{"product_id":"multimetr-uni-t-ut622a","title":"Multimeter UNI-T UT622A","description":"This product comes with a 3-year warranty.\r\rThe UT622A LRC is a hand-held component meter - inductors, resistors and capacitors  and their secondary properties: D (loss factor), Q (quality factor), ? (phase angle in degrees), ? (phase angle in radians) and ESR (equivalent series or parallel resistance). The parameters of the components are measured by alternating voltage with a selectable frequency of 100, 120, 1000, 10000 Hz and a selectable amplitude of 0.1Vrms, 0.3Vrms, 1.0Vrms at the output impedance of the signal source 100?. The highest measurement accuracy is 0.1%.\u003cbr\/\u003eThe device has an intuitive TFT LCD display with a diagonal of 2.8 inches and adjustable backlight brightness in ten degrees, a built-in large-capacity Li-Pol battery 1800mAh and a miniUSB connector for charging and data transfer to a PC. The maximum value of the display when measuring primary parameters is 99999 and the minimum value when measuring secondary parameters is 0.0001. Measurement mode - one measurement triggered by a TRI button or a command from a PC; or continuous measurement with adjustable test start speed 20x \/ sec, 5x \/ sec, 2x \/ sec. Configuration of 2 + 1 or 4 + 1 terminals (after purchase of UTR-L100k-H test cables).\u003cbr\/\u003eDue to its technological sophistication, the device is also suitable for professional use - in conjunction with a computer (PC) it creates a station for sorting components according to specified parameters and is usable in production lines, laboratories, etc.\u003cbr\/\u003e\u003cbr\/\u003e \u003cbr\/\u003eProduct parameters :\u003cbr\/\u003e\u003cbr\/\u003e- manual RLC meter of primary and secondary parameters of components\u003cbr\/\u003e- large backlit, intuitive TFT LCD display, 10 levels of brightness\u003cbr\/\u003e- the display range is a maximum of 99999\u003cbr\/\u003e- maximum accuracy 0.1%\u003cbr\/\u003e- possibility to select components according to specified tolerance\u003cbr\/\u003e- measurement with alternating voltage 100, 120, 1000 or 10000 Hz\u003cbr\/\u003e- selectable amplitude measuring voltage 0.1Vrms, 0.3Vrms, 1.0Vrms\u003cbr\/\u003e- equivalent mode selection (for Z \u003c100? serial, for Z\u003e 10k? parallel)\u003cbr\/\u003e- automatic component identification\u003cbr\/\u003e- built-in large-capacity Li-Pol battery: \t\t\t1800 mAh\u003cbr\/\u003e- power supply + charging: \t\t\t\tDC adapter 5V ± 0.25V,\u003e 1A\u003cbr\/\u003e- operation on one battery charge: \t\t\ttypically 8 hours\u003cbr\/\u003e- functions in recording mode and data statistics: \t\tAVG, MAX, MIN\u003cbr\/\u003e- beep when buttons are pressed: \t\t\tyes, can be switched on \/ off\u003cbr\/\u003e- possibility to lock the buttons: \t\t\tyes\u003cbr\/\u003e- automatic shutdown: \t\t\t\tyes after 5, 15, 30, 60 minutes, or off\u003cbr\/\u003e- data interface: \t\t\t\t\tmini USB\u003cbr\/\u003e- data transfer rate to PC: \t\t\t\t9600\/19200\/38400 Baud\u003cbr\/\u003e- acoustic and optical alarm comparison of tolerance results: \toff, pass, fail\u003cbr\/\u003e- audible alarm selection: \t\t\t\tshort beep, long beep, two short beeps\u003cbr\/\u003e- open or short circuit tester reset: \t\t\tyes\u003cbr\/\u003e- setting of tolerance value from nominal: \t\t\t1% to 20%, default 5%\u003cbr\/\u003e- component counting: \t\t\t\tall, compliant, non-compliant\u003cbr\/\u003e\u003cbr\/\u003e\u003cbr\/\u003eTechnical parameters :\u003cbr\/\u003e\u003cbr\/\u003e- Range of measurement of primary impedance parameters:\u003cbr\/\u003etype \/\/ display range \/\/ minimum resolution on the range\u003cbr\/\u003einductance L \/\/ 0.001 µH to 9999.9 H \/\/ 1 \/ 0.1 \/ 0.01 \/ 0.001 µH\u003cbr\/\u003ecapacitance C \/\/ 0.001 pF to 99.999 mF \/\/ 1 \/ 0.1 \/ 0.01 \/ 0.001 pF\u003cbr\/\u003eresistance R \/\/ 0.0001 ? to 99.999 M? \/\/ 0.0001 ?\u003cbr\/\u003e     general impedance Z \/\/ 0.0001 ? to 99.999 M? \/\/ 0.0001 ?\u003cbr\/\u003e\u003cbr\/\u003e- Measurement range of secondary impedance parameters:\u003cbr\/\u003etype \/\/ display range \/\/ minimum resolution on the range\u003cbr\/\u003e                         loss factor D \/\/ 0.0001 to 9.9999 \/\/ 0.0001\u003cbr\/\u003e                           quality factor Q \/\/ 0.0001 to 99999 \/\/ 0.0001\u003cbr\/\u003ephase angle in degrees ? deg \/\/ -179.9 ° to 179.99 ° \/\/ 0.01 °\u003cbr\/\u003ephase angle in radians ? rad \/\/ -3.142 rad to 3.1416 rad \/\/ 0.001 rad\u003cbr\/\u003e             equivalent resistance ESR \/\/ 0.01 m? to 999.99 ? \/\/ 0.01 m?\u003cbr\/\u003e\u003cbr\/\u003e\u003cbr\/\u003e- display: \t\t\t\t\t\tbacklit TFT LCD display with a diagonal of 2.8 \"\u003cbr\/\u003e- display range: \t\t\t\t\tmaximum 99999\u003cbr\/\u003e- accuracy: \t\t\t\t\tbest 0.1%\u003cbr\/\u003e- selection of components according to the set tolerance: \tyes\u003cbr\/\u003e- voltage measurement: \t\t\t\tAC 100, 120, 1000 or 10000 Hz\u003cbr\/\u003e- amplitude measures. voltage: \t\t\t\t0.1 Vrms, 0.3 Vrms, 1.0 Vrms\u003cbr\/\u003e- data transfer to PC: \t\t\t\tyes, after installing the software to the PC\u003cbr\/\u003e- power supply: \t\t\t\t\tLi-Pol battery 1800mAh and (or) DC adapter 5V ± 0.25V,\u003e 1A\u003cbr\/\u003e- automatic charge management: \t\t\teven when the device is switched off\u003cbr\/\u003e- charging and data interface: \t\t\t\tmini USB\u003cbr\/\u003e- working environment: \t\t\t\ttemperature 5 to 35 ° C, humidity ?80% ° C\u003cbr\/\u003e- weight without batteries: \t\t\t\t305g\u003cbr\/\u003e- product dimensions (H x W x D): \t\t\t190 x 90 x 44 mm\u003cbr\/\u003e- package dimensions: \t\t\t\t225 x 220 x 63 mm\u003cbr\/\u003e- safety and EMC certification:\t\t\t\t IEC \/ EN61010-1: 2010, EN61326-2: 2013, EN61326-2-2: 2013\u003cbr\/\u003e\u003cbr\/\u003e\u003cbr\/\u003eContents of individual packaging :\u003cbr\/\u003e\u003cbr\/\u003e- device UT622A: \t\t\t\t\t1pc\u003cbr\/\u003e- USB interface cable: \t\t\t\t1pc\u003cbr\/\u003e- two-pole test cables with crocodile clips UTR-002: \t\t1pc\u003cbr\/\u003e- gold-plated shorting board UTR-001: \t\t\t1pc\u003cbr\/\u003e- instructions for use: \t\t\t\t1pc\u003cbr\/\u003e\u003cbr\/\u003e\u003cbr\/\u003eMANUFACTURER: UNI-TREND\u003cbr\/\u003ewww.uni-t.cz","brand":"UNI-T","offers":[{"title":"Default Title","offer_id":52554107126098,"sku":"07720290","price":199.04,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0954\/9624\/1490\/files\/07720290_00aa8856-c1ba-464f-a802-b2f373460f8e.png?v=1776146764","url":"https:\/\/tipa.eu\/en-en\/products\/multimeter-unit-ut622a-1","provider":"TIPA","version":"1.0","type":"link"}