{"title":"Bench power supplies","description":"\u003cp\u003eLaboratorní zdroj dodává nastavitelné stejnosměrné napětí s možností omezit proud. Díky tomu je nepostradatelný při vývoji a opravách elektroniky – při zkratu nebo chybě v zapojení zdroj proud omezí místo toho, aby se obvod zničil. Vícekanálové modely napájí souběžně analogovou i digitální část.\u003c\/p\u003e","products":[{"product_id":"zdroj-laboratorni-geti-glps-3003-0-30v-0-3a","title":"Laboratory power supply GETI GLPS 3003  0-30V\/ 0-3A","description":"This product comes with a 3-year warranty.\u003cbr\/\u003e\u003cbr\/\u003eLaboratory switching power supply of direct voltage and current with LCD display. The power supply is designed to supply various electronic devices, continuously regulates the output voltage and output current. It reliably maintains the set values ??regardless of supply voltage fluctuations or the connected load. The device is equipped with short-circuit protection so that in the event of an emergency, it is safe for the user and at the same time it is not destroyed. The power supply is suitable for work in laboratories and workshops, but also as a teaching aid in schools.\u003cbr\/\u003e\u003cbr\/\u003e\u003cbr\/\u003eProduct parameters:\u003cbr\/\u003e\u003cbr\/\u003e- single channel DC power supply\u003cbr\/\u003e- adjustable voltage and current\u003cbr\/\u003e- LCD display shows voltage and current values\u003cbr\/\u003e- backlit display\u003cbr\/\u003e- overload protection\u003cbr\/\u003e- pulse source\u003cbr\/\u003e\u003cbr\/\u003e\u003cbr\/\u003eTechnical parameters:\u003cbr\/\u003e\u003cbr\/\u003e- output voltage: 0-30 V DC\u003cbr\/\u003e- output current: 0-3 A\u003cbr\/\u003e- ripple and noise: CV \u003c200mVp-p\u003cbr\/\u003e- current protection\u003cbr\/\u003e- operating temperature 0 °C - 40 °C\u003cbr\/\u003e- humidity less RH 80%\u003cbr\/\u003e- supply voltage: 230 V AC \/ 50Hz\u003cbr\/\u003e- dimensions: 85 x 160 x 205mm\u003cbr\/\u003e- weight: 1,4kg","brand":"GETI","offers":[{"title":"Default Title","offer_id":52541786947922,"sku":"04220112","price":1690.0,"currency_code":"CZK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0954\/9624\/1490\/files\/04220112_25178fc3-132c-4d57-98aa-94171036abcd.png?v=1776145651"},{"product_id":"zdroj-laboratorni-geti-glps-3020-0-30v-0-20a","title":"Laboratory power supply GETI GLPS 3020  0-30V\/ 0-20A","description":"This product comes with a 3-year warranty.\u003cbr\/\u003e\u003cbr\/\u003eThe Geti laboratory power supply is intended for powering various electronic devices. It continuously regulates the output voltage and output current. It reliably maintains the set values ??regardless of supply voltage fluctuations or the connected load. The output voltage is adjustable in the range 0V - 30V and the output current is adjustable 0A - 20A. The device is equipped with short-circuit protection so that in the event of an emergency it is safe for the user and at the same time it is not destroyed.\u003cbr\/\u003eThe power supply is suitable for work in laboratories and workshops, but also as a teaching aid in schools.\u003cbr\/\u003e\u003cbr\/\u003e\u003cbr\/\u003eProduct parameters:\u003cbr\/\u003e\u003cbr\/\u003e- single channel DC power supply\u003cbr\/\u003e- adjustable voltage and current\u003cbr\/\u003e- Backlit 3-digit LCD display\u003cbr\/\u003e- quality and compact design\u003cbr\/\u003e- overload protection\u003cbr\/\u003e\u003cbr\/\u003e\u003cbr\/\u003eTechnical parameters:\u003cbr\/\u003e\u003cbr\/\u003e- output voltage 0-30 V continuously adjustable\u003cbr\/\u003e- output current 0-20 A continuously adjustable\u003cbr\/\u003e- ripple and noise: CV \u003c= 100mVpp\u003cbr\/\u003e- voltage measurement: 3 digit LCD display ± 0.2%\u003cbr\/\u003e- current measurement: 3 digit LCD display ± 0.2%\u003cbr\/\u003e- power supply: 230 V AC, 50 Hz\u003cbr\/\u003e- dimensions: 336 x 87 x 214 mm\u003cbr\/\u003e- weight: 2,7 kg\u003cbr\/\u003e\u003cbr\/\u003e\u003cbr\/\u003e","brand":"GETI","offers":[{"title":"Default Title","offer_id":52541799924050,"sku":"04220125","price":5690.0,"currency_code":"CZK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0954\/9624\/1490\/files\/04220125_deec2c42-8ffa-4ce5-be12-4b372ad26d17.png?v=1776145624"},{"product_id":"zdroj-laboratorni-uni-t-utp1303","title":"DC Power Supply UNI-T UTP1303","description":"This product comes with a 3-year warranty.\u003cbr\/\u003e\u003cbr\/\u003eUNI-T UTP1303 - single channel DC power supply\u003cbr\/\u003e\u003cbr\/\u003eSPECIFICATION\u003cbr\/\u003eOutput Voltage 0-32V\u003cbr\/\u003eOutput Current 0-3A\u003cbr\/\u003eLoad Regulation:\u003cbr\/\u003eVoltage \u003c=0.01%3mV\u003cbr\/\u003eCurrent \u003c=0.2%+3mA\u003cbr\/\u003eLine Regulation:\u003cbr\/\u003eVoltage \u003c=0.01%+3mV\u003cbr\/\u003eCurrent \u003c=0.1%+3mA\u003cbr\/\u003eRippple and Noise\u003cbr\/\u003eVoltage 1mV rms\u003cbr\/\u003eCurrent 3mA rms\u003cbr\/\u003eDisplay Accuracy \u003c=±(1%+2)\u003cbr\/\u003eReliability (MTBF) \u003e=2000 hours\u003cbr\/\u003eDiplay LED\u003cbr\/\u003e\u003cbr\/\u003eGENERAL CHARACTERISTICS\u003cbr\/\u003ePower: 115\/230V AC, 50-60Hz\u003cbr\/\u003eWeight: 5kg\u003cbr\/\u003eProduct Size: 145x175x284mm\u003cbr\/\u003e\u003cbr\/\u003eACCESSORIES: \u003cbr\/\u003ePower Cord","brand":"UNI-T","offers":[{"title":"Default Title","offer_id":52541833871698,"sku":"04220151","price":2459.0,"currency_code":"CZK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0954\/9624\/1490\/files\/04220151_574344e9-f3a1-4146-ad53-2f858124b296.png?v=1787842119"},{"product_id":"zdroj-laboratorni-geti-glps-3005-0-30v-0-5a","title":"Laboratory power supply GETI GLPS 3005 0-30V\/ 0-5A","description":"This product comes with a 3-year warranty.\u003cbr\/\u003e\u003cbr\/\u003eThe Geti laboratory power supply for powering various electronic devices continuously regulates the output voltage and output current. It reliably maintains the set values regardless of supply voltage fluctuations or the connected load. The device is equipped with short-circuit protection so that in the event of an emergency, it is safe for the user and at the same time it is not destroyed. The power supply is suitable for work in laboratories and workshops, but also as a teaching aid in schools.\u003cbr\/\u003e\u003cbr\/\u003e\u003cbr\/\u003eProduct parameters:\u003cbr\/\u003e\u003cbr\/\u003e- single channel DC power supply\u003cbr\/\u003e- adjustable voltage and current\u003cbr\/\u003e- backlit display\u003cbr\/\u003e- quality workmanship\u003cbr\/\u003e- current protection\u003cbr\/\u003e- pulse source\u003cbr\/\u003e\u003cbr\/\u003e\u003cbr\/\u003eTechnical parameters:\u003cbr\/\u003e\u003cbr\/\u003e- output voltage 0-30 V adjustable\u003cbr\/\u003e- output current 0-5 A adjustable\u003cbr\/\u003e- ripple and noise: CV \u003c200mVp-p\u003cbr\/\u003e- power supply: 230 V AC\u003cbr\/\u003e- weight: 1,6 kg\u003cbr\/\u003e- operating temperature 0 °C - 40 °C\u003cbr\/\u003e- dimensions: 85 x 160 x 205 mm\u003cbr\/\u003e","brand":"GETI","offers":[{"title":"Default Title","offer_id":52541872996690,"sku":"04220164","price":1990.0,"currency_code":"CZK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0954\/9624\/1490\/files\/04220164_c05ed90d-8301-434a-8390-701242986774.png?v=1776145600"},{"product_id":"zdroj-laboratorni-geti-glps-3003e-2x0-30v-0-3a-5v-3a","title":"Laboratory power supply GETI GLPS 3003E  2x0-30V\/ 0-3A+ (5V-3A)","description":"This product comes with a 3-year warranty.\u003cbr\/\u003e\u003cbr\/\u003eGeti laboratory power supply for powering various electronic devices. It continuously regulates the output voltage and output current. It reliably maintains the set values ??regardless of supply voltage fluctuations or the connected load. The device is designed to have high stability and power supply. The device is equipped with short-circuit protection so that in the event of an emergency it is safe for the user and at the same time it is not destroyed. The device has compact dimensions and excellent performance. All this combined with an elegant design. The power supply is suitable for work in research, laboratories and workshops, but also as a teaching aid in schools.\u003cbr\/\u003e\u003cbr\/\u003e\u003cbr\/\u003eProduct parameters:\u003cbr\/\u003e\u003cbr\/\u003e- two output adjustable channels + third fixed channel 5V \/ 3A\u003cbr\/\u003e- current limit protection\u003cbr\/\u003e- constant voltage and current mode\u003cbr\/\u003e- low ripple and noise, low drift\u003cbr\/\u003e- preset current limit\u003cbr\/\u003e- possibility to connect two channels in series or in parallel using a switch\u003cbr\/\u003e\u003cbr\/\u003e\u003cbr\/\u003eTechnical parameters:\u003cbr\/\u003e\u003cbr\/\u003e- output voltage: 0-30 V continuously adjustable\u003cbr\/\u003e- output current: 0-3 A continuously adjustable\u003cbr\/\u003e- source regulation: CV \u003c0.01% + 3mV, CC \u003c0.01% + 6mA\u003cbr\/\u003e- regulation in load: CV \u003c0.01% + 2mV, CV \u003c0.01% + 5mV, CC \u003c0.01% + 6mA\u003cbr\/\u003e- ripple and noise: CV \u003c1mV\u003cbr\/\u003e- power supply: 230 V AC, 50 Hz\u003cbr\/\u003e- working temperature 0 °C - 40 °C\u003cbr\/\u003e- dimensions: 262 x 163 x 360 mm\u003cbr\/\u003e- weight: 7 kg","brand":"GETI","offers":[{"title":"Default Title","offer_id":52541873357138,"sku":"04220166","price":4290.0,"currency_code":"CZK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0954\/9624\/1490\/files\/04220166_a1c8e289-7e3e-4a16-b78a-406f2cc13e60.png?v=1776145603"},{"product_id":"zdroj-laboratorni-geti-glps-3005e-2x0-30v-0-5a-5v-3a","title":"Laboratory power supply GETI GLPS 3005E 2x0-30V\/ 0-5A+ (5V-3A)","description":"This product comes with a 3-year warranty.\u003cbr\/\u003e\u003cbr\/\u003eThe Geti laboratory power supply is intended for powering various electronic devices. Continuously regulate output voltage and output current. They reliably maintain the set values ??regardless of supply voltage fluctuations or the connected load. The device is equipped with short-circuit protection so that in the event of an emergency, everything is safe for the user and at the same time it is not destroyed. The device is designed to have high stability and power supply. In the constant voltage mode, the voltage can be freely set in the range of 0V up to the maximum nominal value. In constant current mode, the current can be set from 0A up to the maximum nominal value. These two outputs can be connected in parallel or in series. The value of 5V is fixed at the third output - the output has good stability and is protected against overload. The power supply is suitable for professionals and amateurs, at home and at work, in production, laboratories and workshops, but also as a teaching aid in schools. The device has compact dimensions and elegant design.\u003cbr\/\u003e\u003cbr\/\u003e\u003cbr\/\u003eProduct parameters:\u003cbr\/\u003e\u003cbr\/\u003e- two output channels + third fixed channel 5V \/ 3A\u003cbr\/\u003e- independent use of two outputs\u003cbr\/\u003e- protection against current overload, short circuit\u003cbr\/\u003e- constant voltage and current mode\u003cbr\/\u003e- low ripple and noise, low drift\u003cbr\/\u003e- preset current limit\u003cbr\/\u003e- possibility to connect two channels in series or in parallel using a switch\u003cbr\/\u003e\u003cbr\/\u003e\u003cbr\/\u003eTechnical Specifications:\u003cbr\/\u003e\u003cbr\/\u003e- output voltage: 0-30V continuously adjustable\u003cbr\/\u003e- output current: 0-5A continuously adjustable\u003cbr\/\u003e- source regulation: CV \u003c0.01% + 3mV, CC \u003c0.01% + 6mA\u003cbr\/\u003e- load regulation: CV \u003c0.01% + 2mV, CV \u003c0.01% + 5mV + 6mA, CC \u003c0.01% + 6mA\u003cbr\/\u003e- ripple and noise: CV \u003c1mV\u003cbr\/\u003e- power supply: 230V AC, 50Hz, transformer\u003cbr\/\u003e- dimensions: 262x163x360mm\u003cbr\/\u003e- working temperature 0 ° C - 40 ° C\u003cbr\/\u003e- weight: 10kg","brand":"GETI","offers":[{"title":"Default Title","offer_id":52541873520978,"sku":"04220167","price":5590.0,"currency_code":"CZK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0954\/9624\/1490\/files\/04220167_4af7ede0-15f6-4997-94cb-fa2454ebb4a5.png?v=1776145605"},{"product_id":"zdroj-laboratorni-geti-glps-3010-0-30v-0-10a","title":"Laboratory power supply GETI GLPS 3010  0-30V\/ 0-10A","description":"This product comes with a 3-year warranty.\u003cbr\/\u003e\u003cbr\/\u003eThe Geti laboratory power supply is intended for powering various electronic devices. It continuously regulates the output voltage and output current. It reliably maintains the set values ??regardless of supply voltage fluctuations or the connected load. The output voltage is adjustable in the range 0V - 30V and the output current is adjustable 0A - 10A. The device is equipped with short-circuit protection so that in the event of an emergency it is safe for the user and at the same time it is not destroyed.\u003cbr\/\u003eThe power supply is suitable for work in laboratories and workshops, but also as a teaching aid in schools.\u003cbr\/\u003e\u003cbr\/\u003e\u003cbr\/\u003eProduct parameters:\u003cbr\/\u003e\u003cbr\/\u003e- single channel DC power supply\u003cbr\/\u003e- adjustable voltage and current\u003cbr\/\u003e- backlit display\u003cbr\/\u003e- quality and compact design\u003cbr\/\u003e- overload protection\u003cbr\/\u003e\u003cbr\/\u003e\u003cbr\/\u003eTechnical parameters:\u003cbr\/\u003e\u003cbr\/\u003e- output voltage 0-30 V continuously adjustable\u003cbr\/\u003e- output current 0-10 A continuously adjustable\u003cbr\/\u003e- ripple and noise: CV \u003c200mVp-p\u003cbr\/\u003e- power supply: 230 V AC, 50Hz\u003cbr\/\u003e- working temperature 0 °C - 40 °C\u003cbr\/\u003e- weight: 1,8 kg\u003cbr\/\u003e- dimensions: 85 x 160 x 205 mm\u003cbr\/\u003e","brand":"GETI","offers":[{"title":"Default Title","offer_id":52541890527570,"sku":"04220168","price":2690.0,"currency_code":"CZK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0954\/9624\/1490\/files\/04220168_a15152bc-3b63-4366-b4bc-2a4f4f72539a.png?v=1776145701"},{"product_id":"zdroj-laboratorni-uni-t-udp1306c","title":"DC Power Supply UNI-T UDP1306C","description":"The UDP1306C Programmable DC Power Supply is a cost-effective, branded laboratory power supply with one main output channel and a USB charging channel. It is a basic power supply product for users who need a smaller size power supply with high reliability. Compared to higher types (multi-channel) of UDP sources, this source allows a greater load of one channel, up to 6A at a voltage of 32V.\u003cbr\/\u003eThe source contains a classic linear transformer and enables work in the setting mode of constant output voltage (CV) in the range of 0 to 32V or in constant output current (CC) mode of 0 to 6A. In addition, there is a USB connector on the front panel, which can be used to charge, for example, a mobile phone with a voltage of 5V and a current of up to 3A.\u003cbr\/\u003eThe laboratory power supply has an EBTN display with three high-precision indicators that simultaneously display voltage, current and power with an accuracy of 4 digits.\u003cbr\/\u003eThe source has programmable parameters. It has 5 memories for easy storage and recall of set modes, and a button lock to prevent unwanted parameter changes. On the back side of the source housing are the USB-Device and RS232 connectors and the DIGITAL I\/O interface for remote control of the source. Using the supplied software, it is possible to record and display in real time on the connected PC in an Excel table or in a graph, the consumption or charging characteristics of the connected load, and based on SCPI communication commands it can communicate with the computer.\u003cbr\/\u003eRegular calibrations can be performed by software.\u003cbr\/\u003eThe source contains a temperature-controlled fan, long-term temperature overload of the transformer of the laboratory source is monitored by sensors that turn the source off when the limit value is reached and turn it on again after cooling down.\u003cbr\/\u003e\u003cbr\/\u003e\u003cbr\/\u003eProduct parameters :\u003cbr\/\u003e\u003cbr\/\u003e- fine software adjustment of output voltage and current\u003cbr\/\u003e- three four-digit displays for immediate control of voltage, current and power\u003cbr\/\u003e- voltage setting from 0 to 32V with a resolution of 10mV\u003cbr\/\u003e- current setting 0 to 6A with a resolution of 1mA\u003cbr\/\u003e- operation of the source in constant voltage (CV) or constant current (CC) mode\u003cbr\/\u003e- overvoltage protection (OVP), overcurrent protection (OCP), temperature protection (OTP)\u003cbr\/\u003e- a channel for charging e.g. a mobile phone on the USB connector on the front panel\u003cbr\/\u003e- USB-Device interface, RS232, DIGITAL I\/O on the rear panel\u003cbr\/\u003e- built-in buzzer to indicate change of states\u003cbr\/\u003e- locking buttons to prevent unwanted parameter changes\u003cbr\/\u003e- temperature-controlled intelligent cooling fan\u003cbr\/\u003e- disconnection from the power supply in case of thermal overload of the transformer\u003cbr\/\u003e- on the back, input voltage selector 110V\/120V\/220V\/230V (AC 50\/60Hz)\u003cbr\/\u003e\u003cbr\/\u003e\u003cbr\/\u003eTechnical parameters :\u003cbr\/\u003e\u003cbr\/\u003e- nominal output voltage: \t\t\t\t0 to 32V\u003cbr\/\u003e- rated output current: \t\t\t\t0 to 6A\u003cbr\/\u003e- total nominal output power: \t\t\t\tapprox. 192W\u003cbr\/\u003e- voltage\/current setting resolution: \t\t\t10mV\/1mA\u003cbr\/\u003e- accuracy of voltage setting in mode (CV): \t\t? (0.01% of measured value +3mV)\u003cbr\/\u003e- current setting accuracy in (CC) mode: \t\t\t? (0.1% of measured value +3mA)\u003cbr\/\u003e- noise and hum (5Hz to 20MHz) on the main output: \t?2mV RMS \/ ?3mA RMS\u003cbr\/\u003e- nominal voltage\/current protection on the USB output: \t5V ± 5%\/3A\u003cbr\/\u003e- temperature coefficient of voltage\/\/current: \t\t? 300ppm\/°C \/\/ ? 300ppm\/°C\u003cbr\/\u003e- rated supply voltage: \t\t\t\tAC 110V\/120V\/220V\/230V \/ (50\/60Hz)\u003cbr\/\u003e- protection (at 110\/120V\/AC power supply): \t\ttube fuse type: T6.3AL\/250V (20x5mm)\u003cbr\/\u003e- protection (with 220\/230\/AC power supply): \t\ttube fuse type: T3,13AL\/250V (20x5mm)\u003cbr\/\u003e- dimensions (width x height x depth): \t\t\t136 x 194 x 327mm\u003cbr\/\u003e- weight: \t\t\t\t\t\tapprox. 7.5 kg\u003cbr\/\u003e\u003cbr\/\u003e\u003cbr\/\u003eContents of individual packaging :\u003cbr\/\u003e\u003cbr\/\u003e- laboratory source UDP1306C: \t\t\t\t1pc\u003cbr\/\u003e- power cable: \t\t\t\t\t1 pc\u003cbr\/\u003e- interface cable USB-A – USB-B (UT-D14): \t\t1 pc\u003cbr\/\u003e- set of connection cables with alligator clips: \t\t1 set\u003cbr\/\u003e- spare fuses: \t\t\t\t\t1 pc\u003cbr\/\u003e- instructions for use: \t\t\t\t1 pc\u003cbr\/\u003e- on order RS232 communication cable: \t\t\t1 pc\u003cbr\/\u003e\u003cbr\/\u003e\u003cbr\/\u003ePackaging for bulk customers :\u003cbr\/\u003e\u003cbr\/\u003e- standard quantity per carton: \t\t\t\t1 pc\u003cbr\/\u003e- standard carton dimensions: \t\t\t\t505 x 270 x 335 mm\u003cbr\/\u003e- gross weight of the carton: \t\t\t\t9.6 kg\u003cbr\/\u003e\u003cbr\/\u003eMANUFACTURER: UNI-T\u003cbr\/\u003ewww.uni-t.cz\u003cbr\/\u003e\u003cbr\/\u003e\u003cbr\/\u003ePC link software download link:\u003cbr\/\u003ehttps:\/\/instruments.uni-trend.com\/EU-EN\/powersupplies\/udp1306c.html\u003cbr\/\u003e","brand":"UNI-T","offers":[{"title":"Default Title","offer_id":52553967075666,"sku":"04220231","price":5650.0,"currency_code":"CZK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0954\/9624\/1490\/files\/04220231_79b6ba86-e15e-4b9c-b574-53a22af254cb.png?v=1787842127"},{"product_id":"zdroj-laboratorni-uni-t-utp3305-ii","title":"DC Power Supply UNI-T UTP3305-II","description":"This product comes with a 3-year warranty.\u003cbr\/\u003e\u003cbr\/\u003eThe UTP3305-II laboratory power supplies are branded power supplies with three independent channels from the UNI-T manufacturer. The sources contain a classic linear transformer and in channels CH1, CH2 they allow operation in the mode of setting the constant output voltage in the range of 0 to 32V or in the mode of constant output current 0 to 5A. Channel CH3 provides a constant voltage of 5V at the output and has overload protection when current consumption 3A is reached. Channels CH1 and CH2 can operate independently of each other, or they can be internally connected in series or in parallel, then supply voltages from 0 to 64V \/ 0 to 5A or 0 to 32V \/ 10A. The laboratory power supplies have four LED displays that display voltages and currents simultaneously, with an accuracy of 4 locations in each of the CH1 and CH2 channels. The source contains a temperature-controlled fan, long-term thermal overload of the transformer of the laboratory source is monitored by a sensor, which switches off the source when the limit value is reached and switches it on again after cooling. The device is CE certified.\u003cbr\/\u003e\u003cbr\/\u003e\u003cbr\/\u003eProduct parameters :\u003cbr\/\u003e\u003cbr\/\u003e- setting currents and voltages with fine multi-turn potentiometers\u003cbr\/\u003e- four four-digit LED displays for immediate control of voltages and currents in channels CH1 and CH2\u003cbr\/\u003e- voltage setting 0 to 32V with a resolution of 10mV\u003cbr\/\u003e- current setting 0 to 5A with a resolution of 1mA\u003cbr\/\u003e- operation of channels CH1 and CH2 in voltage constant, constant current modes\u003cbr\/\u003e- possibility of internal connection of channels CH1 and CH2 in series or in parallel\u003cbr\/\u003e- channel CH3 with fixed voltage 5V, max. 3A\u003cbr\/\u003e- temperature controlled cooling fan\u003cbr\/\u003e- disconnection from the power supply when the transformer is thermally overloaded\u003cbr\/\u003e- input voltage selector 110V \/ 120V \/ 220V \/ 230V (AC 50 \/ 60Hz) on the back\u003cbr\/\u003e\u003cbr\/\u003e\u003cbr\/\u003eTechnical parameters :\u003cbr\/\u003e\u003cbr\/\u003e- rated output voltage CH1 and CH2: \t\t\t0 to 32V\u003cbr\/\u003e- rated output current CH1 and CH2: \t\t\t0 to 5A\u003cbr\/\u003e- rated output voltage \/ current CH3: \t\t\t5V \/ max. 3A\u003cbr\/\u003e- total rated output power: \t\t\t\t335W\u003cbr\/\u003e- voltage \/ current setting resolution: \t\t\t10mV \/ 1mA\u003cbr\/\u003e- voltage setting accuracy: \t\t\t\t± (0.1% of measured value + 30mV)\u003cbr\/\u003e- current setting accuracy: \t\t\t\t± (0.3% of measured value + 10mA)\u003cbr\/\u003e- ripple and noise (20Hz to 20MHz) at outputs CH1 and CH2: \t?1mV RMS \/ ?3mA RMS\u003cbr\/\u003e- ripple and noise at output CH3: \t\t\t?2mV\u003cbr\/\u003e- temperature coefficient: \t\t\t\tvoltage ?300ppm \/ ° C \/\/ current ?300ppm \/ ° C\u003cbr\/\u003e- recovery time: \t\t\t\t\t\u003c100µs (load fluctuation: 50%, minimum load: 0.5A)\u003cbr\/\u003e- rated supply voltage: \t\t\t\tAC 110V \/ 120V \/ 220V \/ 230V \/ (50 \/ 60Hz)\u003cbr\/\u003e- protection by tubular fuse type: \t\t\tF10AL250V (when supplying 110 \/ 120V AC), F5AL250V (when supplying 220 \/ 230V AC)\u003cbr\/\u003e- power consumption: \t\t\t\t700W\u003cbr\/\u003e- dimensions: \t\t\t\t\t319 x 146 x 226mm\u003cbr\/\u003e- weight: \t\t\t\t\t\t10.5kg\u003cbr\/\u003e\u003cbr\/\u003e\u003cbr\/\u003ePackage contents:\u003cbr\/\u003e\u003cbr\/\u003e- laboratory power supply UTP3305-II\u003cbr\/\u003e- power cable\u003cbr\/\u003e- spare fuses\u003cbr\/\u003e- crocodile clips\u003cbr\/\u003e- user manual\u003cbr\/\u003e\u003cbr\/\u003eMANUFACTURER: UNI-TREND","brand":"UNI-T","offers":[{"title":"Default Title","offer_id":52554317562194,"sku":"04220237","price":5790.0,"currency_code":"CZK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0954\/9624\/1490\/files\/04220237.png?v=1787842132"},{"product_id":"zdroj-laboratorni-uni-t-utp3315tfl-ii","title":"DC Power Supply UNI-T UTP3315TFL-II","description":"This product comes with a 3-year warranty.\u003cbr\/\u003e\u003cbr\/\u003eUTP3315TFL-II is a linear DC power supply with a classic transformer. Maximum voltage 30V DC, max. Current 5A DC. This type of power supply is an ideal tool for university and technical schools, electronics production lines, home appliances repairers, do-it-yourselfers etc.\u003cbr\/\u003e\u003cbr\/\u003eTwo 4-digit LED displays for simultaneous display of voltage (red) and current (white), reverse polarity protection, short-circuit protection, overload protection. When the internal temperature of the transformer reaches 130 ° C, the reversible thermal fuse cuts off the transformer power supply and automatically reconnects the power supply when the temperature drops. The device can be operated as a constant voltage source or as a constant current source. Coarse and fine voltage regulation with a resolution of 10mV, coarse and fine regulation of current limitation with a resolution of 1mA. Terminals +, - are galvanically separated from the source housing and the ground conductor, if necessary, one pole can be connected to the ground terminal. The maximum ripple (noise) of the DC voltage is 2mV rms and 3mA rms.\u003cbr\/\u003e\u003cbr\/\u003eProduct parameters :\u003cbr\/\u003e \u003cbr\/\u003e-  number of digits on the LED display : 4-digits\u003cbr\/\u003e-  two displays\u003cbr\/\u003e\u003cbr\/\u003eTechnical parameters :\u003cbr\/\u003e\u003cbr\/\u003e\u003cbr\/\u003e-  output voltage range : DC 0 - 30 V\u003cbr\/\u003e-  output current range : 0 - 5A\u003cbr\/\u003e-  max output power : 150 W\u003cbr\/\u003e-  number of digits on the red LED voltage display : 4\u003cbr\/\u003e-  number of digits on white LED current display : 4\u003cbr\/\u003e-  load control mode : CV \u003c0.01% + 5 mV\u003cbr\/\u003e-  load control mode : CC \u003c0.1% + 10 mA\u003cbr\/\u003e-  accuracy (25 ? ± 5 ?) voltage display : \u003c 0.5% + 20 mV\u003cbr\/\u003e-  current display accuracy (25 ? ± 5 ?) : \u003c 0.5% + 10 mA\u003cbr\/\u003e-  CV output control resolution : 10mV (typical)\u003cbr\/\u003e-  CC output control resolution : 1mA (typical)\u003cbr\/\u003e-  ripple and noise : ?2mVrms, 3mA rms\u003cbr\/\u003e-  product color : white and gray\u003cbr\/\u003e-  weight : 4 kg\u003cbr\/\u003e-  dimensions : 105 x 165 x 249 mm\u003cbr\/\u003e-  power supply : AC 110V \/ 230V ± 5% 50 \/ 60Hz\u003cbr\/\u003e-  detachable three-wire power cable\u003cbr\/\u003e-  standard accessories : output cables\u003cbr\/\u003e-  packing : 1 pc\u003cbr\/\u003e-  standard quantity in carton : 4pcs","brand":"UNI-T","offers":[{"title":"Default Title","offer_id":52554721657170,"sku":"04220213","price":2450.0,"currency_code":"CZK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0954\/9624\/1490\/files\/04220213_1a38b472-5d3f-49f4-86e9-c5b80bababa2.png?v=1787842123"},{"product_id":"zdroj-laboratorni-uni-t-udp3305c","title":"DC Power Supply UNI-T UDP3305C","description":"The UDP3305C Programmable DC Power Supply is a cost-effective, branded laboratory power supply with four independent channels from UNI-T. The source contains a classic linear transformer and in channels CH1, CH2 enables work in the setting mode of constant output voltage (CV) in the range of 0 to 30V or in constant output current (CC) mode of 0 to 5A. Channel CH3 provides a constant voltage at the output with the possibility of selecting a level of 1.8V; 2.5V; 3.3V or 5.0V and has overload protection when reaching 3.2A current draw. In addition, there is a USB connector on the front panel, which serves as the CH4 channel and can be used to charge, for example, a mobile phone with a voltage of 5V\/2A.\u003cbr\/\u003eChannels CH1 and CH2 can work independently, or they can be connected internally in series or in parallel, then the source supplies a voltage of 0 to 60V\/0 to 5A or 0 to 30V\/10A.\u003cbr\/\u003eThe laboratory power supply has an EBTN display with 6 high-precision indicators that simultaneously display voltages, currents and powers in each of both channels CH1 and CH2 with an accuracy of 4 places.\u003cbr\/\u003eThe source has programmable parameters. It has 5 memories for easy storage and recall of set modes, and a button lock to prevent unwanted parameter changes. On the back side of the source housing are the USB-Device and RS232 connectors and the DIGITAL I\/O interface for remote control of the source. Using the supplied software, it is possible to record and display the consumption or charging characteristics of the connected load in real time on the connected PC in an Excel table or in a graph, and based on SCPI communication commands it can communicate with the computer. Regular calibrations can be performed by software.\u003cbr\/\u003eThe source contains a temperature-controlled fan, long-term temperature overload of the transformer of the laboratory source is monitored by sensors that turn the source off when the limit value is reached and turn it on again after cooling down.\u003cbr\/\u003e\u003cbr\/\u003e\u003cbr\/\u003eProduct parameters :\u003cbr\/\u003e\u003cbr\/\u003e- fine adjustment of currents and voltages in both channels CH1 and CH2\u003cbr\/\u003e- six four-digit displays for immediate control of voltages, currents and powers in channels CH1 and CH2\u003cbr\/\u003e- voltage setting 0 to 30V with a resolution of 10mV\u003cbr\/\u003e- setting currents from 0 to 5A with a resolution of 1mA\u003cbr\/\u003e- operation of channels CH1 and CH2 in constant voltage, constant current modes\u003cbr\/\u003e- possibility of internal connection of channels CH1 and CH2 in series or in parallel\u003cbr\/\u003e- overvoltage protection (OVP), overcurrent protection (OCP), temperature protection (OTP)\u003cbr\/\u003e- channel CH3 with a fixed voltage of 1.8V; 2.5V; 3.3V or 5.0V max. 3.2A\u003cbr\/\u003e- channel CH4 on the USB connector on the front panel for charging e.g. a mobile phone\u003cbr\/\u003e- built-in buzzer to indicate change of states\u003cbr\/\u003e- locking buttons to prevent unwanted parameter changes\u003cbr\/\u003e- USB-Device interface, RS232, DIGITAL I\/O on the rear panel\u003cbr\/\u003e- temperature-controlled cooling fan\u003cbr\/\u003e- disconnection from the power supply in case of thermal overload of the transformer\u003cbr\/\u003e- on the back, input voltage selector 110V\/120V\/220V\/230V (AC 50\/60Hz)\u003cbr\/\u003e\u003cbr\/\u003e\u003cbr\/\u003eTechnical parameters :\u003cbr\/\u003e\u003cbr\/\u003e- nominal output voltage CH1 and CH2: \t\t\t0 to 30V\u003cbr\/\u003e- nominal output current CH1 and CH2: \t\t\t0 to 5A\u003cbr\/\u003e- total nominal output power: \t\t\t\t315W\u003cbr\/\u003e- voltage\/current setting resolution (CH1 and CH2): \t\t10mV\/1mA\u003cbr\/\u003e- in (CV) mode, accuracy of voltage setting (CH1 and CH2): \t? (0.01% of measured value +3mV, at current ? 3A)\u003cbr\/\u003e- in (CV) mode, accuracy of voltage setting (CH1 and CH2): \t? (0.02% of measured value +5mV, at current \u003e 3A)\u003cbr\/\u003e- in (CC) mode, current setting accuracy (CH1 and CH2): \t? (0.2% of measured value +3mA)\u003cbr\/\u003e- noise and hum (20Hz to 20MHz) on CH1 and CH2 outputs: \t?1mV RMS \/ ?3mA RMS\u003cbr\/\u003e- nominal output voltage (accuracy)\/current CH3: \t\t1.8V; 2.5V; 3.3V; 5.0V (±3%, can be set precisely)\/max. 3.2A\u003cbr\/\u003e- noise and hum (20Hz to 20MHz) on CH3 output: \t\t?2mV\u003cbr\/\u003e- output voltage\/max. current in channel CH4 (USB): \t\t5V ± 0.25V\/2A\u003cbr\/\u003e- temperature coefficient of voltage\/\/current: \t\t? 300ppm\/°C \/\/ ? 300ppm\/°C\u003cbr\/\u003e- rated supply voltage: \t\t\t\tAC 110V\/120V\/220V\/230V \/ (50\/60Hz)\u003cbr\/\u003e- protection (at 110\/120V\/AC power supply): \t\ttube fuse type: T6.3AL\/250V (20x5mm)\u003cbr\/\u003e- protection (with 220\/230\/AC power supply): \t\ttube fuse type: T3,13AL\/250V (20x5mm)\u003cbr\/\u003e- dimensions (width x height x depth): \t\t\t240 x 168 x 347mm\u003cbr\/\u003e- weight: \t\t\t\t\t\tapprox. 10,2 kg\u003cbr\/\u003e- gross weight of the carton: \t\t\t\t12 kg\u003cbr\/\u003e\u003cbr\/\u003e\u003cbr\/\u003eContents of individual packaging :\u003cbr\/\u003e\u003cbr\/\u003e- laboratory source UDP3305C: \t\t\t\t1 pc\u003cbr\/\u003e- power cable: \t\t\t\t\t1 pc\u003cbr\/\u003e- interface cable USB-A – USB-B (UT-D14): \t\t1 pc\u003cbr\/\u003e- set of connection cables with alligator clips: \t\t1 set\u003cbr\/\u003e- spare fuses: \t\t\t\t\t1 pc\u003cbr\/\u003e- instructions for use: \t\t\t\t1 pc\u003cbr\/\u003e- on order RS232 communication cable: \t\t\t1 pc\u003cbr\/\u003e\u003cbr\/\u003e\u003cbr\/\u003ePackaging for bulk customers :\u003cbr\/\u003e\u003cbr\/\u003e- standard quantity per carton: \t\t\t\t2 pcs\u003cbr\/\u003e- standard carton dimensions: \t\t\t\t445 x 365 x 300 mm\u003cbr\/\u003e\u003cbr\/\u003e\u003cbr\/\u003eMANUFACTURER: UNI-T\u003cbr\/\u003ewww.uni-t.cz\u003cbr\/\u003e\u003cbr\/\u003e\u003cbr\/\u003ePC link software download link:\u003cbr\/\u003ehttps:\/\/instruments.uni-trend.com\/EU-EN\/powersupplies\/udp3300.html\u003cbr\/\u003e\u003cbr\/\u003e","brand":"UNI-T","offers":[{"title":"Default Title","offer_id":52556748980562,"sku":"04220240","price":8990.0,"currency_code":"CZK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0954\/9624\/1490\/files\/04220240_1308940d-5db2-4813-b513-8a9e4372cfca.png?v=1787842135"},{"product_id":"zdroj-laboratorni-geti-glps6005h-0-60v-0-5a","title":"Laboratory power supply GETI GLPS6005H  0-60V\/ 0-5A","description":"This product comes with a 3-year warranty.\u003cbr\/\u003e\u003cbr\/\u003eLaboratory power supply Geti GLPS 6005H is intended for powering various electronic devices. It smoothly regulates the output voltage and output current. It reliably maintains the set values ??regardless of fluctuations in the supply voltage or the connected load. The output voltage is adjustable between 0V - 60V and the output current is adjustable 0A - 5A. The stability and ripple factor of the source are very good. The device can be operated as a source of constant voltage or as a source of constant current. The device is equipped with short-circuit protection so that in case of an unexpected event it is safe for the user and at the same time it is not destroyed. The power supply is suitable for work in laboratories, workshops, electronics production lines, companies repairing household appliances, DIY, but also as a teaching aid in schools.\u003cbr\/\u003e\u003cbr\/\u003e\u003cbr\/\u003eProduct parameters:\u003cbr\/\u003e\u003cbr\/\u003e- single-channel direct current source\u003cbr\/\u003e- adjustable voltage and current\u003cbr\/\u003e- backlit triple LED display for U(V), I(A) and P(W)\u003cbr\/\u003e- high-quality and compact design\u003cbr\/\u003e- overload protection\u003cbr\/\u003e- USB 5V \/ 2A\u003cbr\/\u003e\u003cbr\/\u003e\u003cbr\/\u003eTechnical parameters:\u003cbr\/\u003e\u003cbr\/\u003e- output voltage range: DC 0 - 60 V, coarse+fine regulation\u003cbr\/\u003e- output current range: 0 - 5 A, coarse+fine regulation\u003cbr\/\u003e- supply voltage: 220-230V AC, 50 Hz\u003cbr\/\u003e\u003cbr\/\u003eConstant voltage condition:\u003cbr\/\u003e- voltage stability ?0.2% ± 3 mV\u003cbr\/\u003e- low voltage 0.3 - 0.4% ± 3 mV\u003cbr\/\u003e- load stability ?0.5% ± 3 mV\u003cbr\/\u003e- ripple and noise ?150mVp-p\u003cbr\/\u003e\u003cbr\/\u003eConstant Current Status:\u003cbr\/\u003e- current stability ?0.2% ± 3 mA\u003cbr\/\u003e- load stability ?0.2% ± 3 mA\u003cbr\/\u003e- ripple and noise ?20mAms\u003cbr\/\u003e\u003cbr\/\u003e- display accuracy: 0.5% ± 2 digits\u003cbr\/\u003e- display resolution: voltage 00.01 V \/ 0.01 V\u003cbr\/\u003e- display resolution: current 0.001 A \/ 0.01 A\u003cbr\/\u003e- working temperature 0 °C - 40 °C\u003cbr\/\u003e- operating humidity \u003c80% RH\u003cbr\/\u003e- weight: 1.4 kg\u003cbr\/\u003e- dimensions: 220 x 85 x 150 mm\u003cbr\/\u003e- standard fuse: T5A","brand":"GETI","offers":[{"title":"Default Title","offer_id":53044237304146,"sku":"04220277","price":2690.0,"currency_code":"CZK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0954\/9624\/1490\/files\/04220277_404f83bf-926a-40ea-b072-14b7c3a4474d.png?v=1776148439"},{"product_id":"zdroj-laboratorni-geti-glps1203h-0-120v-0-3a","title":"Laboratory power supply GETI GLPS1203H  0-120V\/ 0-3A","description":"This product comes with a 3-year warranty.\u003cbr\/\u003e\u003cbr\/\u003eThe Geti GLPS 1203H laboratory power source is intended for powering a variety of electronic devices. It smoothly regulates the output voltage and output current. It reliably maintains the set values ??regardless of fluctuations in the supply voltage or the connected load. The output voltage is adjustable between 0V - 120V and the output current is adjustable 0A - 3A. The stability and ripple factor of the source are very good. The device can be operated as a source of constant voltage or as a source of constant current. The device is equipped with short-circuit protection so that in case of an unexpected event it is safe for the user and at the same time it is not destroyed. The power supply is suitable for work in laboratories, workshops, electronics production lines, companies repairing household appliances, DIY, but also as a teaching aid in schools.\u003cbr\/\u003e\u003cbr\/\u003e\u003cbr\/\u003eProduct parameters:\u003cbr\/\u003e\u003cbr\/\u003e- single-channel direct current source\u003cbr\/\u003e- adjustable voltage and current\u003cbr\/\u003e- backlit triple LED display for U(V), I(A) and P(W)\u003cbr\/\u003e- high-quality and compact design\u003cbr\/\u003e- overload protection\u003cbr\/\u003e- USB 5V \/ 2A\u003cbr\/\u003e\u003cbr\/\u003e\u003cbr\/\u003eTechnical parameters:\u003cbr\/\u003e\u003cbr\/\u003e- output voltage range: DC 0 - 120 V, coarse+fine regulation\u003cbr\/\u003e- output current range: 0 - 3 A, coarse+fine regulation\u003cbr\/\u003e- supply voltage: 220-230V AC, 50 Hz\u003cbr\/\u003e\u003cbr\/\u003eConstant voltage condition:\u003cbr\/\u003e- voltage stability ?0.2% ± 3 mV\u003cbr\/\u003e- low voltage 0.3 - 0.4% ± 3 mV\u003cbr\/\u003e- load stability ?0.5% ± 3 mV\u003cbr\/\u003e- ripple and noise ?150mVp-p\u003cbr\/\u003e\u003cbr\/\u003eConstant Current Status:\u003cbr\/\u003e- current stability ?0.2% ± 3 mA\u003cbr\/\u003e- load stability ?0.2% ± 3 mA\u003cbr\/\u003e- ripple and noise ?20mAms\u003cbr\/\u003e\u003cbr\/\u003e- display accuracy: 0.5% ± 2 digits\u003cbr\/\u003e- display resolution: voltage 00.01 V \/ 0.01 V\u003cbr\/\u003e- display resolution: current 0.001 A \/ 0.01 A\u003cbr\/\u003e- working temperature 0 °C - 40 °C\u003cbr\/\u003e- operating humidity \u003c80% RH\u003cbr\/\u003e- weight: 1.4 kg\u003cbr\/\u003e- dimensions: 220 x 85 x 150 mm\u003cbr\/\u003e- standard fuse: T5A","brand":"GETI","offers":[{"title":"Default Title","offer_id":53044237435218,"sku":"04220278","price":3290.0,"currency_code":"CZK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0954\/9624\/1490\/files\/04220278_b1ee44c7-9b29-4ed0-ac28-6b209ddfab41.png?v=1776148440"},{"product_id":"zdroj-laboratorni-geti-glps3010h-0-30v-0-10a","title":"Laboratory power supply GETI GLPS3010H  0-30V\/ 0-10A","description":"This product comes with a 3-year warranty.\u003cbr\/\u003e\u003cbr\/\u003eThe Geti GLPS 3010H laboratory power source is intended for powering various electronic devices. It smoothly regulates the output voltage and output current. It reliably maintains the set values ??regardless of fluctuations in the supply voltage or the connected load. The output voltage is adjustable between 0V - 30V and the output current is adjustable between 0A - 10A. The stability and ripple factor of the source are very good. The device can be operated as a source of constant voltage or as a source of constant current. The device is equipped with short-circuit protection so that in case of an unexpected event it is safe for the user and at the same time it is not destroyed. The power supply is suitable for work in laboratories, workshops, electronics production lines, companies repairing household appliances, DIY, but also as a teaching aid in schools.\u003cbr\/\u003e\u003cbr\/\u003e\u003cbr\/\u003eProduct parameters:\u003cbr\/\u003e\u003cbr\/\u003e- single-channel direct current source\u003cbr\/\u003e- adjustable voltage and current\u003cbr\/\u003e- backlit triple LED display for U(V), I(A) and P(W)\u003cbr\/\u003e- high-quality and compact design\u003cbr\/\u003e- overload protection\u003cbr\/\u003e- USB 5V \/ 2A\u003cbr\/\u003e\u003cbr\/\u003e\u003cbr\/\u003eTechnical parameters:\u003cbr\/\u003e\u003cbr\/\u003e- output voltage range: DC 0 - 30 V, coarse+fine regulation\u003cbr\/\u003e- output current range: 0 - 10 A, coarse+fine regulation\u003cbr\/\u003e- supply voltage: 220-230V AC, 50 Hz\u003cbr\/\u003e\u003cbr\/\u003eConstant voltage condition:\u003cbr\/\u003e- voltage stability ?0.1% ± 3 mV\u003cbr\/\u003e- low voltage 0.2 - 0.3% ± 3 mV\u003cbr\/\u003e- load stability ?0.5% ± 3 mV\u003cbr\/\u003e- ripple and noise ?10mVrms \/ ?150mVp-p\u003cbr\/\u003e\u003cbr\/\u003eConstant Current Status:\u003cbr\/\u003e- current stability ?0.2% ± 3 mA\u003cbr\/\u003e- load stability ?0.2% ± 3 mA\u003cbr\/\u003e- ripple and noise ?20mAms\u003cbr\/\u003e\u003cbr\/\u003e- display accuracy: 0.5% ± 2 digits\u003cbr\/\u003e- display resolution: voltage 00.01 V \/ 0.01 V\u003cbr\/\u003e- display resolution: current 0.001 A \/ 0.01 A\u003cbr\/\u003e- working temperature 0 °C - 40 °C\u003cbr\/\u003e- operating humidity \u003c80% RH\u003cbr\/\u003e- weight: 1.4 kg\u003cbr\/\u003e- dimensions: 220 x 85 x 150 mm\u003cbr\/\u003e- standard fuse: T5A","brand":"GETI","offers":[{"title":"Default Title","offer_id":53044420641106,"sku":"04220276","price":2290.0,"currency_code":"CZK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0954\/9624\/1490\/files\/04220276_90d3baf3-9a35-42e7-a8dc-f8cdde5a6ab9.png?v=1776148438"},{"product_id":"zdroj-laboratorni-geti-glps3010hw-0-30v-0-10a","title":"Laboratory power supply GETI GLPS3010HW  0-30V\/ 0-10A","description":"This product comes with a 3-year warranty.\u003cbr\/\u003e\u003cbr\/\u003eThe Geti GLPS 3010HW laboratory power source is intended for powering various electronic devices. It smoothly regulates the output voltage and output current. It reliably maintains the set values ??regardless of fluctuations in the supply voltage or the connected load. The output voltage is adjustable between 0V - 30V and the output current is adjustable between 0A - 10A. The stability and ripple factor of the source are very good. The device can be operated as a source of constant voltage or as a source of constant current. The device is equipped with short-circuit protection so that in case of an unexpected event it is safe for the user and at the same time it is not destroyed. The power supply is suitable for work in laboratories, workshops, electronics production lines, companies repairing household appliances, DIY, but also as a teaching aid in schools.\u003cbr\/\u003e\u003cbr\/\u003e\u003cbr\/\u003eProduct parameters:\u003cbr\/\u003e\u003cbr\/\u003e- single-channel direct current source\u003cbr\/\u003e- adjustable voltage and current\u003cbr\/\u003e- backlit triple LED display for U(V), I(A) and P(W)\u003cbr\/\u003e- high-quality and compact design\u003cbr\/\u003e- overload protection\u003cbr\/\u003e- USB 5V \/ 2A\u003cbr\/\u003e\u003cbr\/\u003e\u003cbr\/\u003eTechnical parameters:\u003cbr\/\u003e\u003cbr\/\u003e- output voltage range: DC 0 - 30 V, coarse+fine regulation\u003cbr\/\u003e- output current range: 0 - 10 A, coarse+fine regulation\u003cbr\/\u003e- supply voltage: 220-230V AC, 50 Hz\u003cbr\/\u003e\u003cbr\/\u003eConstant voltage condition:\u003cbr\/\u003e- voltage stability ?0.1% ± 3 mV\u003cbr\/\u003e- low voltage 0.2 - 0.3% ± 3 mV\u003cbr\/\u003e- load stability ?0.5% ± 3 mV\u003cbr\/\u003e- ripple and noise ?10mVrms \/ ?150mVp-p\u003cbr\/\u003e\u003cbr\/\u003eConstant Current Status:\u003cbr\/\u003e- current stability ?0.2% ± 3 mA\u003cbr\/\u003e- load stability ?0.2% ± 3 mA\u003cbr\/\u003e- ripple and noise ?20mAms\u003cbr\/\u003e\u003cbr\/\u003e- display accuracy: 0.5% ± 2 digits\u003cbr\/\u003e- display resolution: voltage 00.01 V \/ 0.01 V\u003cbr\/\u003e- display resolution: current 0.001 A \/ 0.01 A\u003cbr\/\u003e- working temperature 0 °C - 40 °C\u003cbr\/\u003e- operating humidity \u003c80% RH\u003cbr\/\u003e- weight: 1.4 kg\u003cbr\/\u003e- dimensions: 220 x 85 x 150 mm\u003cbr\/\u003e- standard fuse: T5A","brand":"GETI","offers":[{"title":"Default Title","offer_id":53047454138706,"sku":"04220307","price":2290.0,"currency_code":"CZK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0954\/9624\/1490\/files\/04220307_d3aa8aff-1c04-4be0-bba9-ccd9fdf170a7.png?v=1776148715"},{"product_id":"zdroj-laboratorni-uni-t-udp3305s","title":"DC Power Supply UNI-T UDP3305S","description":"This product comes with a 3-year warranty.\u003cbr\/\u003e\u003cbr\/\u003eProgrammable linear DC power supply UNI-T UDP3305S - UDP3000S series is a high-performance programmable linear DC power supply. It has a clear LCD user interface, excellent performance indicators, a number of analytical functions and communication interfaces. It can meet the diverse testing needs of users.\u003cbr\/\u003eIts goal is to provide affordable programmable DC power supplies for education, scientific research, industry and other fields.\u003cbr\/\u003e4 channels, CH1\/CH2: 0~30V\/0~5A, CH3: 0~6V\/0~3A, CH4: 5V\/2A, Resolution: 1mV\/1mA, Power: 328W, Accuracy: \u003c0.03%+10mV\/\u003c0.2%+5mA, USB\/RS232\/LAN, Digital I\/O\u003cbr\/\u003e\u003cbr\/\u003e\u003cbr\/\u003eProduct parameters:\u003cbr\/\u003e\u003cbr\/\u003e- split screen function\u003cbr\/\u003e- value monitoring in real time\u003cbr\/\u003e\u003cbr\/\u003eLCD interactive interface:\u003cbr\/\u003e- using a 4.3 inch high-definition display, it provides users with an interface with rich functions and easy operation, which can display the current set output voltage\/current, the actual output voltage\/current and the protection of the power supply output value in real time. The functional interface is simple and complex, easy to operate\u003cbr\/\u003e\u003cbr\/\u003eList\/Delay Functions:\u003cbr\/\u003e- with list and delay setting functions, up to 2048 sets of data can be set according to test requirements, and the number of cycles can reach 99999. It is used with waveform templates, which is very convenient for cyclic testing and aging testing\u003cbr\/\u003e\u003cbr\/\u003eOne-button setting for series and parallel connection:\u003cbr\/\u003e- series-parallel connection between CH1 and CH2 of the main channel can be implemented without an external connection, which simplifies the connection and facilitates the test\u003cbr\/\u003e\u003cbr\/\u003eExtended interface for remote control:\u003cbr\/\u003e- standard RS232 communication interface, Ethernet interface, digital I\/O and USB master and slave interfaces can be controlled by remote connection to Ethernet or via RS232 and USB using host computer software to achieve software control\u003cbr\/\u003e\u003cbr\/\u003e\u003cbr\/\u003eTechnical parameters:\u003cbr\/\u003e\u003cbr\/\u003e- model type: UDP3305\u003cbr\/\u003e- linear, multi-channel programmable laboratory power supply\u003cbr\/\u003e- number of channels: 4Ch\u003cbr\/\u003e- type of display used: LCD 4.3\"\u003cbr\/\u003e- supply voltage: 230V AC, 50Hz\u003cbr\/\u003e\u003cbr\/\u003e- output voltage: \u003cbr\/\u003e  CH1\/CH2: 0 ~ 30V DC \u003cbr\/\u003e  CH3: 0 ~ 6V DC \u003cbr\/\u003e  CH4: 5V DC\u003cbr\/\u003e- output current: \u003cbr\/\u003e  CH1\/CH2: 0~5A \u003cbr\/\u003e  CH3: 0~3A \u003cbr\/\u003e  CH4: 2A\u003cbr\/\u003e\u003cbr\/\u003e- total power: 328 W\u003cbr\/\u003e- output voltage resolution: 1mV\u003cbr\/\u003e- output current resolution: 1mA\u003cbr\/\u003e- voltage stabilization: ?0.03% + 10mV\u003cbr\/\u003e- current stabilization: ?0.2% + 5mA\u003cbr\/\u003e- interface: USB device, RS-232, LAN, USB host, digital I\/O\u003cbr\/\u003e- dimensions: 355 x 240 x 168 mm\u003cbr\/\u003e- supplied accessories: power cable, USB 2.0 print cable\u003cbr\/\u003e- transport weight: 10.2 kg\u003cbr\/\u003e\u003cbr\/\u003e\u003cbr\/\u003eManufacturer: UNI-T\u003cbr\/\u003eLink to download software for PC connection:\u003cbr\/\u003ehttps:\/\/instruments.uni-trend.com\/products\/dc-power-supplies\/UDP3000S","brand":"UNI-T","offers":[{"title":"Default Title","offer_id":53048008409426,"sku":"04220324","price":12590.0,"currency_code":"CZK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0954\/9624\/1490\/files\/04220324_82883bf1-8013-41ad-b440-3648c90b4617.png?v=1787842140"},{"product_id":"zdroj-laboratorni-uni-t-udp3305s-e","title":"DC Power Supply UNI-T UDP3305S-E","description":"This product comes with a 3-year warranty.\u003cbr\/\u003e\u003cbr\/\u003eProgrammable linear DC power supply UNI-T UDP3305S - UDP3000S series is a high-performance programmable linear DC power supply. It has a clear LCD user interface, excellent performance indicators, a number of analytical functions and communication interfaces. It can meet the diverse testing needs of users.\u003cbr\/\u003eIts goal is to provide affordable programmable DC power supplies for education, scientific research, industry and other fields.\u003cbr\/\u003e4 channels, CH1\/CH2: 0~30V\/0~5A, CH3: 0~6V\/0~3A, CH4: 5V\/2A, Resolution: 1mV\/1mA, Power: 328W, Accuracy: \u003c0.03%+10mV\/\u003c0.2%+5mA, USB\/RS232\/LAN, Digital I\/O\u003cbr\/\u003e\u003cbr\/\u003e\u003cbr\/\u003eProduct parameters:\u003cbr\/\u003e\u003cbr\/\u003e- split screen function\u003cbr\/\u003e- value monitoring in real time\u003cbr\/\u003e\u003cbr\/\u003eLCD interactive interface:\u003cbr\/\u003e- using a 4.3 inch high-definition display, it provides users with an interface with rich functions and easy operation, which can display the current set output voltage\/current, the actual output voltage\/current and the protection of the power supply output value in real time. The functional interface is simple and complex, easy to operate\u003cbr\/\u003e\u003cbr\/\u003eList\/Delay Functions:\u003cbr\/\u003e- with list and delay setting functions, up to 2048 sets of data can be set according to test requirements, and the number of cycles can reach 99999. It is used with waveform templates, which is very convenient for cyclic testing and aging testing\u003cbr\/\u003e\u003cbr\/\u003eOne-button setting for series and parallel connection:\u003cbr\/\u003e- series-parallel connection between CH1 and CH2 of the main channel can be implemented without an external connection, which simplifies the connection and facilitates the test\u003cbr\/\u003e\u003cbr\/\u003eExtended interface for remote control:\u003cbr\/\u003e- standard RS232 communication interface, Ethernet interface, digital I\/O and USB master and slave interfaces can be controlled by remote connection to Ethernet or via RS232 and USB using host computer software to achieve software control\u003cbr\/\u003e\u003cbr\/\u003e\u003cbr\/\u003eTechnical parameters:\u003cbr\/\u003e\u003cbr\/\u003e- model type: UDP3305\u003cbr\/\u003e- linear, multi-channel programmable laboratory power supply\u003cbr\/\u003e- number of channels: 4Ch\u003cbr\/\u003e- type of display used: LCD 4.3\"\u003cbr\/\u003e- supply voltage: 230V AC, 50Hz\u003cbr\/\u003e\u003cbr\/\u003e- output voltage: \u003cbr\/\u003eCH1\/CH2: 0 ~ 30V DC \u003cbr\/\u003eCH3: 0 ~ 6V DC \u003cbr\/\u003eCH4: 5V DC\u003cbr\/\u003e- output current: \u003cbr\/\u003eCH1\/CH2: 0~5A \u003cbr\/\u003eCH3: 0~3A \u003cbr\/\u003eCH4: 2A\u003cbr\/\u003e\u003cbr\/\u003e- total power: 328 W\u003cbr\/\u003e- output voltage resolution: 10mV\u003cbr\/\u003e- output current resolution: 1mA\u003cbr\/\u003e- voltage stabilization: ?0.3% + 20mV\u003cbr\/\u003e- current stabilization: ?0.2% + 5mA\u003cbr\/\u003e- interface: USB device, RS-232, LAN, USB host, digital I\/O\u003cbr\/\u003e- dimensions: 355 x 240 x 168 mm\u003cbr\/\u003e- supplied accessories: power cable, USB 2.0 print cable\u003cbr\/\u003e- transport weight: 10.2 kg\u003cbr\/\u003e\u003cbr\/\u003e\u003cbr\/\u003eManufacturer: UNI-T\u003cbr\/\u003eLink to download software for PC connection:\u003cbr\/\u003ehttps:\/\/instruments.uni-trend.com\/products\/dc-power-supplies\/UDP3000S","brand":"UNI-T","offers":[{"title":"Default Title","offer_id":53048008540498,"sku":"04220325","price":10799.0,"currency_code":"CZK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0954\/9624\/1490\/files\/04220325_5167bf2c-dfa3-4bf8-9c6a-8129818b485d.png?v=1787842144"},{"product_id":"zdroj-laboratorni-uni-t-udp6720","title":"UNI-T UDP6720 laboratory power supply","description":"We provide 3 years warranty for this product.\u003cbr\/\u003e\u003cbr\/\u003eUNI-T UDP6720 DC Power Supply is a switching power supply with wide output range and high power. It aims to provide affordable programmable DC power supplies for education, scientific research, R\u0026D, manufacturing and industry. With a higher power ratio, you can meet a wider range of applications. The bright LCD display brings a better experience of measurement and debugging.\u003cbr\/\u003e\u003cbr\/\u003e  \u003cbr\/\u003eTechnical parameters:\u003cbr\/\u003e\u003cbr\/\u003e- type: programmable switching DC power supply\u003cbr\/\u003e- number of channels: 1\u003cbr\/\u003e- maximum power: 100 W\u003cbr\/\u003e- output voltage: 0 ~ 60 V DC\u003cbr\/\u003e- output current: 0 ~ 5 A\u003cbr\/\u003e- maximum output voltage resolution: 10 mV\u003cbr\/\u003e- maximum output current resolution: 1 mA\u003cbr\/\u003e- adjustment accuracy: \u003c0.05 % + 10 mV \u003c0.2 % + 2 mA\u003cbr\/\u003e- protection: overcurrent OCP, overtemperature OTP, overvoltage OVP\u003cbr\/\u003e- connection: RS-232\u003cbr\/\u003e- type of display used: LCD TFT 2.8\"\u003cbr\/\u003e- supply voltage: 230 V AC \/ 50Hz\u003cbr\/\u003e- dimensions: 87 x 174 x 255 mm\u003cbr\/\u003e- gross weight: 2.56 kg\u003cbr\/\u003e- standard equipment: power cable","brand":"UNI-T","offers":[{"title":"Default Title","offer_id":53382019809618,"sku":"04220327","price":4499.0,"currency_code":"CZK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0954\/9624\/1490\/files\/04220327.jpg?v=1787842148"},{"product_id":"zdroj-laboratorni-uni-t-udp6721","title":"UNI-T UDP6721 laboratory power supply","description":"We provide 3 years warranty for this product.\u003cbr\/\u003e\u003cbr\/\u003eUNI-T UDP6721 DC Power Supply is a switching power supply with wide output range and high power. It aims to provide affordable programmable DC power supplies for education, scientific research, R\u0026D, manufacturing and industry. With a higher power ratio, you can meet a wider range of applications. The bright LCD display brings a better experience of measurement and debugging.\u003cbr\/\u003e\u003cbr\/\u003eTechnical parameters:\u003cbr\/\u003e\u003cbr\/\u003e- type: programmable switching DC power supply\u003cbr\/\u003e- number of channels: 1\u003cbr\/\u003e- maximum power: 180 W\u003cbr\/\u003e- output voltage: 0 ~ 60 V DC\u003cbr\/\u003e- output current: 0 ~ 8 A\u003cbr\/\u003e- maximum output voltage resolution: 10 mV\u003cbr\/\u003e- maximum output current resolution: 1 mA\u003cbr\/\u003e- setting accuracy: \u003c0.05 % + 10 mV \u003c0.3 % + 5 mA\u003cbr\/\u003e- protection: overcurrent OCP, overtemperature OTP, overvoltage OVP\u003cbr\/\u003e- connection: RS-232\u003cbr\/\u003e- type of display used: LCD TFT 2.8\"\u003cbr\/\u003e- supply voltage: 230 V AC \/ 50Hz\u003cbr\/\u003e- dimensions: 87 x 174 x 255 mm\u003cbr\/\u003e- gross weight: 2.76 kg\u003cbr\/\u003e- standard equipment: power cable","brand":"UNI-T","offers":[{"title":"Default Title","offer_id":53382019875154,"sku":"04220328","price":6090.0,"currency_code":"CZK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0954\/9624\/1490\/files\/04220328.jpg?v=1787842152"},{"product_id":"zdroj-laboratorni-uni-t-udp6731","title":"UNI-T UDP6731 laboratory power supply","description":"We provide 3 years warranty for this product.\u003cbr\/\u003e\u003cbr\/\u003eUNI-T UDP6731 DC Power Supply is a switching power supply with wide output range and high power. It aims to provide affordable programmable DC power supplies for education, scientific research, R\u0026D, manufacturing and industry. With a higher power ratio, you can meet a wider range of applications. The bright LCD display brings a better measurement and debugging experience.\u003cbr\/\u003e\u003cbr\/\u003eTechnical parameters:\u003cbr\/\u003e\u003cbr\/\u003e- type: programmable switching DC power supply\u003cbr\/\u003e- number of channels: 1\u003cbr\/\u003e- maximum power: 360 W\u003cbr\/\u003e- output voltage: 0 ~ 80 V DC\u003cbr\/\u003e- output current: 0 ~ 15 A\u003cbr\/\u003e- maximum output voltage resolution: 10 mV\u003cbr\/\u003e- maximum output current resolution: 1 mA\u003cbr\/\u003e- adjustment accuracy: \u003c0.1 % + 10 mV \u003c0.3 % + 10 mA\u003cbr\/\u003e- protection: overcurrent OCP, overtemperature OTP, overvoltage OVP\u003cbr\/\u003e- connection: RS-232\u003cbr\/\u003e- type of display used: LCD TFT 2.8\"\u003cbr\/\u003e- supply voltage: 230 V AC \/ 50Hz\u003cbr\/\u003e- dimensions: 87 x 174 x 255 mm\u003cbr\/\u003e- gross weight: 2.97 kg\u003cbr\/\u003e- standard equipment: power cable","brand":"UNI-T","offers":[{"title":"Default Title","offer_id":53637300453714,"sku":"04220329","price":10950.0,"currency_code":"CZK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0954\/9624\/1490\/files\/04220329.jpg?v=1787842156"}],"url":"https:\/\/tipa.eu\/en-en\/collections\/bench-power-supplies.oembed","provider":"TIPA","version":"1.0","type":"link"}