cbr\/\u003e- charging voltage: 13.6V ± 0.3V\u003cbr\/\u003e- low battery voltage limit: 11 V ± 0.3V\u003cbr\/\u003e- battery low voltage protection point: 10.5V ± 0.3V\u003cbr\/\u003e- transfer time: \u003c 4 ms\u003cbr\/\u003e- cooling system: Yes\u003cbr\/\u003e- operating temperature: 0 ~ 40°C\u003cbr\/\u003e- relative humidity: 10% ~ 90%\u003cbr\/\u003e- storage temperature: -15°~ 45°C\u003cbr\/\u003e- cable length to battery: 2 x 75 cm, M8\u003cbr\/\u003e- dimension: 138x155x226 mm\u003cbr\/\u003e- weight: 6,50 kg\u003cbr\/\u003e\u003cbr\/\u003e\u003cbr\/\u003ePackaging: box 1pc \/ carton 4pc\u003cbr\/\u003eCarton weight: 27,50 kg","brand":"GETI","offers":[{"title":"Default Title","offer_id":52541914087762,"sku":"04230667","price":2150.0,"currency_code":"CZK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0954\/9624\/1490\/files\/04230667_7246521e-900e-44a8-b519-65d3129bfd5d.png?v=1776175512"},{"product_id":"zdroj-zalozni-geti-gep501lf-sinus-500w-nastenny-800va","title":"Backup power GETI GEP501LF sinus 500W Wall-mounted (800VA)","description":"This product comes with a 3-year warranty.\u003cbr\/\u003e\u003cbr\/\u003eThe GETI emergency power system, which can also be combined with LiFePO4 batteries, is a device that provides an AC voltage source in the event of a power outage. The emergency power supply system can be used as a backup power source for various pumps, automatic boilers, feeders, emergency lighting, camera systems, and more. In normal mode, the connected device is powered directly from the grid, and in the event of a power outage, the emergency power system automatically switches to inverter mode. The connected device is then powered by the attached battery. If the power supply is not restored, the emergency power system may shut down once the voltage of the connected battery drops below the set value. This is to protect the battery from deep discharge and subsequent damage. The EPS is equipped with a clear color display, a pure sine wave inverter based on a toroidal transformer, and a fast 32-bit processor.\u003cbr\/\u003e\u003cbr\/\u003eWarning: The contacts of the connected battery must be properly protected against contact with people, foreign objects, contact with other parts of the system, or short circuits.\u003cbr\/\u003e\u003cbr\/\u003eProduct description:\u003cbr\/\u003e\u003cbr\/\u003e- inverter, UPS, AVR and charger in one device\u003cbr\/\u003e- clear color display\u003cbr\/\u003e- high efficiency due to construction with toroidal transformer\u003cbr\/\u003e- high charging current\u003cbr\/\u003e- protection against overload, short circuit, overcharging and reverse polarity.\u003cbr\/\u003e\u003cbr\/\u003e\u003cbr\/\u003eTechnical parameters:\u003cbr\/\u003e\u003cbr\/\u003e- type of backup batteries: LiFePO4, AGM, GEL (not included in the product)\u003cbr\/\u003e- backup battery voltage: 12V DC\u003cbr\/\u003e- rated capacity: 800VA\u003cbr\/\u003e- rated power: 500W\u003cbr\/\u003e- transformer: toroid\u003cbr\/\u003e- input voltage: 230 V AC - 50Hz\u003cbr\/\u003e- output voltage: 230V AC ± 3% - 50Hz \/ pure sine wave\u003cbr\/\u003e- charging current: 3A \/ 5 A \/ 10 A \/ 15A optional\u003cbr\/\u003e- charging voltage: 13.9V-14.5V(Cycle)\/13.3V-13.9V(Floating)\u003cbr\/\u003e- low battery voltage limit: 10.5V-11.5V (defined Acid)\/ 10.9V-11.5V(defined LifePO4)\u003cbr\/\u003e- battery low voltage protection point: 9.8V-11V (defined Acid)\/10.6V-11V(defined LifePO4)\u003cbr\/\u003e- transfer time: \u003c 4 ms\u003cbr\/\u003e- cooling system: Yes\u003cbr\/\u003e- operating temperature: 0 ~ 40°C\u003cbr\/\u003e- relative humidity: 10% ~ 90%\u003cbr\/\u003e- storage temperature: -15°~ 45°C\u003cbr\/\u003e- cable length to battery: 2 x 75 cm, M8\u003cbr\/\u003e- dimension: 210x253x102 mm\u003cbr\/\u003e\u003cbr\/\u003e\u003cbr\/\u003e\u003cbr\/\u003ePackaging: box 1pc \/ carton 4pc","brand":"GETI","offers":[{"title":"Default Title","offer_id":52541914349906,"sku":"04230668","price":2299.0,"currency_code":"CZK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0954\/9624\/1490\/files\/04230668_75b2b49e-674a-4a8f-9753-080f25bba6a6.png?v=1776148885"},{"product_id":"zdroj-zalozni-geti-gep300-sinus-300w-500va","title":"Backup source GETI GEP300 sine 300W (500VA)","description":"This product comes with a 3-year warranty.\u003cbr\/\u003e\u003cbr\/\u003eThe GETI emergency power supply system (EPS - Emergency Power Supply) is a device that provides a source of alternating voltage in the event of a power failure. You can use the Power Supply System (EPS) as a backup source for various pumps, automatic boilers, feeders, emergency lighting, camera systems and more. In normal mode, the connected device is powered directly from the network, and in the event of a failure, the emergency power system automatically switches to inverter mode. The connected device is then powered by the connected battery. If the power supply is not restored, the system (EPS) may switch off when the voltage of the connected battery drops to a value of around 10.2V ± 0.3V. This is to protect the battery from deep discharge and subsequent damage. The EPS is equipped with a clear colour display, a pure sine voltage converter based on a toroidal transformer and a fast 32-bit processor.\u003cbr\/\u003e\u003cbr\/\u003eWarning: the contacts of the connected battery must be properly protected against: contact with persons, foreign bodies, contact with other parts of the system or short circuits.\u003cbr\/\u003e\u003cbr\/\u003eProduct description:\u003cbr\/\u003e\u003cbr\/\u003e- inverter, UPS, AVR and charger in one device\u003cbr\/\u003e- clear LED colour display\u003cbr\/\u003e- high efficiency due to construction with toroidal transformer\u003cbr\/\u003e- high charging current\u003cbr\/\u003e- protection against overload, short circuit, overcharging and reverse polarity.\u003cbr\/\u003e\u003cbr\/\u003e\u003cbr\/\u003eTechnical parameters:\u003cbr\/\u003e\u003cbr\/\u003e- type of backup batteries: AGM, GEL (not included in the product)\u003cbr\/\u003e- backup battery voltage: 12V DC\u003cbr\/\u003e- rated capacity: 500VA\u003cbr\/\u003e- rated power: 300W\u003cbr\/\u003e- transformer: toroid\u003cbr\/\u003e- input voltage: 230 V AC - 50Hz\u003cbr\/\u003e- output voltage: 230V AC ± 3% - 50Hz \/ pure sine wave\u003cbr\/\u003e- charging current: 5 A \/ 10 A optional\u003cbr\/\u003e- charging voltage: 13.6V ± 0.3V\u003cbr\/\u003e- low battery voltage limit: 10.9V ± 0.3V\u003cbr\/\u003e- battery low voltage protection point: 10.5V ± 0.3V\u003cbr\/\u003e- transfer time: \u003c 4 ms\u003cbr\/\u003e- cooling system: Yes\u003cbr\/\u003e- operating temperature: 0 ~ 40°C\u003cbr\/\u003e- relative humidity: 10% ~ 90%\u003cbr\/\u003e- storage temperature: -15°~ 45°C\u003cbr\/\u003e- cable length to battery: 2 x 75 cm, M8\u003cbr\/\u003e- dimension: 146 x 170 x 237 mm\u003cbr\/\u003e- weight: 5 kg\u003cbr\/\u003e\u003cbr\/\u003e\u003cbr\/\u003ePackaging: box 1pc \/ carton 4pc\u003cbr\/\u003eCarton weight: 22 kg","brand":"GETI","offers":[{"title":"Default Title","offer_id":52541925491026,"sku":"04230582","price":1855.0,"currency_code":"CZK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0954\/9624\/1490\/files\/04230582_1a40a8f8-2e79-4b61-962f-a342256bd6e3.png?v=1776147246"},{"product_id":"zdroj-zalozni-geti-gep500-sinus-500w-800va","title":"Backup power GETI GEP500 sinus 500W (800VA)","description":"This product comes with a 3-year warranty.\u003cbr\/\u003e\u003cbr\/\u003eThe GETI emergency power supply system (EPS - Emergency Power Supply) is a device that provides a source of alternating voltage in the event of a power failure. You can use the emergency power supply as a backup source for various pumps, automatic boilers, feeders, emergency lighting, camera systems and more. In normal mode, the connected device is powered directly from the network, and in the event of a failure, the emergency power system automatically switches to inverter mode. The connected device is then powered by the connected battery. If the power supply is not restored, the system EPS may be switched off at the moment when the voltage of the connected battery drops to a value of around 10.2V ± 0.3V. This is to protect the battery from deep discharge and subsequent damage. The EPS is equipped with a clear color display, a pure sine voltage converter based on a toroidal transformer and a fast 32-bit processor.\u003cbr\/\u003e\u003cbr\/\u003eWarning: the contacts of the connected battery must be properly protected against: contact with persons, foreign bodies, contact with other parts of the system or short circuits.\u003cbr\/\u003e\u003cbr\/\u003eProduct description:\u003cbr\/\u003e\u003cbr\/\u003e- inverter, UPS, AVR and charger in one device\u003cbr\/\u003e- clear color display\u003cbr\/\u003e- high efficiency due to construction with toroidal transformer\u003cbr\/\u003e- high charging current\u003cbr\/\u003e- protection against overload, short circuit, overcharging and reverse polarity.\u003cbr\/\u003e\u003cbr\/\u003e\u003cbr\/\u003eTechnical parameters:\u003cbr\/\u003e\u003cbr\/\u003e- type of backup batteries: AGM, GEL (not included in the product)\u003cbr\/\u003e- backup battery voltage: 12V DC\u003cbr\/\u003e- rated capacity: 800VA\u003cbr\/\u003e- rated power: 500W\u003cbr\/\u003e- transformer: toroid\u003cbr\/\u003e- input voltage: 230 V AC - 50Hz\u003cbr\/\u003e- output voltage: 230V AC ± 3% - 50Hz \/ pure sine wave\u003cbr\/\u003e- charging current: 5 A \/ 10 A optional\u003cbr\/\u003e- charging voltage: 13.6V ± 0.3V\u003cbr\/\u003e- low battery voltage limit: 11 V ± 0.3V\u003cbr\/\u003e- battery low voltage protection point: 10.5V ± 0.3V\u003cbr\/\u003e- transfer time: \u003c 4 ms\u003cbr\/\u003e- cooling system: Yes\u003cbr\/\u003e- operating temperature: 0 ~ 40°C\u003cbr\/\u003e- relative humidity: 10% ~ 90%\u003cbr\/\u003e- storage temperature: -15°~ 45°C\u003cbr\/\u003e- cable length to battery: 2 x 75 cm, M8\u003cbr\/\u003e- dimension: 230 x 145 x 180 mm\u003cbr\/\u003e- weight: 6,50 kg\u003cbr\/\u003e\u003cbr\/\u003e\u003cbr\/\u003ePackaging: box 1pc \/ carton 4pc\u003cbr\/\u003eCarton weight: 27,50 kg","brand":"GETI","offers":[{"title":"Default Title","offer_id":52541925687634,"sku":"04230583","price":1999.0,"currency_code":"CZK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0954\/9624\/1490\/files\/04230583_6abe8c47-3878-4f63-af37-917026d29e8a.png?v=1776147265"},{"product_id":"zdroj-zalozni-geti-gep301-sinus-300w-nastenny-500va","title":"Backup power GETI GEP301 sinus 300W Wall-mounted (500VA)","description":"This product comes with a 3-year warranty.\u003cbr\/\u003e\u003cbr\/\u003eThe GETI emergency power supply system (EPS - Emergency Power Supply) is a device that provides a source of alternating voltage in the event of a power failure. You can use the Power Supply System (EPS) as a backup source for various pumps, automatic boilers, feeders, emergency lighting, camera systems and more. In normal mode, the connected device is powered directly from the network, and in the event of a failure, the emergency power system automatically switches to inverter mode. The connected device is then powered by the connected battery. If the power supply is not restored, the system (EPS) may switch off when the voltage of the connected battery drops to a value of around 10.2V ± 0.3V. This is to protect the battery from deep discharge and subsequent damage. The EPS is equipped with a clear colour display, a pure sine voltage converter based on a toroidal transformer and a fast 32-bit processor.\u003cbr\/\u003e\u003cbr\/\u003eWarning: the contacts of the connected battery must be properly protected against: contact with persons, foreign bodies, contact with other parts of the system or short circuits.\u003cbr\/\u003e\u003cbr\/\u003eProduct description:\u003cbr\/\u003e\u003cbr\/\u003e- inverter, UPS, AVR and charger in one device\u003cbr\/\u003e- clear LED colour display\u003cbr\/\u003e- high efficiency due to construction with toroidal transformer\u003cbr\/\u003e- high charging current\u003cbr\/\u003e- protection against overload, short circuit, overcharging and reverse polarity.\u003cbr\/\u003e\u003cbr\/\u003e\u003cbr\/\u003e\u003cbr\/\u003eTechnical parameters:\u003cbr\/\u003e\u003cbr\/\u003e- type of backup batteries: AGM, GEL (not included in the product)\u003cbr\/\u003e- backup battery voltage: 12V DC\u003cbr\/\u003e- rated capacity: 500VA\u003cbr\/\u003e- rated power: 300W\u003cbr\/\u003e- transformer: toroid\u003cbr\/\u003e- input voltage: 230 V AC - 50Hz\u003cbr\/\u003e- output voltage: 230V AC ± 3% - 50Hz \/ pure sine wave\u003cbr\/\u003e- charging current: 5 A \/ 10 A optional\u003cbr\/\u003e- charging voltage: 13.6V ± 0.3V\u003cbr\/\u003e- low battery voltage limit: 11 V ± 0.3V\u003cbr\/\u003e- battery low voltage protection point: 10.5V ± 0.3V\u003cbr\/\u003e- transfer time: \u003c 4 ms\u003cbr\/\u003e- cooling system: Yes\u003cbr\/\u003e- operating temperature: 0 ~ 40°C\u003cbr\/\u003e- relative humidity: 10% ~ 90%\u003cbr\/\u003e- storage temperature: -15°~ 45°C\u003cbr\/\u003e- cable length to battery: 2 x 75 cm, M8\u003cbr\/\u003e- dimension: 210x253x102 mm\u003cbr\/\u003e- weight: 4 kg\u003cbr\/\u003e\u003cbr\/\u003e\u003cbr\/\u003ePackaging: box 1pc \/ carton 4pc\u003cbr\/\u003eCarton weight: 18 kg","brand":"GETI","offers":[{"title":"Default Title","offer_id":52541925949778,"sku":"04230584","price":1859.0,"currency_code":"CZK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0954\/9624\/1490\/files\/04230584_1349aee8-cdc3-427b-a141-72f8e037fb1d.png?v=1776147267"},{"product_id":"zdroj-zalozni-geti-gep501-sinus-500w-nastenny-800va","title":"Backup power GETI GEP501 sinus 500W Wall-mounted (800VA)","description":"This product comes with a 3-year warranty.\u003cbr\/\u003e\u003cbr\/\u003eThe GETI emergency power supply system (EPS - Emergency Power Supply) is a device that provides a source of alternating voltage in the event of a power failure. You can use the Power Supply System (EPS) as a backup source for various pumps, automatic boilers, feeders, emergency lighting, camera systems and more. In normal mode, the connected device is powered directly from the network, and in the event of a failure, the emergency power system automatically switches to inverter mode. The connected device is then powered by the connected battery. If the power supply is not restored, the system (EPS) may switch off when the voltage of the connected battery drops to a value of around 10.2V ± 0.3V. This is to protect the battery from deep discharge and subsequent damage. The EPS is equipped with a clear colour display, a pure sine voltage converter based on a toroidal transformer and a fast 32-bit processor.\u003cbr\/\u003e\u003cbr\/\u003eWarning: the contacts of the connected battery must be properly protected against: contact with persons, foreign bodies, contact with other parts of the system or short circuits.\u003cbr\/\u003e\u003cbr\/\u003eProduct description:\u003cbr\/\u003e\u003cbr\/\u003e- inverter, UPS, AVR and charger in one device\u003cbr\/\u003e- clear LED colour display\u003cbr\/\u003e- high efficiency due to construction with toroidal transformer\u003cbr\/\u003e- high charging current\u003cbr\/\u003e- protection against overload, short circuit, overcharging and reverse polarity.\u003cbr\/\u003e\u003cbr\/\u003e\u003cbr\/\u003e\u003cbr\/\u003eTechnical parameters:\u003cbr\/\u003e\u003cbr\/\u003e- type of backup batteries: AGM, GEL (not included in the product)\u003cbr\/\u003e- backup battery voltage: 12V DC\u003cbr\/\u003e- rated capacity: 800VA\u003cbr\/\u003e- rated power: 500W\u003cbr\/\u003e- transformer: toroid\u003cbr\/\u003e- input voltage: 230 V AC - 50Hz\u003cbr\/\u003e- output voltage: 220V AC ± 3% - 50Hz \/ pure sine wave\u003cbr\/\u003e- charging current: 10A\/ 15A\/ 20A optional\u003cbr\/\u003e- charging voltage: 13.6V ± 0.3V\u003cbr\/\u003e- low battery voltage limit: 10.9V ± 0.3V\u003cbr\/\u003e- battery low voltage protection point: 10.2V ± 0.3V\u003cbr\/\u003e- transfer time: \u003c 4 ms\u003cbr\/\u003e- cooling system: Yes\u003cbr\/\u003e- operating temperature: 0 ~ 40°C\u003cbr\/\u003e- relative humidity: 10% ~ 90%\u003cbr\/\u003e- storage temperature: -15°~ 45°C\u003cbr\/\u003e- cable length to battery: 2 x 75 cm, M8\u003cbr\/\u003e- dimension: 210x253x102 mm\u003cbr\/\u003e- weight: 4,5 kg\u003cbr\/\u003e\u003cbr\/\u003e\u003cbr\/\u003ePackaging: box 1pc \/ carton 2pc\u003cbr\/\u003eCarton weight: 8 kg","brand":"GETI","offers":[{"title":"Default Title","offer_id":52541926179154,"sku":"04230585","price":2249.0,"currency_code":"CZK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0954\/9624\/1490\/files\/04230585_861b6264-eda7-4185-85f7-46a0c301d751.png?v=1776147270"},{"product_id":"zdroj-zalozni-rebel-power-500-12v-230v-500va-300w-black-nastenny","title":"Power supply REBEL POWER-500 12V 230V 500VA 300W Black wall-mounted","description":"If you have devices in your home that require continuous power to function properly, you should also invest in an uninterruptible power supply. This device is especially useful in winter, as it will maintain the stable operation of the furnace, pump or other installations that guarantee the heating of the house in the event of a power failure.\u003cbr\/\u003e\u003cbr\/\u003eHome emergency power\u003cbr\/\u003eThe role of Rebel emergency power systems is to protect equipment from power failure and, as a result, disruption or interruption of their operation.\u003cbr\/\u003e\u003cbr\/\u003eAre you wondering which UPS to choose for a gas boiler, or maybe you are interested in a UPS for an eco-pea or pellet stove? Rebel's POWER range is ideal as an emergency power supply for central heating pumps or pumps in fireplace installations, as well as induction motors, or for example installation automation equipment using heat convectors and any equipment that is extremely sensitive to the slightest changes in voltage shape. Their advantage is a clean sinusoidal course of the output voltage (supplying the load), thanks to which the device ensures stable operation, preventing the influence of overheating of inductive loads. Together with the 12V battery, it forms a complete power supply with a guarantee of 230 VAC.\u003cbr\/\u003e\u003cbr\/\u003eHome uninterruptible power supply - application\u003cbr\/\u003eEmergency power supply to furnaces\u003cbr\/\u003eRTV equipment (televisions, tuners, hi-fi, DVD)\u003cbr\/\u003eHome appliances (refrigerators, blenders)\u003cbr\/\u003ePower tools (drills, grinders)\u003cbr\/\u003ePower for chargers (smartphones, tablets, phones, laptops)\u003cbr\/\u003ePumps, compressors (water, heat, air conditioning)\u003cbr\/\u003eOffice equipment (faxes, computers, monitors)\u003cbr\/\u003e\u003cbr\/\u003eSafety guaranteed\u003cbr\/\u003eRebel backup power supplies are equipped with a number of protections, such as against overload, short circuit, and too high and too low voltage. The solutions used are the basis of security and your peace of mind!\u003cbr\/\u003e\u003cbr\/\u003eThree operating modes\u003cbr\/\u003eThe emergency power mode with charging function converts the 12V DC voltage supplied from the external battery to 230V AC voltage and charges the external battery. Charger mode charges an external battery. Converter mode converts 12V DC voltage from the battery to 230V AC voltage.\u003cbr\/\u003e\u003cbr\/\u003eConstant phase uninterruptible power supply\u003cbr\/\u003eThe Rebel backup power supply works with appliances equipped with phase detection, such as some models of gas furnaces. The phase in our device is in a fixed place, regardless of whether it is powered from a mains socket or from a battery.\u003cbr\/\u003e\u003cbr\/\u003eA battery to power your home is not included.\u003cbr\/\u003e\u003cbr\/\u003eLED display\u003cbr\/\u003eConvenient use of the uninterruptible Rebel source is guaranteed by a clear LED display. Thanks to it, you can easily read the current operating status of the device, check, among other things: input voltage, output voltage and frequency. In addition, you can quickly check the load level and battery level.\u003cbr\/\u003e\u003cbr\/\u003eTechnical parameters:\u003cbr\/\u003e\u003cbr\/\u003eRated power: 300 W\u003cbr\/\u003eBattery type: 12 V DC\u003cbr\/\u003eMaximum battery voltage: 15 V DC\u003cbr\/\u003eInput voltage range: 180~275V AC\u003cbr\/\u003eInput frequency: 45 ~ 60 Hz\u003cbr\/\u003eOutput voltage range: 230 V AC +\/-8%\u003cbr\/\u003eOutput frequency: 50 \/60 Hz +\/-0.5 Hz\u003cbr\/\u003eOutput voltage shape: Pure sine wave\u003cbr\/\u003eOutput efficiency \u003e=85% (DC to AC)\u003cbr\/\u003eBattery charging current: Max 10 A\u003cbr\/\u003eSwitching time: \u003c=4 ms\u003cbr\/\u003eProtections: Against overload, short circuit, overload high or too low voltage\u003cbr\/\u003ePermissible operating temperature: 0-40°C\u003cbr\/\u003ePermissible humidity 10 - 90%\u003cbr\/\u003eDimensions: 215 x 265 x 100 mm\u003cbr\/\u003eWeight: 4.7 kg","brand":"REBEL","offers":[{"title":"Default Title","offer_id":52541933322578,"sku":"08840360","price":1819.0,"currency_code":"CZK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0954\/9624\/1490\/files\/08840360_a75b1e3e-32aa-4d12-9adb-d27d27496e67.png?v=1776147698"},{"product_id":"zdroj-zalozni-geti-gep700-sinus-700w-1000va","title":"Backup power GETI GEP700 sinus 700W (1000VA)","description":"This product comes with a 3-year warranty.\u003cbr\/\u003e\u003cbr\/\u003eThe GETI Emergency Power Supply (EPS) system with pure sine wave output is a device that provides an AC voltage source in the event of a power outage. The emergency power supply can be used as a backup power source for various pumps, automatic boilers, feeders, emergency lighting, camera systems, and more. In normal mode, the connected device is powered directly from the grid, and in case of a power failure, the emergency power supply automatically switches to inverter mode. The connected device is then powered by the attached battery. If the power supply is not restored, the emergency power system may shut down when the voltage of the connected battery drops to around 10.2V ± 0.3V. This is to protect the battery from deep discharge and subsequent damage. The EPS is equipped with a clear color display, a pure sine wave inverter based on a toroidal transformer, and a fast 32-bit processor.\u003cbr\/\u003e\u003cbr\/\u003eWarning: The contacts of the connected battery must be properly protected against accidental contact by persons, foreign objects, contact with other parts of the system, or short circuits.\u003cbr\/\u003e\u003cbr\/\u003eProduct description:\u003cbr\/\u003e\u003cbr\/\u003e- inverter, UPS, AVR and charger in one device\u003cbr\/\u003e- clear color display\u003cbr\/\u003e- high efficiency due to construction with toroidal transformer\u003cbr\/\u003e- high charging current\u003cbr\/\u003e- protection against overload, short circuit, overcharging and reverse polarity.\u003cbr\/\u003e\u003cbr\/\u003e\u003cbr\/\u003eTechnical parameters:\u003cbr\/\u003e\u003cbr\/\u003e- type of backup batteries: AGM, GEL (not included in the product)\u003cbr\/\u003e- backup battery voltage: 12V DC\u003cbr\/\u003e- rated capacity: 1000VA\u003cbr\/\u003e- rated power: 700W\u003cbr\/\u003e- transformer: toroid\u003cbr\/\u003e- input voltage: 230 V AC - 50Hz\u003cbr\/\u003e- output voltage: 230V AC ± 3% - 50Hz \/ pure sine wave\u003cbr\/\u003e- charging current: 10 A \/ 20 A optional\u003cbr\/\u003e- charging voltage: 13.8V ± 0.3V\u003cbr\/\u003e- low battery voltage limit: 11 V ± 0.3V\u003cbr\/\u003e- battery low voltage protection point: 10.5V ± 0.3V\u003cbr\/\u003e- transfer time: \u003c 4 ms\u003cbr\/\u003e- cooling system: Yes\u003cbr\/\u003e- operating temperature: 0 ~ 40°C\u003cbr\/\u003e- relative humidity: 10% ~ 90%\u003cbr\/\u003e- storage temperature: -15°~ 45°C\u003cbr\/\u003e- cable length to battery: 2 x 75 cm, M8\u003cbr\/\u003e- dimension: 146 x 338  x 170  mm\u003cbr\/\u003e- weight:  6,40 kg\u003cbr\/\u003e\u003cbr\/\u003e\u003cbr\/\u003ePackaging: box 1pc \/ carton 2pcs\u003cbr\/\u003eCarton weight: 14,60 kg","brand":"GETI","offers":[{"title":"Default Title","offer_id":52541952360786,"sku":"04230627","price":2749.0,"currency_code":"CZK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0954\/9624\/1490\/files\/04230627_0f79fb8f-7718-48a6-8b7c-f0c7296ba263.png?v=1776148143"},{"product_id":"zdroj-zalozni-geti-gep701-sinus-700w-nastenny-1000va","title":"Backup power GETI GEP701 sinus 700W Wall-mounted (1000VA)","description":"This product comes with a 3-year warranty.\u003cbr\/\u003e\u003cbr\/\u003eThe GETI Emergency Power Supply (EPS) system with pure sine wave output is a device that provides an AC voltage source in the event of a power outage. The emergency power supply can be used as a backup power source for various pumps, automatic boilers, feeders, emergency lighting, camera systems, and more. In normal mode, the connected device is powered directly from the grid, and in case of a power failure, the emergency power supply automatically switches to inverter mode. The connected device is then powered by the attached battery. If the power supply is not restored, the emergency power system may shut down when the voltage of the connected battery drops to around 10.2V ± 0.3V. This is to protect the battery from deep discharge and subsequent damage. The EPS is equipped with a clear color display, a pure sine wave inverter based on a toroidal transformer, and a fast 32-bit processor.\u003cbr\/\u003e\u003cbr\/\u003eWarning: The contacts of the connected battery must be properly protected against accidental contact by persons, foreign objects, contact with other parts of the system, or short circuits.\u003cbr\/\u003e\u003cbr\/\u003e\u003cbr\/\u003eProduct description:\u003cbr\/\u003e\u003cbr\/\u003e- inverter, UPS, AVR and charger in one device\u003cbr\/\u003e- clear LED colour display\u003cbr\/\u003e- high efficiency due to construction with toroidal transformer\u003cbr\/\u003e- high charging current\u003cbr\/\u003e- protection against overload, short circuit, overcharging and reverse polarity.\u003cbr\/\u003e\u003cbr\/\u003e\u003cbr\/\u003e\u003cbr\/\u003eTechnical parameters:\u003cbr\/\u003e\u003cbr\/\u003e- type of backup batteries: AGM, GEL (not included in the product)\u003cbr\/\u003e- backup battery voltage: 12V DC\u003cbr\/\u003e- rated capacity: 1000VA\u003cbr\/\u003e- rated power: 700W\u003cbr\/\u003e- transformer: toroid\u003cbr\/\u003e- input voltage: 230 V AC - 50Hz\u003cbr\/\u003e- output voltage: 220V AC ± 3% - 50Hz \/ pure sine wave\u003cbr\/\u003e- charging current: 10A\/ 20A optional\u003cbr\/\u003e- charging voltage: 13.8V ± 0.3V\u003cbr\/\u003e- low battery voltage limit: 10.9V ± 0.3V\u003cbr\/\u003e- battery low voltage protection point: 10.2V ± 0.3V\u003cbr\/\u003e- transfer time: \u003c 4 ms\u003cbr\/\u003e- cooling system: Yes\u003cbr\/\u003e- operating temperature: 0 ~ 40°C\u003cbr\/\u003e- relative humidity: 10% ~ 90%\u003cbr\/\u003e- storage temperature: -15°~ 45°C\u003cbr\/\u003e- cable length to battery: 2 x 75 cm, M8\u003cbr\/\u003e- dimension:  311 x 232 x 140 mm\u003cbr\/\u003e- weight: 6,5kg\u003cbr\/\u003e\u003cbr\/\u003e\u003cbr\/\u003ePackaging: box 1pc \/ carton 1pc\u003cbr\/\u003eCarton weight: 7,5kg","brand":"GETI","offers":[{"title":"Default Title","offer_id":52541952590162,"sku":"04230628","price":2899.0,"currency_code":"CZK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0954\/9624\/1490\/files\/04230628_a89d3b98-9900-4b06-ba7d-efd61838e202.png?v=1776148144"},{"product_id":"zdroj-zalozni-geti-gep701pv-sinus-700w-nastenny-1000va","title":"Backup power GETI GEP701PV sinus 700W Wall-mounted (1000VA)","description":"This product comes with a 3-year warranty.\u003cbr\/\u003e\u003cbr\/\u003eEmergency Power Supply GETI (EPS) with a pure sine wave output signal is a device designed to provide an alternative power source in case of a power outage. The emergency power supply can be connected to photovoltaic panels through the built-in MPPT regulator, enabling it to power backup devices using solar energy. It is suitable for backing up various appliances such as circulation pumps, automatic boilers, feeders, emergency lighting, camera systems, and more. It features three operational modes: (PV-BAT-AC), (PV-AC-BAT), and (AC-PV-BAT). In the standard mode, the connected device is powered directly from the grid, and in case of a power outage, the emergency power system automatically switches to the inverter mode. The connected device is then powered from the connected solar panels or the battery. If the restoration of electrical power does not occur, the emergency power supply may shut down when the voltage of the connected battery drops to around 10.2V ± 0.3V to protect the battery from deep discharge and potential damage. The emergency power supply is equipped with a color display, an integrated charger batteries, and a pure sine wave voltage inverter. The inverter's construction is based on an efficient toroidal transformer and a fast 32-bit processor.\u003cbr\/\u003e\u003cbr\/\u003eWarning: the contacts of the connected battery must be properly protected against: contact with persons, foreign bodies, contact with other parts of the system or short circuits.\u003cbr\/\u003e\u003cbr\/\u003eProduct Description:\u003cbr\/\u003e\u003cbr\/\u003e- powered by Photovoltaic panels\u003cbr\/\u003e- adjustable priority - PV \/ AC \/ Battery\u003cbr\/\u003e- MPPT regulator\u003cbr\/\u003e- pure sine wave output signal\u003cbr\/\u003e- inverter, UPS, AVR, and charger in one device\u003cbr\/\u003e- clear color LED display showing the operating status of the inverter and MPPT\u003cbr\/\u003e- high efficiency due to toroidal transformer construction\u003cbr\/\u003e- high charging current\u003cbr\/\u003e- protection against overload, short circuit, overcharge, and reverse polarity\u003cbr\/\u003e- active cooling: fan\u003cbr\/\u003e- socket type: French\u003cbr\/\u003e- warning for: overload, low voltage\u003cbr\/\u003e\u003cbr\/\u003e\u003cbr\/\u003eTechnical Parameters:\u003cbr\/\u003e\u003cbr\/\u003e- PV regulator: MPPT\u003cbr\/\u003e- rated capacity: 1000VA\u003cbr\/\u003e- rated power: 700W\u003cbr\/\u003e- transformer: toroid\u003cbr\/\u003e- dual LED display\u003cbr\/\u003e- operating mode: (PV - BAT - AC) \/ (PV - AC -BAT) \/ (AC - PV - BAT)\u003cbr\/\u003e\u003cbr\/\u003ePV\u003cbr\/\u003e- input voltage: 15 - 75 V DC\u003cbr\/\u003e- max. charging current: 40 A\u003cbr\/\u003e- max. conversion efficiency: 98%\u003cbr\/\u003e- regulator: MPPT\u003cbr\/\u003e\u003cbr\/\u003eAC\u003cbr\/\u003e- input voltage range: 140 - 275 V AC\u003cbr\/\u003e- input frequency range: 45 - 65 Hz\u003cbr\/\u003e- output voltage range: 195 - 240 V AC\u003cbr\/\u003e- charging current: 10 A\u003cbr\/\u003e\u003cbr\/\u003eInverter\u003cbr\/\u003e- output voltage: 230 V ±3%\u003cbr\/\u003e- frequency: 50 \/ 60 Hz\u003cbr\/\u003e- output power factor: ?0.8\u003cbr\/\u003e- efficiency: ?80%\u003cbr\/\u003e\u003cbr\/\u003e\u003cbr\/\u003eBattery\u003cbr\/\u003e- voltage: 12 V DC \u003cbr\/\u003e- type: AGM, GEL, flooded (not included in the product)\u003cbr\/\u003e- charger: built-in\u003cbr\/\u003e- backup system response time: 4 - 6 ms\u003cbr\/\u003e\u003cbr\/\u003e- mounting: wall-mounted\u003cbr\/\u003e- color: white\u003cbr\/\u003e- operating temperature: 0 ~ 40°C\u003cbr\/\u003e- relative humidity: 10% ~ 90%\u003cbr\/\u003e- storage temperature: -15°~ 45°C\u003cbr\/\u003e- cable length to battery: 2 x 75 cm, M8\u003cbr\/\u003e- dimensions: 310x312x167 mm\u003cbr\/\u003e\u003cbr\/\u003e- Weight: 11,2 kg\u003cbr\/\u003e\u003cbr\/\u003ePackaging: 1 pc\/box, 1 pcs\/carton\u003cbr\/\u003eCarton weight: 12 kg","brand":"GETI","offers":[{"title":"Default Title","offer_id":52541952754002,"sku":"04230629","price":3749.0,"currency_code":"CZK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0954\/9624\/1490\/files\/04230629_c9016427-1b0d-4119-b1b8-6d77ec6841fe.png?v=1776148145"},{"product_id":"zdroj-zalozni-geti-gep501pv-sinus-500w-nastenny-800va","title":"Backup power GETI GEP501PV sinus 500W Wall-mounted (800VA)","description":"This product comes with a 3-year warranty.\u003cbr\/\u003e\u003cbr\/\u003eEmergency Power Supply GETI (EPS) with a pure sine wave output signal is a device designed to provide an alternative power source in case of a power outage. The emergency power supply can be connected to photovoltaic panels through the built-in MPPT regulator, enabling it to power backup devices using solar energy. It is suitable for backing up various appliances such as circulation pumps, automatic boilers, feeders, emergency lighting, camera systems, and more. It features three operational modes: (PV-BAT-AC), (PV-AC-BAT), and (AC-PV-BAT). In the standard mode, the connected device is powered directly from the grid, and in case of a power outage, the emergency power system automatically switches to the inverter mode. The connected device is then powered from the connected solar panels or the battery. If the restoration of electrical power does not occur, the emergency power supply may shut down when the voltage of the connected battery drops to around 10.2V ± 0.3V to protect the battery from deep discharge and potential damage. The emergency power supply is equipped with a color display, an integrated charger batteries, and a pure sine wave voltage inverter. The inverter's construction is based on an efficient toroidal transformer and a fast 32-bit processor.\u003cbr\/\u003e\u003cbr\/\u003eWarning: the contacts of the connected battery must be properly protected against: contact with persons, foreign bodies, contact with other parts of the system or short circuits.\u003cbr\/\u003e\u003cbr\/\u003eProduct Description:\u003cbr\/\u003e\u003cbr\/\u003e- powered by Photovoltaic panels\u003cbr\/\u003e- adjustable priority - PV \/ AC \/ Battery\u003cbr\/\u003e- MPPT regulator\u003cbr\/\u003e- pure sine wave output signal\u003cbr\/\u003e- inverter, UPS, AVR, and charger in one device\u003cbr\/\u003e- clear color LED display showing the operating status of the inverter and MPPT\u003cbr\/\u003e- high efficiency due to toroidal transformer construction\u003cbr\/\u003e- high charging current\u003cbr\/\u003e- protection against overload, short circuit, overcharge, and reverse polarity\u003cbr\/\u003e- active cooling: fan\u003cbr\/\u003e- socket type: French\u003cbr\/\u003e- warning for: overload, low voltage\u003cbr\/\u003e\u003cbr\/\u003e\u003cbr\/\u003eTechnical Parameters:\u003cbr\/\u003e\u003cbr\/\u003e- PV regulator: MPPT\u003cbr\/\u003e- rated capacity: 800VA\u003cbr\/\u003e- rated power: 500W\u003cbr\/\u003e- transformer: toroid\u003cbr\/\u003e- dual LED display\u003cbr\/\u003e- operating mode: (PV - BAT - AC) \/ (PV - AC -BAT) \/ (AC - PV - BAT)\u003cbr\/\u003e\u003cbr\/\u003ePV\u003cbr\/\u003e- input voltage: 15 - 75 V DC\u003cbr\/\u003e- max. charging current: 30 A\u003cbr\/\u003e- max. conversion efficiency: 98%\u003cbr\/\u003e- regulator: MPPT\u003cbr\/\u003e\u003cbr\/\u003eAC\u003cbr\/\u003e- input voltage range: 140 - 275 V AC\u003cbr\/\u003e- input frequency range: 45 - 65 Hz\u003cbr\/\u003e- output voltage range: 195 - 240 V AC\u003cbr\/\u003e- charging current: 10 A\u003cbr\/\u003e\u003cbr\/\u003eInverter\u003cbr\/\u003e- output voltage: 230 V ±3%\u003cbr\/\u003e- frequency: 50 \/ 60 Hz\u003cbr\/\u003e- output power factor: ?0.8\u003cbr\/\u003e- efficiency: ?80%\u003cbr\/\u003e\u003cbr\/\u003e\u003cbr\/\u003eBattery\u003cbr\/\u003e- voltage: 12 V DC\u003cbr\/\u003e- type: AGM, GEL, flooded (not included in the product)\u003cbr\/\u003e- charger: built-in\u003cbr\/\u003e- backup system response time: 4 - 6 ms\u003cbr\/\u003e\u003cbr\/\u003e- mounting: wall-mounted\u003cbr\/\u003e- color: white\u003cbr\/\u003e- operating temperature: 0 ~ 40°C\u003cbr\/\u003e- relative humidity: 10% ~ 90%\u003cbr\/\u003e- storage temperature: -15°~ 45°C\u003cbr\/\u003e- cable length to battery: 2 x 75 cm, M8\u003cbr\/\u003e- dimensions: 241x343x102 mm\u003cbr\/\u003e\u003cbr\/\u003e- Weight: 5.9 kg\u003cbr\/\u003e\u003cbr\/\u003ePackaging: 1 pc\/box, 2 pcs\/carton\u003cbr\/\u003eCarton weight: 13 kg","brand":"GETI","offers":[{"title":"Default Title","offer_id":52541952983378,"sku":"04230630","price":2899.0,"currency_code":"CZK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0954\/9624\/1490\/files\/04230630_c889ab66-e150-4239-ae6f-fc271429d3c5.png?v=1776148146"},{"product_id":"zdroj-zalozni-kemot-prosinus-800-12v-230v-800va-500w-white","title":"Backup power supply KEMOT PROsinus-800 12V 230V 800VA 500W White","description":"Many homes have devices that make our daily lives easier, but require constant power to function properly. In winter, furnaces, pumps and other installations that provide heating of the house deserve special attention among this type of equipment. Therefore, in the event of a power failure, it pays to have an emergency power source.\u003cbr\/\u003e\u003cbr\/\u003eHome emergency power\u003cbr\/\u003eKEMOT emergency power systems protect selected equipment from power outages that may result in disruption or interruption of their operation.\u003cbr\/\u003e\u003cbr\/\u003eAre you wondering which UPS to choose for a gas boiler, or maybe you are interested in a UPS for an eco-pea or pellet stove? The KEMOT PROsinus range of devices is perfectly suited as an emergency source for central heating pumps or pumps in fireplace installations, as well as induction motors or, for example, devices for automating installations using heat convectors and all devices extremely sensitive to the slightest changes. in the form of voltage. Their advantage is a clean sinusoidal course of the output voltage (supplying the load), thanks to which the device ensures stable operation, preventing the influence of overheating of inductive loads. Together with the 12V battery, it forms a complete power supply with a guarantee of 230 VAC.\u003cbr\/\u003e\u003cbr\/\u003eHome uninterruptible power supply - application\u003cbr\/\u003eEmergency power supply to furnaces\u003cbr\/\u003eRTV equipment (televisions, tuners, hi-fi, DVD)\u003cbr\/\u003eHome appliances (refrigerators, blenders)\u003cbr\/\u003ePower tools (drills, grinders)\u003cbr\/\u003ePower for chargers (smartphones, tablets, phones, laptops)\u003cbr\/\u003ePumps, compressors (water, heat, air conditioning)\u003cbr\/\u003eOffice equipment (faxes, computers, monitors)\u003cbr\/\u003e\u003cbr\/\u003eSafe emergency power at home\u003cbr\/\u003eKEMOT emergency power supplies have protection against overload, short circuit and too high and too low voltage. Thanks to this, they guarantee safe work in your home.\u003cbr\/\u003e\u003cbr\/\u003eThree operating modes\u003cbr\/\u003eThe emergency power mode with charging function converts the 12V DC voltage supplied from the external battery to 230V AC voltage and charges the external battery. Charger mode charges an external battery. Converter mode converts 12V DC voltage from the battery to 230V AC voltage.\u003cbr\/\u003e\u003cbr\/\u003eConstant phase uninterruptible power supply\u003cbr\/\u003eThe KEMOT emergency power supply works with devices equipped with phase detection, such as some models of gas furnaces. The phase in our device is in a fixed place, regardless of whether it is powered from a mains socket or from a battery.\u003cbr\/\u003e\u003cbr\/\u003eClear LED display\u003cbr\/\u003eKEMOT PROSinus emergency sources are equipped with a clear LED display that shows the current operating status of the device. On the display you can check, among other things: input voltage, output voltage and frequency. In addition, you can quickly check the load level and battery level.\u003cbr\/\u003e\u003cbr\/\u003eTechnical parameters:\u003cbr\/\u003e\u003cbr\/\u003eRated power: 500 W\u003cbr\/\u003eBattery type: 12 V DC\u003cbr\/\u003eMaximum battery voltage: 15 V DC\u003cbr\/\u003eInput voltage range: 190 - 260 V AC\u003cbr\/\u003eInput frequency: 45 - 60 Hz\u003cbr\/\u003eOutput voltage range: 230 V AC +\/-5% \/ Converter: 230 VAC +\/-3%\u003cbr\/\u003eOutput frequency: 50\/60 Hz +\/-0.5 Hz\u003cbr\/\u003eOutput voltage shape: Pure sine wave\u003cbr\/\u003eOutput efficiency: \u003e= 85% (DC to AC)\u003cbr\/\u003eBattery charging current: 10 A\u003cbr\/\u003eBattery capacity: 50 -. 200 Ah (recommended: 80 Ah)\u003cbr\/\u003eEstimated charging time: 4-14 hours (depending on battery capacity)\u003cbr\/\u003eSwitching time: =\u003c 4 ms\u003cbr\/\u003eProtection: Against overload, short circuit, too high or too low voltage\u003cbr\/\u003ePermissible operating temperature: 0 - 40 °C\u003cbr\/\u003ePermissible humidity: 10 - 90%\u003cbr\/\u003eDimensions: 14.5 x 18 x 24 cm\u003cbr\/\u003eWeight: 4.6 kg","brand":"KEMOT","offers":[{"title":"Default Title","offer_id":52541962387794,"sku":"08840298","price":2435.0,"currency_code":"CZK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0954\/9624\/1490\/files\/08840298.png?v=1772442610"},{"product_id":"zdroj-zalozni-kemot-prosinus-1000-12v-230v-1000va-700w-white","title":"Backup power supply KEMOT PROsinus-1000 12V 230V 1000VA 700W White","description":"Many homes have devices that make our daily lives easier, but require constant power to function properly. In winter, furnaces, pumps and other installations that provide heating of the house deserve special attention among this type of equipment. Therefore, in the event of a power failure, it pays to have an emergency power source.\u003cbr\/\u003e\u003cbr\/\u003eHome emergency power\u003cbr\/\u003eKEMOT emergency power systems protect selected equipment from power outages that may result in disruption or interruption of their operation.\u003cbr\/\u003e\u003cbr\/\u003eAre you wondering which UPS to choose for a gas boiler, or maybe you are interested in a UPS for an eco-pea or pellet stove? The KEMOT PROsinus range of devices is perfectly suited as an emergency source for central heating pumps or pumps in fireplace installations, as well as induction motors or, for example, devices for automating installations using heat convectors and all devices extremely sensitive to the slightest changes. in the form of voltage. Their advantage is a clean sinusoidal course of the output voltage (supplying the load), thanks to which the device ensures stable operation, preventing the influence of overheating of inductive loads. Together with the 12V battery, it forms a complete power supply with a guarantee of 230 VAC.\u003cbr\/\u003e\u003cbr\/\u003eHome uninterruptible power supply - application\u003cbr\/\u003eEmergency power supply to furnaces\u003cbr\/\u003eRTV equipment (televisions, tuners, hi-fi, DVD)\u003cbr\/\u003eHome appliances (refrigerators, blenders)\u003cbr\/\u003ePower tools (drills, grinders)\u003cbr\/\u003ePower for chargers (smartphones, tablets, phones, laptops)\u003cbr\/\u003ePumps, compressors (water, heat, air conditioning)\u003cbr\/\u003eOffice equipment (faxes, computers, monitors)\u003cbr\/\u003e\u003cbr\/\u003eSafe emergency power at home\u003cbr\/\u003eKEMOT emergency power supplies have protection against overload, short circuit and too high and too low voltage. Thanks to this, they guarantee safe work in your home.\u003cbr\/\u003e\u003cbr\/\u003eThree operating modes\u003cbr\/\u003eThe emergency power mode with charging function converts the 12V DC voltage supplied from the external battery to 230V AC voltage and charges the external battery. Charger mode charges an external battery. Converter mode converts 12V DC voltage from the battery to 230V AC voltage.\u003cbr\/\u003e\u003cbr\/\u003eConstant phase uninterruptible power supply\u003cbr\/\u003eThe KEMOT emergency power supply works with devices equipped with phase detection, such as some models of gas furnaces. The phase in our device is in a fixed place, regardless of whether it is powered from a mains socket or from a battery.\u003cbr\/\u003e\u003cbr\/\u003eClear LED display\u003cbr\/\u003eKEMOT PROSinus emergency sources are equipped with a clear LED display that shows the current operating status of the device. On the display you can check, among other things: input voltage, output voltage and frequency. In addition, you can quickly check the load level and battery level.\u003cbr\/\u003e\u003cbr\/\u003eTechnical parameters:\u003cbr\/\u003e\u003cbr\/\u003eRated power: 700 W\u003cbr\/\u003eBattery type: 12 V DC\u003cbr\/\u003eMaximum battery voltage: 15 V DC\u003cbr\/\u003eInput voltage range: 190 - 260 V AC\u003cbr\/\u003eInput frequency: 45 ~ 60 Hz\u003cbr\/\u003eOutput voltage range: 230 V AC +\/-5% \/ Converter: 230 VAC +\/-3%\u003cbr\/\u003eOutput frequency: 50\/60 Hz +\/-0.5 Hz\u003cbr\/\u003eOutput voltage shape: Pure sine wave\u003cbr\/\u003eOutput efficiency: \u003e=85% (DC to AC)\u003cbr\/\u003eBattery charging current: 10 A\u003cbr\/\u003eBattery capacity: 50 -. 200 Ah (recommended: 100 Ah)\u003cbr\/\u003eEstimated charging time: 4-14 hours (depending on battery capacity)\u003cbr\/\u003eSwitching time: \u003c= 4 ms\u003cbr\/\u003eProtection: Against overload, short circuit, too high or too low voltage\u003cbr\/\u003ePermissible operating temperature: 0 - 40 °C\u003cbr\/\u003ePermissible humidity 10 - 90%\u003cbr\/\u003eDimensions: 14.5 x 18 x 34 cm\u003cbr\/\u003eWeight: 6.95 kg","brand":"KEMOT","offers":[{"title":"Default Title","offer_id":52541962649938,"sku":"08840300","price":2849.0,"currency_code":"CZK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0954\/9624\/1490\/files\/08840300.png?v=1769141833"},{"product_id":"zdroj-zalozni-kemot-prosinus-1500-lfp4-12v-230v-1500va-1050w-black-urz3427-12-lfp4","title":"Backup power supply KEMOT PROsinus-1500-LFP4 12V 230V 1500VA 1050W Black URZ3427-12-LFP4","description":"Emergency power supply KEMOT PROsinus-1500-LFP4\u003cbr\/\u003e\u003cbr\/\u003eTechnical parameters:\u003cbr\/\u003e\u003cbr\/\u003eRated power: 1050 W\u003cbr\/\u003eBattery type: 12 V DC\u003cbr\/\u003eMaximum battery voltage: 15 V DC\u003cbr\/\u003eInput voltage range: 190 - 260 V AC\u003cbr\/\u003eInput frequency: 45 - 60 Hz\u003cbr\/\u003eOutput voltage range: 206 - 242 V AC +\/-5% \/ Inverter: 230 V AC +\/-3%\u003cbr\/\u003eOutput frequency: 50\/60 Hz +\/-0.5 Hz\u003cbr\/\u003eOutput voltage shape: Pure sine wave\u003cbr\/\u003eOutput efficiency: \u003e= 85% (DC to AC)\u003cbr\/\u003eBattery charging current: Max. 20 A\u003cbr\/\u003eBattery capacity: 50–200 Ah (recommended: 55 Ah)\u003cbr\/\u003eEstimated charging time: 4–14 hours (depending on battery capacity)\u003cbr\/\u003eTransmission time: =\u003c 4 ms\u003cbr\/\u003eProtections: Overload, short circuit, overvoltage, undervoltage\u003cbr\/\u003ePermissible operating temperature: 0–40 °C\u003cbr\/\u003ePermissible humidity: 10–90%\u003cbr\/\u003eWeight: 3.95 kg\u003cbr\/\u003eDimensions: 138 x 226 x 155 mm","brand":"KEMOT","offers":[{"title":"Default Title","offer_id":52541965533522,"sku":"08840407","price":3575.0,"currency_code":"CZK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0954\/9624\/1490\/files\/08840407.jpg?v=1783492550"},{"product_id":"zdroj-zalozni-kemot-prosinus-500-lfp4-12v-230v-500va-300w-black","title":"Backup power supply KEMOT PROsinus-500-LFP4 12V 230V 500VA 300W Black","description":"Home emergency power\u003cbr\/\u003eKEMOT emergency power systems protect selected equipment from power outages that may result in disruption or interruption of their operation.\u003cbr\/\u003e\u003cbr\/\u003eAre you wondering which UPS to choose for a gas boiler, or maybe you are interested in a UPS for an eco-pea or pellet stove? The KEMOT PROsinus range of devices is perfectly suited as an emergency source for central heating pumps or pumps in fireplace installations, as well as induction motors or, for example, devices for automating installations using heat convectors and all devices extremely sensitive to the slightest changes. in the form of voltage. Their advantage is a clean sinusoidal course of the output voltage (supplying the load), thanks to which the device ensures stable operation, preventing the influence of overheating of inductive loads. Together with the 12V battery, it forms a complete power supply with a guarantee of 230 VAC.\u003cbr\/\u003e\u003cbr\/\u003eHome uninterruptible power supply - application\u003cbr\/\u003eEmergency power supply to furnaces\u003cbr\/\u003eRTV equipment (televisions, tuners, hi-fi, DVD)\u003cbr\/\u003eHome appliances (refrigerators, blenders)\u003cbr\/\u003ePower tools (drills, grinders)\u003cbr\/\u003ePower for chargers (smartphones, tablets, phones, laptops)\u003cbr\/\u003ePumps, compressors (water, heat, air conditioning)\u003cbr\/\u003eOffice equipment (faxes, computers, monitors)\u003cbr\/\u003e\u003cbr\/\u003eSafe emergency power at home\u003cbr\/\u003eKEMOT emergency power supplies have protection against overload, short circuit and too high and too low voltage. Thanks to this, they guarantee safe work in your home.\u003cbr\/\u003e\u003cbr\/\u003eThree operating modes\u003cbr\/\u003eThe emergency power mode with charging function converts the 12V DC voltage supplied from the external battery to 230V AC voltage and charges the external battery. Charger mode charges an external battery. Converter mode converts 12V DC voltage from the battery to 230V AC voltage.\u003cbr\/\u003e\u003cbr\/\u003eConstant phase uninterruptible power supply\u003cbr\/\u003eThe KEMOT emergency power supply works with devices equipped with phase detection, such as some models of gas furnaces. The phase in our device is in a fixed place, regardless of whether it is powered from a mains socket or from a battery.\u003cbr\/\u003e\u003cbr\/\u003eReliability and security\u003cbr\/\u003eThe KEMOT PROsinus-500-LFP4 backup power supply is equipped with a set of copper cables that guarantee efficient power flow, minimize losses and ensure fast charging. Their solid construction protects against overloads and overvoltages, thus protecting both the devices connected to the source and the source itself. The cables are easy to install and use, which increases the comfort of use and the reliability of the equipment operation at key moments.\u003cbr\/\u003e\u003cbr\/\u003eLiFePo4 emergency power supply\u003cbr\/\u003eThe BAT TYPE feature in the KEMOT PROsinus-500-LFP4 power supply enables a cable set that supports both gel and lithium phosphate (LiFePo4) charging. This allows you to optimally adjust the charging parameters, which translates into a longer service life. LiFePo4 charges faster, allowing for faster full device operation with minimal downtime.\u003cbr\/\u003e\u003cbr\/\u003eClear LED display\u003cbr\/\u003eKEMOT PROSinus emergency sources are equipped with a clear LED display that shows the current operating status of the device. On the display you can check, among other things: input voltage, output voltage and frequency. In addition, you can quickly check the load level and battery level.\u003cbr\/\u003e\u003cbr\/\u003eTechnical parameters:\u003cbr\/\u003e\u003cbr\/\u003eRated power: 300 W\u003cbr\/\u003eBattery type: 12 V DC\u003cbr\/\u003eMaximum battery voltage: 15 V DC\u003cbr\/\u003eInput voltage range: 190 - 260 V AC\u003cbr\/\u003eInput frequency: 45 - 60 Hz\u003cbr\/\u003eOutput voltage range: 190 - 245 V AC +\/-5% \/ Inverter: 230 VAC +\/-3%\u003cbr\/\u003eOutput frequency: 50\/60 Hz +\/-0.5 Hz\u003cbr\/\u003eOutput voltage shape: Pure sine wave\u003cbr\/\u003eOutput efficiency: \u003e= 85% (DC to AC)\u003cbr\/\u003eBattery charging current: 10 A\u003cbr\/\u003eBattery capacity: Max. 50-200 Ah (recommended: 55 Ah)\u003cbr\/\u003eEstimated charging time: 4-14 hours (depending on battery capacity)\u003cbr\/\u003eSwitching time: =\u003c 4 ms\u003cbr\/\u003eProtection: Against overload, short circuit, too high or too low voltage\u003cbr\/\u003ePermissible operating temperature: 0 - 40°C\u003cbr\/\u003ePermissible humidity: 10 - 90%\u003cbr\/\u003eWeight: 3.95 kg\u003cbr\/\u003eDimensions: 138 x 226 x 155 mm","brand":"KEMOT","offers":[{"title":"Default Title","offer_id":52541965697362,"sku":"08840387","price":2180.0,"currency_code":"CZK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0954\/9624\/1490\/files\/08840387_e39edb59-091c-4163-89c3-d9bda19a553b.png?v=1776148596"},{"product_id":"zdroj-zalozni-kemot-prosinus-800-lfp4-12v-230v-800va-500w-black","title":"Backup power supply KEMOT PROsinus-800-LFP4 12V 230V 800VA 500W Black","description":"Home emergency power\u003cbr\/\u003eKEMOT emergency power systems protect selected equipment from power outages that may result in disruption or interruption of their operation.\u003cbr\/\u003e\u003cbr\/\u003eAre you wondering which UPS to choose for a gas boiler, or maybe you are interested in a UPS for an eco-pea or pellet stove? The KEMOT PROsinus range of devices is perfectly suited as an emergency source for central heating pumps or pumps in fireplace installations, as well as induction motors or, for example, devices for automating installations using heat convectors and all devices extremely sensitive to the slightest changes. in the form of voltage. Their advantage is a clean sinusoidal course of the output voltage (supplying the load), thanks to which the device ensures stable operation, preventing the influence of overheating of inductive loads. Together with the 12V battery, it forms a complete power supply with a guarantee of 230 VAC.\u003cbr\/\u003e\u003cbr\/\u003eHome uninterruptible power supply - application\u003cbr\/\u003eEmergency power supply to furnaces\u003cbr\/\u003eRTV equipment (televisions, tuners, hi-fi, DVD)\u003cbr\/\u003eHome appliances (refrigerators, blenders)\u003cbr\/\u003ePower tools (drills, grinders)\u003cbr\/\u003ePower for chargers (smartphones, tablets, phones, laptops)\u003cbr\/\u003ePumps, compressors (water, heat, air conditioning)\u003cbr\/\u003eOffice equipment (faxes, computers, monitors)\u003cbr\/\u003e\u003cbr\/\u003eSafe emergency power at home\u003cbr\/\u003eKEMOT emergency power supplies have protection against overload, short circuit and too high and too low voltage. Thanks to this, they guarantee safe work in your home.\u003cbr\/\u003e\u003cbr\/\u003eThree operating modes\u003cbr\/\u003eThe emergency power mode with charging function converts the 12V DC voltage supplied from the external battery to 230V AC voltage and charges the external battery. Charger mode charges an external battery. Converter mode converts 12V DC voltage from the battery to 230V AC voltage.\u003cbr\/\u003e\u003cbr\/\u003eConstant phase uninterruptible power supply\u003cbr\/\u003eThe KEMOT emergency power supply works with devices equipped with phase detection, such as some models of gas furnaces. The phase in our device is in a fixed place, regardless of whether it is powered from a mains socket or from a battery.\u003cbr\/\u003e\u003cbr\/\u003eReliability and security\u003cbr\/\u003eThe KEMOT PROsinus-800-LFP4 backup power supply is equipped with a set of copper cables that guarantee efficient power flow, minimize losses and ensure fast charging. Their solid construction protects against overloads and overvoltages, thus protecting both the devices connected to the source and the source itself. The cables are easy to install and use, which increases the comfort of use and the reliability of the equipment operation at key moments.\u003cbr\/\u003e\u003cbr\/\u003eLiFePo4 emergency power supply\u003cbr\/\u003eThe BAT TYPE feature in the KEMOT PROsinus-800-LFP4 power supply enables a cable kit that supports both gel and lithium phosphate (LiFePo4) charging. This allows you to optimally adjust the charging parameters, which translates into a longer service life. LiFePo4 charges faster, allowing for faster full device operation with minimal downtime.\u003cbr\/\u003e\u003cbr\/\u003eClear LED display\u003cbr\/\u003eKEMOT PROSinus emergency sources are equipped with a clear LED display that shows the current operating status of the device. On the display you can check, among other things: input voltage, output voltage and frequency. In addition, you can quickly check the load level and battery level.\u003cbr\/\u003e\u003cbr\/\u003eTechnical parameters:\u003cbr\/\u003e\u003cbr\/\u003eRated power: 500 W\u003cbr\/\u003eBattery type: 12 V DC\u003cbr\/\u003eMaximum battery voltage: 15 V DC\u003cbr\/\u003eInput voltage range: 190 - 260 V AC\u003cbr\/\u003eInput frequency: 45 - 60 Hz\u003cbr\/\u003eOutput voltage range: 190 - 245 V AC +\/-5% \/ Inverter: 230 VAC +\/-3%\u003cbr\/\u003eOutput frequency: 50\/60 Hz +\/-0.5 Hz\u003cbr\/\u003eOutput voltage shape: Pure sine wave\u003cbr\/\u003eOutput efficiency: \u003e= 85% (DC to AC)\u003cbr\/\u003eBattery charging current: 10 A\u003cbr\/\u003eBattery capacity: Max. 50-200 Ah (recommended: 55 Ah)\u003cbr\/\u003eEstimated charging time: 4-14 hours (depending on battery capacity)\u003cbr\/\u003eSwitching time: =\u003c 4 ms\u003cbr\/\u003eProtection: Against overload, short circuit, too high or too low voltage\u003cbr\/\u003ePermissible operating temperature: 0 - 40°C\u003cbr\/\u003ePermissible humidity: 10 - 90%\u003cbr\/\u003eWeight: 4.7 kg\u003cbr\/\u003eDimensions: 138 x 226 x 155 mm","brand":"KEMOT","offers":[{"title":"Default Title","offer_id":52541965861202,"sku":"08840388","price":2155.0,"currency_code":"CZK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0954\/9624\/1490\/files\/08840388_44a90d14-cb99-4bd9-ae58-2b11b6d6a59a.png?v=1776148598"},{"product_id":"zdroj-zalozni-geti-gep501pv-sinus-500w-nastenny-rozbaleno-poskozeny-obal","title":"GETI GEP501PV 500W sine wave wall-mounted backup power supply – unboxed","description":"Erre a termékre 3 év garancia vonatkozik.\u003cbr\/\u003e\u003cbr\/\u003eA tiszta szinuszos kimeneti jellel rendelkező GETI vészhelyzeti tápegység (EPS) olyan eszköz, amely hálózati hiba esetén váltakozó áramforrást biztosít. A beépített MPPT-vezérlőnek köszönhetően a vészhelyzeti tápegység fotovoltaikus panelekhez is csatlakoztatható, és napenergiával látja el a tartalék eszközöket. A vészhelyzeti tápegység alkalmas mindenféle készülék, például keringető szivattyúk, automata kazánok, tápegységek, vészvilágítás, kamerarendszerek és egyéb készülékek tartalékolásához. Háromféle üzemmóddal rendelkezik: (PV-BAT-AC), (PV-AC-BAT) és (AC-PV-BAT). A standard üzemmódban a csatlakoztatott berendezés közvetlenül a hálózatról kap áramot, meghibásodás esetén a vészhelyzeti áramellátó rendszer automatikusan inverteres üzemmódra vált. A csatlakoztatott készüléket ekkor a csatlakoztatott napelemek vagy az akkumulátor táplálja. Abban az esetben, ha az áramellátás nem áll helyre, a vészhelyzeti áramellátó rendszer kikapcsolható, amikor a csatlakoztatott akkumulátor feszültsége körülbelül 10,2V ± 0,3V-ra csökken. Ez megvédi az akkumulátort a mélykisüléstől és az azt követő károsodástól. A vészhelyzeti áramellátás világos színes kijelzővel, beépített akkumulátortöltővel és tiszta szinuszos feszültségátalakítóval van felszerelve. Az inverter kialakítása egy hatékony toroid transzformátoron alapul, gyors 32 bites processzorral.\u003cbr\/\u003e\u003cbr\/\u003eVigyázat: a csatlakoztatott akkumulátor érintkezőit megfelelően védeni kell a következők ellen: személyek, idegen testek érintkezése, a rendszer más részeivel való érintkezés vagy rövidzárlat.\u003cbr\/\u003e\u003cbr\/\u003e\u003cbr\/\u003e\u003cbr\/\u003e- lehetővé teszi a fotovoltaikus panelek csatlakoztatását\u003cbr\/\u003e- állítható prioritás - PV \/ AC \/ akkumulátor\u003cbr\/\u003e- MPPT vezérlő\u003cbr\/\u003e- tiszta szinuszos kimeneti jel\u003cbr\/\u003e- Inverter, UPS, AVR és töltő egy egységben\u003cbr\/\u003e- világos színes LED kijelző, amely az inverter és az MPPT működési állapotát mutatja\u003cbr\/\u003e- Nagy hatékonyság a toroid transzformátor kialakításnak köszönhetően\u003cbr\/\u003e- nagy töltőáram\u003cbr\/\u003e- Túlterhelés-, rövidzárlat-, túlterhelés- és túlfeszültségvédelem\u003cbr\/\u003e- aktív hűtés: ventilátor\u003cbr\/\u003e- aljzat típusa: francia\u003cbr\/\u003e- figyelmeztetés: túlterhelés, alacsony feszültség\u003cbr\/\u003e\u003cbr\/\u003eMűszaki paraméterek:\u003cbr\/\u003e\u003cbr\/\u003e- PV-vezérlő: MPPT\u003cbr\/\u003e- névleges teljesítmény: 800VA\u003cbr\/\u003e- névleges teljesítmény: 500W\u003cbr\/\u003e- transzformátor: toroid\u003cbr\/\u003e- kettős LED kijelző\u003cbr\/\u003e- üzemmód: (PV - BAT - AC) \/ (PV - AC - BAT) \/ (AC - PV - BAT) \/ (AC - PV - BAT)\u003cbr\/\u003e- üresjárati fogyasztás: hálózat 0,2 A (kb. 55 W), akkumulátor 1,1 A (13,2 W)\u003cbr\/\u003e\u003cbr\/\u003ePV\u003cbr\/\u003e- bemeneti feszültség: 15 - 75 V DC\u003cbr\/\u003e- max. töltési áram: 30 A\u003cbr\/\u003e- max. konverziós hatásfok: 98 %\u003cbr\/\u003e- vezérlő: MPPT\u003cbr\/\u003e\u003cbr\/\u003eAC\u003cbr\/\u003e- bemeneti feszültségtartomány: 140-275 V AC\u003cbr\/\u003e- Bemeneti frekvenciatartomány: 45 - 65 Hz\u003cbr\/\u003e- Kimeneti feszültségtartomány: 195 - 240 V AC\u003cbr\/\u003e- Töltési áram: 10 A\u003cbr\/\u003e\u003cbr\/\u003eInverter\u003cbr\/\u003e- Kimeneti feszültség: 230 V ±3%\u003cbr\/\u003e- Frekvencia: 50\/60 Hz\u003cbr\/\u003e- Kimeneti teljesítménytényező: ?0,8\u003cbr\/\u003e- hatásfok: ?80%\u003cbr\/\u003e\u003cbr\/\u003eBat.\u003cbr\/\u003e- Feszültség: 12 V DC\u003cbr\/\u003e- Típus: AGM, GEL, elárasztott (nem része a terméknek)\u003cbr\/\u003e- töltő: beépített\u003cbr\/\u003e- válaszidő a tartalék rendszerre: 4-6 ms\u003cbr\/\u003e\u003cbr\/\u003e\u003cbr\/\u003e- felszerelés: falra szerelhető\u003cbr\/\u003e- szín: fehér\u003cbr\/\u003e- üzemi hőmérséklet: 0 ~ 40°C\u003cbr\/\u003e- relatív páratartalom: 10% ~ 90%\u003cbr\/\u003e- tárolási hőmérséklet: -15° ~ 45°C\u003cbr\/\u003e- kábel hossza az akkumulátorhoz: 2 x 75cm, M8\u003cbr\/\u003e- Méret: 241x343x102 mm\u003cbr\/\u003e- súly: 5,9 kg\u003cbr\/\u003e\u003cbr\/\u003e\u003cbr\/\u003eCsomagolás: doboz 1db \/ karton 2 db\u003cbr\/\u003eKarton súlya: 13 kg","brand":"GETI","offers":[{"title":"Default Title","offer_id":52541985685842,"sku":"90329327","price":2799.0,"currency_code":"CZK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0954\/9624\/1490\/files\/90329327.png?v=1776149488"},{"product_id":"zdroj-zalozni-kemot-prosinus-500-12v-230v-500va-300w-black","title":"Backup power supply KEMOT PROsinus-500 12V 230V 500VA 300W Black","description":"Many homes have devices that make our daily lives easier, but require constant power to function properly. In winter, furnaces, pumps and other installations that provide heating of the house deserve special attention among this type of equipment. Therefore, in the event of a power failure, it pays to have an emergency power source.\u003cbr\/\u003e\u003cbr\/\u003eHome emergency power\u003cbr\/\u003eKEMOT emergency power systems protect selected equipment from power outages that may result in disruption or interruption of their operation.\u003cbr\/\u003e\u003cbr\/\u003eAre you wondering which UPS to choose for a gas boiler, or maybe you are interested in a UPS for an eco-pea or pellet stove? The KEMOT PROsinus range of devices is perfectly suited as an emergency source for central heating pumps or pumps in fireplace installations, as well as induction motors or, for example, devices for automating installations using heat convectors and all devices extremely sensitive to the slightest changes. in the form of voltage. Their advantage is a clean sinusoidal course of the output voltage (supplying the load), thanks to which the device ensures stable operation, preventing the influence of overheating of inductive loads. Together with the 12V battery, it forms a complete power supply with a guarantee of 230 VAC.\u003cbr\/\u003e\u003cbr\/\u003eEmergency power source KEMOT PROsinus 500\u003cbr\/\u003e500 VA \/ 300 W\u003cbr\/\u003eRated power: 300W\u003cbr\/\u003eBattery type: 12 V DC\u003cbr\/\u003eInput voltage: 190 - 260 V AC\u003cbr\/\u003eOutput voltage: 230V AC +\/-5%\u003cbr\/\u003eOutput voltage shape: pure sine wave\u003cbr\/\u003eBattery charging current: max\u003cbr\/\u003eSwitching time: =\u003c 4 ms\u003cbr\/\u003e\u003cbr\/\u003eHome uninterruptible power supply - application\u003cbr\/\u003eEmergency power supply to furnaces\u003cbr\/\u003eRTV equipment (televisions, tuners, hi-fi, DVD)\u003cbr\/\u003eHome appliances (refrigerators, blenders)\u003cbr\/\u003ePower tools (drills, grinders)\u003cbr\/\u003ePower for chargers (smartphones, tablets, phones, laptops)\u003cbr\/\u003ePumps, compressors (water, heat, air conditioning)\u003cbr\/\u003eOffice equipment (faxes, computers, monitors)\u003cbr\/\u003e\u003cbr\/\u003eSafe emergency power at home\u003cbr\/\u003eKEMOT emergency power supplies have protection against overload, short circuit and too high and too low voltage. Thanks to this, they guarantee safe work in your home.\u003cbr\/\u003e\u003cbr\/\u003eThree operating modes\u003cbr\/\u003eThe emergency power mode with charging function converts the 12V DC voltage supplied from the external battery to 230V AC voltage and charges the external battery. Charger mode charges an external battery. Converter mode converts 12V DC voltage from the battery to 230V AC voltage.\u003cbr\/\u003e\u003cbr\/\u003eConstant phase uninterruptible power supply\u003cbr\/\u003eThe KEMOT emergency power supply works with devices equipped with phase detection, such as some models of gas furnaces. The phase in our device is in a fixed place, regardless of whether it is powered from a mains socket or from a battery.\u003cbr\/\u003e\u003cbr\/\u003eClear LED display\u003cbr\/\u003eKEMOT PROSinus emergency sources are equipped with a clear LED display that shows the current operating status of the device. On the display you can check, among other things: input voltage, output voltage and frequency. In addition, you can quickly check the load level and battery level\u003cbr\/\u003e\u003cbr\/\u003eTechnical parameters:\u003cbr\/\u003e\u003cbr\/\u003eRated power: 300 W\u003cbr\/\u003eBattery type: 12 V DC\u003cbr\/\u003eMaximum battery voltage: 15 V DC\u003cbr\/\u003eInput voltage range: 190 - 260 V AC\u003cbr\/\u003eInput frequency: 45 - 60 Hz\u003cbr\/\u003eOutput voltage range: 230 V AC +\/-5% \/ Converter: 230 VAC +\/-3%\u003cbr\/\u003eOutput frequency: 50\/60 Hz +\/-0.5 Hz\u003cbr\/\u003eOutput voltage shape: Pure sine wave\u003cbr\/\u003eOutput efficiency: \u003e= 85% (DC to AC)\u003cbr\/\u003eBattery charging current: 10 A\u003cbr\/\u003eBattery capacity: 50 -. 200 Ah (recommended: 55 Ah)\u003cbr\/\u003eEstimated charging time: 4-14 hours (depending on battery capacity)\u003cbr\/\u003eSwitching time: =\u003c 4 ms\u003cbr\/\u003eProtection: Against overload, short circuit, too high or too low voltage\u003cbr\/\u003ePermissible operating temperature: 0 - 40 °C\u003cbr\/\u003ePermissible humidity: 10 - 90%\u003cbr\/\u003eDimensions: 14.5 x 18 x 24 cm\u003cbr\/\u003eWeight: 4.3 kg","brand":"KEMOT","offers":[{"title":"Default Title","offer_id":52553260499282,"sku":"08840225","price":1880.0,"currency_code":"CZK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0954\/9624\/1490\/files\/08840225_2b448cd2-d1a2-4322-af96-1e6b996672a7.png?v=1769241296"},{"product_id":"zdroj-zalozni-kemot-prosinus-800-12v-230v-800va-500w-black","title":"Zdroj záložní KEMOT PROsinus-800 12V 230V 800VA 500W Black","description":"Many homes have devices that make our daily lives easier, but require constant power to function properly. In winter, furnaces, pumps and other installations that provide heating of the house deserve special attention among this type of equipment. Therefore, in the event of a power failure, it pays to have an emergency power source.\u003cbr\/\u003e\u003cbr\/\u003eHome emergency power\u003cbr\/\u003eKEMOT emergency power systems protect selected equipment from power outages that may result in disruption or interruption of their operation.\u003cbr\/\u003e\u003cbr\/\u003eAre you wondering which UPS to choose for a gas boiler, or maybe you are interested in a UPS for an eco-pea or pellet stove? The KEMOT PROsinus range of devices is perfectly suited as an emergency source for central heating pumps or pumps in fireplace installations, as well as induction motors or, for example, devices for automating installations using heat convectors and all devices extremely sensitive to the slightest changes. in the form of voltage. Their advantage is a clean sinusoidal course of the output voltage (supplying the load), thanks to which the device ensures stable operation, preventing the influence of overheating of inductive loads. Together with the 12V battery, it forms a complete power supply with a guarantee of 230 VAC.\u003cbr\/\u003e\u003cbr\/\u003eHome uninterruptible power supply - application\u003cbr\/\u003eEmergency power supply to furnaces\u003cbr\/\u003eRTV equipment (televisions, tuners, hi-fi, DVD)\u003cbr\/\u003eHome appliances (refrigerators, blenders)\u003cbr\/\u003ePower tools (drills, grinders)\u003cbr\/\u003ePower for chargers (smartphones, tablets, phones, laptops)\u003cbr\/\u003ePumps, compressors (water, heat, air conditioning)\u003cbr\/\u003eOffice equipment (faxes, computers, monitors)\u003cbr\/\u003e\u003cbr\/\u003eSafe emergency power at home\u003cbr\/\u003eKEMOT emergency power supplies have protection against overload, short circuit and too high and too low voltage. Thanks to this, they guarantee safe work in your home.\u003cbr\/\u003e\u003cbr\/\u003eThree operating modes\u003cbr\/\u003eThe emergency power mode with charging function converts the 12V DC voltage supplied from the external battery to 230V AC voltage and charges the external battery. Charger mode charges an external battery. Converter mode converts 12V DC voltage from the battery to 230V AC voltage.\u003cbr\/\u003e\u003cbr\/\u003eConstant phase uninterruptible power supply\u003cbr\/\u003eThe KEMOT emergency power supply works with devices equipped with phase detection, such as some models of gas furnaces. The phase in our device is in a fixed place, regardless of whether it is powered from a mains socket or from a battery.\u003cbr\/\u003e\u003cbr\/\u003eClear LED display\u003cbr\/\u003eKEMOT PROSinus emergency sources are equipped with a clear LED display that shows the current operating status of the device. On the display you can check, among other things: input voltage, output voltage and frequency. In addition, you can quickly check the load level and battery level.\u003cbr\/\u003e\u003cbr\/\u003eTechnical parameters:\u003cbr\/\u003e\u003cbr\/\u003eRated power: 500 W\u003cbr\/\u003eBattery type: 12 V DC\u003cbr\/\u003eMaximum battery voltage: 15 V DC\u003cbr\/\u003eInput voltage range: 190 - 260 V AC\u003cbr\/\u003eInput frequency: 45 - 60 Hz\u003cbr\/\u003eOutput voltage range: 230 V AC +\/-5% \/ Converter: 230 VAC +\/-3%\u003cbr\/\u003eOutput frequency: 50\/60 Hz +\/-0.5 Hz\u003cbr\/\u003eOutput voltage shape: Pure sine wave\u003cbr\/\u003eOutput efficiency: \u003e= 85% (DC to AC)\u003cbr\/\u003eBattery charging current: 10 A\u003cbr\/\u003eBattery capacity: 50 -. 200 Ah (recommended: 80 Ah)\u003cbr\/\u003eEstimated charging time: 4-14 hours (depending on battery capacity)\u003cbr\/\u003eSwitching time: =\u003c 4 ms\u003cbr\/\u003eProtection: Against overload, short circuit, too high or too low voltage\u003cbr\/\u003ePermissible operating temperature: 0 - 40 °C\u003cbr\/\u003ePermissible humidity: 10 - 90%\u003cbr\/\u003eDimensions: 14.5 x 18 x 24 cm\u003cbr\/\u003eWeight: 4.6 kg","brand":"KEMOT","offers":[{"title":"Default Title","offer_id":52553260597586,"sku":"08840226","price":2399.0,"currency_code":"CZK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0954\/9624\/1490\/files\/08840226_529381ee-3888-45f6-98b9-b5dbc64d5d4a.png?v=1769241297"},{"product_id":"zdroj-zalozni-kemot-prosinus-1000-12v-230v-1000va-700w-black","title":"Backup power supply KEMOT PROsinus-1000 12V 230V 1000VA 700W Black","description":"Many homes have devices that make our daily lives easier, but require constant power to function properly. In winter, furnaces, pumps and other installations that provide heating of the house deserve special attention among this type of equipment. Therefore, in the event of a power failure, it pays to have an emergency power source.\u003cbr\/\u003e\u003cbr\/\u003eHome emergency power\u003cbr\/\u003eKEMOT emergency power systems protect selected equipment from power outages that may result in disruption or interruption of their operation.\u003cbr\/\u003e\u003cbr\/\u003eAre you wondering which UPS to choose for a gas boiler, or maybe you are interested in a UPS for an eco-pea or pellet stove? The KEMOT PROsinus range of devices is perfectly suited as an emergency source for central heating pumps or pumps in fireplace installations, as well as induction motors or, for example, devices for automating installations using heat convectors and all devices extremely sensitive to the slightest changes. in the form of voltage. Their advantage is a clean sinusoidal course of the output voltage (supplying the load), thanks to which the device ensures stable operation, preventing the influence of overheating of inductive loads. Together with the 12V battery, it forms a complete power supply with a guarantee of 230 VAC.\u003cbr\/\u003e\u003cbr\/\u003eHome uninterruptible power supply - application\u003cbr\/\u003eEmergency power supply to furnaces\u003cbr\/\u003eRTV equipment (televisions, tuners, hi-fi, DVD)\u003cbr\/\u003eHome appliances (refrigerators, blenders)\u003cbr\/\u003ePower tools (drills, grinders)\u003cbr\/\u003ePower for chargers (smartphones, tablets, phones, laptops)\u003cbr\/\u003ePumps, compressors (water, heat, air conditioning)\u003cbr\/\u003eOffice equipment (faxes, computers, monitors)\u003cbr\/\u003e\u003cbr\/\u003eSafe emergency power at home\u003cbr\/\u003eKEMOT emergency power supplies have protection against overload, short circuit and too high and too low voltage. Thanks to this, they guarantee safe work in your home.\u003cbr\/\u003e\u003cbr\/\u003eThree operating modes\u003cbr\/\u003eThe emergency power mode with charging function converts the 12V DC voltage supplied from the external battery to 230V AC voltage and charges the external battery. Charger mode charges an external battery. Converter mode converts 12V DC voltage from the battery to 230V AC voltage.\u003cbr\/\u003e\u003cbr\/\u003eConstant phase uninterruptible power supply\u003cbr\/\u003eThe KEMOT emergency power supply works with devices equipped with phase detection, such as some models of gas furnaces. The phase in our device is in a fixed place, regardless of whether it is powered from a mains socket or from a battery.\u003cbr\/\u003e\u003cbr\/\u003eClear LED display\u003cbr\/\u003eKEMOT PROSinus emergency sources are equipped with a clear LED display that shows the current operating status of the device. On the display you can check, among other things: input voltage, output voltage and frequency. In addition, you can quickly check the load level and battery level.\u003cbr\/\u003e\u003cbr\/\u003eTechnical parameters:\u003cbr\/\u003e\u003cbr\/\u003eRated power: 700 W\u003cbr\/\u003eBattery type: 12 V DC\u003cbr\/\u003eMaximum battery voltage: 15 V DC\u003cbr\/\u003eInput voltage range: 190 - 260 V AC\u003cbr\/\u003eInput frequency: 45 ~ 60 Hz\u003cbr\/\u003eOutput voltage range: 230 V AC +\/-5% \/ 230 V AC +\/-3%\u003cbr\/\u003eOutput frequency: 50\/60 Hz +\/-0.5 Hz\u003cbr\/\u003eOutput voltage shape: Pure sine wave\u003cbr\/\u003eOutput efficiency: \u003e=85% (DC to AC)\u003cbr\/\u003eBattery charging current: Max (recommended: 100 Ah)\u003cbr\/\u003eEstimated charging time: 4-14 hours (depending on battery capacity)\u003cbr\/\u003eSwitching time: \u003c= 4 ms\u003cbr\/\u003eProtection: Against overload, short circuit, too high or too low voltage\u003cbr\/\u003ePermissible operating temperature: 0 - 40°C\u003cbr\/\u003ePermissible humidity 10 - 90%\u003cbr\/\u003eDimensions: 14.5 x 18 x 34 cm\u003cbr\/\u003eWeight: 6.95 kg","brand":"KEMOT","offers":[{"title":"Default Title","offer_id":52553260663122,"sku":"08840227","price":2849.0,"currency_code":"CZK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0954\/9624\/1490\/files\/08840227.png?v=1769241297"},{"product_id":"zdroj-zalozni-kemot-prosinus-500-12v-230v-500va-300w-black-nastenny","title":"Backup power supply KEMOT PROsinus-500 12V 230V 500VA 300W Black wall mounted","description":"Many homes have devices that make our daily lives easier, but require constant power to function properly. In winter, furnaces, pumps and other installations that provide heating of the house deserve special attention among this type of equipment. Therefore, in the event of a power failure, it pays to have an emergency power source.\u003cbr\/\u003e\u003cbr\/\u003eHome emergency power\u003cbr\/\u003eKEMOT emergency power systems protect selected equipment from power outages that may result in disruption or interruption of their operation.\u003cbr\/\u003e\u003cbr\/\u003eAre you wondering which UPS to choose for a gas boiler, or maybe you are interested in a UPS for an eco-pea or pellet stove? The KEMOT PROsinus range of devices is perfectly suited as an emergency source for central heating pumps or pumps in fireplace installations, as well as induction motors or, for example, devices for automating installations using heat convectors and all devices extremely sensitive to the slightest changes. in the form of voltage. Their advantage is a clean sinusoidal course of the output voltage (supplying the load), thanks to which the device ensures stable operation, preventing the influence of overheating of inductive loads. Together with the 12V battery, it forms a complete power supply with a guarantee of 230 VAC.\u003cbr\/\u003e\u003cbr\/\u003eHome uninterruptible power supply - application\u003cbr\/\u003eEmergency power supply to furnaces\u003cbr\/\u003eRTV equipment (televisions, tuners, hi-fi, DVD)\u003cbr\/\u003eHome appliances (refrigerators, blenders)\u003cbr\/\u003ePower tools (drills, grinders)\u003cbr\/\u003ePower for chargers (smartphones, tablets, phones, laptops)\u003cbr\/\u003ePumps, compressors (water, heat, air conditioning)\u003cbr\/\u003eOffice equipment (faxes, computers, monitors)\u003cbr\/\u003e\u003cbr\/\u003eSafe emergency power at home\u003cbr\/\u003eKEMOT emergency power supplies have protection against overload, short circuit and too high and too low voltage. Thanks to this, they guarantee safe work in your home.\u003cbr\/\u003e\u003cbr\/\u003eThree operating modes\u003cbr\/\u003eThe emergency power mode with charging function converts the 12V DC voltage supplied from the external battery to 230V AC voltage and charges the external battery. Charger mode charges an external battery. Converter mode converts 12V DC voltage from the battery to 230V AC voltage.\u003cbr\/\u003e\u003cbr\/\u003eConstant phase uninterruptible power supply\u003cbr\/\u003eThe KEMOT emergency power supply works with devices equipped with phase detection, such as some models of gas furnaces. The phase in our device is in a fixed place, regardless of whether it is powered from a mains socket or from a battery.\u003cbr\/\u003e\u003cbr\/\u003eEmergency power supply for stove with battery\u003cbr\/\u003eIn order to ensure the highest quality of operation of the KEMOT emergency power source, you must choose a suitable battery for it. The optimal battery can be selected using an approximate formula: 100 W load = 10 A consumption from the battery.\u003cbr\/\u003e\u003cbr\/\u003eClear LED display\u003cbr\/\u003eKEMOT PROSinus emergency sources are equipped with a clear LED display that shows the current operating status of the device. On the display you can check, among other things: input voltage, output voltage and frequency. In addition, you can quickly check the load level and battery level.\u003cbr\/\u003e\u003cbr\/\u003eTechnical parameters:\u003cbr\/\u003e\u003cbr\/\u003eRated power: 300 W\u003cbr\/\u003eBattery type: 12 V DC\u003cbr\/\u003eMaximum battery voltage: 15 V DC\u003cbr\/\u003eInput voltage range: 180~275V AC\u003cbr\/\u003eInput frequency: 45 ~ 60 Hz\u003cbr\/\u003eOutput voltage range: 230 V AC +\/-8%\u003cbr\/\u003eOutput frequency: 50 \/60 Hz +\/-0.5 Hz\u003cbr\/\u003eOutput voltage shape: Pure sine wave\u003cbr\/\u003eOutput efficiency \u003e=85% (DC to AC)\u003cbr\/\u003eBattery charging current: Max. 10 A\u003cbr\/\u003eBattery capacity: 50-200 Ah (recommended: 55 Ah)\u003cbr\/\u003eSwitching time: \u003c=4 ms\u003cbr\/\u003eProtections: Against overload, short circuit, too high or too low voltage\u003cbr\/\u003ePermissible operating temperature: 0-40°C\u003cbr\/\u003ePermissible humidity 10 - 90%\u003cbr\/\u003eDimensions: 25.5 x 26 x 16 cm\u003cbr\/\u003eWeight: 4.7 kg","brand":"KEMOT","offers":[{"title":"Default Title","offer_id":52553260761426,"sku":"08840228","price":1899.0,"currency_code":"CZK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0954\/9624\/1490\/files\/08840228_d3fea116-ee79-45f7-9266-c24d10ae2042.png?v=1776414925"},{"product_id":"zdroj-zalozni-kemot-prosinus-800-12v-230v-800va-500w-black-nastenny","title":"Backup power supply KEMOT PROsinus-800 12V 230V 800VA 500W Black wall mounted","description":"Many homes have devices that make our daily lives easier, but require constant power to function properly. In winter, furnaces, pumps and other installations that provide heating of the house deserve special attention among this type of equipment. Therefore, in the event of a power failure, it pays to have an emergency power source.\u003cbr\/\u003e\u003cbr\/\u003eHome emergency power\u003cbr\/\u003eKEMOT emergency power systems protect selected equipment from power outages that may result in disruption or interruption of their operation.\u003cbr\/\u003e\u003cbr\/\u003eAre you wondering which UPS to choose for a gas boiler, or maybe you are interested in a UPS for an eco-pea or pellet stove? The KEMOT PROsinus range of devices is perfectly suited as an emergency source for central heating pumps or pumps in fireplace installations, as well as induction motors or, for example, devices for automating installations using heat convectors and all devices extremely sensitive to the slightest changes. in the form of voltage. Their advantage is a clean sinusoidal course of the output voltage (supplying the load), thanks to which the device ensures stable operation, preventing the influence of overheating of inductive loads. Together with the 12V battery, it forms a complete power supply with a guarantee of 230 VAC.\u003cbr\/\u003e\u003cbr\/\u003eHome uninterruptible power supply - application\u003cbr\/\u003eEmergency power supply to furnaces\u003cbr\/\u003eRTV equipment (televisions, tuners, hi-fi, DVD)\u003cbr\/\u003eHome appliances (refrigerators, blenders)\u003cbr\/\u003ePower tools (drills, grinders)\u003cbr\/\u003ePower for chargers (smartphones, tablets, phones, laptops)\u003cbr\/\u003ePumps, compressors (water, heat, air conditioning)\u003cbr\/\u003eOffice equipment (faxes, computers, monitors)\u003cbr\/\u003e\u003cbr\/\u003eSafe emergency power at home\u003cbr\/\u003eKEMOT emergency power supplies have protection against overload, short circuit and too high and too low voltage. Thanks to this, they guarantee safe work in your home.\u003cbr\/\u003e\u003cbr\/\u003eThree operating modes\u003cbr\/\u003eThe emergency power mode with charging function converts the 12V DC voltage supplied from the external battery to 230V AC voltage and charges the external battery. Charger mode charges an external battery. Converter mode converts 12V DC voltage from the battery to 230V AC voltage.\u003cbr\/\u003e\u003cbr\/\u003eConstant phase uninterruptible power supply\u003cbr\/\u003eThe KEMOT emergency power supply works with devices equipped with phase detection, such as some models of gas furnaces. The phase in our device is in a fixed place, regardless of whether it is powered from a mains socket or from a battery.\u003cbr\/\u003e\u003cbr\/\u003eClear LED display\u003cbr\/\u003eKEMOT PROSinus emergency sources are equipped with a clear LED display that shows the current operating status of the device. On the display you can check, among other things: input voltage, output voltage and frequency. In addition, you can quickly check the load level and battery level.\u003cbr\/\u003e\u003cbr\/\u003eTechnical parameters:\u003cbr\/\u003e\u003cbr\/\u003eRated power: 500 W\u003cbr\/\u003eBattery type: 12 V DC\u003cbr\/\u003eMaximum battery voltage: 15 V DC\u003cbr\/\u003eInput voltage range: 180~275V AC\u003cbr\/\u003eInput frequency: 45 ~ 60 Hz\u003cbr\/\u003eOutput voltage range: 230 V AC +\/-8%\u003cbr\/\u003eOutput frequency: 50 \/60 Hz +\/-0.5 Hz\u003cbr\/\u003eOutput voltage shape: Pure sine wave\u003cbr\/\u003eOutput efficiency \u003e=85% (DC to AC)\u003cbr\/\u003eBattery charging current: Max. 10 A\u003cbr\/\u003eBattery capacity: 50-200 Ah (recommended: 80 Ah)\u003cbr\/\u003eSwitching time: \u003c=4 ms\u003cbr\/\u003eProtection: against overload, short circuit, too high or too low voltage\u003cbr\/\u003ePermissible operating temperature: 0-40°C\u003cbr\/\u003ePermissible humidity 10 - 90%\u003cbr\/\u003eDimensions: 25.5x26x16 cm\u003cbr\/\u003eWeight: 5.5 kg","brand":"KEMOT","offers":[{"title":"Default Title","offer_id":52553260925266,"sku":"08840229","price":2699.0,"currency_code":"CZK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0954\/9624\/1490\/files\/08840229_393673d8-622f-419f-a9d3-19445b350ccf.png?v=1776145913"},{"product_id":"zdroj-zalozni-kemot-prosinus-1000-12v-230v-1000va-700w-black-nastenny","title":"Backup power supply KEMOT PROsinus-1000 12V 230V 1000VA 700W Black wall mounted","description":"Many homes have devices that make our daily lives easier, but require constant power to function properly. In winter, furnaces, pumps and other installations that provide heating of the house deserve special attention among this type of equipment. Therefore, in the event of a power failure, it pays to have an emergency power source.\u003cbr\/\u003e\u003cbr\/\u003eHome emergency power\u003cbr\/\u003eKEMOT emergency power systems protect selected equipment from power outages that may result in disruption or interruption of their operation.\u003cbr\/\u003e\u003cbr\/\u003eAre you wondering which UPS to choose for a gas boiler, or maybe you are interested in a UPS for an eco-pea or pellet stove? The KEMOT PROsinus range of devices is perfectly suited as an emergency source for central heating pumps or pumps in fireplace installations, as well as induction motors or, for example, devices for automating installations using heat convectors and all devices extremely sensitive to the slightest changes. in the form of voltage. Their advantage is a clean sinusoidal course of the output voltage (supplying the load), thanks to which the device ensures stable operation, preventing the influence of overheating of inductive loads. Together with the 12V battery, it forms a complete power supply with a guarantee of 230 VAC.\u003cbr\/\u003e\u003cbr\/\u003eHome uninterruptible power supply - application\u003cbr\/\u003eEmergency power supply to furnaces\u003cbr\/\u003eRTV equipment (televisions, tuners, hi-fi, DVD)\u003cbr\/\u003eHome appliances (refrigerators, blenders)\u003cbr\/\u003ePower tools (drills, grinders)\u003cbr\/\u003ePower for chargers (smartphones, tablets, phones, laptops)\u003cbr\/\u003ePumps, compressors (water, heat, air conditioning)\u003cbr\/\u003eOffice equipment (faxes, computers, monitors)\u003cbr\/\u003e\u003cbr\/\u003eSafe emergency power at home\u003cbr\/\u003eKEMOT emergency power supplies have protection against overload, short circuit and too high and too low voltage. Thanks to this, they guarantee safe work in your home.\u003cbr\/\u003e\u003cbr\/\u003eThree operating modes\u003cbr\/\u003eThe emergency power mode with charging function converts the 12V DC voltage supplied from the external battery to 230V AC voltage and charges the external battery. Charger mode charges an external battery. Converter mode converts 12V DC voltage from the battery to 230V AC voltage.\u003cbr\/\u003e\u003cbr\/\u003eConstant phase uninterruptible power supply\u003cbr\/\u003eThe KEMOT emergency power supply works with devices equipped with phase detection, such as some models of gas furnaces. The phase in our device is in a fixed place, regardless of whether it is powered from a mains socket or from a battery.\u003cbr\/\u003e\u003cbr\/\u003eClear LED display\u003cbr\/\u003eKEMOT PROSinus emergency sources are equipped with a clear LED display that shows the current operating status of the device. On the display you can check, among other things: input voltage, output voltage and frequency. In addition, you can quickly check the load level and battery level\u003cbr\/\u003e\u003cbr\/\u003eA battery to power your home is not included.\u003cbr\/\u003e\u003cbr\/\u003eTechnical parameters:\u003cbr\/\u003e\u003cbr\/\u003eRated power: 700 W\u003cbr\/\u003eBattery type: 12 V DC\u003cbr\/\u003eMaximum battery voltage: 15 V DC\u003cbr\/\u003eInput voltage range: 180~275V AC\u003cbr\/\u003eInput frequency: 45 ~ 60 Hz\u003cbr\/\u003eOutput voltage range: 230 V AC +\/-8%\u003cbr\/\u003eOutput frequency: 50 \/60 Hz +\/-0.5 Hz\u003cbr\/\u003eOutput voltage shape: Pure sine wave\u003cbr\/\u003eOutput efficiency \u003e=85% (DC to AC)\u003cbr\/\u003eBattery charging current: Max 10 A\u003cbr\/\u003eSwitching time: \u003c=4 ms\u003cbr\/\u003eProtections: Against overload, short circuit, overload high or too low voltage\u003cbr\/\u003ePermissible operating temperature: 0-40°C\u003cbr\/\u003ePermissible humidity 10 - 90%\u003cbr\/\u003eDimensions: 33.5x32x18 cm\u003cbr\/\u003eWeight: 7.55 kg","brand":"KEMOT","offers":[{"title":"Default Title","offer_id":52553261056338,"sku":"08840230","price":3109.0,"currency_code":"CZK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0954\/9624\/1490\/files\/08840230.png?v=1769241300"},{"product_id":"zdroj-zalozni-kemot-prosinus-500-12v-230v-500va-300w-white","title":"Backup power supply KEMOT PROsinus-500 12V 230V 500VA 300W White","description":"Home emergency power\u003cbr\/\u003eKEMOT emergency power systems protect selected equipment from power outages that may result in disruption or interruption of their operation.\u003cbr\/\u003e\u003cbr\/\u003eAre you wondering which UPS to choose for a gas boiler, or maybe you are interested in a UPS for an eco-pea or pellet stove? The KEMOT PROsinus range of devices is perfectly suited as an emergency source for central heating pumps or pumps in fireplace installations, as well as induction motors or, for example, devices for automating installations using heat convectors and all devices extremely sensitive to the slightest changes. in the form of voltage. Their advantage is a clean sinusoidal course of the output voltage (supplying the load), thanks to which the device ensures stable operation, preventing the influence of overheating of inductive loads. Together with the 12V battery, it forms a complete power supply with a guarantee of 230 VAC.\u003cbr\/\u003e\u003cbr\/\u003eHome uninterruptible power supply - application\u003cbr\/\u003eEmergency power supply to furnaces\u003cbr\/\u003eRTV equipment (televisions, tuners, hi-fi, DVD)\u003cbr\/\u003eHome appliances (refrigerators, blenders)\u003cbr\/\u003ePower tools (drills, grinders)\u003cbr\/\u003ePower for chargers (smartphones, tablets, phones, laptops)\u003cbr\/\u003ePumps, compressors (water, heat, air conditioning)\u003cbr\/\u003eOffice equipment (faxes, computers, monitors)\u003cbr\/\u003e\u003cbr\/\u003eSafe emergency power at home\u003cbr\/\u003eKEMOT emergency power supplies have protection against overload, short circuit and too high and too low voltage. Thanks to this, they guarantee safe work in your home.\u003cbr\/\u003e\u003cbr\/\u003eThree operating modes\u003cbr\/\u003eThe emergency power mode with charging function converts the 12V DC voltage supplied from the external battery to 230V AC voltage and charges the external battery. Charger mode charges an external battery. Converter mode converts 12V DC voltage from the battery to 230V AC voltage.\u003cbr\/\u003e\u003cbr\/\u003eConstant phase uninterruptible power supply\u003cbr\/\u003eThe KEMOT emergency power supply works with devices equipped with phase detection, such as some models of gas furnaces. The phase in our device is in a fixed place, regardless of whether it is powered from a mains socket or from a battery.\u003cbr\/\u003e\u003cbr\/\u003eEmergency power supply for stove with battery\u003cbr\/\u003eIn order to ensure the highest quality of operation of the KEMOT emergency power source, you must choose a suitable battery for it. The optimal battery can be selected using an approximate formula: 100 W load = 10 A consumption from the battery.\u003cbr\/\u003e\u003cbr\/\u003eTechnical parameters:\u003cbr\/\u003e\u003cbr\/\u003eRated power: 300 W\u003cbr\/\u003eBattery type: 12 V DC\u003cbr\/\u003eMaximum battery voltage: 15 V DC\u003cbr\/\u003eInput voltage range: 190 - 260 V AC\u003cbr\/\u003eInput frequency: 45 - 60 Hz\u003cbr\/\u003eOutput voltage range: 230 V AC +\/-5% \/ Converter: 230 VAC +\/-3%\u003cbr\/\u003eOutput frequency: 50\/60 Hz +\/-0.5 Hz\u003cbr\/\u003eOutput voltage shape: Pure sine wave\u003cbr\/\u003eOutput efficiency: \u003e= 85% (DC to AC)\u003cbr\/\u003eBattery charging current: 10 A\u003cbr\/\u003eBattery capacity: 50 -. 200 Ah (recommended: 55 Ah)\u003cbr\/\u003eEstimated charging time: 4-14 hours (depending on battery capacity)\u003cbr\/\u003eSwitching time: =\u003c 4 ms\u003cbr\/\u003eProtection: Against overload, short circuit, too high or too low voltage\u003cbr\/\u003ePermissible operating temperature: 0 - 40 °C\u003cbr\/\u003ePermissible humidity: 10 - 90%\u003cbr\/\u003eDimensions: 14.5 x 18 x 24 cm\u003cbr\/\u003eWeight: 4.3 kg","brand":"KEMOT","offers":[{"title":"Default Title","offer_id":52554536616274,"sku":"08840299","price":1999.0,"currency_code":"CZK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0954\/9624\/1490\/files\/08840299_9babb906-8648-4940-a8a7-7d1d9a706656.png?v=1769259381"},{"product_id":"zdroj-zalozni-kemot-prosinus-2000-12v-230v-2000va-1200w-white","title":"Backup power supply KEMOT PROsinus-2000 12V 230V 2000VA 1200W White","description":"Many homes have devices that make our daily lives easier, but require constant power to function properly. In winter, furnaces, pumps and other installations that provide heating of the house deserve special attention among this type of equipment. Therefore, in the event of a power failure, it pays to have an emergency power source.\u003cbr\/\u003e\u003cbr\/\u003eHome emergency power\u003cbr\/\u003eKEMOT emergency power systems protect selected equipment from power outages that may result in disruption or interruption of their operation.\u003cbr\/\u003e\u003cbr\/\u003eAre you wondering which UPS to choose for a gas boiler, or maybe you are interested in a UPS for an eco-pea or pellet stove? The KEMOT PROsinus range of devices is perfectly suited as an emergency source for central heating pumps or pumps in fireplace installations, as well as induction motors or, for example, devices for automating installations using heat convectors and all devices extremely sensitive to the slightest changes. in the form of voltage. Their advantage is a clean sinusoidal course of the output voltage (supplying the load), thanks to which the device ensures stable operation, preventing the influence of overheating of inductive loads. Together with the 12V battery, it forms a complete power supply with a guarantee of 230 VAC.\u003cbr\/\u003e\u003cbr\/\u003eHome uninterruptible power supply - application\u003cbr\/\u003eEmergency power supply to furnaces\u003cbr\/\u003eRTV equipment (televisions, tuners, hi-fi, DVD)\u003cbr\/\u003eHome appliances (refrigerators, blenders)\u003cbr\/\u003ePower tools (drills, grinders)\u003cbr\/\u003ePower for chargers (smartphones, tablets, phones, laptops)\u003cbr\/\u003ePumps, compressors (water, heat, air conditioning)\u003cbr\/\u003eOffice equipment (faxes, computers, monitors)\u003cbr\/\u003e\u003cbr\/\u003eSafe emergency power at home\u003cbr\/\u003eKEMOT emergency power supplies have protection against overload, short circuit and too high and too low voltage. Thanks to this, they guarantee safe work in your home.\u003cbr\/\u003e\u003cbr\/\u003eThree operating modes\u003cbr\/\u003eThe emergency power mode with charging function converts the 12V DC voltage supplied from the external battery to 230V AC voltage and charges the external battery. Charger mode charges an external battery. Converter mode converts 12V DC voltage from the battery to 230V AC voltage.\u003cbr\/\u003e\u003cbr\/\u003eConstant phase uninterruptible power supply\u003cbr\/\u003eThe KEMOT emergency power supply works with devices equipped with phase detection, such as some models of gas furnaces. The phase in our device is in a fixed place, regardless of whether it is powered from a mains socket or from a battery.\u003cbr\/\u003e\u003cbr\/\u003eClear LED display\u003cbr\/\u003eKEMOT PROSinus emergency sources are equipped with a clear LED display that shows the current operating status of the device. On the display you can check, among other things: input voltage, output voltage and frequency. In addition, you can quickly check the load level and battery level.\u003cbr\/\u003e\u003cbr\/\u003eTechnical parameters:\u003cbr\/\u003e\u003cbr\/\u003eRated power: 1200W\u003cbr\/\u003eBattery type: 12V DC\u003cbr\/\u003eMaximum battery voltage: 15V DC\u003cbr\/\u003eInput voltage range: 190 - 260 V AC\u003cbr\/\u003eInput frequency: 45~60Hz\u003cbr\/\u003eOutput voltage range: 230V AC +\/-5% \/ 230 VAC +\/-3%\u003cbr\/\u003eOutput frequency: 50\/60Hz +\/-0.5Hz\u003cbr\/\u003eOutput voltage shape: pure sine wave\u003cbr\/\u003eOutput efficiency \u003e=85% (DC to AC)\u003cbr\/\u003eBattery charging current: max. 10 A\u003cbr\/\u003eBattery capacity: 100-400 Ah (recommended: 200 Ah)\u003cbr\/\u003eEstimated charging time: 4-14 hours (depending on battery capacity)\u003cbr\/\u003eSwitching time: \u003c=4 ms\u003cbr\/\u003eProtection: against overload, short circuit, too high or too low voltage\u003cbr\/\u003ePermissible temperature operation: 0-40 C\u003cbr\/\u003ePermissible humidity 10 - 90%\u003cbr\/\u003eWeight: 11.3 kg\u003cbr\/\u003eSize: 34x22x23 cm","brand":"KEMOT","offers":[{"title":"Default Title","offer_id":52554735190354,"sku":"08840301","price":4890.0,"currency_code":"CZK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0954\/9624\/1490\/files\/08840301_6846df49-a1e3-4ba6-8a62-2db8bd9a786d.png?v=1774546869"},{"product_id":"zdroj-zalozni-kemot-prosinus-2000-12v-230v-2000va-1200w-black","title":"Backup power supply KEMOT PROsinus-2000 12V 230V 2000VA 1200W Black","description":"Many homes have devices that make our daily lives easier, but require constant power to function properly. In winter, furnaces, pumps and other installations that provide heating of the house deserve special attention among this type of equipment. Therefore, in the event of a power failure, it pays to have an emergency power source.\u003cbr\/\u003e\u003cbr\/\u003eHome emergency power\u003cbr\/\u003eKEMOT emergency power systems protect selected equipment from power outages that may result in disruption or interruption of their operation.\u003cbr\/\u003e\u003cbr\/\u003eAre you wondering which UPS to choose for a gas boiler, or maybe you are interested in a UPS for an eco-pea or pellet stove? The KEMOT PROsinus range of devices is perfectly suited as an emergency source for central heating pumps or pumps in fireplace installations, as well as induction motors or, for example, devices for automating installations using heat convectors and all devices extremely sensitive to the slightest changes. in the form of voltage. Their advantage is a clean sinusoidal course of the output voltage (supplying the load), thanks to which the device ensures stable operation, preventing the influence of overheating of inductive loads. Together with the 12V battery, it forms a complete power supply with a guarantee of 230 VAC.\u003cbr\/\u003e\u003cbr\/\u003eHome uninterruptible power supply - application\u003cbr\/\u003eEmergency power supply to furnaces\u003cbr\/\u003eRTV equipment (televisions, tuners, hi-fi, DVD)\u003cbr\/\u003eHome appliances (refrigerators, blenders)\u003cbr\/\u003ePower tools (drills, grinders)\u003cbr\/\u003ePower for chargers (smartphones, tablets, phones, laptops)\u003cbr\/\u003ePumps, compressors (water, heat, air conditioning)\u003cbr\/\u003eOffice equipment (faxes, computers, monitors)\u003cbr\/\u003e\u003cbr\/\u003eSafe emergency power at home\u003cbr\/\u003eKEMOT emergency power supplies have protection against overload, short circuit and too high and too low voltage. Thanks to this, they guarantee safe work in your home.\u003cbr\/\u003e\u003cbr\/\u003eThree operating modes\u003cbr\/\u003eThe emergency power mode with charging function converts the 12V DC voltage supplied from the external battery to 230V AC voltage and charges the external battery. Charger mode charges an external battery. Converter mode converts 12V DC voltage from the battery to 230V AC voltage.\u003cbr\/\u003e\u003cbr\/\u003eConstant phase uninterruptible power supply\u003cbr\/\u003eThe KEMOT emergency power supply works with devices equipped with phase detection, such as some models of gas furnaces. The phase in our device is in a fixed place, regardless of whether it is powered from a mains socket or from a battery.\u003cbr\/\u003e\u003cbr\/\u003eClear LED display\u003cbr\/\u003eKEMOT PROSinus emergency sources are equipped with a clear LED display that shows the current operating status of the device. On the display you can check, among other things: input voltage, output voltage and frequency. In addition, you can quickly check the load level and battery level.\u003cbr\/\u003e\u003cbr\/\u003eTechnical parameters:\u003cbr\/\u003e\u003cbr\/\u003eRated power: 1200 W\u003cbr\/\u003eBattery type: 12 V DC\u003cbr\/\u003eMaximum battery voltage: 15 V DC\u003cbr\/\u003eInput voltage range: 190 - 260 V AC\u003cbr\/\u003eFrequency input: 45~60Hz\u003cbr\/\u003eOutput voltage range: 230 V AC +\/-5% \/ 230 VAC +\/-3%\u003cbr\/\u003eOutput frequency: 50\/60 Hz +\/-0.5 Hz\u003cbr\/\u003eOutput voltage shape: pure sine wave\u003cbr\/\u003eOutput efficiency \u003e=85% (DC to AC)\u003cbr\/\u003eBattery charging current: max. 10 A\u003cbr\/\u003eBattery capacity: 100-400 Ah (recommended: 200 Ah)\u003cbr\/\u003eEstimated charging time: 4-14 hours (depending on battery capacity)\u003cbr\/\u003eSwitching time: \u003c=4 ms\u003cbr\/\u003eProtection: against overload, short circuit, too high or too low voltage\u003cbr\/\u003ePermissible operating temperature: 0-40°C\u003cbr\/\u003ePermissible humidity 10 - 90%\u003cbr\/\u003eWeight: 11.3 kg\u003cbr\/\u003eSize: 34x22x23 cm","brand":"KEMOT","offers":[{"title":"Default Title","offer_id":52556546146642,"sku":"08840302","price":4890.0,"currency_code":"CZK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0954\/9624\/1490\/files\/08840302_8e77ae92-2a61-4983-9780-3cee4d452d10.png?v=1776414929"},{"product_id":"zdroj-zalozni-kemot-prosinus-2200-12v-230v-2200va-1600w-black-nastenny","title":"Backup power supply KEMOT PROsinus-2200 12V 230V 2200VA 1600W Black wall-mounted","description":"Many homes have devices that make our daily lives easier, but require constant power to function properly. In winter, furnaces, pumps and other installations that provide heating of the house deserve special attention among this type of equipment. Therefore, in the event of a power failure, it pays to have an emergency power source.\u003cbr\/\u003e\u003cbr\/\u003eHome emergency power\u003cbr\/\u003eKEMOT emergency power systems protect selected equipment from power outages that may result in disruption or interruption of their operation.\u003cbr\/\u003e\u003cbr\/\u003eAre you wondering which UPS to choose for a gas boiler, or maybe you are interested in a UPS for an eco-pea or pellet stove? The KEMOT PROsinus range of devices is perfectly suited as an emergency source for central heating pumps or pumps in fireplace installations, as well as induction motors or, for example, devices for automating installations using heat convectors and all devices extremely sensitive to the slightest changes. in the form of voltage. Their advantage is a clean sinusoidal course of the output voltage (supplying the load), thanks to which the device ensures stable operation, preventing the influence of overheating of inductive loads. Together with the 12V battery, it forms a complete power supply with a guarantee of 230 VAC.\u003cbr\/\u003e\u003cbr\/\u003eHome uninterruptible power supply - application\u003cbr\/\u003eEmergency power supply to furnaces\u003cbr\/\u003eRTV equipment (televisions, tuners, hi-fi, DVD)\u003cbr\/\u003eHome appliances (refrigerators, blenders)\u003cbr\/\u003ePower tools (drills, grinders)\u003cbr\/\u003ePower for chargers (smartphones, tablets, phones, laptops)\u003cbr\/\u003ePumps, compressors (water, heat, air conditioning)\u003cbr\/\u003eOffice equipment (faxes, computers, monitors)\u003cbr\/\u003e\u003cbr\/\u003eSafe emergency power at home\u003cbr\/\u003eKEMOT emergency power supplies have protection against overload, short circuit and too high and too low voltage. Thanks to this, they guarantee safe work in your home.\u003cbr\/\u003e\u003cbr\/\u003eThree operating modes\u003cbr\/\u003eThe emergency power mode with charging function converts the 12V DC voltage supplied from the external battery to 230V AC voltage and charges the external battery. Charger mode charges an external battery. Converter mode converts 12V DC voltage from the battery to 230V AC voltage.\u003cbr\/\u003e\u003cbr\/\u003eConstant phase uninterruptible power supply\u003cbr\/\u003eThe KEMOT emergency power supply works with devices equipped with phase detection, such as some models of gas furnaces. The phase in our device is in a fixed place, regardless of whether it is powered from a mains socket or from a battery.\u003cbr\/\u003e\u003cbr\/\u003eClear LED display\u003cbr\/\u003eKEMOT PROSinus emergency sources are equipped with a clear LED display that shows the current operating status of the device. On the display you can check, among other things: input voltage, output voltage and frequency. In addition, you can quickly check the load level and battery level.\u003cbr\/\u003e\u003cbr\/\u003eTechnical parameters:\u003cbr\/\u003e\u003cbr\/\u003eRated power: 1600 W\u003cbr\/\u003eBattery type: 12 V DC\u003cbr\/\u003eMaximum battery voltage: 15 V DC\u003cbr\/\u003eInput voltage range: 190 - 260 V AC\u003cbr\/\u003eInput frequency: 45 ~ 60 Hz\u003cbr\/\u003eOutput voltage range: 230 V AC +\/-5% \/ Converter: 230 VAC +\/-3%\u003cbr\/\u003eOutput frequency: 50\/60 Hz +\/-0.5 Hz\u003cbr\/\u003eOutput voltage shape: Pure sine wave\u003cbr\/\u003eOutput efficiency: \u003e=85% (DC to AC)\u003cbr\/\u003eAccumulator charging current: 20 A\u003cbr\/\u003eBattery capacity: 100 -. 400 Ah (recommended: 200 Ah)\u003cbr\/\u003eEstimated charging time: 4-14 hours (depending on battery capacity)\u003cbr\/\u003eSwitching time: \u003c=4 ms\u003cbr\/\u003eProtection: against overload, short circuit, too high or too low voltage\u003cbr\/\u003ePermissible operating temperature: 0-40 °C\u003cbr\/\u003ePermissible humidity 10 - 90%\u003cbr\/\u003eDimensions: 50x27x21 cm\u003cbr\/\u003eWeight: 14.95 kg","brand":"KEMOT","offers":[{"title":"Default Title","offer_id":52556546376018,"sku":"08840303","price":5799.0,"currency_code":"CZK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0954\/9624\/1490\/files\/08840303_c12d7cb5-328a-4a48-9f04-91617bfc84df.png?v=1776147336"},{"product_id":"zdroj-zalozni-kemot-prosinus-1500-24-24v-230v-1500va-1050w-white","title":"Backup power supply KEMOT PROsinus-1500\/24 ??24V 230V 1500VA 1050W White","description":"Many homes have devices that make our daily lives easier, but require constant power to function properly. In winter, furnaces, pumps and other installations that provide heating of the house deserve special attention among this type of equipment. Therefore, in the event of a power failure, it pays to have an emergency power source.\u003cbr\/\u003e\u003cbr\/\u003eHome emergency power\u003cbr\/\u003eKEMOT emergency power systems protect selected equipment from power outages that may result in disruption or interruption of their operation.\u003cbr\/\u003e\u003cbr\/\u003eAre you wondering which UPS to choose for a gas boiler, or maybe you are interested in a UPS for an eco-pea or pellet stove? The KEMOT PROsinus range of devices is perfectly suited as an emergency source for central heating pumps or pumps in fireplace installations, as well as induction motors or, for example, devices for automating installations using heat convectors and all devices extremely sensitive to the slightest changes. in the form of voltage. Their advantage is a clean sinusoidal course of the output voltage (supplying the load), thanks to which the device ensures stable operation, preventing the influence of overheating of inductive loads. Together with the 24V battery, it forms a complete 230 VAC guaranteed power supply.\u003cbr\/\u003e\u003cbr\/\u003eHome uninterruptible power supply - application\u003cbr\/\u003eEmergency power supply to furnaces\u003cbr\/\u003eRTV equipment (televisions, tuners, hi-fi, DVD)\u003cbr\/\u003eHome appliances (refrigerators, blenders)\u003cbr\/\u003ePower tools (drills, grinders)\u003cbr\/\u003ePower for chargers (smartphones, tablets, phones, laptops)\u003cbr\/\u003ePumps, compressors (water, heat, air conditioning)\u003cbr\/\u003eOffice equipment (faxes, computers, monitors)\u003cbr\/\u003e\u003cbr\/\u003eSafe emergency power at home\u003cbr\/\u003eKEMOT emergency power supplies have protection against overload, short circuit and too high and too low voltage. Thanks to this, they guarantee safe work in your home.\u003cbr\/\u003e\u003cbr\/\u003eThree operating modes\u003cbr\/\u003eThe emergency power mode with charging function converts the 24V DC voltage supplied from the external battery to 230V AC voltage and charges the external battery. Charger mode charges an external battery. Converter mode converts 24V DC voltage from the battery to 230V AC voltage.\u003cbr\/\u003e\u003cbr\/\u003eConstant phase uninterruptible power supply\u003cbr\/\u003eThe KEMOT emergency power supply works with devices equipped with phase detection, such as some models of gas furnaces. The phase in our device is in a fixed place, regardless of whether it is powered from a mains socket or from a battery.\u003cbr\/\u003e\u003cbr\/\u003eClear LED display\u003cbr\/\u003eKEMOT PROSinus emergency sources are equipped with a clear LED display that shows the current operating status of the device. On the display you can check, among other things: input voltage, output voltage and frequency. In addition, you can quickly check the load level and battery level.\u003cbr\/\u003e\u003cbr\/\u003eTechnical parameters:\u003cbr\/\u003e\u003cbr\/\u003eRated power: 1050 W\u003cbr\/\u003eBattery type: 24 V DC\u003cbr\/\u003eMaximum battery voltage: 30 V DC\u003cbr\/\u003eInput voltage range: 190 - 260 V AC\u003cbr\/\u003eInput frequency: 45 - 60 Hz\u003cbr\/\u003eOutput voltage range: 230 V AC +\/-5% \/ Converter: 230 VAC +\/-3%\u003cbr\/\u003eOutput frequency: 50\/60 Hz +\/-0.5 Hz\u003cbr\/\u003eOutput voltage shape: Pure sine wave\u003cbr\/\u003eOutput efficiency: \u003e= 85% (DC to AC)\u003cbr\/\u003eBattery charging current: 10 A \/15 A\u003cbr\/\u003eBattery capacity: 50 -300 Ah (recommended: 100 Ah)\u003cbr\/\u003eEstimated charging time: 4-14 hours (depending on battery capacity)\u003cbr\/\u003eSwitching time: =\u003c 4 ms\u003cbr\/\u003eProtection: Against overload, short circuit, too high or too low voltage\u003cbr\/\u003ePermissible operating temperature: 0 - 40°C\u003cbr\/\u003ePermissible air humidity: 10 - 90% a","brand":"KEMOT","offers":[{"title":"Default Title","offer_id":52556546539858,"sku":"08840304","price":2899.0,"currency_code":"CZK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0954\/9624\/1490\/files\/08840304_5f76afe9-7cf7-4dca-b24f-87485c383acc.png?v=1769277516"},{"product_id":"zdroj-zalozni-volt-sinus-pro-1000-w-12v-230v-1000va-700w-black","title":"Backup power supply VOLT Sinus Pro 1000 W 12V 230V 1000VA 700W Black","description":"Computer emergency power supply sinusPRO 1000W 12V is a device used to ensure uninterrupted power supply for computers, servers and computer systems. In the event of a power failure from the 230VAC network or photovoltaics, the device switches to battery operation mode, which allows continuous system operation and protects against irreversible data loss.\u003cbr\/\u003e\u003cbr\/\u003e\"OFF-GRID\" power supply with direct voltage (do not connect the inverter output to the electrical installation)\u003cbr\/\u003eAutomatic mains voltage regulator AVR\u003cbr\/\u003eMains charger for charging the connected battery\u003cbr\/\u003ePure SINUS inverter based on a toroidal transformer\u003cbr\/\u003eThe built-in toroidal transformer compensates for the different reactive power of the receivers (capacitive, inductive and resistive loads can be combined) and reacts very flexibly to, among other things, overloads. starting pumps, compressors, motors\u003cbr\/\u003eThe converter can operate in UPS mode, which ensures practically continuous and trouble-free operation of e.g. blowers, feeders, pumps, central heating installations, automation, etc.\u003cbr\/\u003eLCD display with the most important parameters\u003cbr\/\u003eRobust and compact housing\u003cbr\/\u003e\u003cbr\/\u003eWhat devices does the SinusPRO 1000W 12V power?\u003cbr\/\u003eCentral heating pumps and heaters\u003cbr\/\u003eMotors for automatic gates and elevators\u003cbr\/\u003eRefrigerators, freezers\u003cbr\/\u003eAir conditioning\u003cbr\/\u003eRTV equipment such as televisions, consoles, speakers, etc.\u003cbr\/\u003eLED lighting\u003cbr\/\u003eHome automation and smart home devices\u003cbr\/\u003ePower tools such as drills, grinders, angle grinders, etc.\u003cbr\/\u003eHome appliances such as washing machines, microwaves, etc.\u003cbr\/\u003e\u003cbr\/\u003eWhy is it worth using the SinusPRO 1000W 12V power supply?\u003cbr\/\u003eDesign based on an efficient toroidal transformer\u003cbr\/\u003eWide input frequency range, automatic detection of 50\/60Hz\u003cbr\/\u003eComplete range of protections and alarms: overload, short circuit, overvoltage and undervoltage protection, temperature\u003cbr\/\u003eLCD display, informing about the current operating status of the device, among other things. input and output voltage, battery voltage and charging\u003cbr\/\u003e\u003cbr\/\u003eTechnical parameters:\u003cbr\/\u003e\u003cbr\/\u003eTotal power (instantaneous): 1000VA\u003cbr\/\u003eConstant power: 700W\u003cbr\/\u003eBattery voltage: 12V DC\u003cbr\/\u003eInput voltage: 170-270VAC\u003cbr\/\u003eOutput voltage: 230 VAC ± 1% in battery mode; 230 VAC ± 8% in mains mode with AVR\u003cbr\/\u003eCharging current: 20A\u003cbr\/\u003eNo load current: over 1A\u003cbr\/\u003eVoltage waveform: pure sine wave\u003cbr\/\u003eEfficiency: 92% (+-5% depending on load)\u003cbr\/\u003eProtection: overload, temperature, overvoltage and undervoltage, battery discharge, short circuit, overcharge\u003cbr\/\u003eDimensions: 311x232x140mm\u003cbr\/\u003eWeight: 6.8 kg","brand":"VOLT","offers":[{"title":"Default Title","offer_id":52556749341010,"sku":"06437455","price":3330.0,"currency_code":"CZK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0954\/9624\/1490\/files\/06437455.png?v=1769279330"},{"product_id":"zdroj-zalozni-volt-sinus-pro-2000-w-24-230v-2000va-1400w","title":"Backup power supply VOLT Sinus Pro 2000 W 24\/230V 2000VA 1400W","description":"The backup power supply VOLT Sinus Pro 2000 W 24\/230V 2000VA 1400W is a device for continuous power supply such as central heating installations (central heating boilers, pumps, regulators, feeders, etc.), computers, servers, computer assemblies, automatic gates, automation equipment, power tools, etc. In the event of a power failure, the device switches to battery mode, which allows for further continuous operation of the system and protects against damage to the installation, irreversible data loss, etc.\u003cbr\/\u003e\u003cbr\/\u003eWhat is it used for?\u003cbr\/\u003e\u003cbr\/\u003eThis backup power supply produces a \"pure sine wave\" output voltage, the same as in the mains. As a result, it can power induction equipment (e.g. power tools, air compressors, air conditioners, refrigerators, freezers, etc.).\u003cbr\/\u003e\u003cbr\/\u003eProperties:\u003cbr\/\u003e\u003cbr\/\u003e- Pure sine wave DC\/AC converters\u003cbr\/\u003e- UPS type emergency switch\u003cbr\/\u003e- Mains battery charger (rectifier)\u003cbr\/\u003e- Mains voltage stabilizer AVR\u003cbr\/\u003e- The color display allows you to monitor the most important operating parameters of the system\u003cbr\/\u003e- This series of power supplies is line interactive and can reverse the polarity of the output voltage when switched to battery power\u003cbr\/\u003e- Total power (instantaneous): 2000VA\u003cbr\/\u003e- Constant power: 1400W\u003cbr\/\u003e- Input voltage: 170-270VAC\u003cbr\/\u003e- Output voltage: 230VAC±1% in battery mode: 216-245VAC in mains mode with AVR\u003cbr\/\u003e- Battery voltage: 24VDC\u003cbr\/\u003e- Charging current: 20A\u003cbr\/\u003e- Efficiency: over 92%\u003cbr\/\u003e- Frequency: 50\/60Hz+-1Hz\u003cbr\/\u003e- Voltage waveform: Sine waveform\u003cbr\/\u003e- Full protection: overload, overcharge and discharge\u003cbr\/\u003e- Working temperature: 0-40°C\u003cbr\/\u003e- Dimensions: 311x232x140mm\u003cbr\/\u003e- Weight: 9.5 kg","brand":"VOLT","offers":[{"title":"Default Title","offer_id":52556749504850,"sku":"06437456","price":4599.0,"currency_code":"CZK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0954\/9624\/1490\/files\/06437456_83a32e0f-a7f3-46e3-adfc-9479dab40318.png?v=1769279330"},{"product_id":"zdroj-zalozni-rebel-power-800-12v-230v-800va-500w-black","title":"Power supply REBEL POWER-800 12V 230V 800VA 500W Black","description":"If you have devices in your home that require continuous power to function properly, you should also invest in an uninterruptible power supply. This device is especially useful in winter, as it will maintain the stable operation of the furnace, pump or other installations that guarantee the heating of the house in the event of a power failure.\u003cbr\/\u003e\u003cbr\/\u003eHome emergency power\u003cbr\/\u003eThe role of Rebel emergency power systems is to protect equipment from power failure and, as a result, disruption or interruption of their operation.\u003cbr\/\u003e\u003cbr\/\u003eAre you wondering which UPS to choose for a gas boiler, or maybe you are interested in a UPS for an eco-pea or pellet stove? Rebel's POWER range is ideal as an emergency power supply for central heating pumps or pumps in fireplace installations, as well as induction motors, or for example installation automation equipment using heat convectors and any equipment that is extremely sensitive to the slightest changes in voltage shape. Their advantage is a clean sinusoidal course of the output voltage (supplying the load), thanks to which the device ensures stable operation, preventing the influence of overheating of inductive loads. Together with the 12V battery, it forms a complete power supply with a guarantee of 230 VAC.\u003cbr\/\u003e\u003cbr\/\u003eHome uninterruptible power supply - application\u003cbr\/\u003eEmergency power supply to furnaces\u003cbr\/\u003eRTV equipment (televisions, tuners, hi-fi, DVD)\u003cbr\/\u003eHome appliances (refrigerators, blenders)\u003cbr\/\u003ePower tools (drills, grinders)\u003cbr\/\u003ePower for chargers (smartphones, tablets, phones, laptops)\u003cbr\/\u003ePumps, compressors (water, heat, air conditioning)\u003cbr\/\u003eOffice equipment (faxes, computers, monitors)\u003cbr\/\u003e\u003cbr\/\u003eSafety guaranteed\u003cbr\/\u003eRebel backup power supplies are equipped with a number of protections, such as against overload, short circuit, and too high and too low voltage. The solutions used are the basis of security and your peace of mind!\u003cbr\/\u003e\u003cbr\/\u003eThree operating modes\u003cbr\/\u003eThe emergency power mode with charging function converts the 12V DC voltage supplied from the external battery to 230V AC voltage and charges the external battery. Charger mode charges an external battery. Converter mode converts 12V DC voltage from the battery to 230V AC voltage.\u003cbr\/\u003e\u003cbr\/\u003eConstant phase uninterruptible power supply\u003cbr\/\u003eThe Rebel backup power supply works with appliances equipped with phase detection, such as some models of gas furnaces. The phase in our device is in a fixed place, regardless of whether it is powered from a mains socket or from a battery.\u003cbr\/\u003e\u003cbr\/\u003eA battery to power your home is not included.\u003cbr\/\u003e\u003cbr\/\u003eLED display\u003cbr\/\u003eConvenient use of the uninterruptible Rebel source is guaranteed by a clear LED display. Thanks to it, you can easily read the current operating status of the device, check, among other things: input voltage, output voltage and frequency. In addition, you can quickly check the load level and battery level.\u003cbr\/\u003e\u003cbr\/\u003eTechnical parameters:\u003cbr\/\u003e\u003cbr\/\u003eRated power: 500 W\u003cbr\/\u003eBattery type: 12 V DC\u003cbr\/\u003eMaximum battery voltage: 15 V DC\u003cbr\/\u003eInput voltage range: 190 - 260 V AC\u003cbr\/\u003eInput frequency: 45 - 60 Hz\u003cbr\/\u003eOutput voltage range: 230 V AC +\/-5% \/ Converter: 230 VAC +\/-3%\u003cbr\/\u003eOutput frequency: 50\/60 Hz +\/-0.5 Hz\u003cbr\/\u003eOutput voltage shape: Pure sine wave\u003cbr\/\u003eOutput efficiency: \u003e= 85% (DC to AC)\u003cbr\/\u003eBattery charging current: 10 A\u003cbr\/\u003eBattery capacity: 50 -. 200 Ah (recommended: 55 Ah)\u003cbr\/\u003eEstimated charging time: 4-14 hours (depending on battery capacity)\u003cbr\/\u003eSwitching time: =\u003c 4 ms\u003cbr\/\u003eProtection: Against overload, short circuit, too high or too low voltage\u003cbr\/\u003ePermissible operating temperature: 0 - 40 °C\u003cbr\/\u003ePermissible humidity: 10 - 90%\u003cbr\/\u003eDimensions: 235 x 143 x 178 mm\u003cbr\/\u003eWeight: 4.3 kg","brand":"REBEL","offers":[{"title":"Default Title","offer_id":52557103661394,"sku":"08840358","price":2299.0,"currency_code":"CZK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0954\/9624\/1490\/files\/08840358_567b9787-f47d-4d00-b559-f253fed2caaa.png?v=1774548817"},{"product_id":"zdroj-zalozni-rebel-power-1000-12v-230v-1000va-700w-black","title":"Power supply REBEL POWER-1000 12V 230V 1000VA 700W Black","description":"If you have devices in your home that require continuous power to function properly, you should also invest in an uninterruptible power supply. This device is especially useful in winter, as it will maintain the stable operation of the furnace, pump or other installations that guarantee the heating of the house in the event of a power failure.\u003cbr\/\u003e\u003cbr\/\u003eHome emergency power\u003cbr\/\u003eThe role of Rebel emergency power systems is to protect equipment from power failure and, as a result, disruption or interruption of their operation.\u003cbr\/\u003e\u003cbr\/\u003eAre you wondering which UPS to choose for a gas boiler, or maybe you are interested in a UPS for an eco-pea or pellet stove? Rebel's POWER range is ideal as an emergency power supply for central heating pumps or pumps in fireplace installations, as well as induction motors, or for example installation automation equipment using heat convectors and any equipment that is extremely sensitive to the slightest changes in voltage shape. Their advantage is a clean sinusoidal course of the output voltage (supplying the load), thanks to which the device ensures stable operation, preventing the influence of overheating of inductive loads. Together with the 12V battery, it forms a complete power supply with a guarantee of 230 VAC.\u003cbr\/\u003e\u003cbr\/\u003eSafety guaranteed\u003cbr\/\u003eRebel backup power supplies are equipped with a number of protections, such as against overload, short circuit, and too high and too low voltage. The solutions used are the basis of security and your peace of mind!\u003cbr\/\u003e\u003cbr\/\u003eThree operating modes\u003cbr\/\u003eThe emergency power mode with charging function converts the 12V DC voltage supplied from the external battery to 230V AC voltage and charges the external battery. Charger mode charges an external battery. Converter mode converts 12V DC voltage from the battery to 230V AC voltage.\u003cbr\/\u003e\u003cbr\/\u003e\u003cbr\/\u003eConstant phase uninterruptible power supply\u003cbr\/\u003eThe Rebel backup power supply works with appliances equipped with phase detection, such as some models of gas furnaces. The phase in our device is in a fixed place, regardless of whether it is powered from a mains socket or from a battery.\u003cbr\/\u003e\u003cbr\/\u003eA battery to power your home is not included.\u003cbr\/\u003e\u003cbr\/\u003eLED display\u003cbr\/\u003eConvenient use of the uninterruptible Rebel source is guaranteed by a clear LED display. Thanks to it, you can easily read the current operating status of the device, check, among other things: input voltage, output voltage and frequency. In addition, you can quickly check the load level and battery level.\u003cbr\/\u003e\u003cbr\/\u003eTechnical parameters:\u003cbr\/\u003e\u003cbr\/\u003eRated power: 700 W\u003cbr\/\u003eBattery type: 12 V DC\u003cbr\/\u003eMaximum battery voltage: 15 V DC\u003cbr\/\u003eInput voltage range: 190 - 260 V AC\u003cbr\/\u003eInput frequency: 45 - 60 Hz\u003cbr\/\u003eOutput voltage range: 230 V AC +\/-5% \/ Converter: 230 VAC +\/-3%\u003cbr\/\u003eOutput frequency: 50\/60 Hz +\/-0.5 Hz\u003cbr\/\u003eOutput voltage shape: Pure sine wave\u003cbr\/\u003eOutput efficiency: \u003e= 85% (DC to AC)\u003cbr\/\u003eBattery charging current: 10 A\u003cbr\/\u003eBattery capacity: 50 -. 200 Ah (recommended: 55 Ah)\u003cbr\/\u003eEstimated charging time: 4-14 hours (depending on battery capacity)\u003cbr\/\u003eSwitching time: =\u003c 4 ms\u003cbr\/\u003eProtection: Against overload, short circuit, too high or too low voltage\u003cbr\/\u003ePermissible operating temperature: 0 - 40 °C\u003cbr\/\u003ePermissible humidity: 10 - 90%\u003cbr\/\u003eDimensions: 336 x 143 x 178 mm\u003cbr\/\u003eWeight: 4.3 kg","brand":"REBEL","offers":[{"title":"Default Title","offer_id":52557103726930,"sku":"08840359","price":2680.0,"currency_code":"CZK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0954\/9624\/1490\/files\/08840359_1f231a9f-63f5-499b-ae17-34ab95ce63a6.png?v=1769282922"},{"product_id":"zdroj-zalozni-rebel-power-800-12v-230v-800va-500w-black-nastenny","title":"Power supply REBEL POWER-800 12V 230V 800VA 500W Black wall mounted","description":"If you have devices in your home that require continuous power to function properly, you should also invest in an uninterruptible power supply. This device is especially useful in winter, as it will maintain the stable operation of the furnace, pump or other installations that guarantee the heating of the house in the event of a power failure.\u003cbr\/\u003e\u003cbr\/\u003eHome emergency power\u003cbr\/\u003eThe role of Rebel emergency power systems is to protect equipment from power failure and, as a result, disruption or interruption of their operation.\u003cbr\/\u003e\u003cbr\/\u003eAre you wondering which UPS to choose for a gas boiler, or maybe you are interested in a UPS for an eco-pea or pellet stove? Rebel's POWER range is ideal as an emergency power supply for central heating pumps or pumps in fireplace installations, as well as induction motors, or for example installation automation equipment using heat convectors and any equipment that is extremely sensitive to the slightest changes in voltage shape. Their advantage is a clean sinusoidal course of the output voltage (supplying the load), thanks to which the device ensures stable operation, preventing the influence of overheating of inductive loads. Together with the 12V battery, it forms a complete power supply with a guarantee of 230 VAC.\u003cbr\/\u003e\u003cbr\/\u003eHome uninterruptible power supply - application\u003cbr\/\u003e• Emergency power supply for furnaces• Consumer electronics (TV, tuners, hi-fi, DVD)• Household appliances (refrigerators, blenders)• Power tools (drills, grinders)• Power supply for chargers (smartphones, tablets, phones, laptops) • Pumps, compressors (water, heat, air conditioning)• Office equipment (faxes, computers, monitors)\u003cbr\/\u003e\u003cbr\/\u003eSafety guaranteed\u003cbr\/\u003eRebel backup power supplies are equipped with a number of protections, such as against overload, short circuit, and too high and too low voltage. The solutions used are the basis of security and your peace of mind!\u003cbr\/\u003e\u003cbr\/\u003eThree operating modes\u003cbr\/\u003eThe emergency power mode with charging function converts the 12V DC voltage supplied from the external battery to 230V AC voltage and charges the external battery. Charger mode charges an external battery. Converter mode converts 12V DC voltage from the battery to 230V AC voltage.\u003cbr\/\u003e\u003cbr\/\u003eConstant phase uninterruptible power supply\u003cbr\/\u003eThe Rebel backup power supply works with appliances equipped with phase detection, such as some models of gas furnaces. The phase in our device is in a fixed place, regardless of whether it is powered from a mains socket or from a battery.\u003cbr\/\u003e\u003cbr\/\u003eA battery to power your home is not included.\u003cbr\/\u003e\u003cbr\/\u003eLED display\u003cbr\/\u003eConvenient use of the uninterruptible Rebel source is guaranteed by a clear LED display. Thanks to it, you can easily read the current operating status of the device, check, among other things: input voltage, output voltage and frequency. In addition, you can quickly check the load level and battery level.\u003cbr\/\u003e\u003cbr\/\u003eTechnical parameters:\u003cbr\/\u003e\u003cbr\/\u003eRated power: 500 W\u003cbr\/\u003eBattery type: 12 V DC\u003cbr\/\u003eMaximum battery voltage: 15 V DC\u003cbr\/\u003eInput voltage range: 180~275V AC\u003cbr\/\u003eInput frequency: 45 ~ 60 Hz\u003cbr\/\u003eOutput voltage range: 230 V AC +\/-8%\u003cbr\/\u003eOutput frequency: 50 \/60 Hz +\/-0.5 Hz\u003cbr\/\u003eOutput voltage shape: Pure sine wave\u003cbr\/\u003eOutput efficiency \u003e=85% (DC to AC)\u003cbr\/\u003eBattery charging current: Max 10 A\u003cbr\/\u003eSwitching time: \u003c=4 ms\u003cbr\/\u003eProtections: Against overload, short circuit, overload high or too low voltage\u003cbr\/\u003ePermissible operating temperature: 0-40°C\u003cbr\/\u003ePermissible humidity 10 - 90%\u003cbr\/\u003eDimensions: 215 x 265 x 100 mm\u003cbr\/\u003eWeight: 4.7 kg","brand":"REBEL","offers":[{"title":"Default Title","offer_id":52557103858002,"sku":"08840361","price":2399.0,"currency_code":"CZK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0954\/9624\/1490\/files\/08840361_6e162710-ede7-4f34-a88b-3de6f5bc1ae3.png?v=1776414916"},{"product_id":"zdroj-zalozni-rebel-power-1000-12v-230v-1000va-700w-black-nastenny","title":"Power supply REBEL POWER-1000 12V 230V 1000VA 700W Black wall mounted","description":"If you have devices in your home that require continuous power to function properly, you should also invest in an uninterruptible power supply. This device is especially useful in winter, as it will maintain the stable operation of the furnace, pump or other installations that guarantee the heating of the house in the event of a power failure.\u003cbr\/\u003e\u003cbr\/\u003eHome emergency power\u003cbr\/\u003eThe role of Rebel emergency power systems is to protect equipment from power failure and, as a result, disruption or interruption of their operation.\u003cbr\/\u003eAre you wondering which UPS to choose for a gas boiler, or maybe you are interested in a UPS for an eco-pea or pellet stove? Rebel's POWER range is ideal as an emergency power supply for central heating pumps or pumps in fireplace installations, as well as induction motors, or for example installation automation equipment using heat convectors and any equipment that is extremely sensitive to the slightest changes in voltage shape. Their advantage is a clean sinusoidal course of the output voltage (supplying the load), thanks to which the device ensures stable operation, preventing the influence of overheating of inductive loads. Together with the 12V battery, it forms a complete power supply with a guarantee of 230 VAC.\u003cbr\/\u003e\u003cbr\/\u003eHome uninterruptible power supply - application\u003cbr\/\u003e• Emergency power supply for furnaces• Consumer electronics (TV, tuners, hi-fi, DVD)• Household appliances (refrigerators, blenders)• Power tools (drills, grinders)• Power supply for chargers (smartphones, tablets, phones, laptops) • Pumps, compressors (water, heat, air conditioning)• Office equipment (faxes, computers, monitors)\u003cbr\/\u003e\u003cbr\/\u003eSafety guaranteed\u003cbr\/\u003eRebel backup power supplies are equipped with a number of protections, such as against overload, short circuit, and too high and too low voltage. The solutions used are the basis of security and your peace of mind!\u003cbr\/\u003e\u003cbr\/\u003eThree operating modes\u003cbr\/\u003eThe emergency power mode with charging function converts the 12V DC voltage supplied from the external battery to 230V AC voltage and charges the external battery. Charger mode charges an external battery. Converter mode converts 12V DC voltage from the battery to 230V AC voltage.\u003cbr\/\u003e\u003cbr\/\u003eConstant phase uninterruptible power supply\u003cbr\/\u003eThe Rebel backup power supply works with appliances equipped with phase detection, such as some models of gas furnaces. The phase in our device is in a fixed place, regardless of whether it is powered from a mains socket or from a battery.\u003cbr\/\u003e\u003cbr\/\u003eLED display\u003cbr\/\u003eConvenient use of the uninterruptible Rebel source is guaranteed by a clear LED display. Thanks to it, you can easily read the current operating status of the device, check, among other things: input voltage, output voltage and frequency. In addition, you can quickly check the load level and battery level.\u003cbr\/\u003e\u003cbr\/\u003eTechnical parameters:\u003cbr\/\u003e\u003cbr\/\u003eRated power: 700 W\u003cbr\/\u003eBattery type: 12 V DC\u003cbr\/\u003eMaximum battery voltage: 15 V DC\u003cbr\/\u003eInput voltage range: 180~275V AC\u003cbr\/\u003eInput frequency: 45 ~ 60 Hz\u003cbr\/\u003eOutput voltage range: 230 V AC +\/-8%\u003cbr\/\u003eOutput frequency: 50 \/60 Hz +\/-0.5 Hz\u003cbr\/\u003eOutput voltage shape: Pure sine wave\u003cbr\/\u003eOutput efficiency \u003e=85% (DC to AC)\u003cbr\/\u003eBattery charging current: Max 10 A\u003cbr\/\u003eSwitching time: \u003c=4 ms\u003cbr\/\u003eProtections: Against overload, short circuit, overload high or too low voltage\u003cbr\/\u003ePermissible operating temperature: 0-40°C\u003cbr\/\u003ePermissible humidity 10 - 90%\u003cbr\/\u003eDimensions: 240 x 325 x 138 mm\u003cbr\/\u003eWeight: 4.7 kg","brand":"REBEL","offers":[{"title":"Default Title","offer_id":52557103956306,"sku":"08840362","price":2790.0,"currency_code":"CZK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0954\/9624\/1490\/files\/08840362_9763f30c-c2b9-4ce2-9717-6678c4a606a3.png?v=1769282924"},{"product_id":"zdroj-zalozni-geti-gep500-sinus-500w-baterie-70ah","title":"Backup power GETI GEP500 sinus 500W + battery 70Ah","description":"The GETI emergency power supply system (EPS - Emergency Power Supply) is a device that provides a source of alternating voltage in the event of a power failure. You can use the emergency power supply as a backup source for various pumps, automatic boilers, feeders, emergency lighting, camera systems and more. In normal mode, the connected device is powered directly from the network, and in the event of a failure, the emergency power system automatically switches to inverter mode. The connected device is then powered by the connected battery. If the power supply is not restored, the system EPS may be switched off at the moment when the voltage of the connected battery drops to a value of around 10.2V ± 0.3V. This is to protect the battery from deep discharge and subsequent damage. The EPS is equipped with a clear color display, a pure sine voltage converter based on a toroidal transformer and a fast 32-bit processor.\u003cbr\/\u003e\u003cbr\/\u003eWarning: the contacts of the connected battery must be properly protected against: contact with persons, foreign bodies, contact with other parts of the system or short circuits.\u003cbr\/\u003e\u003cbr\/\u003eProduct description:\u003cbr\/\u003e\u003cbr\/\u003e- inverter, UPS, AVR and charger in one device\u003cbr\/\u003e- clear color display\u003cbr\/\u003e- high efficiency due to construction with toroidal transformer\u003cbr\/\u003e- high charging current\u003cbr\/\u003e- protection against overload, short circuit, overcharging and reverse polarity.\u003cbr\/\u003e\u003cbr\/\u003e\u003cbr\/\u003eTechnical parameters:\u003cbr\/\u003e\u003cbr\/\u003e- type of backup batteries: AGM, GEL\u003cbr\/\u003e- backup battery voltage: 12V DC\u003cbr\/\u003e- rated capacity: 800VA\u003cbr\/\u003e- rated power: 500W\u003cbr\/\u003e- transformer: toroid\u003cbr\/\u003e- input voltage: 230 V AC - 50Hz\u003cbr\/\u003e- output voltage: 230V AC ± 3% - 50Hz \/ pure sine wave\u003cbr\/\u003e- charging current: 5 A \/ 10 A optional\u003cbr\/\u003e- charging voltage: 13.6V ± 0.3V\u003cbr\/\u003e- low battery voltage limit: 11 V ± 0.3V\u003cbr\/\u003e- battery low voltage protection point: 10.5V ± 0.3V\u003cbr\/\u003e- transfer time: \u003c 4 ms\u003cbr\/\u003e- cooling system: Yes\u003cbr\/\u003e- operating temperature: 0 ~ 40°C\u003cbr\/\u003e- relative humidity: 10% ~ 90%\u003cbr\/\u003e- storage temperature: -15°~ 45°C\u003cbr\/\u003e- cable length to battery: 2 x 75 cm, M8\u003cbr\/\u003e- dimension: 145x180x237 mm\u003cbr\/\u003e- weight: 6,50 kg\u003cbr\/\u003e\u003cbr\/\u003eThe GETI lead - acid battery is suitable for smaller solar systems and as a battery replacement for UPS backup systems, backup sources for all EZS, EPS and telecommunications applications, emergency lighting and rechargeable lamps, toys, control systems, alarms, alert mobile and signaling devices,\u003cbr\/\u003eIt is a maintenance-free, hermetically sealed battery, allowing any working position.\u003cbr\/\u003e \u003cbr\/\u003e\u003cbr\/\u003eTechnical parameters:\u003cbr\/\u003e \u003cbr\/\u003e- production technology: VRLA - valve regulated lead acid\u003cbr\/\u003e- type: AGM battery\u003cbr\/\u003e- voltage: 12 V\u003cbr\/\u003e- capacity: 70 Ah\u003cbr\/\u003e- dimensions: 259 x 168 x 211 mm\u003cbr\/\u003e- overall height (with terminals): 214 mm\u003cbr\/\u003e- connection (terminals): Screw M6\u003cbr\/\u003e- internal resistance (fully charged battery): 7,5 m?\u003cbr\/\u003e- self-discharge \u003c3%, 25 ° C\u003cbr\/\u003e- weight: approx. 21,5 kg\u003cbr\/\u003e \u003cbr\/\u003eNominal capacity (25 ° C)\u003cbr\/\u003e76,3Ah - applies at rated current of 3.815A for 20 hours\u003cbr\/\u003e71,4Ah - applies at rated load 7.14A for 10 hours\u003cbr\/\u003e\u003cbr\/\u003ePackaging: 1 pc of backup source GETI GEP500 + lead battery 70AH\u003cbr\/\u003eweight: 28kg","brand":"GETI","offers":[{"title":"Default Title","offer_id":52558705983826,"sku":"04230614","price":4499.0,"currency_code":"CZK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0954\/9624\/1490\/files\/04230614.png?v=1774847230"},{"product_id":"zdroj-zalozni-geti-gep500-sinus-500w-baterie-100ah","title":"Backup power GETI GEP500 sinus 500W + battery 100Ah","description":"The GETI emergency power supply system (EPS - Emergency Power Supply) is a device that provides a source of alternating voltage in the event of a power failure. You can use the emergency power supply as a backup source for various pumps, automatic boilers, feeders, emergency lighting, camera systems and more. In normal mode, the connected device is powered directly from the network, and in the event of a failure, the emergency power system automatically switches to inverter mode. The connected device is then powered by the connected battery. If the power supply is not restored, the system EPS may be switched off at the moment when the voltage of the connected battery drops to a value of around 10.2V ± 0.3V. This is to protect the battery from deep discharge and subsequent damage. The EPS is equipped with a clear color display, a pure sine voltage converter based on a toroidal transformer and a fast 32-bit processor.\u003cbr\/\u003e\u003cbr\/\u003eWarning: the contacts of the connected battery must be properly protected against: contact with persons, foreign bodies, contact with other parts of the system or short circuits.\u003cbr\/\u003e\u003cbr\/\u003eProduct description:\u003cbr\/\u003e\u003cbr\/\u003e- inverter, UPS, AVR and charger in one device\u003cbr\/\u003e- clear color display\u003cbr\/\u003e- high efficiency due to construction with toroidal transformer\u003cbr\/\u003e- high charging current\u003cbr\/\u003e- protection against overload, short circuit, overcharging and reverse polarity.\u003cbr\/\u003e\u003cbr\/\u003e\u003cbr\/\u003eTechnical parameters:\u003cbr\/\u003e\u003cbr\/\u003e- type of backup batteries: AGM, GEL\u003cbr\/\u003e- backup battery voltage: 12V DC\u003cbr\/\u003e- rated capacity: 800VA\u003cbr\/\u003e- rated power: 500W\u003cbr\/\u003e- transformer: toroid\u003cbr\/\u003e- input voltage: 230 V AC - 50Hz\u003cbr\/\u003e- output voltage: 230V AC ± 3% - 50Hz \/ pure sine wave\u003cbr\/\u003e- charging current: 5 A \/ 10 A optional\u003cbr\/\u003e- charging voltage: 13.6V ± 0.3V\u003cbr\/\u003e- low battery voltage limit: 11 V ± 0.3V\u003cbr\/\u003e- battery low voltage protection point: 10.5V ± 0.3V\u003cbr\/\u003e- transfer time: \u003c 4 ms\u003cbr\/\u003e- cooling system: Yes\u003cbr\/\u003e- operating temperature: 0 ~ 40°C\u003cbr\/\u003e- relative humidity: 10% ~ 90%\u003cbr\/\u003e- storage temperature: -15°~ 45°C\u003cbr\/\u003e- cable length to battery: 2 x 75 cm, M8\u003cbr\/\u003e- dimension: 145x180x237 mm\u003cbr\/\u003e- weight: 6,50 kg\u003cbr\/\u003e\u003cbr\/\u003eThe gel type Geti lead-acid battery is especially suitable for solar and wind energy systems and caravans, but also as a battery replacement for UPS backup systems, backup power supplies, burglar alarm applications, EPS, telecommunications, mobile warning and signaling devices, etc. It is a maintenance-free, hermetically sealed battery which allows any working position.\u003cbr\/\u003e\u003cbr\/\u003e\u003cbr\/\u003eTechnical parameters:\u003cbr\/\u003e \u003cbr\/\u003e- production technology: VRLA - valve regulated lead acid\u003cbr\/\u003e- type: GEL\u003cbr\/\u003e- voltage: 12 V\u003cbr\/\u003e- capacity: 100 Ah\u003cbr\/\u003e- dimensions: 328 x 172 x 217 mm\u003cbr\/\u003e- overall height (with terminals): 220 mm\u003cbr\/\u003e- weight: approx. 29.5 kg\u003cbr\/\u003e- internal resistance (fully charged battery): 5 m?\u003cbr\/\u003e- self-discharge process \u003c3%, 25 ° C\u003cbr\/\u003e\u003cbr\/\u003ePackaging: 1 pc of backup source GETI GEP500 + lead battery 100AH\u003cbr\/\u003eweight: 37kg","brand":"GETI","offers":[{"title":"Default Title","offer_id":52558706114898,"sku":"04230615","price":6399.0,"currency_code":"CZK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0954\/9624\/1490\/files\/04230615_7a11054e-8c7a-41c4-9153-44bf6baedc9f.png?v=1776147602"},{"product_id":"zdroj-zalozni-geti-gep501-sinus-500w-nastenny-baterie-100ah","title":"Backup power GETI GEP501 sinus 500W Wall-mounted + baterie 100Ah","description":"The GETI emergency power supply system (EPS - Emergency Power Supply) is a device that provides a source of alternating voltage in the event of a power failure. You can use the Power Supply System (EPS) as a backup source for various pumps, automatic boilers, feeders, emergency lighting, camera systems and more. In normal mode, the connected device is powered directly from the network, and in the event of a failure, the emergency power system automatically switches to inverter mode. The connected device is then powered by the connected battery. If the power supply is not restored, the system (EPS) may switch off when the voltage of the connected battery drops to a value of around 10.2V ± 0.3V. This is to protect the battery from deep discharge and subsequent damage. The EPS is equipped with a clear colour display, a pure sine voltage converter based on a toroidal transformer and a fast 32-bit processor.\u003cbr\/\u003e\u003cbr\/\u003eWarning: the contacts of the connected battery must be properly protected against: contact with persons, foreign bodies, contact with other parts of the system or short circuits.\u003cbr\/\u003e\u003cbr\/\u003eProduct description:\u003cbr\/\u003e\u003cbr\/\u003e- inverter, UPS, AVR and charger in one device\u003cbr\/\u003e- clear LED colour display\u003cbr\/\u003e- high efficiency due to construction with toroidal transformer\u003cbr\/\u003e- high charging current\u003cbr\/\u003e- protection against overload, short circuit, overcharging and reverse polarity.\u003cbr\/\u003e\u003cbr\/\u003e\u003cbr\/\u003e\u003cbr\/\u003eTechnical parameters:\u003cbr\/\u003e\u003cbr\/\u003e- type of backup batteries: AGM, GEL\u003cbr\/\u003e- backup battery voltage: 12V DC\u003cbr\/\u003e- rated capacity: 800VA\u003cbr\/\u003e- rated power: 500W\u003cbr\/\u003e- transformer: toroid\u003cbr\/\u003e- input voltage: 230 V AC - 50Hz\u003cbr\/\u003e- output voltage: 220V AC ± 3% - 50Hz \/ pure sine wave\u003cbr\/\u003e- charging current: 10A\/ 15A\/ 20A optional\u003cbr\/\u003e- charging voltage: 13.6V ± 0.3V\u003cbr\/\u003e- low battery voltage limit: 10.9V ± 0.3V\u003cbr\/\u003e- battery low voltage protection point: 10.2V ± 0.3V\u003cbr\/\u003e- transfer time: \u003c 4 ms\u003cbr\/\u003e- cooling system: Yes\u003cbr\/\u003e- operating temperature: 0 ~ 40°C\u003cbr\/\u003e- relative humidity: 10% ~ 90%\u003cbr\/\u003e- storage temperature: -15°~ 45°C\u003cbr\/\u003e- cable length to battery: 2 x 75 cm, M8\u003cbr\/\u003e- dimension: 210x253x102 mm\u003cbr\/\u003e- weight: 4,5 kg\u003cbr\/\u003e\u003cbr\/\u003e\u003cbr\/\u003ePackaging: box 1pc \/ carton 2pc\u003cbr\/\u003eCarton weight: 8 kg\u003cbr\/\u003e\u003cbr\/\u003e\u003cbr\/\u003eThe gel type Geti lead-acid battery is especially suitable for solar and wind energy systems and caravans, but also as a battery replacement for UPS backup systems, backup power supplies, burglar alarm applications, EPS, telecommunications, mobile warning and signaling devices, etc. It is a maintenance-free, hermetically sealed battery which allows any working position.\u003cbr\/\u003e\u003cbr\/\u003e\u003cbr\/\u003eTechnical parameters:\u003cbr\/\u003e \u003cbr\/\u003e- production technology: VRLA - valve regulated lead acid\u003cbr\/\u003e- type: GEL\u003cbr\/\u003e- voltage: 12 V\u003cbr\/\u003e- capacity: 100 Ah\u003cbr\/\u003e- dimensions: 328 x 172 x 217 mm\u003cbr\/\u003e- overall height (with terminals): 220 mm\u003cbr\/\u003e- weight: approx. 29.5 kg\u003cbr\/\u003e- internal resistance (fully charged battery): 5 m?\u003cbr\/\u003e- self-discharge process \u003c3%, 25 ° C\u003cbr\/\u003e\u003cbr\/\u003ePackaging: 1 pc of backup source GETI GEP501 + lead battery 100AH\u003cbr\/\u003eweight: 35kg","brand":"GETI","offers":[{"title":"Default Title","offer_id":52558706245970,"sku":"04230620","price":6650.0,"currency_code":"CZK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0954\/9624\/1490\/files\/04230620_26b23662-65ef-45a9-b645-8366dc27c790.png?v=1776229690"},{"product_id":"zdroj-zalozni-kemot-prosinus-800-12v-230v-800va-500w-white-rozbaleno","title":"KEMOT PROsinus-800 12V 230V 800VA 500W White backup power supply – unboxed","description":"Sok háztartásban vannak olyan eszközök, amelyek megkönnyítik mindennapi életünket, de a megfelelő működéshez állandó áramellátásra van szükség. Az ilyen típusú berendezések közül a kemencék, szivattyúk és egyéb, a ház fűtését biztosító berendezések télen különös figyelmet érdemelnek. Ezért áramkimaradás esetén érdemes vészhelyzeti áramellátást biztosítani.\u003cbr\/\u003e\u003cbr\/\u003eOtthoni vészhelyzeti áramellátás\u003cbr\/\u003eA KEMOT vészhelyzeti áramellátó rendszerek megvédik a kiválasztott berendezéseket az áramkimaradásoktól, amelyek működésük megzavarását vagy megszakítását eredményezhetik.\u003cbr\/\u003e\u003cbr\/\u003eKíváncsi, milyen UPS-t válasszon gázkazánjához, vagy esetleg öko- vagy pelletkályhájához szeretne UPS-t? A KEMOT PROsinus készülékcsalád tökéletesen alkalmas vészhelyzeti áramellátásra a központi fűtőszivattyúk vagy a kandalló-berendezésekben lévő szivattyúk, valamint az indukciós motorok vagy például a hőkonvektorokat használó berendezések automatizálási berendezései és minden, a legkisebb feszültségváltozásokra rendkívül érzékeny készülék számára. Előnyük a kimeneti feszültség tiszta szinuszos hullámformája (a terhelést tápláló), amely stabil működést biztosít, megakadályozva az induktív terhelések túlmelegedésének hatását. Egy 12 V-os akkumulátorral együtt egy teljes tápegységet alkotnak 230 VAC garanciával.\u003cbr\/\u003e\u003cbr\/\u003eHáztartási szünetmentes tápegység - alkalmazások\u003cbr\/\u003eVészhelyzeti áramellátás kemencékhez\u003cbr\/\u003eRTV berendezések (TV-k, tunerek, hifi, DVD-k)\u003cbr\/\u003eHáztartási készülékek (hűtőszekrények, turmixgépek)\u003cbr\/\u003eElektromos szerszámok (fúrógépek, csiszológépek)\u003cbr\/\u003eTöltők áramellátása (okostelefonok, táblagépek, telefonok, laptopok)\u003cbr\/\u003eSzivattyúk, kompresszorok (víz, fűtés, légkondicionálás)\u003cbr\/\u003eIrodai berendezések (faxgépek, számítógépek, monitorok)\u003cbr\/\u003e\u003cbr\/\u003eBiztonságos vészhelyzeti áramellátás otthon\u003cbr\/\u003eA KEMOT vészhelyzeti tápegységek túlterhelés, rövidzárlat, valamint túl magas és túl alacsony feszültség elleni védelemmel rendelkeznek. Ez biztosítja a biztonságos munkavégzést otthonában.\u003cbr\/\u003e\u003cbr\/\u003eHárom üzemmód\u003cbr\/\u003eA töltési funkcióval ellátott vészhelyzeti tápegység üzemmód a külső akkumulátor által szolgáltatott 12V-os egyenfeszültséget 230V-os váltakozó feszültséggé alakítja és feltölti a külső akkumulátort. A töltő üzemmód a külső akkumulátort tölti. Az átalakító üzemmód az akkumulátorból származó 12V egyenfeszültséget 230V váltakozó feszültséggé alakítja át.\u003cbr\/\u003e\u003cbr\/\u003eSzünetmentes állandó fázisú tápegység\u003cbr\/\u003eA KEMOT vészhelyzeti tápegység fázisérzékeléssel ellátott készülékekkel működik, mint például egyes gázkazán modellek. A fázis a berendezésünkben állandó ponton van, függetlenül attól, hogy hálózati aljzatról vagy akkumulátorról kapja a tápellátást.\u003cbr\/\u003e\u003cbr\/\u003eVilágos LED kijelző\u003cbr\/\u003eA KEMOT PROSinus vészhelyzeti tápegységek világos LED kijelzővel vannak ellátva, amely a készülék aktuális működési állapotát mutatja. A kijelzőn többek között ellenőrizheti: a bemeneti feszültséget, a kimeneti feszültséget és a frekvenciát. Ezenkívül gyorsan ellenőrizheti a terhelési szintet és az akkumulátor töltöttségi szintjét.\u003cbr\/\u003e\u003cbr\/\u003eMűszaki adatok:\u003cbr\/\u003e\u003cbr\/\u003eNévleges teljesítmény: 500 W\u003cbr\/\u003eAkkumulátor típusa: 12 V DC\u003cbr\/\u003eAz akkumulátor maximális feszültsége: 15 V DC\u003cbr\/\u003eBemeneti feszültségtartomány: 190 - 260 V AC\u003cbr\/\u003eBemeneti frekvencia: 45 - 60 Hz\u003cbr\/\u003eKimeneti feszültségtartomány: 230 V AC +\/-5% \/ Inverter: 230 VAC +\/-3%\u003cbr\/\u003eKimeneti frekvencia: 50\/60 Hz +\/-0,5 Hz\u003cbr\/\u003eKimeneti feszültség alakja: tiszta szinuszhullám\u003cbr\/\u003eKimeneti hatásfok: \u003e= 85% (egyenáramról váltakozó áramra)\u003cbr\/\u003eAkkumulátor töltőáram: 10 A\u003cbr\/\u003eAkkumulátor kapacitás: 50 -. 200 Ah (ajánlott: 80 Ah)\u003cbr\/\u003eBecsült töltési idő: 4-14 óra (az akkumulátor kapacitásától függően)\u003cbr\/\u003eBekapcsolási idő: =\u003c 4 ms\u003cbr\/\u003eVédelem: túlterhelés, rövidzárlat, túl magas vagy túl alacsony feszültség ellen.\u003cbr\/\u003eMegengedett üzemi hőmérséklet: 0 - 40 °C\u003cbr\/\u003eMegengedett páratartalom: 10 - 90%\u003cbr\/\u003eMéretek: 14,5 x 18 x 24 cm\u003cbr\/\u003eSúly: 4,6 kg","brand":"KEMOT","offers":[{"title":"Default Title","offer_id":52637764387154,"sku":"90329597","price":1749.0,"currency_code":"CZK","in_stock":true}]},{"product_id":"zdroj-zalozni-kemot-prosinus-500-12v-230v-500va-300w-black-nastenny-rozbaleno-polepeny-obal","title":"KEMOT PROsinus-500 12V 230V 500VA 300W Black wall-mounted backup power supply – unboxed","description":"Sok háztartásban vannak olyan eszközök, amelyek megkönnyítik mindennapi életünket, de a megfelelő működéshez állandó áramellátásra van szükség. Az ilyen típusú berendezések közül a kemencék, szivattyúk és egyéb, a ház fűtését biztosító berendezések télen különös figyelmet érdemelnek. Ezért áramkimaradás esetén érdemes vészhelyzeti áramellátást biztosítani.\u003cbr\/\u003e\u003cbr\/\u003eOtthoni vészhelyzeti áramellátás\u003cbr\/\u003eA KEMOT vészhelyzeti áramellátó rendszerek megvédik a kiválasztott berendezéseket az áramkimaradásoktól, amelyek működésük megzavarását vagy megszakítását eredményezhetik.\u003cbr\/\u003e\u003cbr\/\u003eKíváncsi, milyen UPS-t válasszon gázkazánjához, vagy esetleg öko- vagy pelletkályhájához szeretne UPS-t? A KEMOT PROsinus készülékcsalád tökéletesen alkalmas vészhelyzeti áramellátásra a központi fűtőszivattyúk vagy a kandalló-berendezésekben lévő szivattyúk, valamint az indukciós motorok vagy például a hőkonvektorokat használó berendezések automatizálási berendezései és minden, a legkisebb feszültségváltozásokra rendkívül érzékeny készülék számára. Előnyük a kimeneti feszültség tiszta szinuszos hullámformája (a terhelést tápláló), amely stabil működést biztosít, megakadályozva az induktív terhelések túlmelegedésének hatását. Egy 12 V-os akkumulátorral együtt egy teljes tápegységet alkotnak 230 VAC garanciával.\u003cbr\/\u003e\u003cbr\/\u003eHáztartási szünetmentes tápegység - alkalmazások\u003cbr\/\u003eVészhelyzeti áramellátás kemencékhez\u003cbr\/\u003eRTV berendezések (TV-k, tunerek, hifi, DVD-k)\u003cbr\/\u003eHáztartási készülékek (hűtőszekrények, turmixgépek)\u003cbr\/\u003eElektromos szerszámok (fúrógépek, csiszológépek)\u003cbr\/\u003eTöltők áramellátása (okostelefonok, táblagépek, telefonok, laptopok)\u003cbr\/\u003eSzivattyúk, kompresszorok (víz, fűtés, légkondicionálás)\u003cbr\/\u003eIrodai berendezések (faxgépek, számítógépek, monitorok)\u003cbr\/\u003e\u003cbr\/\u003eBiztonságos vészhelyzeti áramellátás otthon\u003cbr\/\u003eA KEMOT vészhelyzeti tápegységek túlterhelés, rövidzárlat, valamint túl magas és túl alacsony feszültség elleni védelemmel rendelkeznek. Ez biztosítja a biztonságos munkavégzést otthonában.\u003cbr\/\u003e\u003cbr\/\u003eHárom üzemmód\u003cbr\/\u003eA töltési funkcióval ellátott vészhelyzeti tápegység üzemmód a külső akkumulátorról szolgáltatott 12V-os egyenfeszültséget 230V-os váltakozó feszültséggé alakítja és feltölti a külső akkumulátort. A töltő üzemmód a külső akkumulátort tölti. Az átalakító üzemmód az akkumulátorból származó 12V egyenfeszültséget 230V váltakozó feszültséggé alakítja át.\u003cbr\/\u003e\u003cbr\/\u003eSzünetmentes állandó fázisú tápegység\u003cbr\/\u003eA KEMOT vészhelyzeti tápegység fázisérzékeléssel ellátott készülékekkel működik, mint például egyes gázkazán modellek. A fázis a berendezésünkben állandó ponton van, függetlenül attól, hogy hálózati aljzatról vagy akkumulátorról kapja a tápellátást.\u003cbr\/\u003e\u003cbr\/\u003eVészhelyzeti tápegység kályhához akkumulátorral\u003cbr\/\u003eA KEMOT vészhelyzeti tápegység legmagasabb színvonalú működésének biztosítása érdekében megfelelő akkumulátort kell választania hozzá. Az optimális akkumulátort a következő hozzávetőleges képlet alapján lehet kiválasztani: 100 W terhelés = 10 A elemfelvétel.\u003cbr\/\u003e\u003cbr\/\u003eVilágos LED kijelző\u003cbr\/\u003eA KEMOT PROSinus vészhelyzeti tápegységek világos LED-kijelzővel vannak felszerelve, amely a készülék aktuális működési állapotát mutatja. A kijelzőn többek között ellenőrizhető: a bemeneti feszültség, a kimeneti feszültség és a frekvencia. Ezenkívül gyorsan ellenőrizheti a terhelési szintet és az akkumulátor töltöttségi szintjét.\u003cbr\/\u003e\u003cbr\/\u003eMűszaki adatok:\u003cbr\/\u003e\u003cbr\/\u003eNévleges teljesítmény: 300 W\u003cbr\/\u003eAkkumulátor típusa: 12 V DC\u003cbr\/\u003eMaximális akkumulátor-feszültség: 15 V DC\u003cbr\/\u003eBemeneti feszültségtartomány: 180~275 V AC\u003cbr\/\u003eBemeneti frekvencia: 45 ~ 60 Hz\u003cbr\/\u003eKimeneti feszültségtartomány: 230 V AC +\/-8%\u003cbr\/\u003eKimeneti frekvencia: 50 \/60 Hz +\/-0,5 Hz\u003cbr\/\u003eKimeneti feszültség alakja: tiszta szinuszhullám\u003cbr\/\u003eKimeneti hatásfok \u003e=85% (egyenáramról váltakozó áramra)\u003cbr\/\u003eAkkumulátor töltőáram: Max. 10 A\u003cbr\/\u003eAkkumulátor kapacitás: 50-200 Ah (ajánlott: 55 Ah)\u003cbr\/\u003eBekapcsolási idő: \u003c=4 ms\u003cbr\/\u003eTúlterhelés, rövidzárlat, túl- vagy alulfeszültség elleni védelem\u003cbr\/\u003eMegengedett üzemi hőmérséklet: 0-40°C\u003cbr\/\u003eMegengedett páratartalom: 10-90%\u003cbr\/\u003eMéretek: 25,5 x 26 x 16 cm\u003cbr\/\u003eSúly: 4,7 kg\u003cbr\/\u003e","brand":"KEMOT","offers":[{"title":"Default Title","offer_id":52637764419922,"sku":"90329599","price":1649.0,"currency_code":"CZK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0954\/9624\/1490\/files\/90329599.png?v=1773871689"},{"product_id":"zdroj-zalozni-geti-gep501-sinus-500w-nastenny-rozbaleno-poskozeny-obal-kontrolne-vybaleno","title":"GETI GEP501 500W sine wave wall-mounted backup power supply – unboxed","description":"Erre a termékre 3 év garancia vonatkozik.\u003cbr\/\u003e\u003cbr\/\u003eA GETI Emergency Power Supply (EPS) rendszer egy olyan eszköz, amely váltakozó áramforrást biztosít az elektromos hálózat meghibásodása esetén. A vészhelyzeti áramellátó rendszert tartalék áramforrásként használhatja különböző szivattyúk, automata kazánok, tápegységek, vészvilágítás, kamerarendszerek és egyéb eszközök számára. Normál üzemmódban a csatlakoztatott berendezések közvetlenül a hálózatról kapnak áramot, és áramkimaradás esetén a vészhelyzeti áramellátó rendszer automatikusan inverteres üzemmódra vált. A csatlakoztatott készüléket ekkor a csatlakoztatott akkumulátor táplálja. Abban az esetben, ha az áramellátás nem áll helyre, a vészhelyzeti áramellátó rendszer kikapcsolható, amikor a csatlakoztatott akkumulátor feszültsége körülbelül 10,2V ± 0,3V-ra csökken. Ez az akkumulátor mélykisüléstől és az azt követő károsodástól való védelmét szolgálja. Az EPS világos színes kijelzővel, toroid transzformátoron alapuló tiszta szinuszos feszültségátalakítóval és gyors 32 bites processzorral rendelkezik.\u003cbr\/\u003e\u003cbr\/\u003eVigyázat: a csatlakoztatott akkumulátor érintkezőit megfelelően védeni kell a következők ellen: személyek, idegen testek, a rendszer más részeivel való érintkezés vagy rövidzárlat.\u003cbr\/\u003e\u003cbr\/\u003eTermékleírás: Az akkumulátorok és az akkumulátorok a következők: - A termék leírása:\u003cbr\/\u003e\u003cbr\/\u003e- Inverter, UPS, AVR és töltő egy egységben.\u003cbr\/\u003e- világos színes kijelző\u003cbr\/\u003e- magas hatásfok a toroid transzformátor kialakításának köszönhetően\u003cbr\/\u003e- nagy töltőáram\u003cbr\/\u003e- Túlterhelés-, rövidzárlat-, túlterhelés- és túlfeszültségvédelem.\u003cbr\/\u003e\u003cbr\/\u003e\u003cbr\/\u003eMűszaki paraméterek:\u003cbr\/\u003e\u003cbr\/\u003e- AGM, GEL (nem tartozék).\u003cbr\/\u003e- tartalék akkumulátorok feszültsége: 12V DC\u003cbr\/\u003e- névleges kapacitás: 800VA\u003cbr\/\u003e- névleges teljesítmény: 500W\u003cbr\/\u003e- transzformátor: toroid\u003cbr\/\u003e- bemeneti feszültség: 230 V AC - 50Hz\u003cbr\/\u003e- kimeneti feszültség: 220V AC ± 3% - 50Hz \/ tiszta szinuszhullám\u003cbr\/\u003e- töltőáram: 10A\/ 15A\/ 20A választható\u003cbr\/\u003e- Töltési feszültség: 13,6V ± 0,3V\u003cbr\/\u003e- Alacsony akkumulátor feszültség határérték: 10,9V ± 0,3V\u003cbr\/\u003e- Alacsony akkumulátor feszültség lekapcsolás elleni védelem: 10,2V ± 0,3V\u003cbr\/\u003e- terheletlen fogyasztás: hálózat 0,2 A (kb. 55 W), akkumulátor 1,1 A (13,2 W)\u003cbr\/\u003e- válaszidő: \u003c 4 ms\u003cbr\/\u003e- hűtés: Igen\u003cbr\/\u003e- Üzemi hőmérséklet: 0 ~ 40°C\u003cbr\/\u003e- relatív páratartalom: 10% ~ 90%\u003cbr\/\u003e- Tárolási hőmérséklet: -15° ~ 45°C\u003cbr\/\u003e- Akkumulátor kábel hossza: 2 x 75cm, M8\u003cbr\/\u003e- Méret: 210x253x102 mm\u003cbr\/\u003e- Súly: 4,5 kg\u003cbr\/\u003e\u003cbr\/\u003e\u003cbr\/\u003eCsomagolás: doboz 1db \/ karton 2db\u003cbr\/\u003eKarton súlya: 8kg","brand":"GETI","offers":[{"title":"Default Title","offer_id":52690937446738,"sku":"90329670","price":1999.0,"currency_code":"CZK","in_stock":true}]},{"product_id":"zdroj-zalozni-geti-gep701-sinus-700w-nastenny-rozbaleno-polepeny-obal-kontrolne-vyzkouseno","title":"GETI GEP701 700W sine wave wall-mounted backup power supply – unboxed","description":"Erre a termékre 3 év garancia vonatkozik.\u003cbr\/\u003e\u003cbr\/\u003eA GETI vészhelyzeti tápegység (EPS) tiszta szinuszhullámú kimenettel olyan eszköz, amely hálózati hiba esetén váltakozó áramforrást biztosít. A vészhelyzeti áramellátó rendszer tartalék áramforrásként használható különböző szivattyúk, automata kazánok, tápegységek, vészvilágítás, kamerarendszerek és egyéb rendszerek számára. Normál üzemmódban a csatlakoztatott berendezések közvetlenül a hálózatról kapnak áramot, kiesés esetén pedig a vészhelyzeti áramellátó rendszer automatikusan inverteres üzemmódra vált. A csatlakoztatott készüléket ekkor a csatlakoztatott akkumulátor táplálja. Abban az esetben, ha az áramellátás nem áll helyre, a vészhelyzeti áramellátó rendszer kikapcsolható, amikor a csatlakoztatott akkumulátor feszültsége körülbelül 10,2V ± 0,3V-ra csökken. Ez az akkumulátor mélykisüléstől és az azt követő károsodástól való védelmét szolgálja. Az EPS világos színes kijelzővel, toroid transzformátoron alapuló tiszta szinuszos feszültségátalakítóval és gyors 32 bites processzorral rendelkezik.\u003cbr\/\u003e\u003cbr\/\u003eVigyázat: a csatlakoztatott akkumulátor érintkezőit megfelelően védeni kell a következők ellen: személyek, idegen testek, a rendszer más részeivel való érintkezés vagy rövidzárlat.\u003cbr\/\u003e\u003cbr\/\u003eTermékleírás: Az akkumulátorok és az akkumulátorok a következők: - A termék leírása:\u003cbr\/\u003e\u003cbr\/\u003e- Inverter, UPS, AVR és töltő egy egységben.\u003cbr\/\u003e- világos színes kijelző\u003cbr\/\u003e- magas hatásfok a toroid transzformátor kialakításnak köszönhetően\u003cbr\/\u003e- nagy töltőáram\u003cbr\/\u003e- Túlterhelés-, rövidzárlat-, túlterhelés- és túlfeszültségvédelem.\u003cbr\/\u003e\u003cbr\/\u003e\u003cbr\/\u003eMűszaki paraméterek:\u003cbr\/\u003e\u003cbr\/\u003e- AGM, GEL (nem tartozék).\u003cbr\/\u003e- tartalék akkumulátorok feszültsége: 12V DC\u003cbr\/\u003e- névleges kapacitás: 1000VA\u003cbr\/\u003e- névleges teljesítmény: 700W\u003cbr\/\u003e- transzformátor: toroid\u003cbr\/\u003e- bemeneti feszültség: 230 V AC - 50Hz\u003cbr\/\u003e- kimeneti feszültség: 220V AC ± 3% - 50Hz \/ tiszta szinuszhullám\u003cbr\/\u003e- töltőáram: 10A\/ 20A választható\u003cbr\/\u003e- Töltési feszültség: 13,8V ± 0,3V\u003cbr\/\u003e- Alacsony akkumulátor feszültség határérték: 10,9V ± 0,3V\u003cbr\/\u003e- Alacsony akkumulátor feszültség lekapcsolás elleni védelem: 10,2V ± 0,3V\u003cbr\/\u003e- terheletlen fogyasztás: hálózat 0,2 A (kb. 55 W), akkumulátor 1,1 A (13,2 W)\u003cbr\/\u003e- válaszidő: \u003c 4 ms\u003cbr\/\u003e- hűtés: Igen\u003cbr\/\u003e- Üzemi hőmérséklet: 0 ~ 40°C\u003cbr\/\u003e- relatív páratartalom: 10% ~ 90%\u003cbr\/\u003e- Tárolási hőmérséklet: -15° ~ 45°C\u003cbr\/\u003e- Akkumulátor kábel hossza: 2 x 75cm, M8\u003cbr\/\u003e- Méret: 311 x 232 x 140 mm\u003cbr\/\u003e- súly: 6,50 kg\u003cbr\/\u003e\u003cbr\/\u003e\u003cbr\/\u003eCsomagolás: doboz 1db \/ karton 1db\u003cbr\/\u003eKarton súlya: 7.50 kg","brand":"GETI","offers":[{"title":"Default Title","offer_id":52782564344146,"sku":"90329733","price":2539.0,"currency_code":"CZK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0954\/9624\/1490\/files\/90329733_3b101615-794f-4001-af03-8f8a10c18aa4.png?v=1776149848"},{"product_id":"zdroj-zalozni-kemot-prosinus-2600-24-lfp4-24v-230v-2600va-1800w-black-urz3429-lfp4","title":"Backup power supply KEMOT PROsinus-2600\/24-LFP4 24V 230V 2600VA 1800W Black URZ3429-LFP4","description":"Emergency power supply KEMOT PROsinus-2600\/24-LFP4\u003cbr\/\u003e\u003cbr\/\u003eTechnical parameters:\u003cbr\/\u003e\u003cbr\/\u003eRated power: 1800 W\u003cbr\/\u003eBattery type: 24 V DC\u003cbr\/\u003eMaximum battery voltage: 15 V DC\u003cbr\/\u003eInput voltage range: 190 - 260 V AC\u003cbr\/\u003eInput frequency: 45 - 60 Hz\u003cbr\/\u003eOutput voltage range: 206 - 242 V AC +\/-5% \/ Inverter: 230 V AC +\/-3%\u003cbr\/\u003eOutput frequency: 50\/60 Hz +\/-0.5 Hz\u003cbr\/\u003eOutput voltage shape: Pure sine wave\u003cbr\/\u003eOutput efficiency: \u003e= 85% (DC to AC)\u003cbr\/\u003eBattery charging current: Max. 20 A\u003cbr\/\u003eBattery capacity: 50–200 Ah (recommended: 55 Ah)\u003cbr\/\u003eEstimated charging time: 4–14 hours (depending on battery capacity)\u003cbr\/\u003eTransmission time: =\u003c 4 ms\u003cbr\/\u003eProtections: Overload, short circuit, overvoltage, undervoltage\u003cbr\/\u003ePermissible operating temperature: 0–40 °C\u003cbr\/\u003ePermissible humidity: 10–90%\u003cbr\/\u003eWeight: 11.5 kg\u003cbr\/\u003eDimensions: 138 x 276 x 155 mm","brand":"KEMOT","offers":[{"title":"Default Title","offer_id":52824741839186,"sku":"08840410","price":5355.0,"currency_code":"CZK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0954\/9624\/1490\/files\/08840410.png?v=1774556283"},{"product_id":"zdroj-zalozni-rebel-power-500-12v-230v-500va-300w-black-nastenny-rozbaleno-mirne-poskozeny-obal","title":"REBEL POWER-500 300W wall-mounted backup power supply, black – unboxed","description":"Ha otthon olyan eszközei vannak, amelyeknek a megfelelő működéshez folyamatos áramellátásra van szükségük, érdemes beruházni egy szünetmentes tápegységbe is. Ez a készülék különösen télen hasznos, mert áramszünet esetén stabilan tartja a kemencét, a szivattyút vagy más, a ház fűtését biztosító berendezéseket.\u003cbr\/\u003e\u003cbr\/\u003eOtthoni vészhelyzeti áramellátás\u003cbr\/\u003eA Rebel vészhelyzeti áramellátó rendszerek célja, hogy megvédjék a berendezéseket az áramkimaradástól és ennek következtében a működésük megszakadásától vagy megszakításától.\u003cbr\/\u003e\u003cbr\/\u003eKíváncsi, milyen UPS-t válasszon gázkazánjához, vagy esetleg öko- vagy pelletkályhájához szeretne UPS-t? A Rebel POWER készülékcsaládja tökéletesen alkalmas a központi fűtőszivattyúk vagy a kandalló-berendezésekben lévő szivattyúk, valamint az indukciós motorok vagy például a hőkonvektorokat használó berendezések automatizálására szolgáló berendezések és minden olyan berendezés vészhelyzeti áramellátására, amely rendkívül érzékeny a feszültség hullámformájának legkisebb változásaira. Előnyük a kimeneti feszültség tiszta szinuszos hullámformája (a terhelést tápláló), amelynek köszönhetően a készülék stabil működést biztosít, elkerülve az induktív terhelések túlmelegedésének hatását. Egy 12 V-os akkumulátorral együtt egy teljes tápegységet alkotnak 230 VAC garanciával.\u003cbr\/\u003e\u003cbr\/\u003eHáztartási szünetmentes tápegység - alkalmazások\u003cbr\/\u003eVészhelyzeti áramellátás kemencékhez\u003cbr\/\u003eRTV berendezések (TV-k, tunerek, hifi, DVD-k)\u003cbr\/\u003eHáztartási készülékek (hűtőszekrények, turmixgépek)\u003cbr\/\u003eElektromos szerszámok (fúrógépek, csiszológépek)\u003cbr\/\u003eTöltők áramellátása (okostelefonok, táblagépek, telefonok, laptopok)\u003cbr\/\u003eSzivattyúk, kompresszorok (víz, fűtés, légkondicionálás)\u003cbr\/\u003eIrodai berendezések (faxgépek, számítógépek, monitorok)\u003cbr\/\u003e\u003cbr\/\u003eGarantált biztonság\u003cbr\/\u003eA Rebel tartalék tápegységek számos védelemmel vannak ellátva, például túlterhelés-, rövidzárlat-, túl- és alulfeszültség-védelemmel. Az alkalmazott megoldások a biztonság és az Ön nyugalmának alapját képezik!\u003cbr\/\u003e\u003cbr\/\u003eHárom üzemmód\u003cbr\/\u003eA töltési funkcióval ellátott vészhelyzeti áramellátási üzemmód a külső akkumulátorból szolgáltatott 12V-os egyenfeszültséget 230V-os váltakozó feszültséggé alakítja, és feltölti a külső akkumulátort. A töltő üzemmód a külső akkumulátort tölti. Az átalakító üzemmód az akkumulátorból származó 12V egyenfeszültséget 230V váltakozó feszültséggé alakítja át.\u003cbr\/\u003e\u003cbr\/\u003eSzünetmentes állandó fázisú tápegység\u003cbr\/\u003eA Rebel tartalék tápegység fázisérzékeléssel ellátott készülékekkel működik, mint például egyes gázkazán modellek. A fázis a berendezésünkben állandó ponton van, függetlenül attól, hogy hálózati aljzatról vagy akkumulátorról kapja a tápellátást.\u003cbr\/\u003e\u003cbr\/\u003eA tápellátáshoz szükséges akkumulátor nem tartozék.\u003cbr\/\u003e\u003cbr\/\u003eLED kijelző\u003cbr\/\u003eA Rebel szünetmentes tápegység kényelmes használatát egy jól látható LED kijelző biztosítja. Ennek köszönhetően könnyen leolvashatja a készülék aktuális működési állapotát, ellenőrizheti többek között: bemeneti feszültség, kimeneti feszültség és frekvencia. Ezenkívül gyorsan ellenőrizheti a terhelési szintet és az akkumulátor töltöttségi szintjét.\u003cbr\/\u003e\u003cbr\/\u003eMűszaki paraméterek:\u003cbr\/\u003e\u003cbr\/\u003eNévleges teljesítmény: 300 W\u003cbr\/\u003eAkkumulátor típusa: 12 V DC\u003cbr\/\u003eMaximális akkumulátor feszültség: 15 V DC\u003cbr\/\u003eBemeneti feszültségtartomány: 180~275 V AC\u003cbr\/\u003eBemeneti frekvencia: 45 ~ 60 Hz\u003cbr\/\u003eKimeneti feszültségtartomány: 230 V AC +\/-8%\u003cbr\/\u003eKimeneti frekvencia: 50 \/60 Hz +\/-0,5 Hz\u003cbr\/\u003eKimeneti feszültség alakja: tiszta szinuszhullám\u003cbr\/\u003eKimeneti hatásfok \u003e=85% (egyenáramról váltakozó áramra)\u003cbr\/\u003eAkkumulátor töltőáram: Max. 10 A\u003cbr\/\u003eKapcsolási idő: \u003c=4 ms\u003cbr\/\u003eVédelem: Túlterhelés, rövidzárlat, túl magas vagy túl alacsony feszültség túlterhelés\u003cbr\/\u003eMegengedett üzemi hőmérséklet: 0-40°C\u003cbr\/\u003eMegengedett páratartalom: 10-90%\u003cbr\/\u003eMéretek: 215 x 265 x 100 mm\u003cbr\/\u003eSúly: 4,7 kg\u003cbr\/\u003e","brand":"REBEL","offers":[{"title":"Default Title","offer_id":52857682690386,"sku":"90329777","price":1699.0,"currency_code":"CZK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0954\/9624\/1490\/files\/90329777_ac18bedc-c95f-45c2-8e77-ceb95215e2c3.png?v=1776149738"},{"product_id":"zdroj-zalozni-rebel-power-800-12v-230v-800va-500w-black-nastenny-rozbaleno-kontrolne-vyzkouseno","title":"REBEL POWER-800 500W wall-mounted backup power supply, black – unboxed","description":"Ha otthon olyan eszközei vannak, amelyeknek a megfelelő működéshez folyamatos áramellátásra van szükségük, érdemes beruházni egy szünetmentes tápegységbe is. Ez a készülék különösen télen hasznos, mert áramszünet esetén stabilan tartja a kemencét, a szivattyút vagy más, a ház fűtését biztosító berendezéseket.\u003cbr\/\u003e\u003cbr\/\u003eOtthoni vészhelyzeti áramellátás\u003cbr\/\u003eA Rebel vészhelyzeti áramellátó rendszerek célja, hogy megvédjék a berendezéseket az áramkimaradástól és ennek következtében a működésük megszakadásától vagy megszakításától.\u003cbr\/\u003e\u003cbr\/\u003eKíváncsi, milyen UPS-t válasszon gázkazánjához, vagy esetleg öko- vagy pelletkályhájához szeretne UPS-t? A Rebel POWER készülékcsaládja tökéletesen alkalmas a központi fűtőszivattyúk vagy a kandalló-berendezésekben lévő szivattyúk, valamint az indukciós motorok vagy például a hőkonvektorokat használó berendezések automatizálására szolgáló berendezések és minden olyan berendezés vészhelyzeti áramellátására, amely rendkívül érzékeny a feszültség hullámformájának legkisebb változásaira. Előnyük a kimeneti feszültség tiszta szinuszos hullámformája (a terhelést tápláló), amelynek köszönhetően a készülék stabil működést biztosít, elkerülve az induktív terhelések túlmelegedésének hatását. Egy 12 V-os akkumulátorral együtt egy teljes tápegységet alkotnak 230 VAC garanciával.\u003cbr\/\u003e\u003cbr\/\u003eHáztartási szünetmentes tápegység - alkalmazások\u003cbr\/\u003e- Kemencék vészhelyzeti áramellátása- Szórakoztató elektronika (TV, tuner, hifi, DVD)- Háztartási gépek (hűtőszekrények, turmixgépek)- Elektromos szerszámok (fúrógépek, köszörűgépek)- Töltők áramellátása (okostelefonok, táblagépek, telefonok, laptopok)- Szivattyúk, kompresszorok (víz, fűtés, légkondicionálás)- Irodai berendezések (faxok, számítógépek, monitorok).\u003cbr\/\u003e\u003cbr\/\u003eGarantált biztonság\u003cbr\/\u003eA Rebel tartalék tápegységek számos védelemmel vannak felszerelve, például túlterhelés-, rövidzárlat-, túl- és alulfeszültség-védelemmel. Az alkalmazott megoldások a biztonság és az Ön nyugalmának alapját képezik!\u003cbr\/\u003e\u003cbr\/\u003eHárom üzemmód\u003cbr\/\u003eA töltési funkcióval ellátott vészhelyzeti áramellátási üzemmód a külső akkumulátorból szolgáltatott 12V-os egyenfeszültséget 230V-os váltakozó feszültséggé alakítja, és feltölti a külső akkumulátort. A töltő üzemmód a külső akkumulátort tölti. Az átalakító üzemmód az akkumulátorból származó 12V egyenfeszültséget 230V váltakozó feszültséggé alakítja át.\u003cbr\/\u003e\u003cbr\/\u003eSzünetmentes állandó fázisú tápegység\u003cbr\/\u003eA Rebel tartalék tápegység fázisérzékeléssel ellátott készülékekkel működik, mint például egyes gázkazán modellek. A fázis a berendezésünkben állandó ponton van, függetlenül attól, hogy hálózati aljzatról vagy akkumulátorról kapja a tápellátást.\u003cbr\/\u003e\u003cbr\/\u003eA tápellátáshoz szükséges akkumulátor nem tartozék.\u003cbr\/\u003e\u003cbr\/\u003eLED kijelző\u003cbr\/\u003eA Rebel szünetmentes tápegység kényelmes használatát egy jól látható LED kijelző biztosítja. Ennek köszönhetően könnyen leolvashatja a készülék aktuális működési állapotát, ellenőrizheti többek között: bemeneti feszültség, kimeneti feszültség és frekvencia. Ezenkívül gyorsan ellenőrizheti a terhelési szintet és az akkumulátor töltöttségi szintjét.\u003cbr\/\u003e\u003cbr\/\u003eMűszaki paraméterek:\u003cbr\/\u003e\u003cbr\/\u003eNévleges teljesítmény: 500 W\u003cbr\/\u003eAkkumulátor típusa: 12 V DC\u003cbr\/\u003eAz akkumulátor maximális feszültsége: 15 V DC\u003cbr\/\u003eBemeneti feszültségtartomány: 180~275 V AC\u003cbr\/\u003eBemeneti frekvencia: 45 ~ 60 Hz\u003cbr\/\u003eKimeneti feszültségtartomány: 230 V AC +\/-8%\u003cbr\/\u003eKimeneti frekvencia: 50 \/60 Hz +\/-0,5 Hz\u003cbr\/\u003eKimeneti feszültség alakja: tiszta szinuszhullám\u003cbr\/\u003eKimeneti hatásfok \u003e=85% (egyenáramról váltakozó áramra)\u003cbr\/\u003eAkkumulátor töltőáram: Max. 10 A\u003cbr\/\u003eKapcsolási idő: \u003c=4 ms\u003cbr\/\u003eVédelem: Túlterhelés, rövidzárlat, túl magas vagy túl alacsony feszültség túlterhelés\u003cbr\/\u003eMegengedett üzemi hőmérséklet: 0-40°C\u003cbr\/\u003eMegengedett páratartalom: 10-90%\u003cbr\/\u003eMéretek: 215 x 265 x 100 mm\u003cbr\/\u003eSúly: 4,7 kg","brand":"REBEL","offers":[{"title":"Default Title","offer_id":52990947492178,"sku":"90329824","price":1899.0,"currency_code":"CZK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0954\/9624\/1490\/files\/90329824.png?v=1777019415"},{"product_id":"zdroj-zalozni-kemot-prosinus-2200-12v-230v-2200va-1600w-black-nastenny-rozbaleno","title":"KEMOT PROsinus-2200 12V 230V 2200VA 1600W Black backup power supply – unboxed","description":"Sok háztartásban vannak olyan eszközök, amelyek megkönnyítik mindennapi életünket, de a megfelelő működéshez állandó áramellátásra van szükség. Az ilyen típusú berendezések közül a kemencék, szivattyúk és egyéb, a ház fűtését biztosító berendezések télen különös figyelmet érdemelnek. Ezért áramkimaradás esetén érdemes vészhelyzeti áramellátást biztosítani.\u003cbr\/\u003e\u003cbr\/\u003eOtthoni vészhelyzeti áramellátás\u003cbr\/\u003eA KEMOT vészhelyzeti áramellátó rendszerek megvédik a kiválasztott berendezéseket az áramkimaradásoktól, amelyek működésük megzavarását vagy megszakítását eredményezhetik.\u003cbr\/\u003e\u003cbr\/\u003eKíváncsi, milyen UPS-t válasszon gázkazánjához, vagy esetleg öko- vagy pelletkályhájához szeretne UPS-t? A KEMOT PROsinus készülékcsalád tökéletesen alkalmas vészhelyzeti áramellátásra a központi fűtőszivattyúk vagy a kandalló-berendezésekben lévő szivattyúk, valamint az indukciós motorok vagy például a hőkonvektorokat használó berendezések automatizálási berendezései és minden, a legkisebb feszültségváltozásokra rendkívül érzékeny készülék számára. Előnyük a kimeneti feszültség tiszta szinuszos hullámformája (a terhelést tápláló), amely stabil működést biztosít, megakadályozva az induktív terhelések túlmelegedésének hatását. Egy 12 V-os akkumulátorral együtt egy teljes tápegységet alkotnak 230 VAC garanciával.\u003cbr\/\u003e\u003cbr\/\u003eHáztartási szünetmentes tápegység - alkalmazások\u003cbr\/\u003eVészhelyzeti áramellátás kemencékhez\u003cbr\/\u003eRTV berendezések (TV-k, tunerek, hifi, DVD-k)\u003cbr\/\u003eHáztartási készülékek (hűtőszekrények, turmixgépek)\u003cbr\/\u003eElektromos szerszámok (fúrógépek, csiszológépek)\u003cbr\/\u003eTöltők áramellátása (okostelefonok, táblagépek, telefonok, laptopok)\u003cbr\/\u003eSzivattyúk, kompresszorok (víz, fűtés, légkondicionálás)\u003cbr\/\u003eIrodai berendezések (faxgépek, számítógépek, monitorok)\u003cbr\/\u003e\u003cbr\/\u003eBiztonságos vészhelyzeti áramellátás otthon\u003cbr\/\u003eA KEMOT vészhelyzeti tápegységek túlterhelés, rövidzárlat, valamint túl magas és túl alacsony feszültség elleni védelemmel rendelkeznek. Ez biztosítja a biztonságos munkavégzést otthonában.\u003cbr\/\u003e\u003cbr\/\u003eHárom üzemmód\u003cbr\/\u003eA töltési funkcióval ellátott vészhelyzeti tápegység üzemmód a külső akkumulátorról szolgáltatott 12V-os egyenfeszültséget 230V-os váltakozó feszültséggé alakítja és feltölti a külső akkumulátort. A töltő üzemmód a külső akkumulátort tölti. Az átalakító üzemmód az akkumulátorból származó 12V egyenfeszültséget 230V váltakozó feszültséggé alakítja át.\u003cbr\/\u003e\u003cbr\/\u003eSzünetmentes állandó fázisú tápegység\u003cbr\/\u003eA KEMOT vészhelyzeti tápegység fázisérzékeléssel ellátott készülékekkel működik, mint például egyes gázkazán modellek. A fázis a berendezésünkben állandó ponton van, függetlenül attól, hogy hálózati aljzatról vagy akkumulátorról kapja a tápellátást.\u003cbr\/\u003e\u003cbr\/\u003eVilágos LED kijelző\u003cbr\/\u003eA KEMOT PROSinus vészhelyzeti tápegységek világos LED kijelzővel vannak ellátva, amely a készülék aktuális működési állapotát mutatja. A kijelzőn többek között ellenőrizheti: a bemeneti feszültséget, a kimeneti feszültséget és a frekvenciát. Ezenkívül gyorsan ellenőrizheti a terhelési szintet és az akkumulátor töltöttségi szintjét.\u003cbr\/\u003e\u003cbr\/\u003eMűszaki adatok:\u003cbr\/\u003e\u003cbr\/\u003eNévleges teljesítmény: 1600 W\u003cbr\/\u003eAkkumulátor típusa: 12 V DC\u003cbr\/\u003eMaximális akkumulátor-feszültség: 15 V DC\u003cbr\/\u003eBemeneti feszültségtartomány: 190 - 260 V AC\u003cbr\/\u003eBemeneti frekvencia: 45 ~ 60 Hz\u003cbr\/\u003eKimeneti feszültségtartomány: 230 V AC +\/-5% \/ Inverter: 230 VAC +\/-3%\u003cbr\/\u003eKimeneti frekvencia: 50\/60 Hz +\/-0,5 Hz\u003cbr\/\u003eKimeneti feszültség alakja: tiszta szinuszos hullám\u003cbr\/\u003eKimeneti hatásfok: \u003e=85% (egyenáramból váltakozó áramra)\u003cbr\/\u003eAkkumulátor töltőáram: 20 A\u003cbr\/\u003eAkkumulátor kapacitás: 100 -. 400 Ah (ajánlott: 200 Ah)\u003cbr\/\u003eBecsült töltési idő: 4-14 óra (az akkumulátor kapacitásától függően)\u003cbr\/\u003eBekapcsolási idő: \u003c=4 ms\u003cbr\/\u003eVédelem: túlterhelés, rövidzárlat, túl magas vagy túl alacsony feszültség ellen.\u003cbr\/\u003eMegengedett üzemi hőmérséklet: 0-40 °C\u003cbr\/\u003eMegengedett páratartalom: 10-90%\u003cbr\/\u003eMéretek: 50x27x21 cm\u003cbr\/\u003eSúly: 14,95 kg\u003cbr\/\u003e","brand":"KEMOT","offers":[{"title":"Default Title","offer_id":53038824358226,"sku":"90329898","price":5899.0,"currency_code":"CZK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0954\/9624\/1490\/files\/90329898.jpg?v=1777020571"},{"product_id":"zdroj-zalozni-rebel-power-500-lfp4-12v-230v-500va-300w-black","title":"Power supply REBEL POWER-500-LFP4 12V 230V 500VA 300W Black","description":"Home emergency power\u003cbr\/\u003eThe role of Rebel emergency power systems is to protect equipment from power failure and, as a result, disruption or interruption of their operation.\u003cbr\/\u003e\u003cbr\/\u003eAre you wondering which UPS to choose for a gas boiler, or maybe you are interested in a UPS for an eco-pea or pellet stove? Rebel's POWER range is ideal as an emergency power supply for central heating pumps or pumps in fireplace installations, as well as induction motors, or for example installation automation equipment using heat convectors and any equipment that is extremely sensitive to the slightest changes in voltage shape. Their advantage is a clean sinusoidal course of the output voltage (supplying the load), thanks to which the device ensures stable operation, preventing the influence of overheating of inductive loads. Together with the 12V battery, it forms a complete power supply with a guarantee of 230 VAC.\u003cbr\/\u003e\u003cbr\/\u003eHome uninterruptible power supply - application\u003cbr\/\u003eEmergency power supply to furnaces\u003cbr\/\u003eRTV equipment (televisions, tuners, hi-fi, DVD)\u003cbr\/\u003eHome appliances (refrigerators, blenders)\u003cbr\/\u003ePower tools (drills, grinders)\u003cbr\/\u003ePower for chargers (smartphones, tablets, phones, laptops)\u003cbr\/\u003ePumps, compressors (water, heat, air conditioning)\u003cbr\/\u003eOffice equipment (faxes, computers, monitors)\u003cbr\/\u003e\u003cbr\/\u003eSafety guaranteed\u003cbr\/\u003eRebel backup power supplies are equipped with a number of protections, such as against overload, short circuit, and too high and too low voltage. The solutions used are the basis of security and your peace of mind!\u003cbr\/\u003e\u003cbr\/\u003eThree operating modes\u003cbr\/\u003eThe emergency power mode with charging function converts the 12V DC voltage supplied from the external battery to 230V AC voltage and charges the external battery. Charger mode charges an external battery. Converter mode converts 12V DC voltage from the battery to 230V AC voltage.\u003cbr\/\u003e\u003cbr\/\u003eConstant phase uninterruptible power supply\u003cbr\/\u003eThe Rebel backup power supply works with appliances equipped with phase detection, such as some models of gas furnaces. The phase in our device is in a fixed place, regardless of whether it is powered from a mains socket or from a battery.\u003cbr\/\u003e\u003cbr\/\u003eEmergency power supply for stove with battery\u003cbr\/\u003eThe basis for the proper functioning of the Rebel emergency power source is a correctly selected battery. To select a suitable device, use the approximate formula: 100 W load = 10 A consumption from the battery.\u003cbr\/\u003e\u003cbr\/\u003eA battery to power your home is not included.\u003cbr\/\u003e\u003cbr\/\u003eLiFePo4 emergency power supply\u003cbr\/\u003eThe BAT TYPE feature on the Rebel POWER-500-LFP4 power supply allows the cable kit to support both gel and lithium phosphate (LiFePo4) charging. This allows you to optimally adjust the charging parameters, which translates into a longer service life. LiFePo4 charges faster, allowing for faster full device operation with minimal downtime.\u003cbr\/\u003e\u003cbr\/\u003eLED display\u003cbr\/\u003eConvenient use of the uninterruptible Rebel source is guaranteed by a clear LED display. Thanks to it, you can easily read the current operating status of the device, check, among other things: input voltage, output voltage and frequency. In addition, you can quickly check the load level and battery level.\u003cbr\/\u003e\u003cbr\/\u003eTechnical parameters:\u003cbr\/\u003e\u003cbr\/\u003eRated power: 300 W\u003cbr\/\u003eBattery type: 12 V DC\u003cbr\/\u003eMaximum battery voltage: 15 V DC\u003cbr\/\u003eInput voltage range: 150 - 270 V AC\u003cbr\/\u003eInput frequency: 45 - 60 Hz\u003cbr\/\u003eOutput voltage range: 190 - 245 V AC +\/-8% \/ Inverter: 230 VAC +\/-3%\u003cbr\/\u003eOutput frequency: 50\/60 Hz +\/-0.5 Hz\u003cbr\/\u003eOutput voltage shape: Pure sine wave\u003cbr\/\u003eOutput efficiency: \u003e= 85% (DC to AC)\u003cbr\/\u003eBattery charging current: 10 A\u003cbr\/\u003eBattery capacity: Max. 50-200 Ah (recommended: 55 Ah)\u003cbr\/\u003eEstimated charging time: 4-14 hours (depending on battery capacity)\u003cbr\/\u003eSwitching time: =\u003c 4 ms\u003cbr\/\u003eProtection: Against overload, short circuit, too high or too low voltage\u003cbr\/\u003ePermissible operating temperature: 0 - 40°C\u003cbr\/\u003ePermissible humidity: 10 - 90%\u003cbr\/\u003eWeight: 3.95 kg\u003cbr\/\u003eDimensions: 138 x 226 x 155 mm","brand":"REBEL","offers":[{"title":"Default Title","offer_id":53044048003410,"sku":"08840384","price":1799.0,"currency_code":"CZK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0954\/9624\/1490\/files\/08840384_f5e8f262-5c0e-4981-a92b-196e8798a298.png?v=1776148593"},{"product_id":"zdroj-zalozni-rebel-power-800-lfp4-12v-230v-800va-500w-black","title":"Power supply REBEL POWER-800-LFP4 12V 230V 800VA 500W Black","description":"Home emergency power\u003cbr\/\u003eThe role of Rebel emergency power systems is to protect equipment from power failure and, as a result, disruption or interruption of their operation.\u003cbr\/\u003e\u003cbr\/\u003eAre you wondering which UPS to choose for a gas boiler, or maybe you are interested in a UPS for an eco-pea or pellet stove? Rebel's POWER range is ideal as an emergency power supply for central heating pumps or pumps in fireplace installations, as well as induction motors, or for example installation automation equipment using heat convectors and any equipment that is extremely sensitive to the slightest changes in voltage shape. Their advantage is a clean sinusoidal course of the output voltage (supplying the load), thanks to which the device ensures stable operation, preventing the influence of overheating of inductive loads. Together with the 12V battery, it forms a complete power supply with a guarantee of 230 VAC.\u003cbr\/\u003e\u003cbr\/\u003eHome uninterruptible power supply - application\u003cbr\/\u003eEmergency power supply to furnaces\u003cbr\/\u003eRTV equipment (televisions, tuners, hi-fi, DVD)\u003cbr\/\u003eHome appliances (refrigerators, blenders)\u003cbr\/\u003ePower tools (drills, grinders)\u003cbr\/\u003ePower for chargers (smartphones, tablets, phones, laptops)\u003cbr\/\u003ePumps, compressors (water, heat, air conditioning)\u003cbr\/\u003eOffice equipment (faxes, computers, monitors)\u003cbr\/\u003e\u003cbr\/\u003eSafety guaranteed\u003cbr\/\u003eRebel backup power supplies are equipped with a number of protections, such as against overload, short circuit, and too high and too low voltage. The solutions used are the basis of security and your peace of mind!\u003cbr\/\u003e\u003cbr\/\u003eThree operating modes\u003cbr\/\u003eThe emergency power mode with charging function converts the 12V DC voltage supplied from the external battery to 230V AC voltage and charges the external battery. Charger mode charges an external battery. Converter mode converts 12V DC voltage from the battery to 230V AC voltage.\u003cbr\/\u003e\u003cbr\/\u003eConstant phase uninterruptible power supply\u003cbr\/\u003eThe Rebel backup power supply works with appliances equipped with phase detection, such as some models of gas furnaces. The phase in our device is in a fixed place, regardless of whether it is powered from a mains socket or from a battery.\u003cbr\/\u003e\u003cbr\/\u003eEmergency power supply for stove with battery\u003cbr\/\u003eThe basis for the proper functioning of the Rebel emergency power source is a correctly selected battery. To select a suitable device, use the approximate formula: 100 W load = 10 A consumption from the battery.\u003cbr\/\u003e\u003cbr\/\u003eA battery to power your home is not included.\u003cbr\/\u003e\u003cbr\/\u003eLiFePo4 emergency power supply\u003cbr\/\u003eThe BAT TYPE feature on the Rebel POWER-800-LFP4 power supply allows the cable kit to support both gel and lithium phosphate (LiFePo4) charging. This allows you to optimally adjust the charging parameters, which translates into a longer service life. LiFePo4 charges faster, allowing for faster full device operation with minimal downtime.\u003cbr\/\u003e\u003cbr\/\u003eLED display\u003cbr\/\u003eConvenient use of the uninterruptible Rebel source is guaranteed by a clear LED display. Thanks to it, you can easily read the current operating status of the device, check, among other things: input voltage, output voltage and frequency. In addition, you can quickly check the load level and battery level.\u003cbr\/\u003e\u003cbr\/\u003eTechnical parameters:\u003cbr\/\u003e\u003cbr\/\u003eRated power: 500 W\u003cbr\/\u003eBattery type: 12 V DC\u003cbr\/\u003eMaximum battery voltage: 15 V DC\u003cbr\/\u003eInput voltage range: 150 - 270 V AC\u003cbr\/\u003eInput frequency: 45 - 60 Hz\u003cbr\/\u003eOutput voltage range: 190 - 245 V AC +\/-8% \/ Inverter: 230 VAC +\/-3%\u003cbr\/\u003eOutput frequency: 50\/60 Hz +\/-0.5 Hz\u003cbr\/\u003eOutput voltage shape: Pure sine wave\u003cbr\/\u003eOutput efficiency: \u003e= 85% (DC to AC)\u003cbr\/\u003eBattery charging current: 10 A\u003cbr\/\u003eBattery capacity: Max. 50-200 Ah (recommended: 55 Ah)\u003cbr\/\u003eEstimated charging time: 4-14 hours (depending on battery capacity)\u003cbr\/\u003eSwitching time: =\u003c 4 ms\u003cbr\/\u003eProtection: Against overload, short circuit, too high or too low voltage\u003cbr\/\u003ePermissible operating temperature: 0 - 40°C\u003cbr\/\u003ePermissible humidity: 10 - 90%\u003cbr\/\u003eWeight: 4.7 kg\u003cbr\/\u003eDimensions: 138 x 226 x 155 mm","brand":"REBEL","offers":[{"title":"Default Title","offer_id":53044048068946,"sku":"08840385","price":2250.0,"currency_code":"CZK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0954\/9624\/1490\/files\/08840385_20dbb033-e4e7-490e-a4c5-00868175e363.png?v=1776148594"},{"product_id":"zdroj-zalozni-geti-gep501-sinus-500w-nastenny-baterie-55ah","title":"Backup power GETI GEP501 sinus 500W Wall-mounted + baterie 55Ah","description":"The GETI emergency power supply system (EPS - Emergency Power Supply) is a device that provides a source of alternating voltage in the event of a power failure. You can use the Power Supply System (EPS) as a backup source for various pumps, automatic boilers, feeders, emergency lighting, camera systems and more. In normal mode, the connected device is powered directly from the network, and in the event of a failure, the emergency power system automatically switches to inverter mode. The connected device is then powered by the connected battery. If the power supply is not restored, the system (EPS) may switch off when the voltage of the connected battery drops to a value of around 10.2V ± 0.3V. This is to protect the battery from deep discharge and subsequent damage. The EPS is equipped with a clear colour display, a pure sine voltage converter based on a toroidal transformer and a fast 32-bit processor.\u003cbr\/\u003e\u003cbr\/\u003eWarning: the contacts of the connected battery must be properly protected against: contact with persons, foreign bodies, contact with other parts of the system or short circuits.\u003cbr\/\u003e\u003cbr\/\u003eProduct description:\u003cbr\/\u003e\u003cbr\/\u003e- inverter, UPS, AVR and charger in one device\u003cbr\/\u003e- clear LED colour display\u003cbr\/\u003e- high efficiency due to construction with toroidal transformer\u003cbr\/\u003e- high charging current\u003cbr\/\u003e- protection against overload, short circuit, overcharging and reverse polarity.\u003cbr\/\u003e\u003cbr\/\u003e\u003cbr\/\u003e\u003cbr\/\u003eTechnical parameters:\u003cbr\/\u003e\u003cbr\/\u003e- type of backup batteries: AGM, GEL\u003cbr\/\u003e- backup battery voltage: 12V DC\u003cbr\/\u003e- rated capacity: 800VA\u003cbr\/\u003e- rated power: 500W\u003cbr\/\u003e- transformer: toroid\u003cbr\/\u003e- input voltage: 230 V AC - 50Hz\u003cbr\/\u003e- output voltage: 220V AC ± 3% - 50Hz \/ pure sine wave\u003cbr\/\u003e- charging current: 10A\/ 15A\/ 20A optional\u003cbr\/\u003e- charging voltage: 13.6V ± 0.3V\u003cbr\/\u003e- low battery voltage limit: 10.9V ± 0.3V\u003cbr\/\u003e- battery low voltage protection point: 10.2V ± 0.3V\u003cbr\/\u003e- transfer time: \u003c 4 ms\u003cbr\/\u003e- cooling system: Yes\u003cbr\/\u003e- operating temperature: 0 ~ 40°C\u003cbr\/\u003e- relative humidity: 10% ~ 90%\u003cbr\/\u003e- storage temperature: -15°~ 45°C\u003cbr\/\u003e- cable length to battery: 2 x 75 cm, M8\u003cbr\/\u003e- dimension: 210x253x102 mm\u003cbr\/\u003e- weight: 4,5 kg\u003cbr\/\u003e\u003cbr\/\u003e\u003cbr\/\u003eThe GETI AGM lead-acid traction battery offers high performance for driving wheelchairs, electric bicycles, electric scooters, electric scooters and other mobile machines.\u003cbr\/\u003eIt is also suitable for solar and wind energy systems, for UPS, EPS systems, security technology, etc.\u003cbr\/\u003eIt is a maintenance-free, hermetically sealed accumulator, which enables any working position.\u003cbr\/\u003e\u003cbr\/\u003e\u003cbr\/\u003eTechnical parameters:\u003cbr\/\u003e \u003cbr\/\u003e- production technology: VRLA (valve regulated lead acid) - valve-controlled lead acid batteries\u003cbr\/\u003e- type: GEL\u003cbr\/\u003e- voltage: 12 V\u003cbr\/\u003e- capacity: 55 Ah (25°C)\u003cbr\/\u003e- number of cycles: ?600 Cycles @25? ( DoD 80% )\u003cbr\/\u003e- number of cycles: ?850 Cycles @25? ( DoD 50% )\u003cbr\/\u003e- discharge current recommended: 12A\u003cbr\/\u003e- charging current for standby mode: 13,75A max. (0.25C)\u003cbr\/\u003e- charging current for cyclic mode: 13,75A max. (0.25C)\u003cbr\/\u003e- charging voltage for standby mode: 2.25 - 2.30 V \/ cell at 25°C\u003cbr\/\u003e- charging voltage for cyclic mode: 2.40 - 2.45 V \/ cell at 25°C\u003cbr\/\u003e- charging method: CV\u003cbr\/\u003e- self-discharge level: less than 3% \/ month at 25°C\u003cbr\/\u003e- internal resistance (fully charged battery):  m?\u003cbr\/\u003e- connection terminals: M6\u003cbr\/\u003e- charging temperature: -20?~50?\u003cbr\/\u003e- discharge temperature: -40?~60?\u003cbr\/\u003e- storage temperature: -20?~60?\u003cbr\/\u003e- dimensions: 223 x 136 x 172 mm\u003cbr\/\u003e- total height (with end caps): 177 mm\u003cbr\/\u003e- weight: approx. 15.0 kg","brand":"GETI","offers":[{"title":"Default Title","offer_id":53044136378706,"sku":"04230659","price":4990.0,"currency_code":"CZK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0954\/9624\/1490\/files\/04230659.png?v=1776172693"},{"product_id":"zdroj-zalozni-kemot-prosinus-1000-lfp4-12v-230v-1000va-700w-black","title":"Backup power supply KEMOT PROsinus-1000-LFP4 12V 230V 1000VA 700W Black","description":"Home emergency power\u003cbr\/\u003eKEMOT emergency power systems protect selected equipment from power outages that may result in disruption or interruption of their operation.\u003cbr\/\u003e\u003cbr\/\u003eAre you wondering which UPS to choose for a gas boiler, or maybe you are interested in a UPS for an eco-pea or pellet stove? The KEMOT PROsinus range of devices is perfectly suited as an emergency source for central heating pumps or pumps in fireplace installations, as well as induction motors or, for example, devices for automating installations using heat convectors and all devices extremely sensitive to the slightest changes. in the form of voltage. Their advantage is a clean sinusoidal course of the output voltage (supplying the load), thanks to which the device ensures stable operation, preventing the influence of overheating of inductive loads. Together with the 12V battery, it forms a complete power supply with a guarantee of 230 VAC.\u003cbr\/\u003e\u003cbr\/\u003eHome uninterruptible power supply - application\u003cbr\/\u003eEmergency power supply to furnaces\u003cbr\/\u003eRTV equipment (televisions, tuners, hi-fi, DVD)\u003cbr\/\u003eHome appliances (refrigerators, blenders)\u003cbr\/\u003ePower tools (drills, grinders)\u003cbr\/\u003ePower for chargers (smartphones, tablets, phones, laptops)\u003cbr\/\u003ePumps, compressors (water, heat, air conditioning)\u003cbr\/\u003eOffice equipment (faxes, computers, monitors)\u003cbr\/\u003e\u003cbr\/\u003eSafe emergency power at home\u003cbr\/\u003eKEMOT emergency power supplies have protection against overload, short circuit and too high and too low voltage. Thanks to this, they guarantee safe work in your home.\u003cbr\/\u003e\u003cbr\/\u003eThree operating modes\u003cbr\/\u003eThe emergency power mode with charging function converts the 12V DC voltage supplied from the external battery to 230V AC voltage and charges the external battery. Charger mode charges an external battery. Converter mode converts 12V DC voltage from the battery to 230V AC voltage.\u003cbr\/\u003e\u003cbr\/\u003eConstant phase uninterruptible power supply\u003cbr\/\u003eThe KEMOT emergency power supply works with devices equipped with phase detection, such as some models of gas furnaces. The phase in our device is in a fixed place, regardless of whether it is powered from a mains socket or from a battery.\u003cbr\/\u003e\u003cbr\/\u003eReliability and security\u003cbr\/\u003eThe KEMOT PROsinus-1000-LFP4 backup power supply is equipped with a set of copper cables that guarantee efficient power flow, minimize losses and ensure fast charging. Their solid construction protects against overloads and overvoltages, thus protecting both the devices connected to the source and the source itself. The cables are easy to install and use, which increases the comfort of use and the reliability of the equipment operation at key moments.\u003cbr\/\u003e\u003cbr\/\u003eLiFePo4 emergency power supply\u003cbr\/\u003eThe BAT TYPE feature in the KEMOT PROsinus-1000-LFP4 power supply enables a cable kit that supports both gel and lithium phosphate (LiFePo4) charging. This allows you to optimally adjust the charging parameters, which translates into a longer service life. LiFePo4 charges faster, allowing for faster full device operation with minimal downtime.\u003cbr\/\u003e\u003cbr\/\u003eClear LED display\u003cbr\/\u003eKEMOT PROSinus emergency sources are equipped with a clear LED display that shows the current operating status of the device. On the display you can check, among other things: input voltage, output voltage and frequency. In addition, you can quickly check the load level and battery level.\u003cbr\/\u003e\u003cbr\/\u003eTechnical parameters:\u003cbr\/\u003e\u003cbr\/\u003eRated power: 700 W\u003cbr\/\u003eBattery type: 12 V DC\u003cbr\/\u003eMaximum battery voltage: 15 V DC\u003cbr\/\u003eInput voltage range: 190 - 260 V AC\u003cbr\/\u003eInput frequency: 45 - 60 Hz\u003cbr\/\u003eOutput voltage range: 190 - 245 V AC +\/-5% \/ Inverter: 230 VAC +\/-3%\u003cbr\/\u003eOutput frequency: 50\/60 Hz +\/-0.5 Hz\u003cbr\/\u003eOutput voltage shape: Pure sine wave\u003cbr\/\u003eOutput efficiency: \u003e= 85% (DC to AC)\u003cbr\/\u003eBattery charging current: 10 A\u003cbr\/\u003eBattery capacity: Max. 50-200 Ah (recommended: 55 Ah)\u003cbr\/\u003eEstimated charging time: 4-14 hours (depending on battery capacity)\u003cbr\/\u003eSwitching time: =\u003c 4 ms\u003cbr\/\u003eProtection: Against overload, short circuit, too high or too low voltage\u003cbr\/\u003ePermissible operating temperature: 0 - 40°C\u003cbr\/\u003ePermissible humidity: 10 - 90%\u003cbr\/\u003eWeight: 11.5 kg\u003cbr\/\u003eDimensions: 138 x 276 x 155 mm","brand":"KEMOT","offers":[{"title":"Default Title","offer_id":53044140179794,"sku":"08840389","price":3259.0,"currency_code":"CZK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0954\/9624\/1490\/files\/08840389.png?v=1776414927"},{"product_id":"zdroj-zalozni-geti-gep501-sinus-500w-nastenny-baterie-70ah","title":"Backup power GETI GEP501 sinus 500W Wall-mounted + baterie 70Ah","description":"The GETI emergency power supply system (EPS - Emergency Power Supply) is a device that provides a source of alternating voltage in the event of a power failure. You can use the Power Supply System (EPS) as a backup source for various pumps, automatic boilers, feeders, emergency lighting, camera systems and more. In normal mode, the connected device is powered directly from the network, and in the event of a failure, the emergency power system automatically switches to inverter mode. The connected device is then powered by the connected battery. If the power supply is not restored, the system (EPS) may switch off when the voltage of the connected battery drops to a value of around 10.2V ± 0.3V. This is to protect the battery from deep discharge and subsequent damage. The EPS is equipped with a clear colour display, a pure sine voltage converter based on a toroidal transformer and a fast 32-bit processor.\u003cbr\/\u003e\u003cbr\/\u003eWarning: the contacts of the connected battery must be properly protected against: contact with persons, foreign bodies, contact with other parts of the system or short circuits.\u003cbr\/\u003e\u003cbr\/\u003eProduct description:\u003cbr\/\u003e\u003cbr\/\u003e- inverter, UPS, AVR and charger in one device\u003cbr\/\u003e- clear LED colour display\u003cbr\/\u003e- high efficiency due to construction with toroidal transformer\u003cbr\/\u003e- high charging current\u003cbr\/\u003e- protection against overload, short circuit, overcharging and reverse polarity.\u003cbr\/\u003e\u003cbr\/\u003e\u003cbr\/\u003e\u003cbr\/\u003eTechnical parameters:\u003cbr\/\u003e\u003cbr\/\u003e- type of backup batteries: AGM, GEL\u003cbr\/\u003e- backup battery voltage: 12V DC\u003cbr\/\u003e- rated capacity: 800VA\u003cbr\/\u003e- rated power: 500W\u003cbr\/\u003e- transformer: toroid\u003cbr\/\u003e- input voltage: 230 V AC - 50Hz\u003cbr\/\u003e- output voltage: 220V AC ± 3% - 50Hz \/ pure sine wave\u003cbr\/\u003e- charging current: 10A\/ 15A\/ 20A optional\u003cbr\/\u003e- charging voltage: 13.6V ± 0.3V\u003cbr\/\u003e- low battery voltage limit: 10.9V ± 0.3V\u003cbr\/\u003e- battery low voltage protection point: 10.2V ± 0.3V\u003cbr\/\u003e- transfer time: \u003c 4 ms\u003cbr\/\u003e- cooling system: Yes\u003cbr\/\u003e- operating temperature: 0 ~ 40°C\u003cbr\/\u003e- relative humidity: 10% ~ 90%\u003cbr\/\u003e- storage temperature: -15°~ 45°C\u003cbr\/\u003e- cable length to battery: 2 x 75 cm, M8\u003cbr\/\u003e- dimension: 210x253x102 mm\u003cbr\/\u003e- weight: 4,5 kg\u003cbr\/\u003e\u003cbr\/\u003e\u003cbr\/\u003ePackaging: box 1pc \/ carton 2pc\u003cbr\/\u003eCarton weight: 8 kg\u003cbr\/\u003e\u003cbr\/\u003e\u003cbr\/\u003eThe GETI lead - acid battery is suitable for smaller solar systems and as a battery replacement for UPS backup systems, backup sources for all EZS, EPS and telecommunications applications, emergency lighting and rechargeable lamps, toys, control systems, alarms, alert mobile and signaling devices,\u003cbr\/\u003eIt is a maintenance-free, hermetically sealed battery, allowing any working position.\u003cbr\/\u003e \u003cbr\/\u003e\u003cbr\/\u003eTechnical parameters:\u003cbr\/\u003e \u003cbr\/\u003e- production technology: VRLA - valve regulated lead acid\u003cbr\/\u003e- type: AGM battery\u003cbr\/\u003e- voltage: 12 V\u003cbr\/\u003e- capacity: 70 Ah\u003cbr\/\u003e- dimensions: 259 x 168 x 211 mm\u003cbr\/\u003e- overall height (with terminals): 214 mm\u003cbr\/\u003e- connection (terminals): Screw M6\u003cbr\/\u003e- internal resistance (fully charged battery): 7,5 m?\u003cbr\/\u003e- self-discharge \u003c3%, 25 ° C\u003cbr\/\u003e- weight: approx. 21,5 kg\u003cbr\/\u003e \u003cbr\/\u003eNominal capacity (25 ° C)\u003cbr\/\u003e76,3Ah - applies at rated current of 3.815A for 20 hours\u003cbr\/\u003e71,4Ah - applies at rated load 7.14A for 10 hours\u003cbr\/\u003e\u003cbr\/\u003ePackaging: 1 pc of backup source GETI GEP500 + lead battery 70AH\u003cbr\/\u003eweight: 26kg","brand":"GETI","offers":[{"title":"Default Title","offer_id":53044239434066,"sku":"04230619","price":4800.0,"currency_code":"CZK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0954\/9624\/1490\/files\/04230619.png?v=1776172698"}],"url":"https:\/\/tipa.eu\/en-hu\/collections\/backup-power-supplies.oembed","provider":"TIPA","version":"1.0","type":"link"}